The drawing shows the couple acting on a tire wrench is missing and so i have attached it.
We are to find an expression for the torque when the axis is perpendicular to the tire and passes through the points A, B & C
Answer:
Point A: τ = Fl
Point B: τ = 0
Point C: - Fl
Explanation:
Formula for torque is;
τ = F × d
Where;
F is perpendicular force
d is distance.
Thus;
> At point A, it means we are taking torque about point A and so we have;
τ = (-F × 0) + (F × L)
τ = Fl
> At point B, it means we are taking torque about point B and so we have;
τ = (-F × L/2) + (F × L/2)
τ = -(FL/2) + (FL/2)
τ = 0
> At point C, it means we are taking torque about point C and so we have;
τ = (-F × L) + (F × 0)
τ = -FL
The decrease in the intensity of light over distance, such as with increasing depth in water, is known as ______.
Answer:
Attenuation
Step By step Explanation:
The decrease in the intensity of light over distance, such as with increasing depth in water, is known as ______.
It is called attenuation.
The decraese in the amplitude of the signals is called attenuation.
Ehy Newton's law of gravitation also called universal law?
Answer:
Gravity is a natural phenomenon that causes all massive objects to attract each other. The magnitude or force of this interaction depends on the masses and distance of the bodies. This causes objects to fall toward Earth, for example, and keep satellites and celestial bodies in their orbits, such as the Earth's orbit around the Sun. Gravity also causes the tidal phenomenon.
In physics, gravity can be approximated by Isaac Newton's laws of gravity. Although the accuracy of the law is sufficient, for example, when calculating the orbits of spacecraft, gravity is best described by Albert Einstein’s general theory of relativity, in which it is considered the curvature of space-time.
Calculate surface tension of an enlarged radius of 4cm to 6cm and amount of work necessary for enlargement was 1.5×10^-4 joules
Answer:
[tex]T=7.5*10^{-5}[/tex]
Explanation:
From the question we are told that:
Radius [tex]r=2cm[/tex]
Work done [tex]W=1.5×10^-4 joules[/tex]
Generally the equation for Work done is mathematically given by
[tex]W=T.dA[/tex]
Therefore
[tex]T=\frac{W}{dr}[/tex]
[tex]T=\frac{1.5*10^{-4}}{2}[/tex]
[tex]T=7.5*10^{-5}[/tex]
5- Clasifica los siguientes cambios de la materia, anotando delante de cada uno cambio físico (F) o cambio químico (Q): • Disolver azúcar en agua • Freir una chuleta • Arrugar un papel • El proceso de la digestión • Secar la ropa al sol • Congelar una paleta de agua • Hacer un avión de papel • Oxidación del cobre • Romper un lápiz • Prender fuegos artificiales • Excavar un hoyo • Quemar basura
Answer:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
Explanation:
A continuación, veremos que representa cada caso:
1) Disolver azúcar en agua - Cambio químico - Es un caso de una solución en donde el solvente es el azúcar y el soluto es el agua.
2) Freir una chuleta - Cambio físico - Es un proceso de cocinado por un transferencia de calor y transferencia de masa.
3) Arrugar un papel - Cambio físico - Se aplica fuerzas externas para deformar el papel.
4) El proceso de la digestión - Cambio químico - Reducción de los alimentos a desechos y la absorción de nutrientes por el contacto con jugos gástricos o ambientes intestinales.
5) Secar la ropa al sol - Cambio físico - El secado es un fenómeno de transferencia de masa.
6) Congelar una paleta de agua - Cambio físico - Cambio del estado líquido al estado sólido por transferencia de calor.
7) Hacer un avión de papel - Cambio físico - Aplicación de fuerzas externas para plegar y doblar la hoja de papel.
8) Oxidación del cobre - Cambio químico - Proceso de corrosión por contacto con iones que se transportan en el ambiente.
9) Romper un lápiz - Cambio físico - Proceso de ruptura por esfuerzo normal a causa de un momento como consecuencia de una fuerza externa aplicada sobre el lápiz.
10) Prender fuegos artificiales - Cambio químico - Reacción química de reducción-oxidación.
11) Excavar un hoyo - Cambio físico - Remoción de tierra por trabajo físico.
12) Quemar basura - Cambio químico - Reacción de combustión.
A particle is moving on a circular path of radius R. What will be its displacement and distance covered after 3 ½ round?
(please help fast)
Answer:
2r or diameter
Explanation:
After 3 1/2 rounds it will end up on the other side of the circle and displacement will be 2 x the radius = d
Distance = 7 π R
Displacement = 2 R from the starting point directed through the center of the circle
How does the construction of dams positively affect natural resources?
by providing water for irrigation and restoring trees to areas where forests once existed
by creating reservoirs, preventing flooding, and renewing destroyed ecosystems
by preventing flooding, creating reservoirs, and providing water for irrigation
by renewing destroyed ecosystems and restoring trees to areas where forest once existed
Other person is incorrect, I did the test on edg.
Answer:
A. by providing water for irrigation and restoring trees to areas where forests once existed
The construction of dams positively affect natural resources by providing water for irrigation.
What is natural resources?Natural resources serves as materials thst is found in nature which are used by humans. These natural substances are soil, water.
Therefore, building of dams can help irrigation by using water which is a natural resources.
Learn more about natural resources at;
https://brainly.com/question/24623157
You are accelerating upwards in an elevator when the net force on you increases. What happens to the acceleration
Answer:
the acceleration of the elevator is increasing
Explanation:
For this exercise we propose the solution using Newton's second law
F -W = m a
F = m (g + a)
If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.
Un proton penetra perpendiculares en un campo magnetico de 5 teslas con una velocidad de 2.10 m/s calcula
Answer:
The magnetic force acting on the proton is 1.68 x 10^-18 N.
Explanation:
magnetic field, B = 5 T
speed , v = 2.1 m/s
charge q = 1.6 x 10^-19 C
Angle, A = 90 degree
The magnetic force on the charge particle is given by
[tex]F = q v B sin A\\\\F = 1.6\times 10^{-19}\times 2.1\times 5\times sin 90\\\\F = 1.68\times 10^{-18} N[/tex]
In 'coin on card' experiment a smooth card is used.
Answer:
In coin card experiment smooth card is used so that the card can slide easily from glass
When your vehicle turns a corner, the tracks made by the rear tires are always: a) Outside of those made by your front tires b) Inside of those made by your front tires c) On top of those made by your front tires d) None are correct
Answer:
I think it's D
Explanation:
because I have seen the tracks of the tires
Capacitance (C) is measured in farads, where 1 farad is equivalent to 1 coulomb per volt. Resistance (R) is measured in ohms, and 1 ohm is equal to 1 volt per ampère. The coulomb is defined as the amount of charge passing when a current of 1 ampère flows for 1 second. What is the unit of RC expressed in its simplest form?
When fundamental units are combined, they result in derived units. RC (which means Resistance Capacitance) is a derived unit and its unit in the simplest form is Coulomb per Ampere (C/A)
Given that:
Capacitance (C) [tex]\to[/tex] Farads (f)
and
[tex]1f = 1\frac CV[/tex] ----- 1 farad = 1 capacitance per volt
Resistance (R) [tex]\to[/tex] Ohms [tex]\Omega[/tex]
[tex]1 \Omega = 1\frac{V}{A}[/tex]
The unit of RC is the product of the unit of R by the unit of C.
i.e.
[tex]RC = 1f \times 1\Omega[/tex]
Substitute [tex]1f = 1\frac CV[/tex]
[tex]RC = 1\frac CV \times 1\Omega[/tex]
Substitute [tex]1 \Omega = 1\frac{V}{A}[/tex]
[tex]RC = 1\frac CV \times 1\frac VA[/tex]
Cancel out volts (V)
[tex]RC = 1\frac CA[/tex]
[tex]\frac CA[/tex] means Coulomb per Ampere
Hence, the unit of RC is Coulomb per Ampere.
Read more about units at:
https://brainly.com/question/10167613
The boiling point of a substance is _72 degree Celsius. This temperature will be equivalent to Kelvin scale is-------.
Answer:
345 K
Explanation:
Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.
Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).
Given the following data;
Boiling point = 72°CTo convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;
Kelvin = 273 + °C
Substituting into the formula, we have;
Kelvin = 273 + 72
Kelvin = 345 K
Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.
Which of the following is NOT TRUE about food irradiation?
O It is practiced around the world.
O It leaves food mildly radioactive.
It is effective in killing microorganisms.
o It destroys microorganisms without cooking.
Answer:
It is practiced around the world .
The statement, that is, food irradiation leaves food mildly radioactive is not true.
• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.
• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.
• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.
• Food irradiation has been approved in over forty countries and is almost practiced globally.
Thus, the statement, that is, it leaves food mildly radioactive is incorrect.
To know more about:
https://brainly.com/question/19586033
An airplane with a ground speed of 550 km/hr travels along a heading of 30 degrees n of w at that high altitude there is a powerful 210 km/hr wind
Answer:
Determine the direction that the pilot is aiming the plane.
Explanation:
[tex]what \: is \: mirror \: {?}[/tex]
In a science museum, a 130 kg brass pendulum bob swings at the end of a 14.4 m -long wire. The pendulum is started at exactly 8:00 a.m. every morning by pulling it 1.7 m to the side and releasing it. Because of its compact shape and smooth surface, the pendulum's damping constant is only 0.010kg/s. You may want to review (Pages 405 - 407) . Part A At exactly 12:00 noon, how many oscillations will the pendulum have completed
Answer:
The time in which the pendulum does a complete revolution is called the period of the pendulum.
Remember that the period of a pendulum is written as:
T = 2*pi*√(L/g)
where:
L = length of the pendulum
pi = 3.14
g = 9.8 m/s^2
Here we know that L = 14.4m
Then the period of the pendulum will be:
T = 2*3.14*√(14.4m/9.8m/s^2) = 7.61s
So one complete oscillation takes 7.61 seconds.
We know that the pendulum starts moving at 8:00 am
We want to know 12:00 noon, which is four hours after the pendulum starts moving.
So, we want to know how many complete oscillations happen in a timelapse of 4 hours.
Each oscillation takes 7.61 seconds.
The total number of oscillations will be the quotient between the total time (4 hours) and the period.
First we need to write both of these in the same units, we know that 1 hour = 3600 seconds
then:
4 hours = 4*(3600 seconds) = 14,400 s
The total number of oscillations in that time frame is:
N = 14,400s/7.61s = 1,892.25
Rounding to the next whole number, we have:
N = 1,892
The pendulum does 1,892 oscillations between 8:00 am and 12:00 noon.
What is meant by measurement? l
Answer:
The action of measuring the size, length, or amount of something, as established is called measurement.
Explanation:
“Measurement” is the act of determining a target's size, length, weight, capacity, or other aspect. ... To use measurement tools as necessary. It is also appropriate to say that measurement is done by a worker using a measurement system, and instrumentation is done by a technician.
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions.
Which is the best analysis of Eli’s statement?
The question is incomplete, the complete question is;
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.
Answer:
It is incorrect because sodium phosphate is a compound that has a single composition
Explanation:
A compound is a neutral substance made up of two or more atoms which are chemically combined together.
Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.
Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.
6. traction a. friction between a tire and the road.b. pushes a moving object out of a curve and into a straight linec. the ability of a car to hold a straight lined. a road higher in the center than on either edge 7. kinetic energy a.a force that keeps objects moving in a straightb. reduces the effects of inertiac. energy of motiond. a road higher in the center than on either edge 8. force of impact a. a force that keeps objects moving in a straight line.b. a road higher in the center than on either edgec. the force with which a moving vehicle hits another objectd. perception distance, reaction distance, and braking distance
Answer:
6. a. friction between a tire and the road
7. c. energy of motion
8. c. the force with which a moving vehicle hits another object
Explanation:
6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.
So, the answer is a
7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.
So, the answer is c
8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.
So, the answer is c.
A neutral object must have _______________ A. An equal amount of positive and negative charges B. no charges present at all C. more positive than negative charges D. more negative than positive
Answer:
A
Explanation:
Consider a question you may not have considered before. Suppose you have a mole of sodium in a container that contains nothing that it will react with. A mole of anything is 6.02 * 10^23 (in this case atoms).
Suppose that every one of those atoms has contributed 1 electron to something.
Do you think it would be safe to touch the container knowing that there are 6.02 * 10^23 positive charges all eager to get another electron, because they don't like repelling each other.
Safe or not? I'll give you a hint. A lightning bolt does not contain anywhere near 6.02*10^23 charges. No where near.
So -- since you never get a shock from just touching anything, There must not be electrons or ions present.
The answer is A
What is the relationship between Avogadro's number and a mole?
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
B. A mole is a smaller amount than Avogadro's number.
C. Avogadro's number is used to count particles, and a mole is used
to measure mass.
D. A mole applies to any item, but Avogadro's number is limited to
atoms.
SUBM
Answer:
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
Explanation:
The mole of a substance is
The force that the left team pulls with is 1000 N. If the right team's total mass is 300 kg and they accelerate by 1.2 m/s2, what is the force of resistance on the right team
Answer:
the force of resistance on the right team is 360 N
Explanation:
Given;
force of the left team, = 1000 N
total mass of the right team, m = 300 kg
acceleration of the right team, a = 1.2 m/s²
The force of resistance of the right team is calculated as;
Force = mass x acceleration
Force, F = 300 x 1.2
Force = 360 N
Therefore, the force of resistance on the right team is 360 N
(c) The metal block had a mass of 1.50 kg
The specific heat capacity of the metal was 900 J/kg °C
Calculate the change in thermal energy of the metal during 240 seconds.
Use the Physics Equations Sheet.
Give your answer in kilojoules.
Answer:56
Explanation: I did the test
Amy throws a softball through the air. What are the different forces acting on the ball while it’s in the air?
The softball experiences
force as a result of Amy’s throw. As the ball moves, it experiences
from the air it passes through. It also experiences a downward pull because of
.
Answer:
1.the friction of air, gravity2.gravity
Answer:
The softball experiences an applied force as a result of Amy’s throw. As the ball moves, it experiences drag from the air it passes through. It also experiences a downward pull because of gravity.
Explanation:
Plato
When applying an arm sling, the injured arm's hand should be placed in a ________ position in the sling, and above the level of the elbow.
Answer:
The answer is "thumb-up".
Explanation:
The sling often called the arm sling, is a solution for preventing either shoulder or elbow motion during healing. A triangle bandage could be constructed.
A sling is a strong tissue loop that descends from the head to hold the forearm. The armrests in the sling bent also at the elbow.
The injured hand of the forearm should be positioned inside the pin position in the joint above the level of the elbow when putting the forearm sling.
Why would an airplane flying at 10,000 meters above the ground have more gravitational potential
energy than the same airplane flying at 1,000 meters above the ground?
Answer:
The gravitational potential energy (gpe) possessed by an object or body is directly proportional to the height of the object or body.
Explanation:
Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.
Mathematically, gravitational potential energy is given by the formula;
G.P.E = mgh
Where;
G.P.E represents potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
Generally, the gravitational potential energy (gpe) of an object or body is directly proportional to the height of the object or body. Thus, the gravitational potential energy of a body increases as the height of the body increases.
In conclusion, an object with a higher height would have a higher gravitational potential energy.
