Answer:
Fscos63
Explanation:
Given that a horizontal pole is attached to the side of a building. There is a pivot P at the wall and a chain is connected from the end of the pole to a point higher up the wall. There is a tension force F in the chain. What is the moment of the force F about the pivot P?
Taking the moment from the pivot point P, that means the moment at point p = 0
Then, if we consider the weight mg of the pole, according to the principle of equilibrium : sum of the upward forces equal to the sum of the downward forces.
Therefore, mg = Fsinø ....... (1)
Also, taking moment at point P
Let the length of the pole = s
The length of the weight of the pole = 1/2 S
Fscosø = mgs/2
The distance s will cancel out
2Fcosø = mg ...... (3)
Substitute mg in equation 1 into equation 3
2fcosø = fsinø
F will cancel out
Tanø = 2
Ø = tan^-1(2)
Ø = 63.4 degree
The moment of force F about pivot point P will be
Moment = force × distance
Moment = Fcos63 × S
Moment = Fscos63
What distance is required for a train
to stop if its intial Velocity is 23 m/s
and its deceleration is 0.25m/s (Assume the train decelerates at a constant rate.)
Explanation:
what is time in this question
Find the work done by a man who is pulling a box of 45kg of mass by means of rope which makes angle of 45 degrees.
Answer:
0
Explanation:
Since no distance is given, the force is not doing any work
No work is done by the man since we do not know the distance or displacement.
Work is only said to be done when the force applied on an object moves it through a particular distance.
Work done = Force x distance.
Since no distance is given in this problem, we can as well assume that the force applied is doing no work on the object.
Select ALL of the places you might find DNA evidence.
saliva on gum
blood spatter on the wall
inside a femur bone found in the woods
cells on root of hair found at the scene
Answer:
Inside a femur bone found in the woods,
saliva of gum
Please help ASAP please ASAP
Puck 1 is moving 10 m/s to the left and puck 2 is moving 8 m/s to the right. They have the same mass, m.
a. What is the total momentum of the system before the collision? (Answer in terms of the mass, m.) (0.5 points)
b. What is the total momentum of the system after the collision? (Answer in terms of the mass, m.) (0.5 points)
c. Write puck 1's velocity after the collision in component form. (1 point)
d. What is the y-component of puck 2's velocity after the collision? (1 point)
e. What is the x-component of puck 2's velocity after the collision? (1 point)
f. At what angle does puck 2 move after the collision? Determine the angle and draw it on the diagram. (1 point)
g. What is the magnitude of puck 2's velocity after the collision? (1 point)
Answer:
(a) the total momentum of the system before the collision = -2m kg.m/s.
(b) the total momentum of the system after the collision = -2m kg.m/s.
(c) puck 1's velocity after the collision in component form = (5.44 i, 2.54 j)
Explanation:
Given;
mass of Puck 1 , = m
mass of Puck 2, = m (since they have the same mass m)
initial velocity of Puck 1, u₁ = 10 m/s to the left
initial velocity of Puck 2, u₂ = 8 m/s to the right
Let the rightward direction be positive direction
Let the leftward direction be negative direction
(a) the total momentum of the system before the collision;
P₁ = (initial momentum of Pluck 1) + (initial momentum of Pluck 2)
P₁ = (-mu₁) + mu₂
P₁ = mu₂ - mu₁
P₁ = m(u₂ - u₁)
P₁ = m(8 - 10)
P₁ = -2m kg.m/s
(b) the total momentum of the system after the collision;
Based on the principle of conservation of linear momentum, the total momentum before collision is equal to the total momentum after collision.
Thus, the total momentum of the system after the collision is -2m kg.m/s.
(c) puck 1's velocity after the collision in component form
[tex]v = (v_x, v_y)\\\\v = (vcos \theta , vsin \theta)\\\\v = (6cos 25^0 , 6sin25^0)\\\\v = (5.44i, 2.54j)m/s[/tex]
how to make measurements of length, volume and time?
Answer:
The volume of a regular object can be calculated by multiplying its length by its width by its height. Since each of those is a linear measurement, we say that units of volume are derived from units of length.
Explanation:
Answer:
length×Width×Height
Explanation:
Length×Width×Height is the formula for volume
IS IT B!! if not pls helpp!
Answer:
I believe you are correct but we just started this unit
Explanation:
velocity of sound in solid is more than that in liquid.why?
Velocity of sound travels faster in solids than in liquids, and faster in liquids than in gases because "the density of solids is higher than that of liquids, meaning that the particles are closer together."
Answer:
Explanation:
Due to the fact that sound is caused by vibrations, it's more noticeable in liquid because the vibrations may cause ripples in the liquid
A box weighs 1300 N. When a horizontal force of 390 N has applied the box accelerates at 1.3 m/s2. What is the magnitude of the frictional force?
Answer:
Ffriction = 217.7[N]
Explanation:
First, we must find the mass of the box, we must remember that the weight is defined as the product of the mass by acceleration.
[tex]w=m*g[/tex]
where:
w = weight [N] (units of Newtons)
m = mass [kg]
g = gravity acceleration = 9.81 [m/s²]
[tex]1300=m*9.81\\m=132.51[kg][/tex]
Now we must use Newton's second law, which tells us that the sum of forces is equal to the product of mass by acceleration.
∑F = m*a
where:
∑F sum of forces
m = mass = 132.51[kg]
a = acceleration = 1.3[m/s²]
We must know that the forces that act are the horizontal force that moves the box and the friction force in the negative direction that acts against the movement.
Now replacing:
[tex]390-f_{friction}=132.51*1.3\\390-172.26=f_{friction}\\f_{friction}=217.7[N][/tex]
aluminum has a density of 270 kg/m3. what volume of aluminum would have a mass of 49.9 kg?
(unit = m^3)
0.184[tex]m^{3}[/tex] is the answer for Acellus students!
An astronaut sitting on the launch pad on Earth's surface is 6,400 kilometers from Earth's center and weighs 400 newtons. Calculate her weight when she reaches an altitude of 6,400 kilometers above the surface of Earth.
Answer:
weight at height = 100 N .
Explanation:
The problem relates to variation of weight due to change in height .
Let g₀ and g₁ be acceleration due to gravity , m is mass of the object .
At the surface :
Applying Newton's law of gravitation
mg₀ = G Mm / R²
At height h from centre
mg₁ = G Mm /h²
Given mg₀ = 400 N
400 = G Mm / R²
400 = G Mm / (6400 x 10³ )²
G Mm = 400 x (6400 x 10³ )²
At height h from centre
mg₁ = 400 x (6400 x 10³ )²/ ( 2 x 6400 x 10³)²
= 400 / 4
= 100 N .
weight at height = 100 N
A 2-kg ball traveling eastward at 5 m/s hits a 5-kg ball moving at 1 m/s eastward. The 2-kg ball bounces west at 3.0 m/s. What is the speed of the 5kg ball?
Answer:
1.8 m/s
Explanation:
Step one:
given data
m1= 2kg
u1= 5m/s
m2= 5kg
u2= 1m/s
v1= 3m/s
From
m1u1+m2u2= m1v1+m2v2
substitute
2*5+5*1 = 2*3+5*v2
10+5= 6+5v2
15-6= 5v2
9= 5v2
divide both side by 5
v2= 9/5
v2= 1.8 m/s
can someone please help me it’s 15 points of my major grade..
a.
b.
c.
e.
f.
g.
character limit thing
An electromagnetic wave is composed of electrical and magnetic energy.
Please select the best answer from the choices provided
T
F
Answer:
the answer is T!!
!!!!!!!!
Answer:
true
Explanation:
hope this helps
what volume of alcohol will have the same mass as 4.2m^3 of petrol? (density of alcohol 0.4kg/m^3 and petrol is 0.3kg/m^3)
Answer:
3.15m³
Explanation:
To solve this problem, let us first find the mass of the petrol from the given dimension.
Mass = density x volume
Volume of petrol = 4.2m³
Density of petrol = 0.3kgm⁻³
Mass of petrol = 4.2 x 0.3 = 1.26kg
So;
We can now find the volume of the alcohol
Volume of alcohol = [tex]\frac{mass}{density}[/tex]
Mass of alcohol = 1.26kg
Density of alcohol = 0.4kgm⁻³
Volume of alcohol = [tex]\frac{1.26}{0.4}[/tex] = 3.15m³
What is the same about a particle as gas, liquid, or solid?
A. The speed at which the particles move.
B. The volume that the substance takes up.
C. The chemical composition.
D. The temperature of the substance.
The thing same about a particle as gas, liquid, or solid is its chemical composition.
What are states of matter?
Matter exists in three different states: solid, liquid, and gas. By examining the configuration of their particles, it is possible to understand why they have various qualities. Theoretically, at this temperature, particles move slowly and have the least amount of energy.
Phase refers to the material's actual state. To pay attention to is the word physical. Only physical means can change the state of matter. You can make a physical change if energy is added (by raising the temperature) or subtracted (by freezing things).
The chemical composition of matter same about a particle as gas, liquid or solid.
To learn more about states of matter refer to the link:
brainly.com/question/9402776
#SPJ5
Which of these pairs of atoms are isotpoes? (Physical Science) Pair A Pair B Pair C # protons 6 8 5 2 12 12 # neutrons 8 8 5 3 13 14
Answer:
I guess that the atoms are:
Protons: 6 8 5 2 12 12
Neutrons: 8 8 5 3 13 14
Now, two atoms are isotopes if they share the same number of protons (so both atoms are the same element) but they have a different number of neutrons.
From the given options, the only two that have the same number of protons but a different number of neutrons are:
Protons 12, neutrons 13
and
Protons 12, neutrons 14.
These two are isiotopes.
Hi!! Does anyone know this answer? :D
Answer:
Im not fully corrrect but I would say C
Explanation:
Janet jumps off a high diving platform with
a horizontal velocity of 2.6 m/s and lands in
the water 1.5 s later.
How far from the base of the platform
does she land? The acceleration of gravity
is 9.8 m/s?
Answer in units of m.
Answer:
11.025m
Explanation:
In this question there is no vertical velocity,
t= 1.5s
Height of platform=h
From Newton equation
s = ut + 1/2gt^2
But there is no vertical velocity,
Hence,
Then u=0
h = 0 + 1/2 x 9.8 x (1.5)^2
h = 11.025m
If Jerome is swinging on a rope and transferring energy from gravitational potential energy to kinetic energy, what is being done? compression work radiation energy creation
Answer: work
Explanation:
When Jerome swings on a rope and hence this leads to the transfer of energy from the gravitational potential energy to a kinetic energy, this implies that work is being done.
For work to be done, it simply means that one has to transfer energy from one particular form to another form. In this case, the energy was transferred from the gravitational potential energy to a kinetic energy.
Answer:
work
Explanation:
Henry designs an experiment to find out why plants without flowers tend to be wind-pollinated and not animal-pollinated. He takes samples from a variety of plants and studies them in the field. He finds that the evidence supports his hypothesis. Which of these was the hypothesis Henry was testing? Choose the correct answer. Nonflowering plants make less pollen than flowering plants. Nonflowering plants lack the structures to attract animal pollinators. Nonflowering plants grow close to the ground and capture fewer pollinators. Nonflowering plants grow close to the ground because they have no pollen grains.
Answer:
option 2
Explanation:
you are very welcom
I NEED ANSWER ASAP!!!
At which point(s) will acceleration occur shown in the image???
Answer:
Gravity is an ever present force, and therefore acceleration is guaranteed to happen at every single one of those points (and in fact, everywhere in the universe).
On top of that, friction will be present in all four spots (friction with the rails, with the air, with the axles, etc.), and friction is a perfectly acceptable force that will cause acceleration, slowing the roller coaster down.
So the correct answer is every single point, regardless of what answer the teacher expects.
The object will be moving faster if the acceleration and velocity are pointing in the same direction. The object will also slow down if the acceleration is pointing in the opposite direction as the velocity.
What role of acceleration in the motion of object?When an object's speed, direction of motion, or both change, it accelerates. Even while it may appear to be virtually immediate in some circumstances, such as when a golf ball is struck by a club or during car collisions, changes in an object's speed are always continuous.
Since gravity is a constant force, acceleration will unavoidably occur at each of those locations and throughout the whole universe.
Therefore, In addition, there will be friction at all four locations—friction with the axles, the air, the rails, etc.—and friction is a completely normal force that will accelerate the roller coaster, slowing it down.
Learn more about acceleration here:
https://brainly.com/question/14814063
#SPJ2
An object is subject to a 84 Nm torque about a point when a
21 N of force is applied to a second point along the object's
length. How far apart are the two points
Answer:
d = 4[m]
Explanation:
Torque in physics is defined as the product of force by distance. This way you can use the following equation to calculate the torque.
[tex]T=F*d[/tex]
where:
T = torque [N*m]
F = force [N]
d = distance [m]
Now replacing in the equation above.
[tex]84=21*d\\\\d= 4[m][/tex]
When fireworks explode, sound and light are produced. These are examples of(1 point)
macroscopic inputs.
macroscopic outputs.
microscopic inputs.
microscopic outputs.
Answer: macroscopic outputs
Explanation:
When fireworks explode, sound and light are produced. These are examples of macroscopic outputs. Because, explosion from fireworks is an exothermic process which releases massive heat energy to the surroundings.
What is exothermic reaction?Exothermic reaction are those which evolve heat energy to the surroundings. The change in enthalpy of the reaction is negative here. Whereas, in an endothermic reaction energy is absorbed by the reactants.
Exothermic reactions sometimes results in massive explosion. The heat energy released to the surroundings from the fire works is macroscopic level.
The small scale process or quantity that cannot be measured using normal scales are called microscopic units. Therefore, the sound, light, and heat from the explosion all are macroscopic outputs.
Find more on exothermic reactions:
https://brainly.com/question/29206227
#SPJ6
Please help me this is worth allot
whats the result of rounding 52.8015 into five significant figures
Answer:
52.802
Explanation:
"Significant figures" in Mathematics refer to the digits that give accuracy to the value of a measurement. There are specific rules when it comes to determining the significant figures. For example, all non-zero digits are considered significant and zeroes located in-between non-zero numbers are significant. In the number given above, the digit "0" is located between "8" and "1," therefore, it is significant. All the digits above are significant.
The problem is only asking for "five" significant figures. We can do this by counting from the left to the right. By this means, we know that the number will be rounded off to the nearest thousandths, which is "1." The number after 1 is 5, which means that 1 digit will be added to number 1, thus, making the digit into "2." The last digit (5) will then be removed.
Explanation:
five significant of 52.8015=52.801 ..
A 4.00 kg block is pushed along the ceiling with a constant applied force of 85.0 N that acts at an angle of 55.0 degrees with the horizontal. The block accelerates to the right at 6.00 m/s2. Determine the coefficient of kinetic friction between block and ceiling.
Answer:
0.35
Explanation:
According to Newton's second law;
\sum Fx = ma
Fm - Ff =ma
Fm is the moving force = Wsin theta
Fm = 4(9.8)sin55
Fm = 32.1N
Ff is the frictional force = nmgcos theta
Ff = n(4)(9.8)cos55
Ff = 22.48n
Acceleration a = 6.0m/s²
Substitute the given values into the formula and get the coefficient of friction
32.11-23.48n = 4(6)
32.11-24= 23.48n
8.11 = 23.48
n = 8.11/23.48
n = 0.35
Hence the coefficient of friction is 0.35
The middle one please it’s due in 40 min
Answer:
3240000000 Joules
Explanation:
An object moving at a constant velocity accelerates at a constant rate of 2.5 m/s2 for a distance of 30 m. At the end of the acceleration the object has a velocity of 90 m/s. What was its velocity before accelerating?
Answer:
The initial velocity is 89.16m/s
Attached is the solution
Explanation:
A ‘can-chiller’ is used to make a can of drink colder. The initial temperature of the liquid in the can was 25.0 °C. The can-chiller decreased the temperature of the liquid to 20.0 °C. The amount of energy transferred from the liquid was 6930 J. The mass of liquid in the can was 0.330 kg.
Calculate the specific heat capacity of the liquid. Give the unit.
Please help :)
Answer:
4200 J/°C/kg
Explanation:
The formula for heat transfer is given by :
Q= m*c*ΔT where;
Q= heat transferred = 6930 J
m=mass of the liquid = 0.330 kg
c= specific heat capacity=?
ΔT = 25-20 = 5.0°C
Applying the values in the formula as;
Q= m*c*ΔT
6930 = 0.330 * c * 5
6930 = 1.65 c
6930/1.65 = c
4200 = c
c= 4200 J/°C/kg
