A motorcycle moves according to the velocity-time graph
shown in Figure 3.28. Find the average acceleration of
the motorcycle during each of the following segments of
the motion: (a) A, (b) B, and (c) C.

A Motorcycle Moves According To The Velocity-time Graphshown In Figure 3.28. Find The Average Acceleration

Answers

Answer 1

Answer:

a) 1 m/s²

b) -1 m/s²

c) 0 m/s² (constant speed, not accelerating)

Explanation:

A

delta speed = 10 - 0

delta time = 10 - 0

delta speed / delta time = 10/10

delta speed / delta time = 1

B

ds = 5 - 10

dt = 15 - 10

ds / dt = -5 / 5

ds / dt = -1

C

ds = 5 - 5

dt = 25 - 15

ds / dt = 0 / 10

ds / dt = 0

Answer 2

The average acceleration of A, B, and C will be 1 m/s², -1 m/s², and 0 m/s².

What is acceleration?

An object is considered to have been accelerated if its velocity changes. Depending on whether an object is moving faster, slower, or in a different direction, its velocity may change. Examples of acceleration include a falling apple, the moon orbiting the earth, and a car that has stopped at a stop sign. These examples demonstrate how acceleration occurs whenever a moving object modifies its direction, speed, or both.

There are different types of acceleration :

Uniform accelerationNon-Uniform AccelerationAverage acceleration

Average acceleration is defined as the average change in velocity with respect to the average change in time.

SI unit is m/and it is vector quantity.

According to the question,

For A, Acceleration= (v₁-v₀)/(t₁-t₀)

⇒10-0/10-0

= 1 m/s².

For B, Acceleration= (v₃-v₂)/(t₃-t₂)

⇒5-10/15-10

= -1 m/s²

For C, Acceleration will be constant because change in velocity is constant, this is the case of uniform motion, so its acceleration is also going to be constant (as per the definition of acceleration change in velocity ratio change in time).

For more information about acceleration :

https://brainly.com/question/12550364

#SPJ2


Related Questions

A tuning fork of frequency 254 Hz and an open orang pipe of slightly lower frequency are at 15oC. When
sounded together, they produce 4 beats per second. On altering the temperature of the air in the pipes,
it is observed that the number of beats per second first diminishes to zero and then increases again to 4.
By how much has the temperature of the air in the pipe been altered?

Answers

The temperature of the air in the open orang pipe has been altered by 18.73° C

The frequency of an open orang pipe is estimated by using the formula:

[tex]\mathbf{f = \dfrac{v}{2L}}[/tex]

Then, the combination of the frequency of the tuning fork and the open orang pipe is:

[tex]\mathbf{254 - \dfrac{v}{2L} }[/tex]

These combinations of frequency produce 4 beats per sound.

i.e.

[tex]\mathbf{254 - \dfrac{v}{2L} =4}[/tex]

[tex]\mathbf{ \dfrac{v}{2L} = 254-4 }[/tex]

[tex]\mathbf{ \dfrac{v}{2L} = 250 ----(1)}[/tex]

When it is altered, the beats first diminish and increase again by 4.

i.e.

[tex]\mathbf{ \dfrac{v'}{2L} = 254+4 }[/tex]

[tex]\mathbf{ \dfrac{v'}{2L} = 258 --- (2) }[/tex]

If we equate both equations (1) and (2) together, we have:

[tex]\mathbf{\dfrac{v'}{v}= \dfrac{258}{250}}[/tex]

However, from our previous knowledge, we understand that the velocity of an object varies directly proportional to the square root of its temperature.

Hence;

when the temperature of the pipe  = unknown ???the temperature of the open orang pipe = 15

[tex]\implies \mathbf{\sqrt{\Big(\dfrac{273 + T}{273 + 15}\Big)}= \dfrac{258}{250}}[/tex]

By squaring both sides, we have:

[tex]\implies \mathbf{\Big(\dfrac{273 + T}{273 + 15}\Big)}= \Big (\dfrac{258}{250}\Big )^2}[/tex]

[tex]\implies \mathbf{\Big(\dfrac{273 + T}{273 + 15}\Big)= \Big (\dfrac{66564}{62500}\Big )}[/tex]

[tex]\implies \mathbf{\Big(\dfrac{273 + T}{288}\Big)= \Big (1.065024\Big )}[/tex]

[tex]\implies \mathbf{273 +T =306.726912 }[/tex]

T = 306.726912 - 273

T ≅ 33.73 ° C

The change in temperature ΔT = 33.73° C - 15° C

The change in temperature ΔT = 18.73° C

Learn more about wave frequency here:

https://brainly.com/question/14316711?referrer=searchResults

What is 1 radian approximately in degrees?

Answers

Answer:

180 LUV:)

Explanation:

A pumpkin is launched in the air and travels at a horizontal velocity of 25 meters per second for 5 seconds. How far does it travel horizontally?

Answers

Answer:

30.3 meters, 172 degrees

Explanation:

To insure the most accurate solution, this problem is best solved using a calculator and trigonometric principles. The first step is to determine the sum of all the horizontal (east-west) displacements and the sum of all the vertical (north-south) displacements.

Horizontal: 2.0 meters, West + 31.0 meters, West + 3.0 meters, East = 30.0 meters, West

Vertical: 12.0 meters, North + 8.0 meters, South = 4.0 meters, North

The series of five displacements is equivalent to two displacements of 30 meters, West and 4 meters, North. The resultant of these two displacements can be found using the Pythagorean theorem (for the magnitude) and the tangent function (for the direction). A non-scaled sketch is useful for visualizing the situation.

Applying the Pythagorean theorem leads to the magnitude of the resultant (R).

R2 = (30.0 m)2 + (4.0 m)2 = 916 m2

R = Sqrt(916 m2)

R = 30.3 meters

The angle theta in the diagram above can be found using the tangent function.

tangent(theta) = opposite/adjacent = (4.0 m) / (30.0 m)

tangent(theta) = 0.1333

theta = invtan(0.1333)

theta = 7.59 degrees

This angle theta is the angle between west and the resultant. Directions of vectors are expressed as the counterclockwise angle of rotation relative to east. So the direction is 7.59 degrees short of 180 degrees. That is, the direction is ~172 degrees.

What is friction ??? ​

Answers

Answer:

Frictional force is produced when two bodies are rubbed against each other. It is the force that oppose the motion and therefore it stops or slow down a moving body.It depends upon the roughness or smoothness of the surface of the body in contact.Rough surface have more friction that the smooth surface. Similarly, the heavier body produces more friction than a lighter body. Frictional force acts in the opposite direction of the motion of the body.

Heat is transferred from molecules with more kinetic energy to molecules with _________kinetic energy.

Answers

Answer:

less

Explanation:

heat travels from hotter to colder object. hotter object has more kinetic energy.

what is the specific latent heat of fusion of water?

Answers

Answer:

334

Explanation:

The speed of light inside a medium is (2.0 x 10^8m/s) What is the index of refraction (n) of the medium?

Answers

Answer:

Refractive index of a medium = Speed of light in vacuum/Speed of light in a medium

1.5 = 3 x 108 / Speed of light in medium

Speed of light in the medium = 3 x 108 /1.5

= 2 x 108 m/s.

Explanation:

This drawing of the field lines between these two charged plates is correct.

True or false

Answers

Answer:

True

Explanation:

Since positive and negative forces are both opposites of each other they attract. But if the forces are the same where both are positive or negative thye repel do to being the same charges in that case the picture would show lines moving in opposite directions.

Be able to list the three compounds that are formed as products of highly exothermic
reactions such as detonating nitrogen-based explosives?

Answers

Answer:

Ammonium perchlorate NH4ClO4

Ammonium Nitrate

Calcium Cyanamide

When detonated, the reaction products are all gases, such as water vapor, nitrogen gas, and oxides of nitrogen.

Hopefully this helps :)

Which light is most sensitive to the eyes?

Answers

Answer:

Our eyes are most sensitive to the wavelengths corresponding to the yellow and green colors of the spectrum. Flashy signs and some fire engines are painted in a yellowish-green color to attract our attention.


I will mark brainlist

If a wave’s amplitude is 2cm, then its height is equal to:



5 cm.



0 cm



4 cm.



2 cm

Answers

Answer:

4 cm

Explanation:

Amplitude is the measure from the MIDLINE to the peak of the wave....so the wave HEIGHT is twice the ampltude

2 x 2 cm = 4 cm

What is the effect of erosion?

A. New land forms at the mouth of a river.
B. New land forms at the top of a mountain.
C. A mountain forms.
D. A fossil is created.

Answers

The answer is A new land forms at the mouth of a river

Using the expression for the total energy of this system, it is possible to show that after the switch is closed, d2qdt2=−kq, where k is a constant. Find the value of the constant k.

Answers

The value of the constant K is [tex]\mathbf{K = \dfrac{1}{LC}}[/tex]

According to Kirchhoff's loop rule, the total algebraic sum of potential differences in any loop, combining voltage provided by voltage sources as well as resistive components, must equal zero.

Thus, the relation for Kirchhoff's loop rule can be expressed as:

[tex]\mathbf{\dfrac{q}{c}- L\dfrac{dI}{dt} = 0}[/tex]

We all know that the current in the nonconstant charge flow can be written as:

[tex]\mathbf{I = \dfrac{dq}{dt}}[/tex]

Replacing the current (I) into Kirchhoff's loop rule, we have:

[tex]\mathbf{ L\dfrac{d}{dt} ( \dfrac{dq}{dt})= -\dfrac{q}{c}}[/tex]

[tex]\mathbf{ \dfrac{d^2q}{dt^2}= -\dfrac{q}{Lc} \ \ ---(1)}[/tex]

From the given question, when the switch is closed

[tex]\mathbf{ \dfrac{d^2q}{dt^2}= -kq\ \ ---(2)}[/tex]

Then, the charges on the capacitor start to b, resulting in the rise of the current in the circuit.

By equating both equations (1) and (2);

[tex]\mathbf{K = \dfrac{1}{LC}}[/tex]

Learn more about Kirchhoff's loop rule here:

https://brainly.com/question/14681219?referrer=searchResults

What is the volume of 150g of a substance that has a density of 150g of a substance that has a density of 11.3g/cm3

Answers

Answer:

25.0 cm3

Explanation:

The volume is 25.0 cm3 .

20 cm long 10 cm wide and 5 cm thick as a mass of 500 g determine the greatest pressure that can be exerted by block on the flat surface?​

Answers

100000 Pascal

Explanation:

pressure= force/area

Max pressure= force/min area

so f=5

min area= 5×10^-5

5÷5*10^-5 = 100000pascal

i’m confused on this worksheet can someone help

Answers

Answer:

well for C the horse is at rest at 10 to 15

D is 0 to 10

E is 15 to 25

Explanation:

If you search up examples it will help with this worksheet.

If I am work then I appologize

Which event provides evidence that matter can reflect waves?
A. A dog's bark is barely heard through double-pane windows.
B. A bat finds a moth using echolocation.
C. A whale's song is heard hundreds of miles away,
D. A fish appears to be farther from a boat than it is.

Answers

Answer:

B. A bat finds a moth using echolocation

Explanation:

100% i just took that test today

The passage of a wave through a medium is...?

Answers

Answer:

Transmission

Explanation:

It’s the passage of electromagnetic waves through a medium.

The passage of a wave through a medium is known as transmission.

What is the transmission of a wave?

The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.

Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).

Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.

Therefore, the passage of a wave through a medium is known as transmission.

To learn more about the Transmission of the wave, refer to the link:

https://brainly.com/question/27844842

#SPJ6

 A wooden box with a mass of 10.0 kg rest on a ramp that is incline at an angle of 25° to the horizontal. A rope attached to the box runs parallel to the ramp and then passes over a frictionless bully. A bucket with a mass of M hangs at the end of the rope. The coefficient of static friction between the ramp in the box is 0.50. The coefficient of Connecticut friction between the ramp in the box is 0.35.

Suppose the box remains at rest relative to the ramp. What is the maximum magnitude of the friction force exerted on the box by the ramp?

Answers

The maximum magnitude of the friction force exerted on the box by the ramp is 44.41 N.

The given parameters;

Mass of the box, m = 10 kgInclination of the ramp, θ = 25⁰Coefficient of static friction, μ = 0.5 Coefficient of kinetic friction, μk = 0.35

The normal force on the wooden box is calculated as follows;

[tex]F_n = mg \times cos(\theta)\\\\F_n = 10 \times 9.8 \times cos(25)\\\\F_n = 88.8 2 \ N[/tex]

The maximum magnitude of the friction force exerted on the box by the ramp is calculated as follows;

[tex]F_f = \mu \times F_n\\\\F_f = 0.5 \times 88.82 \\\\F_f = 44.41 \ N[/tex]

Learn more about static frictional forces here: https://brainly.com/question/4515354

What is Motion ????? ​

Answers

Answer:

the action or process of moving or being moved.

Explanation:

which an object changes its position over time

10. What is Newton's 3rd Law?
O A. For every action there is an equal and opposite reaction.
B. Acceleration depends on two variables, the mass of the object and the amount of
force.
C. An object at rest will stay at rest, an object in motion will stay in motion, unless an
unbalanced force acts upon it.
D. The amount of matter in an object.
7. What is Newton's 2nd Law? *

Answers

Answer:

A. For every action there is an equal and opposite reaction.

Newton’s 3rd law is A. For every action there is an equal and opposite reaction.

Newton’s 2nd law is B. Acceleration depends on two variables, the mass of the object and the amount of force. (Acceleration = force/mass)

There are 270 students and teachers going on a field trip to a science center. If each school bus holds 54 people, how many buses are needed?

Answers

5 buses!
270/54 is five:)

Light bulbs produce useful energy in the form of light and waste energy in the form of heat. What kind of light bulb would you use
to incubate eggs?

A. low-efficiency light bulbs, because they produce more light

B. low-efficiency light bulbs, because they produce more heat

C. high-efficiency light bulbs, because they produce more heat

D. high-efficiency light bulbs, because they produce more light

Answers

Answer:

C) high efficiency light bulbs, because they produce more heat

Light bulbs produce useful energy in the form of light and waste energy in the form of heat, the kind of light bulb would you use to incubate eggs are low-efficiency light bulbs, because they produce more heat, therefore the correct answer is option B.

What is thermal energy?

It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.

The type of light bulb you would use to incubate eggs is a low-efficiency light bulb since they produce more heat; consequently, option B is the right response. Light bulbs produce useful energy in the form of light and waste energy in the form of heat.

To learn more about thermal energy here, refer to the link given below ;

brainly.com/question/3022807

#SPJ2

the push up is dynamic or static​

Answers

Answer:

Dynamic exercises

Explanation:

We have seen in earlier readings how to determine the speed of a wave on a string. What will happen to the wavelength of a sinusoidal wave on a string if the tension in the string is increased (assuming we keep the frequency of the wave the same)

Answers

This question involves the concepts of tension in a string and the wavelength of the wave in a string.

The wavelength of a sinusoidal wave will "increase by square power" on a string if the tension in the string is increased when the frequency is kept constant.

The speed of a wave on a string is given by the following formula:

[tex]v=\sqrt{\frac{T}{\mu}}[/tex]

where,

v = speed of wave = fλ

f = frequency of the wave

λ = wavelength of the wave

T = tension force

μ = linear mass density of the string

Therefore,

[tex]f\lambda=\sqrt{\frac{T}{\mu}}\\\\T = f^2\lambda^2\mu[/tex]

It is given that the frequency is kept constant. The linear mass density is also constant for a string. Therefore,

[tex]T=(constant)\lambda^2\\T\ \alpha\ \lambda^2[/tex]

Learn more about string tension here:

https://brainly.com/question/4087119?referrer=searchResults

PLZ HELPPPP!!

this question is about popping microwave popcorn:

If you turn the microwave on for two minutes, is the rate of popping always the same, or does it change? Explain.

Answers

No,the poping of microvave is not same there time is different

In an oscillating LC circuit, when 81.0% of the total energy is stored in the inductor's magnetic field, (a) what multiple of the maximum charge is on the capacitor and (b) what multiple of the maximum current is in the inductor

Answers

Answer:

21

Explanation:

9+10=21

cuantos metros hay en 100cm?

Answers

Answer: 100cm = 1 meter.

Centi is 100, therefor meaning that 100cm is exactly 1 meter.

I hope this helps!

An electron is held up against the force of gravity by the attraction of a fixed proton some distance above it. How far above the electron is the proton

Answers

5.08 m

Explanation:

The weight of the electron is being counteracted by the attractive electrostatic force exerted by the proton above it. We can write the force equation as follows:

[tex]m_eg = k_e\dfrac{Q_pQ_e}{r^2}[/tex]

where the Q's are the charges of the proton and electron, r is the distance between the particles, g is the acceleration due to gravity, [tex]m_e[/tex] is the mass of the electrons and [tex]k_e[/tex] is the Coulomb constant. So solving for r, we get

[tex]r^2 = k_e\dfrac{Q_pQ_e}{m_eg}[/tex]

Taking the square root of r^2, we then get the distance as

[tex]r = \sqrt{k_e\dfrac{Q_pQ_e}{m_eg}}[/tex]

The values are given as follows:

[tex]m_e = 9.11×10^{-31}\:\text{kg}[/tex]

[tex]g = 9.8\:\text{m/s}^2[/tex]

[tex]Q_p = Q_e = 1.60×10^{-19}\:\text{C}[/tex]

[tex]k_e = 8.99×10^9\:\text{N-m}^2\text{/C}^2[/tex]

Putting in all of these values in our equation for r,

[tex]r = \sqrt{\dfrac{(8.99×10^9\:\text{N-m}^2\text{/C}^2)(1.60×10^{-19}\:\text{C})^2}{(9.11×10^{-31}\:\text{kg})(9.8\:\text{m/s}^2)}}[/tex]

[tex]\:\:\:\:\:= 5.08\:\text{m}[/tex]

Ignoring any effects of dc resistance, what is the total reactance of a 250 mH coil in series with a 4.7 microfarad capacitor at a signal frequency of 60 Hz

Answers

The total reactance of the inductor and the capacitor is 470.1 ohms.

The given parameters;

inductance of the coil, L = 250 mHcapacitance, C = 4.7 μfrequency of the circuit, f = 60 Hz

The inductive reactance of the coil is calculated as follows;

[tex]X_l = \omega L\\\\X_l = 2\pi f L\\\\X_l = 2\pi \times 60 \times 250 \times 10^{-3}\\\\X_l = 94.26 \ ohms[/tex]

The capacitive reactance of the capacitor is calculated as follows;

[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{2\pi f C} \\\\X_c = \frac{1}{2\pi \times 60 \times 4.7 \times 10^{-6}} \\\\X_c = 564.31 \ ohms[/tex]

The impedance of the circuit is calculated as follows;

[tex]Z = \sqrt{(X_c - X_l)^2} \\\\Z = X_c - X_l\\\\Z = 564.31 - 94.26\\\\Z = 470.1 \ ohms[/tex]

Thus, the total reactance of the inductor and the capacitor is 470.1 ohms.

Learn more here:https://brainly.com/question/10886711

Other Questions
Write a program that lists all ways people can line up for a photo (all permutations of a list of strings). The program will read a list of one word names (until -1), and use a recursive method to create and output all possible orderings of those names separated by a comma, one ordering per line. Find the equations of a line through these 2 points(1,2) & (3,5)2. (-2,0) & (0,8)3. (4,-5) & (11,-5)4. (6,2) & (9,3)6. (6,2) & (10,3)5. (7,5) & (6,11) The conjugate of (2+i)/3+i, in the form of a+ib, is13/2 + i(25/2)13/10 + i(-15/2)13/10 +(-9/10)13/10+(9/10) .The implications of medicine to the healthcare system and industry, a police finds skid marks 60m long on a highway showing where a car made an emergency stop. assuming that the acceleration was -10m/s2. how fast was the car going and did it exceed the sooed limit of 80km/h? What is the difference between nightmares and recurringnightmares? If x=5 and y=3 find the value of x+2y write 5 3/5 improper fraction what is the answer to this easy problem? POINT GIVEAWAY Help pls due tonight 1. Find the slope of the line that passes throughthe points (6, 13) and (-3, 7). What is the length of CD, given that figure ABCD is a rectangle?B1310ADO A. 26O B. 10O C. 13O D. 20 When waves are closer together and there are more waves, then the wave has a higher ____________. Solve the given problem using Venn Diagram. Show your solution A group of 50 students went on a tour in Palawan province Out of 50 students, 24 joined the trip to Coron; 18 went to Tubbataha Reef, 20 visited El Nido: 12 made a trip to Coron and Tubbataha Reef 15 saw the Tubbataha Reef and El Nido, 11 made a trip to Coron and El Nido: 10 saw the three tourist spots. 1. How many students went to Coron only? 2. How many students went to Tubbataha Reef only? 3. How many joined the El Nido trip only? 4. How many did not go to any of the tourist spot?(Please kindly help me. I have answered this problem, but it seems not to be correct.) What is the value of x in the triangle? Qu tiene mas valor obligatorio la ley o la costumbre? please help asap!!!!!!! PLEASE HELPThe image shows locations of fossils from different geologic periods in Virginia.Geologic Map of Virginia. Key includes the following: quaternary, Tertiary, Cretaceous, Triassic, Pennsylvanian, Mississippian-Devonian, Silurian-Ordovician, Cambrian, Precambrian, Granite and Gniess, Metamorphic Rocks and Igneous Intrusives.Which association correctly links the time period with the location of the fossils?Pennsylvanian to eastern and western Virginia Cambrian to throughout southern VirginiaTertiary to eastern VirginiaQuaternary to eastern and western Virginia 7th grade math please help Solve the system.y-x=4x+y=6