Answer:
Option 4 (The field energy will increase) is the right response.
Explanation:
Whereas the power kept secure in either an attribute has been collected, the artifact would be decided to push throughout the straight line that induces the electrostatic repulsion to greatly reduce. This same power generated will indeed be significantly decreased as well as supplanted by the power generation of the motion. Sometimes when magnetic poles figure together including poles, this same energy rendered inaccessible would then greatly reduce if those who keep moving off from each other. So our policy requires that perhaps the magnets would be tried to push throughout a position that reduces the energy consumed. That is, they're being allowed to force apart.All those other alternative solutions aren't closely linked to the example in question. Therefore the choice above is the right one.
If Jerome is swinging on a rope and transferring energy from gravitational potential energy to kinetic energy, what is being done? compression work radiation energy creation
Answer: work
Explanation:
When Jerome swings on a rope and hence this leads to the transfer of energy from the gravitational potential energy to a kinetic energy, this implies that work is being done.
For work to be done, it simply means that one has to transfer energy from one particular form to another form. In this case, the energy was transferred from the gravitational potential energy to a kinetic energy.
Answer:
work
Explanation:
what are 3 physical changes of plastic
Answer:
1. Size
2. Shape
3. Color
Explanation:
Sorry if this is no help
Temperature
Energy Input
The three states of matter are modeled in the heatind cu
curve seen here. Identify ALL of the changes that must take place for a
substance to change state, from a solid to a gas.
A)
Pressure increases
B)
Temperature increases
19
7
Particles spread apart
D)
Kinetic energy increases
E)
Particle motion increases
Answer:
Particles spread apart, temperatue increases, pressure increases
Explanation:
Select ALL of the places you might find DNA evidence.
saliva on gum
blood spatter on the wall
inside a femur bone found in the woods
cells on root of hair found at the scene
Answer:
Inside a femur bone found in the woods,
saliva of gum
A car starts from rest and accelerates at a constant rate of 3.5 m/s2. What is the car’s velocity after the car has traveled 800 m?
Answer:
Attached is the answer
Explanation:
The car’s velocity after the car has traveled 800 m is 74.83 m/sec.
What is velocity?When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time.
Using equation of motion, initial velocity u = 0 and acceleration a = 3.5 unit and distance travelled is 800 m.
v² = u² + 2as
v² = 0 + 2*3.5*800
v² = 5600
v = 74.83 m/sec
The car’s velocity after the car has traveled 800 m is 74.83 m/sec.
To learn more about velocity refer to the link
brainly.com/question/18084516
#SPJ2
Calculate speed...
D=40 m
T=10 s
a
40 m/s
b
400 m/s
c
4 m/s
Answer:
c
Explanation:
speed=distance÷time
40÷10=4
Please help me answer this i really need help!!!
A body moving in simple harmonic motion has an amplitude of 10cm and a frequency of 100Hz. Find i.mthe period of oscillation, ii. the acceleration at the maximum displacement, iii. the velocity at the centre of motion
Explanation:
= 5 cm = 0.05 m
T = 0.2 s
ω=2π/T=2π/0.2=10πrad/s
When displacement is y, then acceleration, a=−ω2y
Velocity, V=ωr2−y2
Case (a) When y=5cm=0.05m
a=−(10π)2×0.05=−5π2m/s2
V=10π×(0.05)2−(0.05)2=0
Case (b) When y=3cm=0.03m
a=−(10π)2×0.03=−3π2m/s2
V=10π×(0.05)2−(0.03)2=10π×0.04=0.4π m/s
Case (c) When y=0
a=−(10π)2×0=0
V=10π×(0.05)2−02=
hope it helps. pls follow and mark as brainliest
the mass of the car is 1400 kg. The car , initially at rest is moved along a level road by a resultant force of 3500N.The car reaches speed of 30m/s ... calculate the average acceleration and use newtons seconds law , F=m×a
Answer:
2.5m/s²
Explanation:
Given parameters:
Mass of car = 1400kg
Resultant force = 3500N
Speed = 30m/s
Unknown:
Average acceleration = ?
Solution:
According to the Newton's second law of motion:
Force = mass x acceleration
Now;
3500 = 1400 x acceleration
Acceleration = [tex]\frac{3500}{1400}[/tex] = 2.5m/s²
A patient arrives at an emergency room complaining of pain in her ankle. The nurse examines the patient’s ankle, looking for skin discoloration or swelling. The nurse is relying mostly on his knowledge of
Answer:
Superficial anatomy.
Explanation:
Superficial anatomy can be defined as the physical examination of the external parts of a living organism such as ankle, nose, skin, knee, toes, fingers, cornea etc.
Hence, superficial anatomy is also popularly referred to as surface anatomy.
In this scenario, a patient arrives at an emergency room complaining of pain in her ankle. The nurse examines the patient’s ankle, looking for skin discoloration or swelling. The nurse is relying mostly on his knowledge of superficial anatomy by studying or examining the patient's ankle for any sign of decoration or swelling on the skin.
1. A person riding a bicycle on level ground reaches a velocity of 13.4 m/s before
stopping. While braking, the internal energy of the brakes, wheels, and road
increase by 5836 J. What is the mass of the cyclist?
A 30 kg dog runs at a speed of 15
What is the dog's kinetic energy?
Advantages of wave model
Explanation:
plzz if it helps you then plzz mark me brainliest
Please help for 30 points
write at least 3 rules that summarize how magnets move objects.
Answer:
Magnets work by using Earth's magnetic pull.
Explanation:
Magnets move objects because they are made of steel or metal. And for that reason, they can stick to objects that are metal.
WILL MARK BRAINLIST!!! only for correct answer
NEED CORRECT ANSWER ASAPPP
Answer:
number 4
Explanation:
The reflection of light happens when the light bounces off the reflecting surface. That is described by the last (bottom) schematics.
Therefore, select answer number 4.
A wave has frequency of 50 Hz and a wavelength of 10 m. What is the speed of the wave? Group of answer choices
Explanation:
hehshehebdbajahwwdszsjshshs shsbw
An object moving at a constant velocity accelerates at a constant rate of 2.5 m/s2 for a distance of 30 m. At the end of the acceleration the object has a velocity of 90 m/s. What was its velocity before accelerating?
Answer:
The initial velocity is 89.16m/s
Attached is the solution
Explanation:
if an object is projected upwards with an angle 30 to the horizontal and its initial velocity is 20 m/s, its maximum height= ? ( consider g= 10m/s^2 )
Answer:
[tex]h_m=5 \ m[/tex]
Explanation:
Projectile Motion
It's the type of motion that experiences an object projected near the Earth's surface and moves along a curved path under the action of gravity.
The maximum height hm is reached when the vertical component of the velocity is 0. It can be calculated as follows:
[tex]\displaystyle h_m=\frac{v_o^2\cdot \sin^2\theta}{2g}[/tex]
Where:
vo = initial speed of the object
θ = initial launch angle
g = acceleration of gravity ([tex]10\ m/s^2[/tex])
The object is projected with an angle of θ=30° and an initial speed of vo=20 m/s. The maximum height is:
[tex]\displaystyle h_m=\frac{20^2\cdot \sin^2 30^\circ}{2*10}[/tex]
[tex]\displaystyle h_m=\frac{400\cdot 0.5^2}{20}[/tex]
[tex]\boxed{h_m=5 \ m}[/tex]
An electromagnetic wave is composed of electrical and magnetic energy.
Please select the best answer from the choices provided
T
F
Answer:
the answer is T!!
!!!!!!!!
Answer:
true
Explanation:
hope this helps
Does someone have hamster name recommendation (girl hamster)
Explanation:
Lola
Or Jasmine
Or lucy
Or Nightingale
Or Sugarcane
Or Polly
Or Heather
Some names I like!
Find the work done by a man who is pulling a box of 45kg of mass by means of rope which makes angle of 45 degrees.
Answer:
0
Explanation:
Since no distance is given, the force is not doing any work
No work is done by the man since we do not know the distance or displacement.
Work is only said to be done when the force applied on an object moves it through a particular distance.
Work done = Force x distance.
Since no distance is given in this problem, we can as well assume that the force applied is doing no work on the object.
Please help i don't get it.
Which image matches the Topographic Map Shown?
Also, please explain how your answer is the correct answer. Why is your answer correct?
Answer:
the answer is 4
Explanation:
the picture matches eachother that's why I picked 4
Answer:
devils tower
Explanation:
on the topographic map the circular lines stop at at certain point because the moutain doesnt get any pointyer if you know what that means
in other words if the map continued with the circular lines all the way to the centerit would have been that snowny mountain
9ma electric current is flowing through a conducting wire , then the number of electron passing through it in 3 min is
Answer:
1.0125 x 10^19
Explanation:
current flowing through conductive wire= 9mA = 9 x 10^ -3 A
charge passing per 3 min
Q = It
= 9 x 10^ -3 x (3 x 60)
= 1.620 C
no of electrons in charge
Q = ne
1.620 = n x 1.6 x 10 ^ -19
n. = 1.0125 x 10 ^19
Can anyone help me with these questions? TIA!!
Resistance is a material's tendency to resist the flow of charge (current). Resistance is the measure of the opposition to motion of free electrons(current) due to their continuous collisions with the atom of the lattice. An electric current flows when electrons move through a conductor, such as a metal wire. The moving electrons can collide with the atoms in the metal. This makes it more difficult for the current to flow, and causes resistance. The unit of Resistance is "OHM". Ohm is denoted by the greek letter "Ω".
_____________________________________Question 2:[tex]\Huge\text{Ohm's Law}[/tex]If a current 'I' is caused to flow in a conductor by a battery of potential difference 'V', it is found that the current is directly proportional to potential difference provided there is no change in the conductor itself. That means more will be I if we increase V. So
[tex]{\Longrightarrow}\qquad \qquad \qquad I {\propto} V\\\\{\Longrightarrow}\qquad \qquad \qquad I = KV[/tex]
Where K is Conductance. Conductance is the ability of a conductor to allow the current to pass through it. Resistance(R) is the reciprocal(opposite) of conductance(K) thus K is inversely proportional to R,
[tex]{\Longrightarrow}\qquad \qquad \qquad I = \frac{1}{R}V \\\\{\Longrightarrow}\qquad \qquad \qquad V = IR[/tex]
This is known as OHM's Law, and V = IR is the equation linking the R, V and I.
_____________________________________Question 3:[tex]\Huge\text{Circuit Diagram:}[/tex]
Circuit Diagram no 1 attached is of this question. In the circuit diagram, V is voltmeter to find the potential difference, A is the ammeter to find the current, R is the resistance i.e. the conductor wire, The switch and the battery.
Suppose the wire of length 100 cm is connected to a battery, the Voltmeter observes the potential difference and ammeter reads the current of the wire. We will use the R, V and I i.e. V = IR equation to find out the resistance of that wire and Record the resistance. Then attach another small wire of suppose 90 cm to the battery, and similarly Find out its resistance too. After recording the resistance 3 or 4 times, you will observe that When you decrease the length of the wire,
The Resistance decreasesThe Current increases The Potential Difference decreases_____________________________________Question 4:[tex]\Huge\text{Resistance:}[/tex]The resistance of a conductor depends upon the following factors.
Length(L), Longer the length of conductor, Greater the resistance.[tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad L[/tex]
Cross-Sectional Area(A), thicker the Wire, lesser the Resistance.[tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad \frac{1}{A}[/tex]
Material of the Conductor, The Resistance also changes because of the material of the wire. If we use copper it will have different resistance than the steel wire.The relation between only length of the wire and resistance is [tex]R\quad {\propto} \quad L[/tex] . The relation of R, L and A is given by, ρ
[tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad \frac{L}{A}\\\\{\Longrightarrow}\qquad \qquad \qquad R\quad =\ \frac{\ {\rho}\ L\ }{A}[/tex]
Where ρ is known as resistivity depends upon the nature of the material of the wire. The meter of resistivity is Ω x m(Ohm x meter).
_____________________________________Question 5:[tex]\Huge\text{I-V Characteristic:}[/tex]
I-V curves of an electrical device or component, are a set of graphical curves which are used to define its operation within an electrical circuit. I-V characteristic curves show the relationship between the current flowing through an electronic device and the applied voltage across its terminals. The circuit diagram to find I-V characteristic must have a resistor which is a device or component connected to a battery which is providing the potential difference V. When a resistor is connected to a battery, current I is observed due to drift velocity. To find the current and potential difference(voltage) the circuit must have the Ammeter and voltmeter. Recorded current and voltage must be used to plot the graph to check the I-V characteristic. The picture attached is the circuit diagram.
_____________________________________Question 6:We calculate the resistance at constant temperature by ohm's law. The Ohms law is applied at constant temperature because the resistance of any material varies with the change in temperature. It shows a linear relationship between the applied voltage and the resulting current, resistance being a constant. So we could use V = IR because resistance is constant at constant temperature.
_____________________________________Best Regards,'Borz'
What can always be said about a negatively-charged ion?
A negatively-charged ion always has more neutrons than protons
A negatively-charged ion always has more electrons than protons
A negatively-charged ion always has more protons than electrons
A negatively-charged ion always has more protons than neutrons
Answer: A negatively-charged ion always has more electrons than protons
Explanation:
First, we know that the elementary negative charge is the electron, while the positive one is the proton. Such that both have the same charge in magnitude, but a different sign. Such that if we have the same number of electrons and protons in an atom, the charge of this atom will be neutral.
And an ion is an atom with a different number of electrons and protons, so the charge of the atom is not neutral.
Then if we have a negatively-charged ion, the charge of this atom is negative. Then we must have a larger number of electrons (the negative ones) than protons (the positive ones)
Then the correct option is:
A negatively-charged ion always has more electrons than protons
4. A toy car travels 60 m during 5.7 s at a constant speed. What is the speed of the toy car?
15.556
13.526
6.116
10.526
None of these is correct.
Answer: 10.526m/s
Explanation:
The speed of the toy car would be calculated as the distance travelled by the toy card divided by the time taken. This will be:
= Distance travelled / Time taken
= 60/5.7
= 10.526m/s
The speed of the toy car is 10.526 meters per second.
1) Which of the following is not a type of energy?
A: Thermal
B: Potential
C: Kinetic
D: Frictional
Two billiard balls of equal mass collide. Ball 1 is initially moving at 0.43 m/s to the left, and ball 2 is initially at rest. Which of the following sets of final velocities does not describe an inelastic collision between the balls?
A. Ball 1 at 0.12 m/s left, Ball 2 at 0.31 m/s left
B. Ball 1 at 0.21 m/s left, Ball 2 at 0.22 m/s left
C. Ball 1 at 0.10 m/s left, ball 2 at 0.33 m/s left
D. Ball 1 at rest, ball 2 at 0.43 m/s left
Answer: B
"Ball 1 at 0.21 m/s left, Ball 2 at 0.22 m/s left"
(b)Suggest with reasons,what must be added to the flask to keep the liquid hot.
____________________________________________________
(a) a thin layer of vacuum is provided between the two walls of flask, to minimise the heat loss by conduction , because for conduction medium (molecules) is required , but now medium is absent .
.(b) the two walls are silvered to minimise the heat loss by radiation , because a shiny surface is a bad absorber and bad emitter of radiation i.e. good reflector of heat , so prevents the heat exchange between content of flask and surrounding .
(c) the lid of flask is provided with a tight cork stopper to minimise the heat loss by convection , so that convection currents cannot go out .
(d) a plastic (or metal) case is provided with a flask , to protect the flask from physical damage
hope it helps! please mark me brainliest
thank you! have a good day ahead
if u follow me, I will follow u back!
How does attachment affect exploration? Be sure to include findings from both Harlow and Ainsworth in your response.
Answer:
Attachment can affect many things. When you go back to the experiment, you see that they are testing 4 monkeys. They want to see if they would go to the cloth mother or the wire mother. But that is just the base of the experiment. Once the monkeys pick the mother, they have attached themselves to the mother, because animals will pick what is mother, because once you are born, the "hunger games" begin in the wild. They will stay by their mother's side until they are grown and ready to go on their own. When you think about this whole experiment, you know that this experiment was designed as a test of the relative importance of contact comfort. They could have picked any animal for this, and the outcome would have been very similar because as a baby you need to find things that you trust and that is your mother.
Explanation:
