Answer:While walking, one foot is in contact with the ground at a time. The surface area of one foot is less than two feet. Therefore, the pressure is more than the pressure exerted while standing, as the surface area of both feet is more.
a bell rings at a frequency of 75hz on a warm 25 degree evening. calculate the...
a. speed of the sound wave at this temperature.
b. wavelength of the sound wave
Answer:
Explanation:
We need 2 different equations for this problem: first the velocity of sound equation, then the frequency of the sound equation.
The velocity of sound is found in:
v = 331.5 + .606T
We need to find that first in order to fill it into the frequency equation which is
[tex]f=\frac{v}{\lambda}[/tex] where v is the velocity we will find the part a, f is frequency and lambda is the wavelength. Starting with the velocity of the sound:
v = 331.5 + .606(25) and
v = 331.5 + 15 and rounding correctly using the rules for sig fig when adding:
v = 347 m/s
Filling that into the frequency equation:
[tex]75=\frac{347}{\lambda}[/tex] and
[tex]\lambda=\frac{347}{75}[/tex] so
[tex]\lambda=4.6m[/tex]
Bones are composed of three main components, what are they? (Choose all that apply)
Answer:
funny bone and compact bone
Explanation:
your funny bone only reacts if you hit it against something the compact bone is the heaviest and strongest bone in your body and the bone marrow is soft sponge like tissue in the center if most bones that produces white and red blood cells
Waves break on a beach due to:
reducing depth of water near beach
increasing wavelength near beach
turbulence near the shoreline
Answer:
increasing wavelength near beach
Explanation:
When wavelength increases, frequency of these waves decreases and the waves suddenly stop.
This is also called damped oscillation.
goodie morning
—————————
what is nitric acid?
Answer:
Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.
Explanation:
Good morning...
Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.
which material has more specific heat?
Answer:
SO
Explanation:
SI
Answer:
Explanation:
dynamic equilibrium
Which one of the following is an example of a solution?
a. Sand particles in water
b. Orange Squash
c. Vinegar
d. Paint
Answer:
it is maybe A but i'm not 100% sure
Explanation:
its the only one that is mixed
There is a bell at the top of a tower that is 45m high. The bell weighs 190N. The bell has ___________________ energy. Calculate it.
I NEED THE ANSWER PLEASE
Answer:
250mn
Explanation:
what is parking orbit?
Answer:
A temporary orbit in which a spacecraft awaits the next phase of its mission .
A rope horizontally pulls a massive object lying on a surface with friction with a constant
velocity. What describes the force on the rope?
Answer:
Equal to the frictional force
Explanation:
Question; The options given with regards to a similar question posted online are;
A. Equal (equivalent) to the frictional force
B. Larger than the frictional force
C. Equal to the object's weight
D. More than the object's weight
Explanation
According to Newton's first law of motion, every object shall remain at rest or continue moving with uniform (constant speed) motion unless there is a net force acting on the object
Given that the velocity of the massive block, lying on the surface that has friction, being pulled by the rope = Constant
Therefore;
The net force acting on the moving block while being pulled by the rope = 0
From which we have;
The pulling force = The resistive force
Where;
The pulling force = The (pulling) force (applied) on the rope
The resistive force = The frictional force of the surface which tends to prevent the motion of the block
Therefore, given that the net force acting on the block = 0
The force on the rope = The frictional force (of the surface)
The correct option is option A. Equal to the frictional force.
the volume of vessel is 6 litres. convert it into ml
In Rutherford's model of the atom, the positive charge
A) occupies most of the space in the atom
B) is concentrated at the center of the atom
C) is distributed throughout the atom's volume
D) revolves about the nucleus in specific orbits
Answer:
the correct address is B
In Rutherford's model of the atom, the positive charge is concentrated at the center of the atom.
What is Rutherford's model?The model described the atom as a tiny, dense, positively charged core called a nucleus, in which nearly all the mass is concentrated, around which the light, negative constituents, called electrons, circulate at some distance, much like planets revolving around the Sun.
To learn more about Rutherford's model here
https://brainly.com/question/11749615
#SPJ2
a man runs 1200m on a straight line in 4 min . find his velocity.
Answer:
5m/sec^2
Explanation:
Distance=1200m
Time=4 min
1=60sec
4=4 x 60
=240sec
Velocity=Distance/Time
Velocity=1200/240
Velocity=5m/sec^2
Mark me as brainliest
pleaseeeeeee helppppp this is mah last question... thank u (. ^ ᴗ ^. )
Answer:
44.1 m
Explanation:
Consider the displacement being x:
x = (g•t²)/2
x = (9.8•3²)/2
x = (9.8•9)/2
x = 88.2/2
x = 44.1 m
Answer:
44.1 mExplanation:
that's the correct answer
(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg.
Complete question:
(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C
Answer:
The energy that must be supplied to boil the given mass of the water is 672,000 J
Explanation:
Given;
mass of water, m = 2 kg
heat of vaporization of water, L = 330 kJ/kg
initial temperature of water, t = 20 ⁰C
specific heat capacity of water, c = 4200 J/kg⁰C
Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;
Q = mc(100 - 20)
Q = 2 x 4200 x (80)
Q = 672,000 J
Q = 672,000 J
Q = 672,000 J
Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J
How is an ammeter connected in a circuit to measure current flowing through it?
Answer:
It is connected in series with the circuit
Explanation:
This is because to measure the current in the circuit, the current in the circuit has to flow through the ammeter. As such, the ammeter must be connected in series with the circuit so as to measure the current flowing through the circuit.
So, to measure the current flowing through a circuit with an ammeter, the ammeter must be connected in series with the circuit.
The velocity of sound in a medium increases with increasing
a. distance
b. amplitude
c. temperature
d. time
c- temperature
The speed of sound increases with increasing temperature .
If a train traveled 400 miles north and traveled back 275 miles south and the total trip took 5 hours to complete, what was the average velocity of the train in mph?
The average velocity is 25 mph north.
Average velocity = displacement/time
Displacement =
(400 mi north) + (275 mi south)
Displacement = 125 mi north
Average V = (125 mi north) / 5 hours.
Average V = 25 mph north
The metal wire in an incandescent lightbulb glows when the lights is switch on and stops glowing when switched off. This simple process is which kind of a change?
Answer:
When the metal wire in an incandescent lightbulb glows when the light is switched on and stops glowing when it is switched off, this is an example of resistance, which provides light and heat.
Explanation:
Opening or closing a circuit.
help please!!
From the following images shown, classify the interactions that occur and say between which bodies, according to the following criteria:
a) Contact forces
b) Non-contact forces
Answer:
B= 4 A=5
Explanation:
The energy of an electromagnetic wave changes proportionally to which
other property?
O A Speed
O B. Shift
O c. Wavelength
O D. Frequency
Answer:
D. Frequency
Explanation:
The energy of an electromagnetic wave is proportional to frequency, mathematically it is expressed as;
E ∝ f
E = hf
where;
h is Planck's constant = 6.626 x 10⁻³⁴ Js
The equation above can also be expanded to;
[tex]E = hf = h \frac{c}{\lambda}[/tex]
where;
c is speed of light = 3 x 10⁸ m/s
λ is the wavelength of the electromagnetic wave
Since the speed of light is constant, we can conclude that the energy of the electromagnetic wave is directly proportional to its frequency and inversely proportional to its wavelength.
Therefore, the correct option for direct proportionality is FREQUENCY
the use of thermostat in a gas cooker is to
Explanation:
An oven thermostat regulates the temperature inside an oven. The thermostat's temperature-sensitive probe measures the oven's warmth, switching the heat on and off as necessary to maintain the correct temperature.
A man ran a 5 mile race. The race looped around a city park and back
to the starting line. What is the man's total displacement?
A. 0 miles
B. 2.5 miles
C. 5 miles
D. 10 miles
Answer:
How big the city because it could be a big all city
What is the gravitational potential energy of a 3.0-kg rock that is 12.4 m above the ground?
Answer:
Explanation:
PE = mgh where m is mass, g is the pull of gravity, and h is the height to which the object can possibly fall.
PE = 3.0(-9.8)(-12.4) so
PE = 360 J, rounded to the correct number of sig figs.
The gravitational potential energy of the rock is 362.4 joules.
What is gravitational potential energy?The gravitational potential energy of an object is given by the formula:
PE = mgh
where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity (which is approximately 9.81 m/s^2 near the surface of the Earth), and h is the height of the object above a reference point.
In this case, the mass of the rock is 3.0 kg, the height above the ground is 12.4 m, and the acceleration due to gravity is 9.81 m/s^2. Substituting these values into the formula, we get:
PE = (3.0 kg) x (9.81 m/s^2) x (12.4 m) = 362.4 J
Therefore, the gravitational potential energy of the rock is 362.4 joules.
To learn about universal gravitation constant click:
https://brainly.com/question/858421
#SPJ3
Multiplying a vector with another vector results in what type of answer.
A) a direction
B) a vector
C) either a vector or a scalar
D) a scalar
multiplication of two vectors yields a vector oroduy
As Courtney switches on the TV set to watch her favorite cartoon, the electron beam in the TV tube is steered across the screen by the field between two charged plates. If the electron experiences a force of 3.0 * 10^6 N, how large is the field between the deflection plates?
Answer:
Explanation:
Force= (q1q2)/(4/\Ęr2)
3×10^6= (1.602×10^-19)^2/(r^2)
r^2=(2.27×10^-33)/(3×10^6)
r^2=8.55×10^-45
r= 9.25×10^-23
Which wave shows the loudest sound below?
Answer:
I think C
Explanation:
If im right give brainliest :)
how does energy change ? explain with example . how does bulb generate ? write with it's part.
Answer:
According to the law of conservation of energy, energy is neither created nor destroyed but changes from one form to another
The energy in the light bulb comes from the movement of electrons through the resistance of the coil of the bulb, therefore, the energy in the bulb is changed from electric energy to heat and light energy as follows;
The friction between the moving electrons and the resistive filament of the light bulb results in the slowing down of the rapidly moving electrons
The part change in the (kinetic) energy of the electrons moving through the filament of the bulb as they slow down is observed as sensible heat which causes the bulb to be hot
Another part of the change in energy is given seen as the light given off by the bulb filament in an incandescent bulb as the filament becomes very hot from the movement of the electrons which causes the bulb to glow (produce light), due to the incandescent characteristics of the filament
Explanation:
HELP PLEASE ?? can u answer this multiple choice for me please?
Answer:
.04 kg m/s
Explanation:
Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.
Before the collision, the data given for the toy train:
v = 0.5m/s
m = 75g
We need to convert grams into the SI unit of mass, kg.
75g / 1000g * 1kg = 0.075kg
Using p = mv, we can determine:
p = 0.075kg * 0.5m/s = 0.0375 kg m/s
Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.
A 5L container has a
Answer:a gas at pressure of 0.8 m column of H g
Explanation:I think(b) During one day, 250 kg of water is pumped through
the solar panel. The température of this
water rises from 16°C to 38°C.
The water absorbs 25% of the energy incident on the solar panel. The
specific heat capacity
of water is 4200J/(kg °C).
Calculate the energy incident on the solar panel during that day.
Please explain how to find the incident energy
Answer: The energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].
Explanation:
Given: Mass = 250 kg
Initial temperature = [tex]16^{o}C[/tex]
Final temperature = [tex]38^{o}C[/tex]
Specific heat capacity = 4200 [tex]J/kg^{o}C[/tex]
Formula used to calculate the energy is as follows.
[tex]q = m \times C \times (T_{2} - T_{1})[/tex]
where,
q = heat energy
m = mass of substance
C = specific heat capacity
[tex]T_{1}[/tex] = initial temperature
[tex]T_{2}[/tex] = final temperature
Substitute the values into above formula as follows.
[tex]q = 250 kg \times 4200 J/kg^{o}C \times (38 - 16)^{o}C\\= 250 kg \times 4200 J/kg^{o}C \times 22^{o}C[/tex]
As it is given that water absorbs 25% of the energy incident on the solar panel. Hence, energy incident on the solar panel can be calculated as follows.
[tex]\frac{25}{100} \times q = 250 kg \times 4200 J/kg^{o}C \times 22^{o}C\\q = 9.24 \times 10^{7} J[/tex]
Thus, we can conclude that the energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].
