density = mass/volume
252/30 = 8.4 g/cm3
The metal is likely to be Nichrome
What is Density?
The Density of a material is the mass per unit volume
say the mass is m kg
and the volume is v cm^3
Then the density is
Density = mass/volume
Given data
Mass = 252g gram
volume = 30 cm^3
Hence the density can be calculated as
Density = 252/30
Density = 8.4 g/cm^3
From the value, this corresponds to the density of Brass
for more information visit https://brainly.in/question/2786638
What are two factors that can change the rate of a chemical?
Answer:
the surface area of a solid reactant.
temperature.
presence/absence of a catalyst.
Someone plz help me :(
Answer:
B and A.
Explanation:
Many of the great scientists were religious. But the answer is not D.
A scientist may have strong opinions. That was certainly true of Newton. Most of the time he was right. Still the answer is not C. Science requires an open mind.
The answer is between A and B. Many discoveries were made looking at the natural world. That may provide the inspiration. But I don't think it is the answer. I'm going to say A
B is the other answer. Between A and B many scientific truths have been discovered.
A car start from rest and covers distance of 100m after 10seconds.if the acceleration is 2m/s square, calculate the final velocity..
Answer:
20 m/s
Explanation:
solution,
initial velocity (u)=0 m/s
Distance covered(s)=100m
Time taken(t)=10 seconds
Acceleration (a)=2m/s²
Now,
By using first equation of motion, we have
v=u+at
=0+2×10
=20 m/s
I hope it helped U
stay safe stay happy
what amount (in moles) is present in 2.0g of sodium hydroxide,NaOH
Answer: 0.050 moles of NaOH
Explanation: The molar mass of NaOH is 40.0g/mole
2.0g/40.0g/mole = 0.050 moles (2 sig fig)
As a professor Daniel must complete a research project each year in order to
stay on staff. Daniel is an engineer and has to deal with many complicated
mathematical calculations. Knowing this fact Daniel would most likely concern
himself with qualitative research,
Explanation:
Add our site sources in order to be advantage of knowledge
during the interconversion of state of matter, mass undergoes and change? true or false
True.
The Mass Undergoes change only in ( Solid state to liquid state ) Ice Cube to Water .
Mass changes from mg to litre.
[tex]\huge\mathfrak\red{hope \: it \: helps}[/tex]
Which of the following best describes a scientific model?
Question 6 options:
Something used to represent an idea or process
A way to prove a theory is true
A direct experience in nature
A prediction that can be tested
Explanation:
idea= hypothesis
xperience in nature= read Darwin's theory..
with birds from Galapagos island or rain forest environment., had proven that the shape of a bird's beaks, determined what their diet consisted of In the wild.
captured birds from such countries, has proven, an omnivore or seed eater...through testing plus dissection.
3. Take vinegar, lemon juice, tap water in three separate glass beakers. Put chalk piece,pin, egg shell, leaves in three beakers. Note your observations how test the gas evolved in it.
Answer:
This process is know as Chromotography
Explanation:
PLS HELP. DUE TODAY.
1. T or F? All protons in an element contain an identical number of neutrons.
2. An atom with a _____ charge has the same number of protons and electrons.
Answer:
1. falseno all protons in an element doesn't contain an identical number of neutrons . number of electrons and number of protons contain identical number but the number of neutrons may vary. for eg: protons and neutrons of hydrogen is 1 and 0 respectively whereas protons and neutrons of helium is 2 and 2 .
2.neutral chargeWhat would the car weigh on Earth with a gravitational pull of 9.8 N/kg?
Answer:
Explanation:s the gravitational field strength on Earth's 9.8 N kg?
The gravitational field strength of the Earth is 10 N/kg (10 newtons per kilogram).
Distillation can be separated in what technique?
A. Chemical
B. Physical
Answer:
B. Physical process is the way distillation can be separated.
5. What is common among the following phenomena?
* Blinking of traffic light
* Rotation of blades of fan
* Swinging of pendulum of a clock
a) All are chemical changes
b) All are periodic changes
c) All are undesirable changes
d) All are irreversible changes
Answer:
All are periodic changes
[And is that a todoroki pfp, I like MHA too
(・∀・) ]
what is electron configuration?
Answer:
electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals.
Measurements of the heights of various plants in an experiment are called
Answer:
Option 1 Data
Answer:
data
Explanation:
that is the answer
please 5 stars
Which statement about metals and nonmetals is correct? (1 point)
O Metals and nonmetals can both be found in any column of the periodic table.
O Most metals are a solid under normal conditions, and most nonmetals are a liquid.
O Metals tend to be poor conductors of electricity, while nonmetals are strong conductors of electricity.
O Metals can be hammered into thin sheets, and nonmetals are brittle
Answer:
The answer is the 4th one
The statement about metals and nonmetals that is correct is: "The Metals can be hammered into thin sheets, and nonmetals are brittle."
Metals are found mostly towards the left hand side of the periodic table. Non-metal character increases as you move towards the right hand side of the table.
One common property of metals is that they are malleable; this means that they can be hammered into sheets while a common property of nonmetals is that most of them are brittle.
Learn more: https://brainly.com/question/10714037
Heisenberg's uncertainty principle stats that's isn't possible to know the exact momentum and _______ of a particle simultaneously. In terms of atomic structure, this means that we can't determine fixed ________ for electrons but can only determine the _________ of finding an electron in a given region of space.
A. Identify the type of molecule shown in the drawing. (2 points)
Answer: 1) Caboxylic acid
2) Ether
3) Ester
4) Aldehyde
5) Amine
6) Alcohol
Explanation: The type of a molecule is based it's primary functional group.
https://en.wikipedia.org/wiki/Functional_group
The identities of the given molecules shown in the drawing are:
1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
What are the organic compounds?Organic compounds are those compounds, which contain carbon-carbon and carbon-hydrogen bonds.
The five organic compounds are lipids, carbohydrates, protein, nucleotide, etc.
Thus, the correct option is 1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
Learn more about organic compounds
https://brainly.com/question/5994723
#SPJ2
Nguyên tố hoá học là gì
Nguyên tố hóa học, thường được gọi đơn giản là nguyên tố, là một chất hóa học tinh khiết, bao gồm một kiểu nguyên tử, được phân biệt bởi số hiệu nguyên tử, là số lượng proton có trong mỗi hạt nhân.
Hope U like my answer and my answer helped U......
How are elements arranged on the periodic table?
a. they are arranged to highlight similarities between elements
b. they are arranged to highlight different elements with similar isotopes
c. they are arranged in order from most abundant to very rare and unstable
d. they are arranged in order of the date of discovery
Answer:
the elements are listed in order of increasing atomic number. The atomic number is the number of protons in the nucleus of an atom.In a periodic table arranged in order of increasing atomic number, elements having similar chemical properties naturally line up in the same column.
The elements on the periodic table are arranged on the basis of highlighting similarities between elements. Thus, the correct option for this question is A.
How elements are arranged on the periodic table?The elements on the periodic table are basically arranged on the basis of increasing their atomic number. These atomic number is represented by the number of protons in the nucleus of an element.
According to the question, the elements possessing identical chemical properties are arranged in the same group. For example, group 17 is known as the halogen group. Among this group, the elements bear one electron short to fulfill their octet.
The whole periodic table comprises of 18 groups and 7 periods.
Therefore, the elements on the periodic table are arranged on the basis of highlighting similarities between elements. Thus, the correct option for this question is A.
To learn more about the Periodic table, refer to the link:
https://brainly.com/question/15987580
#SPJ2
What is the Color of trioxonitrate(v)
Answer:
it's yellowish in color plz Mark me as brainliest
Answer:
It's a yellowish color like copper
give any two reasons that hydrogen is kept in group 1 in Modern Periodic Table
Answer:
Hydrogen is usually classified as a group 1 element since it has one valence electron, just like group 1 metals.
Explanation:
How does water vapor in the air change state below the freezing point
Answer:
Water vapor molecules in the air near the can cooled when energy from the air transferred to the cold can. These water molecules slowed down, condensed to liquid water, and then froze to become ice. Your can might have some water and some ice on the outside of it.
Explanation:
Which describes a relationship when calculating the energy of a photon? The energy of the photon is directly proportional to frequency. The energy of the photon is inversely proportional to frequency. As the energy of the photon increases, Planck’s constant increases. As the energy of the photon increases, Planck’s constant decreases.
Answer:
The photon is directly proportional to frquency
Explanation:
E=hf
where E is energy
h is plancks constant and
f is frequency
Answer:
A
Explanation:
Edge 2022
anyone know valency of phosphide and phosphite please tell me and also they are not same .If you know can i get their symbol too please
i found this. there's more coming up
Why does the author include information about bread and sandwich wrappings in the article?
(A) to show that the scientific method is often used to understand things about food
(B) to provide an example of something that can be tested by the scientific method
(C) to demonstrate the problems that can be caused by improper seals and wrappings
(D) to help evaluate how the weight of bread can show how much moisture it has
Answer:
what is the story about actually.i think it's from ur lesson
Explanation:
certain breads mold easily...(fact)..
especially white bread., when exposed to any moisture, from refrigeration, or freezing..
when taken out of (cold environment), humidity in air causes molding because you take it from cold to/warm environment.
check expiration dates, keep refrigerated, and inspect 4 molding. Companies like WMART, buy in bulk, when on shelf, defrosts,, then has molding within expiration dates..
I need help on this, It’s due today. Please, anybody
Answer:
1 = 252g, 2 = 2mL, 3 = 1.5mL, 4 = 3g, 5 = 225g, 6 = 0.92g/mL, 7 = 0.75g/mL, 8 = 0.71g/mL, 9 = 1.9mL, 10= 1.11mL, 11 = 76.9g
Explanation:
This problem is testing how well you can move around the equation D = m/v where D = Density (g/mL), m= mass of sample (g), v = volume of sample (mL).
summarize why error is important.
Which of the following statements correctly explains why the excretory system is different from the digestive system? (1 point)
The excretory system is different from the digestive system because it removes waste from the body by filtering water, which
includes mostly the by-products of metabolism.
The excretory system is different from the digestive system because it removes waste from the body by filtering urine, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering food, which
includes mostly the by-products of metabolism. filtering food
SS
2
The excretory system is different from the digestive system because it removes waste from the body by filtering blood, which
o
includes mostly the by-products of metabolism
U.
Hey
Answer:
The excretory system removes waste from the body. remove waste from the blood. The digestive system breaks down the food you eat into nutrients that provide energy and building materials for cells. The digestive and excretory sytems work together to process the food that you eat.
A dehydration reaction (or condensation reaction) is the process in which _____. See Concept 5.1 (Page) View Available Hint(s)for Part A water molecules are produced as a polymer is formed from monomers the bonds between the individual monomers of a polymer are broken by the addition of water molecules water molecules are attracted to each other water molecules are used as a source of raw material to break down polymers to monomers None of the choices is correct.
A dehydration reaction (or condensation reaction) is the process in which water molecules are produced as a polymer is formed from monomers.
A chemical reaction is the process by which substances called reactants are transformed to another substance known as products through the breaking up or building up of bonds between the reactants.
There are different types of chemicals reaction which includes condensation reaction.
Condensation reaction involves the combination of two smaller molecules known as monomers to for one larger molecule known as polymer with the loss of water molecule.
Condensation reaction is specifically called dehydration reaction due to the loss of water molecule that is involved.
Therefore, a dehydration reaction (or condensation reaction) is the process in which water molecules are produced as a polymer is formed from monomers.
Learn more here:
https://brainly.com/question/20300284
The strength of van der Waals forces increases as:
A. molecular size decreases
B. molecular size increases
C. number of electrons increases
D. number of electrons decreases
Answer:
B and C
Explanation:
is it multiple choice question??
Van der Waals forces are the interaction between the molecules and the atoms. It increases with an increase in the molecular size and the number of electrons. Thus, options B and C are correct.
What are Van der Waals force?
Van der Waals forces are the weak forces of attraction and repulsion present between the atoms and the molecules of the compounds. They are also called London Dispersion Forces and dipole-dipole forces.
An increase in the number of electrons and size of the molecule increases the surface area and the electron cloud which in turn, increases the Van der Waals force.
The intermolecular force increases as in large atoms or molecules the valence are held loosely as they are far from the nucleus or the center of the atom.
Therefore, the size and the electron increase the Van der Waals force.
Learn more about Van der Waals force here:
https://brainly.com/question/11457190
#SPJ5