A thesis statement is a one-sentence version of your thesis usually found in the introduction. Therefore, option (4) is correct.
What is a thesis statement?A thesis statement commonly appears at the conclusion of the introduction paragraph of a paper or the thesis. It provides a concise summary of the main point of the essay, thesis, research paper, etc. It is generally expressed in one sentence, and the statement can be reiterated elsewhere. The thesis statement consists of the topic and the controlling idea.
The thesis statement can be developed, supported, and explained in the course of the thesis by means of evidence and examples. Thesis statements can help develop and organize the body of the writing piece.
So that readers know what the writer's statement is and aim to prove it. A thesis statement may not necessarily forecast the organization of a thesis, which can be more complex than the purpose.
Learn more about thesis statement, here:
https://brainly.com/question/11546083
#SPJ1
A 10.00kg ball moving at 1,7m/s collides with a 5.00kg ball at rest. If the velocity of the heavier ball is 3,4m/s after the collision, how much velocity will the lighter ball have?(after the collision)
The velocity of Ball B be after the collision is 3.4m/s.
Please explain the law of conservation of momentum and provide two examples.For a collision between two bodies, in accordance with the law of conservation of momentum. Total kinetic energy prior to impact equals total kinetic energy following impact. m1u1+m2u2=m1v1+m2v2. For instance, a gun will recoil after firing a shot. A certain amount of force is applied when the shot is fired and leaves the barrel.
Using the law of conservation of momentum;
mAuA+ mBuB = mAvA+mBvB
Substitute the given values
10(1.7) + 5(0) = 10(3.4) +5vB
17 + 0 = 34 +5vB
17-34 = 5vB
-17 = 5vB
vB = -3.4
vB =3.4m/s
Hence the velocity of Ball B be after the collision is 3.4m/s.
To know more about law of conservation of momentum visit:
https://brainly.com/question/22047595
#SPJ1
An element with 19 protons and 19 electrons gains one electron and results in what species?.
Potassium atoms have one valence electron in the outer shell, 19 protons, and 19 electrons. According to the periodic chart, sodium, the alkali metal above potassium, is thought to be chemically similar to potassium.
Which of the following best describes an atom made up of 21 neutrons, 19 protons, and 19 electrons?Potassium's atomic structure. 19 protons and 21 neutrons make up the nucleus. 19 electrons surround the nucleus, with one extremely unstable electron in the outer shell (ring). The stability of an element's outer electrons governs both its chemical and physical properties.
Which element's atoms' nuclei contain 19 protons?Potassium's most prevalent isotope has a total of 20 neutrons. The stable potassium isotopes.
To know more about electron visit:-
https://brainly.com/question/1255220
#SPJ4
why would it be advantageous to use super conductor in MRI machine?
Advantages of superconducting MRI systems include better performance, the highest temporal and spatial homogeneity of the magnetic field, high signal-to-noise ratio (SNR), the shortest scan time, and the highest patient throughput.
What is MRI?
Radiologists employ magnetic resonance imaging (MRI) as a medical imaging technology to create images of the body's anatomy and physiological functions.
Strong magnetic fields, magnetic field gradients, and radio waves are used in MRI scanners to provide images of the body's organs.
MRI differs from CT and PET scans in that it does not utilize X-rays or ionizing radiation. Nuclear magnetic resonance (NMR) has several medical applications, including MRI.
NMR can also be used for imaging in other NMR applications, like NMR spectroscopy.
In hospitals and clinics, MRI is frequently used for disease staging, diagnosis, and follow-up.
To know more about MRI, click the link given below:
https://brainly.com/question/23599092
#SPJ9
three balls are in water. ball 1 floats, with half of it exposed above the water level. ball 2, with a density less than the density of water is held below the surface by a cord anchored to the bottom of the container, so that it is fully submerged. ball 3, of same radius as ball 2, but of greater mass, is suspended from a rope so that it is fully submerged.
The correct statement about the ball 1 is the magnitude of buoyancy force is equal to that of ball's weight.
The upward force exerted on an object that is wholly or partially immersed in a fluid is called upthrust.
Ball 1 is floating on water.
Weight of the ball 1 is Fg = m₁g is acting vertically downward.
Force of buoyancy Fb = ρvg is acting vertically upwards
Net force acting on the ball is zero, Fg = Fb
As the ball 1 floats without sinking, it is in equilibrium.
This means that the net downward force is balanced by the net upward force.
To know more about the buoyancy:
https://brainly.com/question/16172991
#SPJ4
PRELAB: A MODEL FOR CIRCUITS III: CAPACITORS AND RC CIRCUITS
1. Predict the change in capacitance of a parallel plate capacitor as the area of the plates is increased.
2. Predict the change in capacitance of a parallel plate capacitor as the separation between the plates is increased.
3. Briefly describe the observations you will make in Activity 1-2 of the lab to test one of these two predictions.
4. If you have two identical capacitors, what do you predict will be the capacitance of the two connected in parallel?
5. Briefly describe the observations you will make in Activity 2-1 of the lab to test this prediction.
6. What devices will you use to measure the decay of voltage in an RC circuit?
A parallel plate capacitor has a capacitance of C=fracepsilon_0 Ad, where A is the area of the plates and d is the distance between them. 1) If the area of the plates A_1 grows, then A_1>A C_1=fracepsilon_0 A_1d>fracepsilon_0 Ad C_1>C, which means that the capacitance also grows.
2) If the distance between the plates is increased by d_1, the capacitance decreases because d_1>d C_1=fracepsilon_0 Ad_1 fracepsilon_0 Ad C_1C.
3) Since capacitance is directly proportional to plate area, capacitance also increases with plate area.
Because capacitance is inversely proportional to plate separation, capacitance decreases as plate separation increases.
4) When two identical capacitors are connected in parallel, their equivalent capacitance is C_1 C_1=C+C=2C. 6) The Voltmeter is the device used to measure the voltage decay in an RC circuit.
To learn more about plate capacitor here
https://brainly.com/question/17176550
#SPJ1
you have three light bulbs; bulb a has a resistance of 240 q, bulb b has a resistance of 192 q, and bulb c has a resistance of 144 q. each of these bulbs is used for the same amount of time in a setup like that in the drawing. in each case the speed of the rod and the magnetic field strength are the same. rank the setups in descending order, according to how much work the hand in the drawing must do (largest amount of work first).
The correct sequence will be: A, B, C
Given,
Resistance A = 240 Ω
Resistance B = 192 Ω
Resistance C = 144 Ω
We know that the resistance has relations with Current (I) and Voltage (v)
But to find the work done by the hand,
We will apply the formula of the work,
W = VIt
Replacing V with R/I
Work = (R/I)*I*t
Work= R*t
The time given is same.
So here,
Work = Resistance,
By this derivation, the highest resistance will do the highest amount of work.
Therefore, the work done by Resistance A will be the most and then the work by resistance B and then the work by resistance C.
To know more about work, refer:
#SPJ4
PLS HELP I ONLY HAVE 2 MINUTES PLEASE ONLY ANSWER IF YOU KNOW THE RIGHT ANSWER
_____ are the main form of fuel that is burned today in automobiles, industrial plants, and homes.
Carbon Monoxides
Nitrogen Oxides
Sulfur Oxides
Hydrocarbons
Answer:
Hydrocarbons
Explanation:
quizlet
what characteristics must earth's core have to generate a magnetic field?
Other molten metals such as iron. A magnetic field is produced when electrical charges pass through the Earth as a result of the Earth's spin, which also causes the core to spin.
What is magnetic field ?
It usually represents the region around the magnet where its force can be felt. We use the magnetic field as a tool to describe how the magnetic force is distributed in the space around and within something magnetic in nature.
A planet must fulfil three conditions in order to produce a magnetic field: 1) a molten, electrically conducting interior; 2) convection in the interior; and 3) a moderately rapid rotation. This sets up a process that is somewhat similar to a naturally occurring electrical generator, where the convective kinetic energy is converted to electrical and magnetic energy. Of the four terrestrial planets, Earth has the strongest magnetic field.
To learn more about magnetic field click here:
https://brainly.com/question/11514007
#SPJ4
the unit of work is the _______.
The unit of work is the Joules.
What is work?Work is a measure of energy expended in moving an object; most commonly, force times distance. It is said that no work is done if the object does not move.
Joules is the International System of Units (S.I unit) and the derived unit of energy, work and heat. It represents the work required to exert a force of one newton for a distance of one metre. Joules has a symbol J.
Joules is a unit named in honour of the English physicist James Prescott Joule and it equals 10⁷ ergs, or approximately 0.7377 foot-pounds.
Based on the above, it can be said that joules (J) is the unit of work.
Learn more about work at: https://brainly.com/question/9150655
#SPJ1
FILL IN THE BLANK. power supplies all provide the same voltages to a system, such as 3.3v, 5v, and 12v. each of these can be referred to as a___, because each one comes from a specific tap within the power supply.
Linear regulated because each one comes from a specific tap within the power supply.
What are the four power supply stages?The four main processes shown in a block diagram of a regulated DC power supply are step down transformation, rectification, DC filtration, and regulation. Unregulated power supply and regulated power supply are the two categories that define DC power supply designs. The controlled power supply can be switched or linearly regulated.
What three types of power supplies are there?Battery-based, switched, or linear? Regulated power sources can be divided into three categories: battery-based, switching, and linear. Although switching and battery power have advantages, linear is the least complex of the three fundamental regulated power supply systems.
Learn more about Linear regulated here:
https://brainly.com/question/17828883
#SPJ4
astronomers can now report that active star formation was going on at a time when the universe was only 20% as old as it is today. when astronomers make such a statement, how can they know what was happening inside galaxies way back then? a.they look at a graph that shows the way galaxy redshifts change with time b.they examine the spectra of galaxies (or the overall colors of galaxies) with the highest redshifts they can find c.they look at radio waves coming from nearby active galaxies d.they look at the elements in comets, which formed when our solar system was first forming e.they look at the open clusters in the milky way galaxy
Astronomers can now report that active star formation was going on at a time when the universe was only 20% as old as it is today. when astronomers make such a statement, they examine the spectra of galaxies (or the overall colors of galaxies) with the highest redshifts they can find.
SO option B is correct.
Who are Astronomers?An astronomer is described as a scientist in the field of astronomy who focuses their studies on a specific question or field outside the scope of Earth by observing astronomical objects such as stars, planets, moons, comets and galaxies – in either observational or theoretical astronomy.
Astronomers are known to use redshifts to measure how the universe is expanding, and thus to determine the distance to our universe's most distant and therefore oldest objects.
Learn more about astronomers at; https://brainly.com/question/1003405
#SPJ1
a wiggle in time is a
Answer:
A wiggle in time is called vibration. A wiggle in space and time is called wave. A wave is disturbance over the space. Distinguish between the propagation of sound waves and the propagation of light waves. Sound waves are mechanical waves.
Although Arturo has looked at his watch thousands of times, he is unable to recall whether the watch features Arabic or Roman numerals. This is most likely due to a failure in a. implicit memory. b. iconic memory. c. encoding. d. storage. e. retrieval.
The most likely cause of Arturo problem is due to a failure of encoding.
option C is the correct answer.
What failure of encoding memory?Encoding Failure refers to the brain's occasional failure to create a memory link.
Encoding refers to the brain's ability to store and recall events and information, either short or long-term.
There are several reasons that can cause the failure of the encoding memory and they include the following:
trauma,the use of substances car accidentGenerally, any damage the memory can cause encoding failure.
Thus, if Arturo has looked at his watch thousands of times, and he is unable to recall whether the watch features Arabic or Roman numerals, we conclude that it is encoding failure.
Learn more about encoding failure here: https://brainly.com/question/6551361
#SPJ1
which statement best describes what happens during this process?
The opposite charges are pulled away in solution and become free. Option D
What is solvation?We know that when we add an ionic substance into water that the ionic substances would become dissolved in the water. The meaning of this is that the ions that are in the substance would be drawn apart by the molecules of water. The process that makes the ions to be drawn apart by water is what we call solvation.
Now when there is solvation, we would notice that the positive end of the water dipole would surround the negative ion and the negative part of the water dipole would surround the positive ion.
Here we can see that the chloride ion is surrounded as such as so also is the potassium ion. This would lead to the pulling apart of the ions by the water and they become free in solution.
Learn more about solvation:https://brainly.com/question/14356923
#SPJ1
A 10.00kg ball moving at 1,7m/s collides with a 5.00kg ball at rest. If the velocity of the heavier ball is 3,4m/s after the collision, how much velocity will the lighter ball have?(after the collision)
The velocity of Ball 2 after the collision is 3.4m/s.
What is law of conservation of momentum?When two bodies collide, according to the law of conservation of momentum. The total kinetic energy before and after collision will be the same.
Using the law of conservation of momentum;
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Given, m₁ = 10.00kg
u₁ = 1.7m/s
m₂ = 5.00kg
u₂ = 0m/s
v₁ = 3.4m/s
Substitute the given values
10(1.7) + 5(0) = 10(3.4) + 5v₂
17 + 0 = 34 + 5v₂
17-34 = 5v₂
-17 = 5v₂
v₂ = -3.4
v₂ = 3.4 m/s
To know more about law of conservation of momentum visit:
https://brainly.com/question/17140635
#SPJ1
Two students hold an open bed sheet loosely by its corners to form a “catching net.” The instructor asks a third student to throw an egg into the middle of the sheet as hard as possible. Why doesn’t the egg’s shell break?
The average force applied on the egg is small because of the large time interval in which the egg is in contact with the bed sheet. This is because force is inversely proportional to time.
What is the relation between force and time?
Force is a measure of the change of momentum over time. It can be written as Force = mass x acceleration (change in velocity/ time). The momentum of an object increases when an external force is acting upon the object, because that force is causing it to accelerate, and to have an increase in the velocity of the object.
The force acting upon an object is inversely proportional to time, with the increase in time, the applied force decreases. However, for constant acceleration, this quantity does not change. The average force on the egg is small because of the large time interval in which the egg is in contact with the bed sheet.
Learn more about Force here:
https://brainly.com/question/13191643
#SPJ1
A body falls freely from rest on Earth [tex](g=-10 \mathrm{~m} / \mathrm{s}[/tex] )
1. The displacement at [tex]t=3 \mathrm{~s}[/tex] is
The displacement of the body falling freely from rest after t = 3 s is 45 m.
What is displacement?The displacement is simply the difference in the position of the two marks and is independent of the path taken when traveling between the two marks.
To calculate the displacement of the body, we use the formula below.
Formula:
s = ut+gt²/2Where:
s = Displacement of the objectt = Timeg = Acceleration due to gravityu = Initial velocityFrom the question,
Given:
u = 0 m/st = 3 sg = 10 m/s²Substitute these values into equation 1
s = (0×t)+(10×3²)/2s = 45 mHence, the displacement of the body is 45 m.
Learn more about displacement here: https://brainly.com/question/28370322
#SPJ1
Consider a field of insects, all of which have essentially the same mass.
a. If the total momentum of the insects is zero, what does this imply about their motion?
b. If the total kinetic energy of the insects is zero, what does this imply about their motion?
If the total momentum of the insects is zero, this means all of the insects are at rest or are moving in opposite of each other. Same if the total kinetic energy is zero.
What is momentum?Momentum is the quantity of motion which is multiplied by the amount of matter moved i.e., mass and the velocity at which it moves. Because, the object is in motion, it is a vector quantity, it has both direction and magnitude. It is determined by the product of the object's mass and the velocity of object.
If the total momentum of the insects is zero, this could mean anything of the two things. Either, all of the insects are at rest or an equal amount of insects are moving in opposite direction of each other which cancels out the total momentum of the insects.
If the total kinetic energy of the insects is zero, this means either all of the insects are at rest or an equal amount of insects are moving in opposite direction of one another which results into canceling out the energy.
Learn more about Motion here:
https://brainly.com/question/3421105
#SPJ1
What can I do to make this less expensive, with less cargo damage, and with a sturdy shell condition? Anything less than the amount shown in the image.
The external part of the shell is made of fiberglass. This is probably very expensive. The production team of the above product should experiment with Graphene.
Why should Graphene be considered for the above project?It should be highlighted that graphene is already being utilized in transportation, medical, electronics, energy, defense, and desalination; graphene research is having a significant influence across a wide variety of sectors.
To put things in perspective, one square meter of normal paper is 1000 times heavier than graphene, while a single sheet of graphene large enough to cover a football field weighs less than a gram. Strongest. With a tensile strength of 150,000,000 psi, graphene outperforms steel and Kevlar.
Graphene, a single sheet of carbon atoms, has been hailed as the strongest substance known to man, 200 times stronger than steel, lighter than paper, and with amazing mechanical and electrical capabilities.
Given that graphene is formed of carbon, and carbon is in plentiful supply, it will very certainly be less expensive than fiberglass.
Learn more about Graphene:
https://brainly.com/question/29335420
#SPJ1
an earth satellite of mass 500.0-kg is in a circular orbit at an altitude of 300 km above the earth's surface. the earth radius is 6380km, and the earth mass is 5.98 1024kg.
The speed of the satellite of mass 500.0-kg is in a circular orbit at an altitude of 300 km above the earth's surface is 7726.58 m / s
Fc = m v² / r
Fg = G M m / r²
Fc = Centripetal force
m = Mass
v = Tangential Velocity
r = Distance
Fg = Gravitational force
G = Gravitational constant
M, m = Masses
The rotational motion of the satellite is due to the gravitational force of Earth.
Fc = Fg
m v² / r = G M m / r²
v² = G M / r
v² = 6.67 * 10⁻¹¹ * 5.98 * 10²⁴ / ( 6380000 + 300000 )
v² = 39.89 * 10¹³ / 6680000
v² = 59.7 * 10⁶
v = 7726.58 m / s
Therefore, the speed of the satellite is 7726.58 m / s
To know more about orbital speed
https://brainly.com/question/541239
#SPJ4
BioFlix Activity: Gas Exchange -- Oxygen Transport Drag each label to the appropriate location on the flowchart. 4 of 10 Reset Help Oxygen is carried through blood Oxygen diffuses from the alveoliinta Oxygen ditluses from the blood to the body's tissues Oxygen ones a red blood cell Oxygen binds to molecule of hemoglobin capilary
Oxygen Transport Drag each label to the appropriate location on the flowchart is attached.
What is gas Exchange?The biological process of gases being moved across cell membranes to either leave or enter the blood is known as gas exchange. Cells continuously require oxygen for aerobic cellular respiration, which also continuously emits carbon dioxide as a waste product.
Throughout the body, gas exchange occurs between the blood and the cells, with oxygen leaving the blood or entering the cells and carbon dioxide entering the blood. Additionally, there is a gas exchange between the blood and the air in the lungs, with carbon dioxide leaving the blood and entering the air to be expelled from the lungs, and oxygen entering the blood from the inhaled air inside the lungs.
Learn more about gas exchange here:
https://brainly.com/question/28760383
#SPJ1
Problem 12.41 9 of 9 Review A 50 g mass rotates in a vertical plane--call it the xy-plane with the y-axis pointing up--at the end of a 75-cm-long, massless, rigid rod. The other end of the rod is attached to a frictionless pivot at the origin. Part A What is the gravitational torque about the pivot when the mass is 60° above the +x-axis? Give your answer using unit vectors. Express your answer in newton-meters. Enter components of torque, separated by comma. IVO AE ? Tx, Ty,Tz = N·m Submit Request Answer
The value of gravitational torque after solving the expression will be equal to -0.18375 N.mz.
What is Torque?The rotating equivalent of a force in physics or mechanics is called torque. Depending on the topic matter, it may also be referred to as the moment, point in time of force, rotating force, or turning effect. It symbolizes a force's capacity to cause a change inside the bodies natural rotational motion.
As per the given information in the question,
Mass, m = 50 g
Length, l = 75 cm
Gravitational force, [tex]\vec F[/tex] = -mgy
Then, the position vector of the particle will be,
[tex]\vec \tau[/tex] = l(cos 60° x + sin 60° y) × (-mgz)
= -0.18375 N.mz
Therefore,
[tex]\tau_x, \tau_y,\tau_z=0, 0, -0.18375[/tex]
To know more about Torque:
https://brainly.com/question/6855614
#SPJ1
TRUE/FALSE. initial discovery of radioactivity and how it was thought to be the same as another type of light energy emission
Initial discovery of radioactivity and how it was thought to be the same as another type of light energy emission is true statement.
Henri Becquerel made the initial discovery of radioactivity. She investigated the characteristics of x-rays, which Wilhelm Roentgen had discovered in 1895, using naturally fluorescent minerals. In the belief that the uranium would absorb the sun's energy and then release it as x-rays, he placed potassium uranyl sulphate on photographic plates covered in black paper and exposed them to the sun.A study released earlier this month by the Global Carbon Project (GCP), a team of scientists who monitor emissions, predicts that CO2 emissions will increase by 4 point 9 percent in 2021 compared to the previous year.
Due to the COVID-19 pandemic and related lockdowns, emissions decreased by 5 point 4 percent in 2020.
With a 40% share and increasing, the energy sector remains the main source of greenhouse gas emissions.
To know about fluorescent minerals-
https://brainly.com/question/12697510
#SPJ4
Two carts on an air track have the same mass and speed and are traveling toward each other. If they collide and stick together, find the total momentum and total kinetic energy of the HINT (a) the total momentum O The final momentum is zero. The final momentum is half the initial momentum. O The final momentum is twice the initial momentum. O There is not enough information to tell. (b) the total kinetic energy O The final kinetic energy is zero. OO The final kinetic energy is half the initial kinetic energy. The final kinetic energy is twice the initial kinetic energy. O There is not enough information to tell. (c) Describe a different colliding system with this same final momentum and kinetic energy.
if they collide and remain united then the. Total momentum of the system is zero.
Total momentum by using the Principle of Momentum Conservation.
mVa-mVa=2Vb
final speed and total momentum of system =zero
p=0
Due to the inellastic impact and the same masses and speeds, the system's total kinetic energy is reduced to zero. Before and after a collision, the total kinetic energy are, respectively:
Ka=mv^2
Kb=0
Momentum is the result of a particle's mass and velocity. A vector quantity with both magnitude and direction is momentum. Isaac Newton's second equation of motion states that the force applied to a particle is equivalent to the time rate of change of momentum.
Any grouping of particles has a momentum equal to the vector sum of their momenta. A modification in one particle's momentum is perfectly balanced by a modification in the momentum of another particle, according to Newton's third law, which states that particles exert equal and opposite forces on one another.
To know more about momentum visit : brainly.com/question/24030570
#SPJ4
suppose that a lone asteroid happens to be passing jupiter on an unbound orbit (well above jupiter's atmosphere and far from all of jupiter's moons.) which of the following statements would be true?
The asteroid would continue on its original, unbound orbit when it left Jupiter, with no alteration to its orbital path.
Does 2022 see the arrival of an asteroid?The greatest planet-killing-sized asteroid in eight years has been found, according to astronomers, and it will cross Earth's orbit. Researchers seeking for space pebbles in the orbits of Earth and Venus discovered the asteroid 2022 AP7, which they called.
An asteroid could be stopped.One method we might be able to change an asteroid's trajectory is through kinetic impactors. In order to use this method, an asteroid must be smacked in order to alter its orbit such that it is no longer a hazard to Earth.
To know more about Asteroid visit:
https://brainly.com/question/19161842
#SPJ4
Which type of mass movement do you think is the least dangerous. Explain your answer!
It is a sluggish, protracted mass movement called creep soil.
What forms of mass movements are there?Creep, Fall, Slip, Flow, Solifluction, Rock Glaciers, Slumping (Earthflow), Mudflow (Lahar), Debris Flow, Debris Slide, Debris Avalanche, Rockslide, Rockfall, and Debris Fall are a few examples of mass movement types.
What kind of mass movement occurs gradually?The very slow, frequently continuous migration of regolith down slope is known as creep. Almost all slopes experience creep, but the rates vary.
Which kind of mass mobilization is the most harmful?A landslide is the most harmful kind of mass movement and happens when rock and dirt suddenly slip down a steep slope.
To know more about creep soil visit:-
https://brainly.com/question/441844
#SPJ4
nail tips exert tremendous pressures when they are hit by hammers because they exert a large force over a small area. what force must be exerted on a nail with a circular tip of 1.00 mm diameter to create a pressure of (this high pressure is possible because the hammer striking the nail is brought to rest in such a short distance.)
2.18X103 N force must be exerted on a nail with a circular tip of 1.00 mm diameter to create a pressure.
diameter, d = 0.95 mm = 0.95x10-3m
P = 3.1X10^9 Pa
r = d/2 = 0.95/2 x 10^-3 m
= 0.475 x 10^-3 m
Area = [tex]\pi[/tex] r2
= 3.14 x ( 0.475 x 10^-3 m)2
= = 3.14 x 0.225 x 10^-6
= 0.706 × 10-6 m2
Force = PXA
= 3.1 x 10^9 x 0.70 6 × 10^-6
F = 2.18X103 N
Pressure , within the physical sciences, the perpendicular force in step with unit per area , or the stress at a factor inside a restricted fluid.
A easy instance of pressure can be seen by retaining a knife to a bit of fruit. In case you keep the flat part of the knife towards the fruit, it might not reduce the area. The force is spread out of a massive vicinity (low strain).
The SI unit of pressure is pascal (represented as Pa) which is identical to one newton in line with rectangular metre (N/m2 or kg m-1s-2).
Learn more about pressure here:- https://brainly.com/question/28012687
#SPJ4
A bullet of mass 7.5 g that is moving at a speed of 483 m/s embeds itself into a tree, penetrating 19.4 cm into the wood.What is the magnitude of the average force, in N, exerted by the tree on the bullet? sig.gif?tid=4T78-AC-85-4A-844D-22357F =
The average force by which the bullet will hit the tree is F = 4.50945 × [tex]10^4[/tex] N .
Given : mass of the bullet = 7.5 gram
u or intial velocity = 483 m/s
v or final velocity = 0 m/s
h or height = 19.4 cm
v² = 2as + u²
0 = 38.8 a + 483 × 483
- 483 × 483/ 38.8 = a
thus acceleration = 6012.6 m/s²
F = ma
Thus on substituting the values we get
F = 7.5 × 6012.6
F = 45,094.5 N
or
F = 4.50945 × [tex]10^4[/tex] N
The magnitude of the average force is F = 4.50945 × [tex]10^4[/tex] N .
To know more about force or acceleration you may visit the link which is mentioned below :
https://brainly.com/question/1046166
#SPJ4
determine the temperature at which the celsius and fahrenheit scales give the same numerical reading (tc
There seems to be one location where the Fahrenheit or Celsius scales meet. At both -40 °C und -40 °F, they are equal.
Why is the Celsius scale so widely used?Because it is used in conjunction with the metric scale, the Fahrenheit scale is more frequently utilized. It makes reasonable that they utilize the Celsius scale as well since the majority of nations use the metric system. It is also simpler to convert from Celsius to Kelvin for this reason.
How is Celsius read?The letters °C or just C can be used to denote temperatures in Celsius as a number of degrees. The temperature difference between boils and ice is 100 degrees Celsius, whereas it is 180 ° Fahrenheit.
To know more about Celsius scale visit:
https://brainly.com/question/562205
#SPJ4
name five (5) keys to a successful strategic partnership (note: there are more than 5, but you only need to identify any 5) (note: you don't have to describe them, only name them)
The (5) keys to a successful strategic partnership are:
-Creating trust
- Have shared vision and objectives
-There should be personal relationships
-Mutual benefits and needs
-Total commitment and top management support
What are the The (5) keys to a successful strategic partnership about?Strategic Partnership is Important for attaining competitive performance that benefits both the buyer and the supplier, as well as a strategic position as opposed to a tactical one
Successful strategic partnerships need both sides to commit over an extended period of time to working together for their mutual advantage, exchanging pertinent information and the risks and rewards of the connection.
Therefore, Partners are more ready to cooperate, find compromise solutions to issues, work toward obtaining long-term advantages for both parties, and go above and above when there is trust between them. It is essential for both spouses to have a common vision and mutually accepted goals.
Learn more about strategic partnership from
https://brainly.com/question/13710961
#SPJ1
