A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to Group of answer choices sulfur, oxygen, or fluorine. oxygen or nitrogen. fluorine, oxygen, or nitrogen. nitrogen, fluorine, oxygen, or nitrogen. chlorine, fluorine, or iodine.

Answers

Answer 1

Answer: A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to (fluorine, oxygen, or nitrogen)

Explanation:

A hydrogen bond is a strong dipole-dipole attraction which occurs between

--> the hydrogen atom attached to a strongly electronegative atom, and

--> another strongly electronegative atom with a lone pair of electrons.

When an electronegative atom such as fluorine, oxygen or Nitrogen is bonded to hydrogen, a dipole develops causing the hydrogen to be partially negative. The electrostatic attraction between the partially positive hydrogen atom in one molecule and the partially negative atom of the more electronegative element in another molecule gives rise to the strong dipole-dipole attraction called hydrogen bonding.

Hydrogen fluoride, water and ammonia contain the three most electronegative elements, fluorine, oxygen and nitrogen respectively, linked directly to hydrogen. In addition, lone pairs of electrons are present in the fluorine, oxygen and nitrogen atoms of the three hydrides, making hydrogen bonds to form easily between them. These compounds which exhibits hydrogen bonding always have higher melting and boiling points.


Related Questions

GIVING BRAINLIEST
Which equations are used to calculate the velocity of a wave?
O velocity = distance ~ time
velocity = wavelength x frequency
velocity = distance/time
velocity = wavelength/frequency
velocity = distance/time
velocity = wavelength x frequency
velocity = distance ~ time
velocity = wavelength/frequency

Answers

Answer:

velocity = distance/time

velocity = wavelength × frequency

Both of these are commonly known equations to calculate velocity with different variables.

How many Noble gases we have in Periodic Table???

Answers

Answer:

Six

Explanation:

6.

The six naturally occurring noble gases are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and the radioactive radon (Rn).

Un sistema formado por una única sustancia, ¿será siempre homogéneo? ¿Porqué? Piensa a partir de las definiciones y trata de corroborar o negar usando ejemplos concretos.

Answers

Una sustancia homogénea es una sustancia que se compone de una sola fase.

Recordemos que definimos una fase en química como "cantidad química y físicamente uniforme u homogénea de materia que se puede separar mecánicamente de una mezcla no homogénea y que puede consistir en una sola sustancia o una mezcla de sustancias" según Ecyclopedia Britiannica.

El hecho de que un sistema esté compuesto por una sola sustancia no lo hace es autóctono. A veces, un sistema puede estar compuesto por partículas sólidas de una sustancia en equilibrio con su líquido. El sistema contiene solo una sustancia pero en diferentes fases, por lo tanto, el sistema contiene una sustancia pero no es homogéneo.

Por tanto, el hecho de que un sistema contenga una sola sustancia no significa necesariamente que sea homogéneo.

https://brainly.com/question/9970247

Question 4
18 g of carbon dioxide contains how many oxygen atoms?

Answers

Answer:

4.92×10²³ atoms of oxygen.

Explanation:

We'll begin by calculating the number of mole of oxygen in 1 mole of CO₂. This can be obtained as follow:

1 mole of CO₂ contains 2 mole of oxygen.

1 mole of CO₂ = 12 + (2×16)

= 12 + 32

= 44 g

Thus,

44 g of CO₂ contains 2 moles of oxygen.

Next, we shall determine the number of mole of oxygen in 18 g of CO₂. This can be obtained as follow:

44 g of CO₂ contains 2 moles of oxygen.

Therefore, 18 g of CO₂ will contain

= (18 × 2)/ 44 = 0.818 mole of oxygen.

Finally, we shall determine the number of atoms in 0.818 mole of oxygen. This can be obtained as follow:

From Avogadro's hypothesis,

1 mole = 6.02×10²³ atoms.

Therefore,

0.818 mole = 0.818 × 6.02×10²³ atoms.

0.818 mole of oxygen = 4.92×10²³ atoms.

Thus, 18 g of CO₂ contains 4.92×10²³ atoms of oxygen.

you want to remove as much CO2 gas as possible from a water solution. Which of the following treatments would be most effective?

Answers

Answer:

Aerate solution

Explanation:

aerate solution is the best way to remove CO2 from water (Carbon dioxide in the water that does not form bicarbonates is “uncombined” and can be removed by aeration).

Karl-Anthony is trying to plate gold onto his silver ring. He constructs an electrolytic cell using his ring as one of the electrodes. He runs this cell for 94.3 minutes at 205.3 mA. How many moles of electrons were transferred in this process

Answers

Answer:

0.012 moles of electrons were transferred

Explanation:

We can find the number of electrons transferred from the time in seconds and the current in Amperes using the equation:

n = I*t / F

Where n are moles of electrons transferred

I is current in Amperes = 0.2053A

t is time in seconds:

94.3min*(60s/1min) = 5658s

F is faraday constant 96485A*s/mol

Replacing:

n = 0.2053A*5658s / 96485A*s/mol

n = 0.012 moles of electrons were transferred

Moles are the mass per unit molar mass of compound. The number of moles of electrons that are transferred is 0.012 moles.

What is an electrolytic cell?

An electrolytic cell is a type of electrochemical cell that uses electrical energy from external sources to conduct the chemical energy in a cell.  

The moles transferred in electrolytic cells are measured as:

[tex]\rm n = \rm \dfrac{I\times t}{F}[/tex]

Given,

Current (I) in amperes = 0.2053 A

Time (t) in seconds = 5658 sec

Faraday constant (F) = 96485 A -s/mol

Substituting values in the equation above moles (n) can be calculated as:

[tex]\begin{aligned} \rm n &= \dfrac{ 0.2053 \times 5658 }{96485}\\\\&= 0.012 \;\rm mol\end{aligned}[/tex]

Therefore, 0.012 moles are transferred in this process.

Learn more about electrolytic cells here:

https://brainly.com/question/22514717

The functional groups in an organic compound can frequently be deduced from its infrared absorption spectrum.

a. True
b. False

Answers

Answer:

a. True

Explanation:

The main information that gives an infrared absorption spectrum is the type of functional groups that are present in an organic compound. The infrared (IR) spectroscopy is based on the fact that functional groups absorb light in the IR region of the electromagnetic spectrum (approximately at 2,500-16,000 nm) and induces a vibrational excitation of the covalently bonded atoms in the group. The vibration of the atoms can be of different types, such as stretching, bending, etc. Each functional group (such as the carbonyl group) in an organic compound absorbs at a specific IR frequency so they can be distinguished from an IR spectrum.

which list only includes terms that describe... both questions please

Answers

The terms that describe sodium atom are;

AtomelementPure substance

The terms that describe propane gas are;

MoleculeCompoundPure substance

Sodium can be described as an element found in the periodic table. Sodium can also be described as an atom as in when we make the statement; 'an atom of sodium'. Sodium can also be regarded as a pure substance as in when we are referring to a substance composed only of sodium atoms.

On the other hand, propane gas can be regarded first as a compound because it is a combination of elements that are chemically combined together. We can also refer to 'a molecule of propane gas' since the substance is molecular in nature. Also, the pure gas (containing no impurity) can be regarded as a pure substance.

Learn more: https://brainly.com/question/13947925

(URGENT FOR BRAINLIEST!!)
The diagram below shows the movement of Earth plates.

The picture shows two Earth plates one beside the other. The plate on the left is shown moving towards the right and the plate

Which of these features is most likely formed as a result of the movement of Earth plates shown in the diagram? (2 points)


a canyon

a fault

a mountain

a ridge

Answers

Answer:

mountain

Explanation:

when plates move towards each other they create mountains

Sodium acetate

NaC2H3O2

SC2H3O2

Na2C2H3O2

Answers

Answer:

Sodium acetate is NaC2H3O2

Answer:

The answer is A for the lazy people.

What is the change in the freezing point of a solution made by dissolving 14.7 g of
C6H1206 into 150 ml of water? Answer in 2 decimal.
The density of water is 1.00 g/ml and and Kf = 1.86 °C/m

Answers

The change in freezing point is 1.02°C

The change in the freezing point (ΔTf) is calculated from the following equation:

ΔTf = i x Kf x m

Given:

i = 1 (Van't Hoff factor, is equal to 1 because the solute is a nonelectrolyte)

Kf = 1.86°C/m (Freezing point constant of the solvent)

m = molality

We have to calculate the molality (m), which is equal to the moles of solute in 1 kg of solvent:

m = moles solute/ kg solvent

The solute is C₆H₁₂O₆. Thus, we calculate the moles of solute by dividing the mass into its molecular weight (Mw):

Mw(C₆H₁₂O) = (12 g/mol C x 6) + ( 1 g/mol H x 12) + (16 g/mol O x 6) = 180 g/mol

moles solute = mass C₆H₁₂O/Mw(C₆H₁₂O) = 14.7 g/(180 g/mol) = 0.082 mol

The solvent is water. Its mass (in kg) is obtained from the volume and the density, as follows:

kg solvent = V x density = 150 mL x 1.00 g/mL x 1 kg/1000 g = 0.15 kg

Now, we calculate the molality (m):

m = moles of solute/kg solvent = 0.082 mol/(0.15 kg) = 0.546 m

Finally, we calculate the change in freezing point:

ΔTf = i x Kf x m = 1 x 1.86°C/m x 0.546 m = 1.02°C

To learn more about freezing point depression, you can visit this content:

https://brainly.com/question/4258941

Three bonding pairs around a central atom results in a ________. A. octahedral B. trigonal planar compound C. tetrahedral compound D. linear compound

Answers

Answer:

B

Explanation:

because it is a trigonal planar compound

Three bonding pairs around a central atom results in a trigonal planar compound. Option B is correct.

In a trigonal planar arrangement, the central atom is surrounded by three bonding pairs of electrons, forming a flat, triangular shape. The bond angles between the bonding pairs are approximately 120 degrees.

This molecular geometry is observed when a molecule has a central atom with three bonded pairs and no lone pairs. Examples of compounds with  trigonal planar geometry include boron trifluoride (BF₃) as well as formaldehyde (H₂CO).

The other options are not correct for a molecule with three bonding pairs;

Octahedral refers to a molecular geometry with six bonding pairs around a central atom.

Tetrahedral corresponds to a molecular geometry with four bonding pairs around a central atom.

Linear represents a molecular geometry with two bonding pairs around a central atom.

Hence, B. is the correct option.

To know more about bonding pairs here

https://brainly.com/question/32421783

#SPJ2

I don’t know what Ksp and Kf are stand for?

Answers

Answer:

Sorry but I know only what ksf stand for

Explanation:

Ksf stand for solubility product constant

Answer:

ksp stands for solubility product constant .

kf stands for molal freezing point depression constant ..

Explanation:

KSP = The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution. It represents the level at which a solute dissolves in solution. The more soluble a substance is, the higher the Ksp value it has .

KF = Kf is a constant for a given solvent. Kf is called the molal freezing point depression constant and represents how many degrees the freezing point of the solvent will change when 1.00 mole of a nonvolatile nonionizing (nondissociating) solute dissolves in one kilogram of solvent.

8. Benzene is an aromatic hydrocarbon with molecular formula C6H6. a) Draw the ring structure of Benzene. [1] how will you prepare benzene from phenol​

Answers

When phenol is heated with zinc dust benzene is obtained.

A nuclease enzyme breaks the covalent bond originally connecting the phosphate to the 5' carbon in a nucleic acid. After allowing this enzyme to completely digest the nucleic acid down to monomers, you perform tests to determine where the phosphate is attached to each monomer. Where do you expect to find this phosphate

Answers

Answer:

The phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.

Explanation:

The structure of nucleic acid polymers is built up from monomers of nucleotides.

A nucleotide consists of a sugar backbone which is either a ribose or deoxyribose sugar, a nitogenous base which is either a purine or pyrimidine, and a phosphate group. The nitrogenous base is attached to the carbon number 1 or C-1 of the sugar backbone by a covalent bond. The phosphate group on the other hand is covalently attached to the carbon number 5 or 5' carbon of the sugar backbone.

When polymers of nucleic acids are formed, the phosphate at the 5' carbon of the sugar backbone is covalently linked in a phosphodiester bond to the 3' carbon of the sugar backbone in another nucleotide molecule, thus extending the strands of the nucleic acid molecule.

Nucleases are enzymes that break down the phosphodiseter bonds in nucleic acids resulting in nucleotide monomers. After complete digestion ofmthe nucleic acid polymer by nucleases, the phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.

A solution is made by mixing 34.5 g of sugar with 75.0 g of water. What is the mass percent of sugar in this solution?

Please explain and show work.

Answers

the mass percent of sugar in this solution is 46%.

Answer:

Solution given:

mass of solute=34.5g

mass of solvent=75g

mass percent=[tex]\frac{mass\:of\:solute}{mass\:of \:solvent}*100\%[/tex]

=[tex]\bold{\frac{34.5}{75.0}*100\%=46\%}[/tex]

We know that,

[tex]mass \: solute = \frac{mass \: of \: solute}{mass \: of \: solvent} [/tex]×100

[tex] \frac{34.5}{75.0} = 0.46[/tex]

hope it helps..

State the different radiations emitted by radioactive elements.

Answers

Answer:

gamma rays , alpha particles , beta particles , neutrons

So the different types of the three main types of radiation given off during radioactive decay, two are particles and one is energy; scientists call them alpha, beta and gamma after the first three letters of the Greek alphabet. Alpha and beta particles consist of matter, and gamma rays are bursts of energy.

Hope this helps :))

proteins contain
a. oxygen
b. nitrogen
c. hydrogen

Answers

Answer:

All of the above

Explanation:

Proteins contain a long chain of amino acids which are a chain of oxygen, nitrogen, carbon, hydrogen or sulfur.

HOPE THIS HELPED

Oxygen Nitrogen hydrogen

A Single Orbital With Two Lobes At 90°In A Single Plane And A Node In The Center Would Likely Be Found Where?

a.4s


b.4p


c.4d


d. it would not be found in any of these


e.4f

Answers

c i believe it is c

Determine
the
number
of grams of C4H10
that
are
required
to
completely
react
to
produce 8.70 mol of CO2
according
to
the
following
combustion
reaction:
2 C₄H₁₀(g)
+
13 O₂(g)

8 CO₂(g)
+
10 H₂O(g)

Answers

Answer:

8 CO₂(g)

Explanation:

just took the exam

arrange the metals sodium,copper, and magnesium in the decreasing order of their reactivity​

Answers

Answer:

sodium>magenisium>copper

WHAT WOULD THE RIGHT OPTION??

how many resonance structures of benzene are known?
A) 3
B) 4
C) 5
D) 6 ​

Answers

Answer:

C) 5

Step-by-step explaination:

Benzene has 5 resonance structures.

Which gas has the highest diffusing rate between nitrogen , oxygen , hydrogen and chlorine

Answers

Answer:

hydrogen

Explanation:

The gas with the least molecular weight effuses the fastest (Graham's Law). Hence, H gas has a higher rate of diffusion compared to N, O, and Cl.

So, Cl is the slowest when it comes to the rate of diffusion, because it has the highest molecular weight.

A) Draw a conclusion about the relationship between enzyme activity and reaction temperature.
B) Provide an explanation for why we see a flattening of the curve for the 75 degree reaction after 3 minutes.

Answers

Answer:

Direct relationship.

Explanation:

There is direct relationship between enzyme activity and temperature of reaction. Direct relationship means if one factor is increases the other factor is also increase and vice versa. In chemical reactions, the rate of an enzyme action increases as the temperature of the chemical reaction also increases. we see a flattening of the curve for the 75 degree reaction after 3 minutes because the enzyme action is not working at that temperature or in other words, this temperature is not suitable for the enzyme activity.

5. How many moles are present in 4.20x10^24 atoms of Pb

Answers

Explanation:

[tex]57816 \: moles[/tex]

are present in 4.20x10^24 atoms of Pb

Answer:

7 moles

Explanation:

(4.2*10^24)/(6*10^23)=7

You are titrating 24.3 mL of 2.00 M HCl with 1.87 M NaOH. How much NaOH do you expect to have added when you reach the equivalence point?

26.0 mL

15.4 mL

13.4 mL

Answers

Answer:

26mL

Explanation:

NaOH+HCl= NaCl+H2O

nHCl=0.0243*2=0.0486

nNaOh=nHCl

VNaOH=0.0486/1.87=0.026l=26ml

Answer:

26.0 mL

Explanation:

Select True or False: The equilibrium constant for the chemical equation 2NO(g) O2(g) 2NO2(g) is two times the equilibrium constant for the chemical equation NO(g) 1/2O2(g) NO2(g).

Answers

Answer:

False

Explanation:

The first reaction is;

NO(g) + 1/2O2(g) ---->NO2(g)

K= [NO2]/[NO] [ O2]^1/2

The second reaction is;

2NO(g) + O2(g) ---->2NO2(g)

K'= [NO2]^2/[NO]^2 [O2]

It now follows that;

K'= K^2

Hence the statement in the question is false

Which is the best interpretation of the two flat portions of the graph?

Answers

In those portions, the heat supplied to the substance by the heater does not lead to a temperature rise as intermolecular forces are broken.

When a substance is heated, we normally expect that its temperature will rise as a consequence.

However, heat may be supplied to a substance but its temperature does not rise owing to the fact that the heat energy supplied is used to break intermolecular bonds.

This occurs during fusion and boiling. The heat supplied at these point does not result in temperature rise since it is used to break intermolecular bonds. The temperature remains steady during these processes as shown by the two flat portions on the graph in the image attached to the question. This heat supplied is known as the latent heat.

For more about latent heat, see:

https://brainly.com/question/19863536

Answer:

The answer for me was "These show where changes of state are occuring"

Explanation:

I got it right

Identify the compound that possesses a permanent dipole. Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices acetone, (CH3)2CO cyclohexane, C6H12 pentane, C5H12 methane, CH4.

Answers

Answer:

acetone, (CH3)2CO cyclohexane are the compound that possesses a permanent dipole

Explanation:

Permanent dipole describes the partial charge separation that can occur within a molecule along with the bond dat form between 2 different atoms

A runner completes the 300-meter dash in 38 seconds. What is the speed of the runner? Round your answer to the nearest tenth.

Answers

Answer:

x= 300m , 38s

answer is 7.9

Answer:

speed=distance/time

Explanation:

speed=300/38

=7.8947368421

to the nearest tenth=7.9

Other Questions
Try this for yourself. Suppose you want to estimate the number of field mice in a small field. One day you capture 500 mice, mark all of them and release them. The next week you capture 200 mice of which 40 were marked by you yesterday. What is your estimate of the population size? Which way do the chlorophyll bands move on the chromatography paper? What is another name for CD? what is the purpose of the federal budget?a. it serves as a plan for gov spending each yearb. it allows the gov to default on its debtsc. it prevents the gov from creating a budget deficitd. it ensures that the gov will always have a surplus [tex] \frac{x}{2} + \frac{6}{x } = 4[/tex]using quadratic equation....help me if you can please help me! im having trouble Trudeaus Body Shop incurs total costs given by TC = 2,400 + 100 Q. If the price it charges for a paint job is $120, what is its break-even level of output? which word from the passage is an appeal to pathos The figure below shows the design of a truss to support the weight of a roof. In this truss design, AD and FDF. The model of decision making that explains how managers should make decisions, assuming managers will make logical decisions that will be the optimum in furthering the organization's best interests, is known as the ________. For example, a manager who uses this model may be personally opposed to outsourcing jobs overseas, but she nonetheless decides to outsource customer-service operations to India because doing so is in the company's best interests. Group of answer choices rational decision-making model solutions agenda focused decision-making model interpersonal-decision agenda employee relations model Help please-- Given circle O below, if arc GH and arc HJ are congruent, what is the measure of chord line HJ? Which of the following situations WOULD NOT represent a binomial application? A. Choosing a card randomly from a standard deck and noting its color (remember color has only two outcomes black or red) B. Choosing a card randomly from a standard deck and noting whether its a face card C. Choosing a card randomly from a standard deck and noting its suit D. Choosing a card randomly from a standard deck and noting whether or not it's an ace please help!! What is the equation of the line that passes through (0, 3) and (7, 0)? Como reducir una barra de silicona si es muy grande quien pueda me ayuda Rule 1: Multiply by 2 then add 1 starting from 1.Rule 2: Divide by 2 then add 4 starting from 40.Sequence 1Sequence 2Ordered PairsPLZ ANSWER FOR Brainiest What is the correct definition for sec theta? Find the x in the kite below What is the value of x 1. Which of the following is an example of binary form?A. a Beginning (A) section Followed by a contrasting (B) sectionB. a Beginning (A) section Followed by a contrasting (B), and ending with a repeated but shorter version of the beginning (A) sectionC. ABCBAD. ABA HURRY PLS Wood is an example of A. MetalloidB. InsulatorC. NonmetalD. Conductor