Answer:
the answer to this question is c
Answer:
A) force of friction
Explanation:
frictional forces are always negative, they are an opposing force they act opposite to the applied force.
Please help!!!!! I will give brainliest. Describe four examples of acceleration you see during your day. Choose an object that is slowing down, one that is speeding up, one that is moving at a constant speed but changing direction, and one that is moving at a constant velocity with zero acceleration.
When the brake is applied to the car and comes to rest after some time is an example of an object that is slowing down.
What is acceleration?The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
1. When the brake is applied to the body and comes to rest after some time is an example of an object that is slowing down.
2. When a person accelerates the car and the velocity is increasing is an example of speeding up.
3. An object moves in a circular motion moving at a constant speed but changing direction,
4. Acceleration is the rate of change of velocity. If the change in the velocity is constant the acceleration is zero is an example of moving at a constant velocity with zero acceleration.
To learn more about acceleration, refer to the link;
https://brainly.com/question/2437624
#SPJ1
A body of mass 5 kg moving with velocity 10m/s attains a velocity of 30m/s in 20 seconds, after applying the force. The amount of force applied will be:
a 10N
b 20N
c 5N
d 15N
Answer↷
c) 5N
➦I hope it seemed helpful to you!
A sled with mass 11.00 kg moves in a straight line on a frictionless horizontal surface. At one point in its path, its speed is 4.00 m/s; after it has traveled a distance 3.00 m beyond this point, its speed is 7.00 m/s. Use the work-energy theorem to find the force acting on the sled, assuming that this force is constant and that it acts in the direction of the sled's motion.
Answer:
The magnitude of the force acting on the sled is 60.5 newtons.
Explanation:
The Work-Energy Theorem states that the work done by the external force applied on the sled ([tex]W[/tex]), in joules, is equal to the change of its translational kinetic energy ([tex]\Delta K[/tex]), in joules:
[tex]W = \Delta K[/tex] (1)
By definitions of work and translational kinetic energy we expand the equation above:
[tex]F\cdot s = \frac{1}{2}\cdot m\cdot (v_{2}^{2}-v_{1}^{2})[/tex] (1b)
Where:
[tex]F[/tex] - External force applied on the sled, in newtons.
[tex]s[/tex] - Travelled distance, in meters.
[tex]v_{1}, v_{2}[/tex] - Initial and final velocities, in meters per second.
If we know that [tex]m = 11\,kg[/tex], [tex]v_{1} = 4\,\frac{m}{s}[/tex], [tex]v_{2} = 7\,\frac{m}{s}[/tex] and [tex]s = 3\,m[/tex], then the external force applied on the sled is:
[tex]F = \frac{m\cdot (v_{2}^{2}-v_{1}^{2})}{2\cdot s}[/tex]
[tex]F = \frac{(11\,kg)\cdot \left[\left(7\,\frac{m}{s} \right)^{2}-\left(4\,\frac{m}{s} \right)^{2}\right]}{2\cdot (3\,m)}[/tex]
[tex]F = 60.5\,N[/tex]
The magnitude of the force acting on the sled is 60.5 newtons.
Which of these is untrue about ray diagrams?
A. The arrowheads show the direction of the light
B. Lines must always be straight
C. More arrowheads on lines mean a brighter light
Answer:
The untrue option is C: "More arrowheads on lines mean a brighter light"
Explanation:
Ray diagrams are used to show how the light behaves with things like mirrors or lenses. Where we only study how the direction of the light changes when it interacts with these objects.
The "light" is represented with arrows, where again, the only thing we care is the direction of the light, so the first statement is true, the arrowheads show the direction of the light, and only that.
The intensity of the light, in this context, has no effect on how light behaves, so there is not a necessity of representing the intensity of the light, thus, more arrowheads on lines do not mean a brighter light. It may only be used to represent changes in direction of the light.
Finally, we know that light travels in straight pats (the pats can be curved in some cases, like with large gravitational fields, but this is not the case of a ray diagram) so the lines that represent the light should always be straight, thus option B is also true.
The untrue option is C: "More arrowheads on lines mean a brighter light"
1- Un avión vuela horizontalmente con una velocidad cuya magnitud es de 100 m/s y deja caer un proyectil desde una altura de 400 m con respecto al suelo. Determinar: a) El tiempo que transcurre antes de que el proyectil se impacte en el suelo. b) ¿Qué distancia horizontal recorre el proyectil después de iniciar su caída?
2- Se lanza horizontalmente un objeto con una velocidad de 80 m/s desde una altura de 160 m. Calcular: a) El tiempo que tarda en llegar al suelo b) La magnitud de la velocidad vertical que lleva a los 3 segundos. c) La distancia horizontal a la que cae el objeto a partir del punto desde que fue arrojada.
3- Se lanza un proyectil con una velocidad inicial de 80 m/s y una inclinación, sobre la horizontal, de 30°. Calcular: a) ¿Cuál es la altura máxima que alcanza la bala? b) ¿Cuáles son las posiciones, x y y, cuando han transcurrido 5 segundos?
4- Un joven patea una pelota contra un arco con una velocidad inicial de 20 m/s y con un ángulo de 45°. Determinar: a) cual es el alcance total
The momentum of an object is 35 kg•m/s and it is travelling at a speed of 10 m/s.
a) What is the mass of the object?
Answer:
[tex]{ \bf{momentum = mass \times velocity}} \\ \\ { \tt{35 = m \times 10}} \\ { \tt{mass = 3.5 \: kg}}[/tex]
In this experiment, the ______ was intentionally manipulated. This was the independent variable.
A. fan speed
B. mass
C. acceleration
Answer:
Fan speed
Explanation:
because is the dependent variable
how do you do question 1?
Answer:
DONT KNOW SORRY XD
Explanation:
BEC I AM BRAINLESS USING BRAINLY
Answer:
Ok, so at point 20 on the x axis you put 12 on the y-axis, then draw a line from 0, 0 to that point, this demonstrates the acceleration to 12 m/s.
Next, calculate the time he cycled for if he suckled the distance of 4800m :
4800/12 = 400 s
Put a dot at 400, 12. The time changed but the speed remained constant, line is horizontal.
For the last one, he had to decelerate at an equal speed. Since there is 100 s left of the journey at that stage, You need to draw a straight line from the previous point to 500, 0. So at time 500 he was not accelerating at all, he came to rest.
a) ?
b) -0.16 meters a second acceleration
list 8 countries which have launched satellites into space and also list the name of the satellite which was launched by the countries
What is the volume occupied by 15.0 moles of the gas at 280 K at a pressure of 100 Pa?
Consider. R=831 Pa m (mol-K)
Answer:
34902
Explanation:
Pv=nRt
v=nrt/p
subsitute
v=15*831*280/100
v=34902
plz help me yesterdays answer was wrong....
Name the Thermal expansion of fluids such as liquid and gas
Answer:
water
mercury in thermometer
volume gas thermometer
jar lids
power lines
help....................
is our body in thermal equilibrium with the environment ?
Answer:
The human body runs at a constant 37 ºC but the air around you at room temperature is about 20-25 ºC which means heat is constantly leaving your body to warm your surroundings and maintain thermal equilibrium. You don't lose much energy doing this however as air heats reasonably quickly
Explanation:
Two parallel circular rings of radius R have their centres in the X axis separated by a distance L. If each ring carries a uniformly distributed charge Q,find the electric field at points along the X axis
Answer:
E" = Q/4πε₀√[(x² + R²)]³(x - (L - x)/√[(L - 2x)L/(x² + R²) + 1]³})
Explanation:
The electric field due to a charged ring of radius R at a distance x from the center of the ring when the axis of the ring is located on the x - axis is
E = Qx/4πε₀[√(x² + R²)]³
Since the rings are separated by a distance L, the electric field at point x due to the second ring is E' = -Q(L - x)/4πε₀[√((L - x)² + R²)]³. It is negative since it points in the negative x - direction.
So, the resultant electric field at x is E" = E + E' = Qx/4πε₀[√(x² + R²)]³ + {-Q(L - x)/4πε₀[√((L - x)² + R²)]³}
E" = Qx/4πε₀√[(x² + R²)]³ - Q(L - x)/4πε₀√[((L - x)² + R²)]³
E" = Q/4πε₀(x/√[(x² + R²)]³ - (L - x)/√[((L - x)² + R²)]³})
E" = Q/4πε₀(x/√[(x² + R²)]³ - (L - x)/√[(L² - 2Lx + x² + R²)]³})
E" = Q/4πε₀(x/√[(x² + R²)]³ - (L - x)/√[(L - 2x)L + (x² + R²)]³})
E" = Q/4πε₀√[(x² + R²)]³(x - (L - x)/√[(L - 2x)L/(x² + R²) + 1]³})
So, the electric field at points along the x axis is
E" = Q/4πε₀√[(x² + R²)]³(x - {(L - x)/√[(L - 2x)L/(x² + R²) + 1]³})
A constellation’s changing position in the sky, at the same time of the evening, over a period of several weeks is evidence that:
a- Earth is round b- Earth’s axis is tilted. c- Earth rotates on its axis.
d- Earth revolves around the sun.
Answer:
d- Earth revolves around the sun.
Explanation:
Earth rotation can be defined as the amount of time taken by planet earth to complete its spinning movement on its axis.
This ultimately implies that, the rotation of earth refers to the time taken by earth to rotate once on its axis. One spinning movement of the earth on its axis takes approximately 24 hours to complete with respect to the sun.
On the other hand, earth revolution can be defined as a complete trip along a path around the sun. This path is known as an orbit and it typically takes the Earth 365¼ days to complete it's journey around the Sun.
When a constellation (stars) changes its position in the sky, at the same time of the evening and over a period of several weeks; it ultimately implies or is an evidence that Earth revolves around the sun.
A cell has an emf of 1.5 V and an internal resistance of 0.65 Q.
The cell is connected to a resistor R.
[0[8].[4] State what is meant by an emf of 1.5 V.
[2 marks]
I
[0] 8]-[2] The current in the circuit is 0.31 A.
Show that the total power output of the cell is approximately 0.47 W.
[1 mark]
[o[s).[3] Calcutate the energy dissipated per second in resistor R.
[2 marks]
energy dissipated per second = Ist
[o[si.[4] The cell stores 14 kJ of energy when it is fully charged. The cell's emf and internal resistance are constant as the cell f discharged.
Calculate the maximum time during which the fully-charged cell can deliver energy to
resistor R.
[2 marks)
maximum time = 5
Answer:
14000 J / 0.40 J/s = 35 000 s or about 9.75 hrs
The dependent variable measured was the ______
a. fan speed
b. mass
c. acceleration
Answer:
a
Explanation:
Fan speed is the answer
How can you increase efficiency of a simple machine??
Answer:
Efficiency can be increase by using rollers in conjunction with the inclined plane. Wedge. The wedge is an adaptation of the inclined plane. It can be used to raise a heavy load over a short distance or to split a log.
Explanation:
Hope it helps
what is time write its SI unit
if a train starts from rest and attains a velocity of 100m/s in 25 seconds. calculate the acceleration produced by the train.
Behaviors in deer such as herding and male deer using antlers to compete for females increase the chances of successful reproduction.
True or False
Answer:
True
Explanation:
The reproductive success of any species is the capability to produce their offspring per breeding lifetime or event.
Most of the species have to attract their partners by their physical capability and build up so that the mother can choose her partner in order to breed the best kind of off spring.
In the context, in case of deer, the size of the their antlers as well as behavior in herding is considered as the best chances for a successful reproduction to compete among the males and find their breeding mate.
Thus the answer is TRUE.
QUESTION 30 A tennis ball moves back and forth 10 times in 5 sec. The frequency of its motion is
Answer:
so in 1 sec 2 times
so frequency = 2
Explanation:
which of the following items has the most inertia while at rest
Answer:
wats the following items
The three scientists credited with using all available data and correctly determing the sturcture of dna from many years of previous work are
Answer:
James Watson, Francis Crick, and Maurice Wilkins
Explanation:
The three scientists that used the available data ( x-ray images of DNA provided by Rosalind Franklin) to correctly determine the structure of DNA are : James Watson, Francis Crick, and Maurice Wilkins.
These scientists discovered the structure of DNA in 1953 and they received, and they receive a Nobel Prize in Physiology or Medicine for their discovery
Change the following as indicated in the brackets.
8m (km,cm)
metres to kilometres = 1/1000
8 m ⇒ 0.008 km
metres to centimetres = × 100
8 m ⇒ 800 cm
Answer:
1000m=1km
so, 8m=8/1000 = 0.008km
1m=100cm
so, 8m=8×100=800
ASAPP PLS HELP MEE
The density of aluminum is 2.7 g/cm^3. Which of the following statement is true?
A) 1 g of aluminium has a volume of 1 cm^3
B) 2.7 g of aluminium has a volume of 1 cm^3
C) 1 g of aluminium has a volume of 2.7 cm^3
D) 2 g of aluminium has a volume of 7 cm^3
Answer:
B) 2.7 g of aluminium has a volume of 1 cm^3
Explanation:
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
If the density of aluminum is 2.7 g/cm³, it simply means that 2.7 g of aluminium has a volume of 1 cm³
Check:
Given the following data;
Mass = 2.7 grams
Volume = 1 cm³
Substituting into the formula, we have;
[tex]Density = \frac{2.7}{1}[/tex]
Density = 2.7 g/cm³
The
push switch is closed and the door unlocks. Explain in detail how this happens.
Answer:
The push switch is closed and the door unlocks. ... The switch completes the circuit and a current flows through the coil. The coil becomes an electromagnet and its iron core becomes magnetised. The iron bolt is attracted to the electromagnet.
Explanation:
Please Mark me brainliest
A partially inflated balloon is faded over the open end of a glass beaker that contains water the beaker is placed in an ice bath which cause the water and causes the balloon to the flea what are the correct designs for the heat and work changes to the beaker and balloon system
Answer:
a
Explanation:
If a serve hits the net, what happens?
• Re-do
• Dead Ball
• Other teams point
• Play the ball
Answer:
Depends: Is it tennis or volleyball?
Explanation:
If it's volleyball, it's C, the other teams point.
If it's tennis, it's A, you get a re-do.
What is a temperature of 40 K equivalent to in degrees Celsius?
The answer is -233.15° C
-
Explanation:
We know,
0 Kelvin = -273.15° C
So, 40 K = (-273.15+40) = -233.15° C
If my answer helps then please mark me brainliest.
Answer:
-233.15'C
Explanation:
