With a density of 0.875 g/cm³, a sample of 0.60 g of this oil would have a volume V such that
0.875 g/cm³ = (0.60 g)/V ==> V ≈ 0.686 cm³
If the oil is spread out uniformly over the water's surface, then it forms a cylinder whose diameter is equal to that of the dish, 21.6 cm. Then the thickness d of the oil cylinder is such that
V = π ((21.6 cm)/2)² d ==> d ≈ 0.0202 cm
wite a paragraph explaining the difference between things that have matter and things that don't have matter.
Answer: Matter is how much space or opacity an object takes up. In short anything that take up space. Things like balls, trees, and even people are all made of matter. Mass is how much matter a object has. Air also has mass also, even though we can't see it. Things like cars, buildings, even planets have mass.
Explanation: Paragraphs are sometimes 4-6 sentences.
Two electric bulbs marked 25W – 220V and 100W – 220V are connected in series to a 440Vsupply. Which bulbs will fuse?
Answer:
25 W bulb will fuse.
The voltages will divide their ratios between the bulbs if we were to connect them.
Read the following paragraphs, then answer the question on the right.
After handling contaminated dog food, fourteen people in nine states became ill from salmonella. According to the Centers for Disease Control and Prevention (CDC), the people who got sick had given that same contaminated dog food to their pets. At least five people were taken to a hospital, but the incident did not affect any of their dogs.
When people handle contaminated pet food and do not wash their hands well before eating or handling food, they can become ill with salmonella.
The plant that made the dog food was closed while the issue was investigated. The same plant had made food that was recalled by the pet food company four different times in the previous five months. Upon reopening the plant, the company issued a statement that it had taken action to fix the problems.
The cause of the illness was?
A.Not washing hands
B.Salmonella on dog food
C.Unknown
Answer:
i think the answer was
B.Salmonella on dog food
The cause of the illness was Salmonella on dog food, therefore the correct answer is option B.
What is science?Science is the methodical, empirically-based pursuit and application of knowledge and understanding of the natural and social worlds.
As stated in the article, the dog food manufacturing facility was shut down while the situation was looked into.
Four times in the preceding five months, the pet food manufacturer had to recall food that was produced at the same factory.
The business said in a statement after reopening the facility that it has taken steps to address the issues caused by Salmonella in dog food.
Thus, the cause of the illness was Salmonella on dog food, therefore the correct answer is option B.
Learn more about the science here,
https://brainly.com/question/18186842
#SPJ2
An astronaut floating in space is trying to use her jetpack to get back to her space station, but she is being pulled away by a nearby planet, as shown in the image below. Her jetpack provides a constant thrust of 165 N. If she angles her jetpack in such a way that it cancels out the vertical force due to the planet's gravity, what is her net horizontal force?
A. 132.6 N toward the space station
B. 53.3 N away from the space station
C. 98.5 N toward the space station
D. 112.8 N away from the space station
Answer:
C. 98.5N toward the space station
Explanation:
Fx= Fjet×cos(20) - Fplanet × cos(45) = 98.5
Because the result is positive so she is going toward the space station
Select the best answer for the question.
17. How many mL of HEPARIN 10,000 units/mL are needed for a 7,000 unit dose?
O A.0.7
O B. 0.07
O C.7
O D. 0.007
0.7 mL of HEPARIN 10,000 units/mL is needed for a 7,000 unit dose.
To calculate the volume of HEPARIN 10,000 units/mL needed for a 7,000 unit dose, we can use the formula:
Volume (mL) = Dose (units) / Concentration (units/mL)
Given that the dose is 7,000 units and the concentration of HEPARIN is 10,000 units/mL, we can plug these values into the formula:
Volume (mL) = 7,000 units / 10,000 units/mL
Volume (mL) = 0.7 mL
So, 0.7 mL of HEPARIN 10,000 units/mL is needed for a 7,000 unit dose. However, none of the provided answer choices match exactly with 0.7 mL. The closest option is B. 0.07 mL, which is one-tenth of 0.7 mL. Therefore, the correct answer is B. 0.07 mL.
To learn more about HEPARIN, here
https://brainly.com/question/31118361
#SPJ2
How far will a bus travel if it averages a speed of 65 km/h for 7 hours?
What are you solving for?
What’s the equation?
Show work!
distance= speed*time
distance=65*7=455km
What do you know about physical education write one paragraph
For P.E
Answer:
PE is an abbreviation for 'physical education'. Physical education is a course taught in school that focuses on developing physical fitness and the ability to perform and enjoy day-to-day physical activities with ease. Kids also develop skills necessary to participate in a wide range of activities, such as soccer, basketball, or swimming. Physical Education (PE) develops students' competence and confidence to take part in a range of physical activities that become a central part of their lives, both in and out of school. A high-quality PE curriculum enables all students to enjoy and succeed in many kinds of physical activity.
Physical education is defined as formal instruction in exercise and proper eating. An example of physical education is gym class taught in middle school. ... Instruction in physical exercise and in the care and hygiene of the human bod
the precision of interferometer of wavelength of light 800 nm would be: (a) 200 nm (b) 100 nm (c) 400 nm (d) 800 nm
Answer:
Explanation:
Did this come with a Picture?
5 The diagram shows a quantity of gas enclosed in a cylinder by a piston.
moves to the left
gas
+moves to the right
cylinder
piston
The piston is moved to the left or to the right. The temperature of the gas is kept constant
Which row describes the effect of moving the piston slowly in the direction shown in the table?
movement
of piston
speed of gas
molecules
pressure
of gas
A
to the left
increases
decreases
B
to the left
no change
increases
с
to the right
to the right
dreases
debebas
increases
D
no change
6 What causes the random, zig-zag movement (Brownian motion of smoke particles susne ded in
Answer:
A to the left increases and decreases
Carnot Engine: A Carnot cycle consists of 179) A) four adiabats. B) two adiabats and two isobars. C) four isotherms. D) two adiabats and two isotherms. E) two isobars and two isotherms
Answer:
which question is this
Explanation:
I don't understand sorry
How net current on a toroid is zero?
Answer:
The concept of zero net current in toroid occurs when we try to determine magnetic field induction outside toroid.
to determine magnetic field outside toroid, we consider a circular loop outside toroid as shown in figure.
to get the net enclosed current inside the loop, let us consider the crosssection AA' in toroid as shown in figure
as we see the crosssection AA' part of figure, we see that currents in the winding are in opposition directions at near to the loop
and far away from loop. Hence the concept of net current zero occurs in toroid when we try to determine
magnetic field induction outside toroid.
Have a Good day...
What is the mass of a body? How is it measured?
The mass of a body is a measure of its inertial property or how much matter it contains.
Body mass index (BMI) is a measure of body fat based on height and weight that applies to both adult men and adult women. To determine BMI, weight in kilograms is divided by height in meters, squared
Mass is both a property of a physical body and a measure of its resistance to acceleration (rate of change of velocity with respect to time) when a net force is applied. An object's mass also determines the strength of its gravitational attraction to other bodies.
How is it measured?Mass is measured in kilogram.
What is used to measure it?To measure mass, we usually use a balance. In the lab, mass may be measured with a triple beam balance or an electronic balance. But an old fashioned beam balance gives the most accurate value.
Hope it helps you... pls mark brainliest if it helps youConvert 4 centimeters to meters using dimensional analysis and scientific notation. Please go step by step as I am having difficulty with this subject.
Answer:
[tex]thank \: you[/tex]
Jo, Daniel and Helen are pulling a metal ring. Jo pulls with a force of 100N in one direction and Daniel with a force of 140N in the opposite direction. If the ring does not move, what force does Helen exert if she pulls the same direction as jo?
Answer:
she is pulling with 40 N force
Explanation:
The ring does not move means that the forces are equal.
Let's call Jo's force x
We have the quation
140 = x + 100
x = 40
I need some help, this is going to be late.
Answer:
gravitational force
Explanation:
since they seem like they are falling, gravity usually pulls them down
i think its gravitational force
An eccentric emu runs 20 m/s for 5 minutes for the first part of his trip to Hollywood. Once tired, the emu runs slower speed for the next hour. The average velocity of the emu is 15 m/s. what speed was the emu running when he was tired?
Answer:
14.6 m/s
Explanation:
The total run time was 5 + 60 = 65 minute or 65(60) = 3900 s
At his average velocity, emu ran 15 m/s(3900 s) = 58,500 m
Which is a heck of a running distance for ANY emu.
In the first 5 minutes the emu traveled 20 m/s(5 min)(60 s/min) = 6000 m
So in the last hour (3600 s) the emu traveled 58,500 - 6000 = 52,500 m
at a speed of 52,500 m /3600 s = 14.583333333... m/s
The emu was running at a speed of 14.58 m/s when he was tired.
To solve this question, we'll begin by calculating the distance travelled in the first part of the trip. This can be obtained as follow:
Time (t₁) = 5 min = 5 × 60 = 300 s
Speed 1 (S₁) = 20 m/s
Distance 1 (d₁) =?Speed = distance / time
S₁ = d₁ / t₁
20 = d₁ / 300
Cross multiply
d₁ = 20 × 300
Distance 1 (d₁) = 6000 mNext, we shall determine the total distance travelled by the emu.
Average speed = 15 m/s
Time 1 (t₁) = 300 s
Time 2 (t₂) = 1 h = 60 mins = 60 × 60 = 3600 s
Total time (T) = t₁ + t₂ = 300 + 3600 = 3900 s
Total distance (D) =?Average speed = Total distance / total time
15 = D / 3900
Cross multiply
D = 15 × 3900
Total distance (D) = 58500 mNext, we shall determine the distance travelled in the second part (i.e when he was tired) of the trip.
Total distance (D) = 58500 m
Distance 1 (d₁) = 6000 m
Distance 2 (d₂) =?D = d₁ + d₂
58500 = 6000 + d₂
Collect like terms
58500 – 6000 = d₂
Distance 2 (d₂) = 52500 mFinally, we shall determine the speed of the emu in the second part of the trip.
Distance 2 (d₂) = 52500 m
Time 2 (t₂) = 3600 s
Speed 2 (S₂) =?Speed = distance / time
S₂ = 52500 / 3600
S₂ = 14.58 m/sTherefore, the emu was running at a speed of 14.58 m/s when he was tired.
Learn more: https://brainly.com/question/24502267
Use the following information to calculate the speed of sound. A 2m long tube of air, closed at one end and open at the other, is excited using a speaker. Successive resonances/harmonics are observed to occur at 129, 215 and 301 Hz (Note: 129 Hz is not necessarily the fundamental frequency). Make sure you clearly show how you get your answer
Successive resonances/harmonics are observed to occur at 129, 215 and 301 Hz (Note: 129 Hz is not necessarily the fundamental frequency). the speed of sound is 76 added to 129 is 215
what is sound ?The pitch of the sound is a major property where the frequency of sound occur by human ear within the range of human hearing.
It is higher than the frequency of the sound where the higher is its pitch and a lower frequency means a lower pitch.
The loudness of sound is another property which can be determined by amplitude of the sound is a measure of the magnitude of the maximum disturbance of sound.
The speed is another property can be detrained as the sound waves which can travel through the medium is called the speed of sound and it is different for different mediums, travels fastest in solids.
For more details sound, visit
brainly.com/question/1502894
#SPJ5
4. The modern particle theory of matter was generally accepted
in what century? Whose concept of matter was overturned by
this revolution in science?
Answer:
the modern particle theory of matter was accepted in the mid-ninteenth century. Aistotle's continoues theory of matter was overturned. They gave matter order and determine many of its properties. your welcome :)
Two long straight parallel wires seperated by 20cm apart carry current of 20A and 1OA in opposite directions. What is the magnitude of the force on 1m length of the 20A wire
Answer:
Force is 2 × 10^-4 N
Explanation:
[tex]{ \bf{F = \frac{ \gamma_{o} I _{1} I _{2} l}{2\pi r} }}[/tex]
F is force
I is current
r is separation distance
gamma is a constant
l is wire length
[tex]F = \frac{(4\pi \times {10}^{ - 7}) \times (20) \times (10) \times 1 }{2\pi \times 0.2} \\ \\ F = 2 \times {10}^{ - 4} \: \: newtons[/tex]
The magnitude of the force on 1m length of the 20A wire is 2×10⁻⁴N.
To determine the answer, we need to know about magnetic field due to a current carrying wire and magnetic force.
What is the magnetic field produced due to a straight current carrying wire of current I₁?The magnetic field due to a straight wire having current I₁ at a perpendicular distance (say) 'd' is μ₀I₁ / 2[tex]\pi[/tex]d.
What is the magnetic force experienced by a straight wire of current I₂?Magnetic force on a current carrying wire of length 'L' and having current I₂ is I₂(L×B). Where B is the magnetic field at that wire.
What is the magnetic field on 20A wire due to 10A wire?d= 0.2m and I₁= 10AB= μ₀I₁ / 2[tex]\pi[/tex]d = 4[tex]\pi[/tex] ×10⁻⁷× 10/ 2[tex]\pi \\[/tex]×0.2 = 10⁻⁵ TWhat is the force on 20A wire?Current (I₂) = 20A, B = 10⁻⁵T and L= 1mMagnitude of force on the 20 A wire of length 1m = I₂×L×B( Here L and B are perpenicular to each other so L×B= L·B)
= 20×1×10⁻⁵
=2×10⁻⁴N
Thus, we can conclude that the magnitude of the force on 1m length of the 20A wire is 2×10⁻⁴N.
Learn more about magnetic force here:
https://brainly.com/question/25932320
#SPJ2
Prove that s=ut+½at²
Explanation:
Distance travelled = Area under the line
= ut + ½ (v-u)t
Acceleration (a) = (v-u)/t and so (v-u) = at
Therefore,
Distance travelled (s) = ut + ½ (v-u)t = ut + ½ (at)t = ut + ½ at²
Thus,proved.
A probability of breaking a tree is more than a short one during storm.why?
Answer:
Due to interia of motion
I need someone smart!
why is the multiverse considered a theory if it has no observational or experimental evidence?
shouldn't it be considered a plausible hypothesis instead, sense it has no evidence but is lickely the case?
Answer:
It is a theory
Explanation:
There’s no form or proof or anything even tho it is a hypothesis it’s common and has no evidence due towards it
1. A leftward force is used to pull a large wagon. In the wagon there is an unknown mass
that makes it very difficult to move, but a force applied is able to set the wagon into
constant motion. Let the force applied to the wagon and its unknown mass be 77.3 N. The
coefficient of friction between the wagon's wheels and the floor is 0.011. Determine the
mass of the wagon if it was empty.
i. Let's say that the unknown mass in the wagon is 95.5% * mass of the
wagon. What is the weight of the wagon when its empty and what is the
weight of the unknown mass?
Answer:
Wagon weight 366.41314(9.81) = 3,594.5129 = 3590 N
Load weight 349.9245(9.81) = 3,432.75982 = 3430 N
Explanation:
Let's assume the surface and the applied force are horizontal.
At constant motion, the friction force must balance the applied force
(from F = ma)
Ff = 77.3
μΝ = 77.3
μmg = 77.3
m = 77.3 / (0.011(9.81))
m = 716.3376... kg
Let M be the mass of the wagon
M + 0.955M = 716.3376
M(1.955) = 716.3376
M = 366.41314...kg
0.955 M = 349.9245... kg
round to the three significant digits of the question numerals.
if your average speed is 3 m/s, how far have you traveled in 1 second, 2 second, 3 seconds?
Answer:
in 1 second 3m, in 2 seconds 6m, in 3 seconds 9m.
Explanation:
distance=speed × time
what change occurs to the gravitational force of attraction between two bodies when the distance between them is made half 1 by 2 by keeping masses constant
Explanation:
Since the gravitational force is inversely proportional to the square of distance, changing the distance to half the original results in 4 times the original force
Compare the movement of four cars. Car A covered a distance of 60 km in 1hr.
Car B covered a distance of 30 km in 30 minutes. Car C covered a distance of 20
km in 15 minutes, Car D covered a distance of 10 km in 7 minutes, which car had
the highest velocity?"
Answer:
car D
Explanation:
1) before to compare all the values of the velocities, they must be in the same units of measurement. It means:
for car A: V=60km / 1h=60km/h;
for car B: V=30km / 0.5h=60km/h;
for car C: V=20km / 0.25h=80km/h;
for car D: V=10km / (7/60)h≈85.7km/h.
2) according to the values calculated in item 1 the car D had the highest velocity.
Answer:
Below
Explanation:
We can use this formula to find the velocity of an object
velocity = displacement / change in time
*note I converted all distances to meters and all times to seconds, its not necessary though**
CarAvelocity = 60,000 m / 3600 sec
= 16.66667 m/s
CarBvelocity = 30,000 m / 1800 sec
= 16.66667 m/s
CarCvelocity = 20,000 m / 900 sec
= 22.2222 m/s
CarDvelocity = 10,000 m / 420 sec
= 23.80952 m/s
Therefor, car D has the highest velocity
Hope this helps!
Any measure that shows the central tendency or variation in a sample is called
I think the answer is averages.
Answer:
averages.
Explanation:
The term central tendency dates from the late 1920s. The most common measures of central tendency are the arithmetic mean, the median, and the mode.
multiples and submultiples of kg
Answer:
Submultiples of kilogram are decagram ,centigram etc. And multiples of kilogram is megagram(1 tonne) , gigagram etc.
hope this helps you:)
What is motion please explain with diagram
Answer:
An object in a motion when it is continuously changing its position based on a reference point and observed by a person or a device.
Which of the following biogeochemical cycles moves water through the atmosphere, surface, and crust of Earth?
A. Carbon cycle
B. Hydrologic cycle
C. Nitrogen cycle
D. Phosphorus cycle