Answer:
35.4 cm
Explanation:
We have that when the level of mercury on either limb is the same, the pressure of the trapped air, P₁ = Atmospheric pressure
Also the initial height of the mercury in the tube = The reading of the barometer = 75.0 cm
The initial length of the air column, l₁ = 6.3 cm
The final length of the air column, l₂ = 4.2 cm (The length is expected to decrease due to compression)
The volume, V = l × A
Where;
A = The cross sectional area of the tube
Therefore, the volume of the air column is directly proportional to the length of the air column
∴ V ∝ l
According to Boyles law, we have;
P₁·V₁ = P₂·V₂
Where;
P₁ = The initial pressure in the air column before more mercury is added
V₁ = The initial volume occupied by the air in the air column
P₂, and V₂ are the final pressure and volume of the air column respectively
Given that V = l·A, we can write;
P₁·l₁·A = P₂·l₂·A
P₂ = P₁·l₁·A/(l₂·A) = P₁·l₁/(l₂) = P₁ × 6.3/4.2 = 1.5·P₁
The pressure in the air column after more mercury is added, P₂ = 1.5 × P₁
P₁ = Atmospheric pressure, therefore;
The pressure in the air column after more mercury is added, P₂ = 1.5 × Atmospheric pressure
Pressure = h·ρ·g
Where;
ρ = The density of the substance
g = The acceleration due to gravity
h = The height of the column of the fluid
Given that the density and the gravitational force, can be taken as constant, we have that the pressure of the fluid is directly proportional to the height of the fluid column
Therefore, when the pressure doubles, the height of the fluid column doubles, and when the factor of increase is 1.5, we have;
The final level of the mercury, h₂ = 1.5·h₁ = 1.5×75 cm = 112.5 cm
The initial length of the closed end of the J tube, [tex]h_{closed1}[/tex] = 6.3 cm + 75 cm = 81.3 cm
The final length of the mercury in the closed end, [tex]h_{closed2}[/tex] = 81.3 cm - 4.2 cm = 77.1 cm
The difference in the level of mercury, Δh = h₂ - [tex]h_{closed2}[/tex]
∴ Δh = 112.5 cm - 77.1 cm = 35.4 cm
The difference in the levels of mercury in the limbs, Δh = 35.4 cm
One possible unit of speed is
Answer:
option d
Explanation:
Meter per second
Define length.Convert 20cm into meter
Now
[tex]\\ \sf\longmapsto 20cm[/tex]
[tex]\\ \sf\longmapsto 2\times 10^{-1}[/tex]
[tex]\\ \sf\longmapsto 0.1m[/tex]
importance of estimation in our lives
Trong thí nghiệm về sự khúc xạ ánh sáng, một học sinh ghi lại trên tấm bìa ba đường truyền của ánh sáng như hình bên nhưng quên không ghi chiều truyền.
Tia khúc xạ là
Answer:
I R 2
Explanat
mot o to ro ben luc 6h voi van toc toc 40 km/h
Answer:
? có thể cụ thể hơn ko
Explanation:
Lightning a. occurs when a positively charged cloud base induces a negative charge on the Earth's surface. b. travels most often from cloud to ground and cannot travel from cloud to cloud. c. may be accompanied by the sound of explosively expanding hot air, called thunder. d. involves a conductive path or leader of positive ions from cloud to ground.
Answer:
c. may be accompanied by the sound of explosively expanding hot air, called thunder.
Explanation:
Lightning is a discharge which is due to the reaction between oppositely charged charges in the clouds, or between clouds base and the Earth surface.
The motion of the cloud causes charging of clouds by friction, thus the reaction between opposite charges (jumping of charges from one cloud to another) in the cloud can lead to lightning. Also, oftentimes the bottom of a cloud is negatively charged so that this is attracted to the positive charge on the earth surface. Thus leading to a discharge called lightning.
Thus in the given question, the appropriate option is C. This implies that, lightning may be accompanied by the sound of explosively expanding hot air, called thunder.
can someone please help me with a and b? what do they mean by amplitude?
Explanation:
first answer is that the to and fro movement of a pendulum is known as amplitude
A car has a mass of 2000 kg. While it is traveling along a perfectly flat road, it goes around an unbanked turn that has a radius of 40.0 m. The coefficient of static friction between the car tires and the road is 0.500. The car travels successfully around the turn at a constant speed of 10.0 m/s. Calculate the magnitude of the car's acceleration as it goes around the turn. _______ m/s^2
Answer:
2.5 m/s²
Explanation:
The given parameters are;
The mass of the car, m = 2,000 kg
The radius of the car, r = 40.0 m
The coefficient of friction between the car tires and the road, μ = 0.500
The constant speed with which the car moves, v = 10.0 m/s
The normal reaction of the road on the car, N = The weight of the car;
∴ N = m × g
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
N ≈ 2,000 kg × 9.81 m/s² = 19,620 N
The frictional force, [tex]F_f[/tex] = μ × N
The centripetal force, [tex]F_c[/tex] = m·v²/r
The car moves without slipping when [tex]F_f[/tex] = [tex]F_c[/tex]
Therefore, [tex]F_f[/tex] = 0.500 × 19,620 N = 2,000 kg × [tex]v_{max}[/tex]²/40.0 m
∴ [tex]v_{max}[/tex] = √(0.500 × 19,620 N × 40.0 m/2,000 kg) ≈ 14.007 m/s
Therefore, the velocity with which the car moves, v < [tex]v_{max}[/tex]
The cars centripetal acceleration, [tex]a_c[/tex] = v²/r
∴ [tex]a_c[/tex] = (10.0 m/s)²/40.0 m = 2.5 m/s²
The cars centripetal acceleration as it goes round the turn, [tex]a_c[/tex] = 2.5 m/s².
A school bus in the oncoming lane of a 4-lane road is flashing. You should: * 1 point
-
O A. Stop until the flashing red lights turn off.
O B. Stop only if children are unloading:
O C. Wait until the flashing lights are yellow.
O D. Use caution as you pass the bus.
Answer:
A
Explanation:
and that is a very strange question in physics ...
it actually depends on what state you are in.
California for example requires all to stop unconditionally, I think. while in many other states it is the rule, if the 4-lane road is separating both driving direction by a barrier or raised intermediate area, you don't have to stop when going in the opposite direction.
so, it is either A or D depending on your state.
B and C never apply.
Answer:
Question
A school bus in the oncoming lane of a 4-lane road is flashing. You should:
[tex]====================================[/tex]
ANSWER
A. Stop until the flashing red lights turn off.
[tex]====================================[/tex]
#CarryOnLearning
(ʘᴗʘ✿)
Answer:
Question
A school bus in the oncoming lane of a 4-lane road is flashing. You should:
[tex]====================================[/tex]
ANSWER
A. Stop until the flashing red lights turn off.
[tex]====================================[/tex]
#CarryOnLearning
(ʘᴗʘ✿)
calculate the potential energy stored in a meta ball of mass of 80 kg kept at a height of 15m from the earth surface . What will be the potential energy when the metal ball is kept on the earth surface Take (g- 9.8 m/s]
Answer:
11760 J
Explanation:
cuz potential engery is PE = MHG
SO 80×15×9.8= 11760 J
Answer:
11769j
Explanation:
here,
mass(m)=80 kg
height(h)=15m
acceleration due to gravity(g)=9.8m/s^2
now,
potential energy = m×g×h
= 80×9.8×15
= 11760j
Which of the following statements regarding the visible spectrum of light is
accurate?
It represents only a very small fraction of the entire electromagnetic spectrum.
O It can be detected only through the use of thermal imaging equipment.
The wavelength of visible light falls between gamma rays and X-rays along the
spectrum.
It has the longest wavelength of all types of waves along the electromagnetic
spectrum
Answer:
It represents only a very small fraction of the entire electromagnetic spectrum.
Explanation:
The visible spectrum of light makes up only a very small part of the electromagnetic spectrum. The wavelength of visible light is longer than ultraviolet waves but shorter than infrared waves.
According to Hooke's law
(a) stress x strain = constant
(b) stress / strain = constant
(c) strain / stress = constant
(d) stress = strain
Answer:
According to Hook's law, we know,
strain/stress =Constant
Explanation: So, the ratio between stress and strain is always constant.
So, if stress is increased, then strain changes in that way so that this ratio always remains constant.
Calculate the upthrust on a object immersed in water if the object displace water of mass 2 kg.(g=9.8m/s²)
Thrust is force
Mass=2kgAcceleration due to gravity=g=9.8m/s^2Using Newtons Second law
[tex]\boxed{\sf Force=Mass\times Acceleration}[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Thrust=2(9.8)[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Thrust=19.6N[/tex]
We have that the the upthrust on a object immersed in water is
[tex]U=19.6N[/tex]
From the Question we are told that
mass= 2kg
Gravity g=9.8m/s^2
Generally the equation for the upthrust is mathematically given as
[tex]U=mg[/tex]
Therefore
[tex]U=2*9.8[/tex]
[tex]U=19.6N[/tex]
For more information on this visit
https://brainly.com/question/1519601
is noise energy a kind of energy or not
light travels 3,00,000 km/s . Is it velocity or speed?
Answer:
speed
Explanation:
according to your question, your answer is speed
Hideki had normal vision for most of his life, but now that he is in his 60s, he has started to have difficulty focusing on near objects. He went to an optometrist, who explained that his vision problem was the result of the lenses in his eyes losing elasticity due to aging. Which condition does Hideki have
Answer:
He is suffering from hypermetropia.
Explanation:
There are some defects of vision.
Longsightedness of hypermetropia : It is the defect of vision in which the person is not able to see the nearby objects clearly but can see the far off objects clearly. This is due to the elongation of size of eye ball. It is cured by using convex lens of suitable focal length.
Nearsightedness or Myopia : It is the defect of vision in which a person is not able to see the far off objects clearly but can see the nearby objects clearly. It is due to the contraction in the size of eye ball. It is cured by using concave lens of suitable focal length.
So, Hideki is suffering from hypermetropia. So, he should use the convex lens of suitable focal length.
solve two questions under inclined plane using Newton 2nd law
Explanation:
If the mass of the inclined plane is large enough, could N ever be equal to mgcosθ. Reasons?
So far I've come up with: mgcosθ−N=ma meaning if N were to equal mgcosθ, ma=0. Since the surfaces are frictionless and since N is acting on the inclined plane too(it'll have a horizontal component), this isn't possible. Am I right? Where am I going wrong?
Wat is acceleration!!!!!
Answer:
Acceleration is the rate of change of velocity with time.its system international unit is meters per second square.
I hope this helps
At what conditions acceleration of a body is zero?
Answer:
when there is uniform velocity the acceleration of a body is zero
A variable is a letter that stands in for a number and unit... True or False?
........................
Answer:
14°F = 263.15 K
31°F = 272.594 K
71°F = 294.817 K
35°F = 274.817 K
Explanation:
Use the formula 273.15 + ((°F–32)•5)/9
The sky is blue because: Select one: a. the index of refraction for air is slightly larger for blue than for red b. atomic hydrogen is blue c. air molecules tend to polarize light along a horizontal axis d. oxygen and nitrogen molecules are small compared to the wavelengths of visible light e. oxygen molecules have a lower energy ground state than nitrogen molecules
Answer:
a. the index of refraction for air is slightly larger for blue than for red
A water heater marked 4 kW takes 4 minutes to heat 1 kg of water from 20 °C to 50 °C. The cost of electrical energy per kWh
is $0.120. What will be the total cost of energy consumption?
The total cost of the energy consumption for the given time period is $0.0364
The given parameters include;
power rating of the heater, P = 4 kW = 4000 Wtime taken to completely boil the water,[tex]t = 4 \min = 4 \min \times \frac{1 \ h}{60 \ \min} = 0.067 \ h[/tex]mass of the water, m = 1 kginitial temperature of the water, t₁ = 20 ⁰Cfinal temperature of the water, t₂ = 50 ⁰Cspecific heat capacity of water, c = 4200 J/kg⁰Ccost of electrical energy = $0.12The total energy consumed in the process of heating the water;
Total electrical Energy = Energy of the heater (kWh) + Energy of the heated water (kWh)
Energy of the heater (kWh) = power x time
= 4 kW x 0.067 h
= 0.268 kWh
Energy of the heated water (J) = mcΔt
where;
Δt is the change in temperature = t₂ - t₁
= 50 ⁰C - 20 ⁰C = 30⁰C
Energy of the heated water (J) = 1 x 4200 x 30
= 126,000 J
Electrical power of the heated water (Watts) = [tex]\frac{126,000 \ J}{4 \ \min} \times \frac{1 \min}{60 \ s} = 525 \ W[/tex]
Energy of the heated water (kWh) = [tex]\frac{525}{1000} \times 4\min\times \frac{1 \ hr}{60 \min} = 0.035 \ kWh[/tex]
Total electrical Energy = 0.268 kWh + 0.035 kWh
= 0.303 kWh
The total cost of the energy consumed is calculated as;
[tex]Total \ cost = \frac{\$ \ 0.12}{kWh} \times 0.303 \ kWh = \$ \ 0.0364[/tex]
Therefore, the total cost of the energy consumption is $0.0364
To learn more about cost of electrical energy calculation, please visit: https://brainly.com/question/17924004
A bucket filled woth water seems light while it sinks into water.Also show their relation using formula
Answer: This phenomenon happens due to upthrust exerted by water.
Explanation:
We know that,
Liquid Pressure is directly proportional to the height of the vertical column in the liquid.(P∝h)
When a bucket filled water is sunk into the water container, there occur difference in the pressure in top and bottom of the water container. Due to this, water exerts an upward force on the bucket filled with water. This is called Uprthrust.
Upthrust on the bucket makes the bucket filled with water lose some of it's weight and causes apparent loss in weight.
Hence, the bucket filled with water seems light while it sinks into water.
what is the definition of unit?definition of unit?
Answer:
The Reference standard with which we carry out the measurement of any physical quantity of the same kind is know as unit .
I HOPE I HELP YOU.
Answer:
The standard quantity which is used for the comparison with an unknown quantity is called unit.
Unit is a known or standard quantity in terms of which other physical quantities are measured.
for examples;kilogram,metre,second,etc.
Explanation:
hope it helps you
Choose the option that best suit the question .
An inclined plane of angle Ɵ, acting as a simple machine has a velocity ratio :
(a) sinƟ
(b) 1/sinƟ
(c) cosƟ
(d) 1/cosƟ
(e) sinƟcosƟ
Answer:
(b) 1/sinƟ
Explanation:
A simple machine can be defined as a type of machine with no moving parts but can be used to perform work.
Basically, a simple machine allows for the transformation of energy into work. The six simple machines are; lever, wedge, pulley, screw, wheel and axle, and inclined plane.
Inclined plane is a simple machine set at an angle and then used to lift an object.
In Physics, the velocity ratio of a simple machine is calculated as a ratio of the distance moved by the effort to the vertical distance through which a load is raised.
Mathematically, the velocity ratio of an inclined plane of angle Ɵ, acting as a simple machine is given by the formula;
Velocity ratio (V.R) = 1/sinƟ
Basically, an increase in the angle of inclination (measured in degrees) of an inclined plane increases its velocity ratio.
In----- theory, the actual wishes that are threatening to the dreamers conscious awareness are disguised
Answer:
Unconscious wish fulfillment
Explanation:
Unconscious wish fulfillment
(In the unconscious wish fulfillment theory, the actual wishes of the dreamer that are threatening to the dreamer's conscious awareness are disguised.)
resistances is inversely proprtional to___of the conductor
Answer:
resistances is inversely proportional to the area of cross section of the conductor
Explanation:
The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area.
hope this helps you
have a nice day:)
Invisible damage to the body resulting from repeating a movement often is a
Resistivity of metallic wire
depends on *
It's length
It's shape
It's thickness
Nature of material
Answer:
nature of the material
hope this help you
