A marketing researcher interviews a large number of respondents and asks them a set of questions that are listed in a questionnaire. The respondents are required to select a response from a given set of options. In this case, the researcher is _____.

Answer:

B. 13.95 meters

Step-by-step explanation:

The question is just asking you to talk the amount of time taken, and divide it in half.

d= 0.5(27.9)

Answer:

1 option is correct nd your answer is also correct

Answer:

The median is 9

Step-by-step explanation:

The median is the number in the middle. The middle of this is 8 and 10, so you plus them and divide by to 2, then it gives 9, so the median is 9.

Answer:

condition

Step-by-step explanation:

An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).

This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.

On the other hand, an observational study can be defined as a type of study in which a researcher observes and measures the effect of a diagnostic test, risk factors, or treatments on individuals without intervening, changing or manipulating who are or aren't exposed to it (controlled conditions).

Hence, the main purpose of doing an experiment over an observational study is to learn whether a certain condition causes a certain response.

Cause and effect can be defined as the relationship between two things or events in which an occurrence of one (cause) leads to the occurrence of another (effect).

Answer:

hope that is helpful

Step-by-step explanation:

W= VI

W= VI

I. I

V= W

I

Answer:

V = [tex]\frac{W}{I}[/tex]

Step-by-step explanation:

Given

W = VI ( isolate V by dividing both sides by I )

[tex]\frac{W}{I}[/tex] = V

Answer:

$5084745.76271

Step-by-step explanation:

Given data

Final amount= $6000000

Rate=6%

Time= 3 years

Now let us find the initial amount which is the principal

using the simple interest formula we have

6000000 = P(1+0.06*3)

6000000 =P(1+0.18)

6000000 =P*1.18

P= 6000000 /1.18

P=$5084745.76271

Hence the initial deposite is $5084745.76271

Answer:

54°

Step-by-step explanation:

Here :-

Measure of 6 :-

Answer:

m<6 = m<2 = 54º

Step-by-step explanation:

13x + 9 + 5x + 9 = 180

18x + 18 = 180

18x = 180 - 18

18x = 162

x = 162 / 18

x = 9

13x + 9

13(9) + 9

126

180 - 126

54

m<6 = m<2 = 54º

Answer:

A: The y-intercept of f(x) is equal to the x-intercept of g(x)

Step-by-step explanation:

From the equation of f(x) given, we have;

f(x) = -4(1.09)^(x)

Now,the y-Intercept will be the point where x = 0.

Thus;

f(0) = -4(1.09)^(0)

f(0) = -4

Now,from the table given for g(x), we can see that at x = 0,g(x) = -4.

Thus,it means that the y-intercept of f(x) is equal to the x-intercept of g(x)

Answer:

p = 0

Step-by-step explanation:

1 - 4p - 2p = 1 - 5p

-6p + 1 = -5p + 1

-p + 1 = 1

-p = 0

p = 0

Given:

For en exponential function f(a):

[tex]f(-3)=18[/tex]

[tex]f(1)=59[/tex]

To find:

The value of f(0).

Solution:

The general form of an exponential function is:

[tex]f(x)=ab^x[/tex]          ...(i)

Where, a is the initial value and b is the growth/ decay factor.

We have, [tex]f(-3)=18[/tex]. Substitute [tex]x=-3,f(x)=18[/tex] in (i).

[tex]18=ab^{-3}[/tex]            ...(ii)

We have, [tex]f(1)=59[/tex]. Substitute [tex]x=1,f(x)=59[/tex] in (i).

[tex]59=ab^{1}[/tex]            ...(iii)

On dividing (iii) by (ii), we get

[tex]\dfrac{59}{18}=\dfrac{ab^{1}}{ab^{-3}}[/tex]

[tex]3.278=b^{1-(-3)}[/tex]

[tex]3.278=b^{4}[/tex]

[tex](3.278)^{\frac{1}{4}}=b[/tex]

[tex]1.346=b[/tex]

Substituting the value of b in (iii).

[tex]59=a(1.346)^1[/tex]

[tex]\dfrac{59}{1.346}=a[/tex]

[tex]43.83358=a[/tex]

[tex]a\approx 43.83[/tex]

The initial value of the function is 43.83. It means, [tex]f(0)=43.83[/tex].

Therefore, the value of f(0) is 43.83.

Answer:

maybe 12 because

Step-by-step explanation:

30/25=1.2

10×1.2=12

Answer:

The circumference of Earth's equator is 40,080 km.

Step-by-step explanation:

Given that every 24 hours, Earth makes a full rotation around its axis, and Earth's speed of rotation at the equator is 1,670 km per hour, to determine what is the circumference of Earth's equator the following calculation must be performed:

24 x 1,670 = X

40,080 = X

Therefore, the circumference of Earth's equator is 40,080 km.

Answer:

mean value of female = 10.000

standard deviation of female = 1.604

mean value of male = 10.000

standard deviation of male = 2.449

Step-by-step explanation:

Given:

n=8 females

n=8 males

The objective is to find the mean and deviation and also based on the mean and the standard deviation have to describe the differences in intelligence scores for males and females

Solution:

The mean and the standard deviation are found by using MINITAB

The MINITAB procedure is explained as follows,

Step 1

choosing start > Basic statistics > Display Descriptive Statistics

Step 2

In variables supposed to enter the columns Female and Male

Step 3

Here choosing option statistics and select Mean and standard deviation

Step 4

Finally clicking OK

MINITAB output is as follows,

variable Mean standard deviation

Female 10.000 1.604

Male 10.000 2.449

b)

From the MINITAB output the mean are same for females and males.

Here the standard deviation of females is less than the standard deviation of males. That is the male scores are more variable when compared to female scores.

Answer:

Exact surface area = 500+20pi square cm

=============================================================

Explanation:

All areas mentioned are in square cm, which can be abbreviated to cm^2.

Faces A,B,C are straight forward as they are simply rectangles. The remaining 3 other faces are a bit tricky.

Faces D and E involve subtracting off the area of a semicircle of radius 2 from a 7 by 10 rectangle area. The formula pi*r^2 is the area of a full circle, while 0.5*pi*r^2 is the area of a semicircle. From there, I then plugged in r = 2.

The top face is really a combination of 3 different pieces (two flat, one curved in the middle). Each flat part is of area 3*12 = 36, so that doubles to 2*3*12 when accounting for both flat parts. The curved portion will involve the lateral surface area of a cylinder formula which is

LSA = 2*pi*r*h

but since we're only dealing with half the lateral area, we multiply that by 0.5 to get 0.5*2*pi*r*h. From there, I plugged in r = 2 and h = 12.

-----------------------

In summary we have these six areas for the faces

Add up those sub areas to get the full surface area of this particular 3D solid.

120+84+84+(70-2pi)+(70-2pi)+(72+24pi)

(120+84+84+70+70+72)+(-2pi-2pi+24pi)

500+20pi

This is the exact surface area in terms of pi. If you want the approximate version of this, then you could replace pi with 3.14 and compute to get 562.8 cm^2

Use more decimal digits in pi to get a more accurate value. If you use your calculators version of pi, then you should get somewhere around 562.831853 cm^2

In this case, I think it's better to stick with the exact surface area (unless your teacher instructs otherwise).

Answer:

113

Step-by-step explanation:

[tex]\large {\text {$ \sf \cfrac{1}{2x^2} -2 = 0 $}}[/tex]

[tex]\large {\text {$ \sf \cfrac{1}{2x^2}\cdot \:2x^2-2\cdot \:2x^2=0\cdot \:2x^2 $}[/tex]

                 [tex]\searrow[/tex]

                     [tex]\large {\text {$ \sf 1-4x^2=0$}}[/tex]

[tex]\large {\text {$ \sf -4x^2+1 = 0 $}}[/tex]

[tex]\large {\text{$\sf x=\cfrac{-b\pm\sqrt{b^2-4ac}}{2a} \quad\rightarrow\quad x=\cfrac{-0\pm\sqrt{0^2-4\cdot (-4) \cdot1} }{2\cdot (-4) } \:\rightarrow\:\: x=\cfrac{-0^2 \pm4}{2 \cdot(-4)} $}}[/tex]  

                                                             [tex]\huge {\text {$ \sf \downarrow$}}[/tex]

           [tex]\large {\text {$\sf {\bf x_1} = \cfrac{-0+4}{2\left(-4\right)}= \cfrac{-1}{2} $}}[/tex]                        [tex]\large {\text {$\sf {\bf x_2 }=\cfrac{-0-4}{2\left(-4\right)} = \cfrac{1}{2} $}}[/tex]

[tex]\large {\boxed {\boxed { \bf x_1 + x_2= -\cfrac{1}{2}+ \cfrac{1}{2} = 0} }}[/tex]

                                           [tex]\huge {\text {$ \it Alternative \: A $}}[/tex]

Answer:

b ≈ 48.6°

Step-by-step explanation:

Using the sine ratio in the right triangle

sin b = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{9}{12}[/tex] , then

b = [tex]sin^{-1}[/tex] ([tex]\frac{9}{12}[/tex] ) ≈ 48.6° ( to 1 dec. place )

Answer:

5 units!

Step-by-step explanation:

Because Rectangle Perimeter = 2(a+b)

a=2w-1, b=w

2(2w-1+w)=28

3w-1=14

3w=15

w=5

So the answer is 5! 5! 5! A!A!A!

Fighting!! o(≧o≦)o

Answer:

-5 + 3(7.2 - 3.2) equals 7.

Step-by-step explanation:

The order of operations states the order in which different mathematical operations should be done first, you can use the mnemonic PEMDAS to remember the order to complete each operation. PEMDAS states that the order must be followed as Parenthesis, Exponents, Multiplication/Division, and Addition/Subtraction. In the expression -5 + 3(7.2 - 3.2), the three mathematical operations being used are subtraction, multiplication, and parenthesis, so based on PEMDAS, the order to complete them is parenthesis, multiplication, and subtraction. -5 + 3(7.2 - 3.2) = -5 + 3(4) = -5 + 12 = 7, so that is your final answer.

[tex]\displaystyle\bf -5+3(7.2-3.2)=7\\\\1)\:7.2-3.2=4\\\\2)\:4\cdot3=12\\\\3)\:12-5=7[/tex]

Answer:

each member needs to put in 91.70 dollars in.

Step-by-step explanation:

you add the costs of all the tools needed. in this case the two controllers and wheels which adds up to 275.1.

then you divide by the amount of people which is three. so 275.1/3 and you get 91.7

Step-by-step explanation:

=> (3x-12) =(x+6)

or,3x - x = 6 + 12

or,2x = 18

or,x = 18/2

•: x=9#