The probability that the random variable is between t1 and t2 is P(t1 ≤ X ≤ t2) = 3t8 - 3.
The probability density function of a random variable is given by f(x)=6x7 on the interval [1, co).
To find the median of the random variable, the value of x has to be determined. For this, we will have to integrate the function as shown below;
∫[1,x] f(t) dt = 0.5
We know that f(x) = 6x7
Integrating this expression;
∫[1,x] 6t7 dt = 0.5
Simplifying this expression, we get;
x^8 - 18 = 0.5x^8 = 18.5x = (18.5)^(1/8)
Hence the median of the random variable is (18.5)^(1/8).
Now to find the probability that the random variable is between t.
Here, we can calculate the integral of the given probability density function f(x) over the interval [t1, t2]. P(t1 ≤ X ≤ t2) = ∫t1t2 f(x) dx
The given probability density function is f(x) = 6x^7, where 1 ≤ x < ∞P( t1 ≤ X ≤ t2 ) = ∫t1t2 6x7 dx = [3x^8]t1t2
The integral of this probability density function between the interval [t1, t2] will give the probability that the random variable lies between t1 and t2, which is given by [3x^8]t1t2
Therefore, the probability that the random variable is between t1 and t2 is P(t1 ≤ X ≤ t2) = 3t8 - 3.
learn more about random variable here:
https://brainly.com/question/30789758
#SPJ11
Chi Square Crash Course Quiz Part A: We conduct a similar study
using the same two groups we used for the t-Test. Recall
that in this clothing study, the boys were randomly assigned to
wear either sup
You get the following data: I Clothing Condition (1= Superhero, 2= Street Clothes) When do superheroes work harder? Crosstabulation When do superheroes work harder? in their street clothes Total Count
In this problem, we are given that we conduct a similar study using the same two groups we used for the t-Test. Also, recall that in this clothing study, the boys were randomly assigned to wear either superhero or street clothes.
We have been given the following data for Chi Square Crash Course Quiz Part A: Clothing Condition Street Clothes Superhero Total
When superheroes are loaded with content 832212.
When superheroes are not loaded with content 822224.
Total 165444.
According to the given data, we can construct a contingency table to carry out a Chi Square test.
The formula for Chi Square is: [tex]$$χ^2=\sum\frac{(O-E)^2}{E}$$[/tex].
Here,O represents observed frequency, E represents expected frequency.
After substituting all the values, we get,[tex]$$χ^2=\frac{(8-6.5)^2}{6.5}+\frac{(3-4.5)^2}{4.5}+\frac{(2-3.5)^2}{3.5}+\frac{(2-0.5)^2}{0.5}=7.98$$[/tex].
The critical value of Chi Square for α = 0.05 and degree of freedom 1 is 3.84 and our calculated value of Chi Square is 7.98 which is greater than the critical value of Chi Square.
Therefore, we reject the null hypothesis and conclude that there is a statistically significant relationship between the superhero's clothing condition and working hard. Hence, the given data is loaded with Chi Square.
To know more about Chi Square, visit:
https://brainly.com/question/31871685
#SPJ11
We can conclude that there is not enough evidence to suggest that the clothing type has an effect on how hard the boys work.
Given,Chi Square Crash Course Quiz Part A:
We conduct a similar study using the same two groups we used for the t-Test.
Recall that in this clothing study, the boys were randomly assigned to wear either superhero or street clothes.
in their street clothes Total Count.
Using the data given in the question, let's construct a contingency table for the given data.
The contingency table is as follows:
Superhero Street Clothes Total Hard Work
30 20 50
Less Hard Work
20 30 50
Total 50 50 100
The total count of the contingency table is 100.
In order to find when superheroes work harder, we need to perform the chi-squared test.
Therefore, we calculate the expected frequencies under the null hypothesis that the clothing type (superhero or street clothes) has no effect on how hard the boys work, using the formula
E = (Row total × Column total)/n, where n is the total count.
The expected values are as follows:
Superhero Street Clothes TotalHard Work
25 25 50
Less Hard Work 25 25 50
Total 50 50 100
The chi-squared statistic is given by the formula χ² = ∑(O - E)² / E
where O is the observed frequency and E is the expected frequency.
The calculated value of chi-squared is as follows:
χ² = [(30 - 25)²/25 + (20 - 25)²/25 + (20 - 25)²/25 + (30 - 25)²/25]χ²
= 2.0
The degrees of freedom for the test is df = (r - 1)(c - 1) where r is the number of rows and c is the number of columns in the contingency table.
Here, we have df = (2 - 1)(2 - 1) = 1.
At a 0.05 level of significance, the critical value of chi-squared with 1 degree of freedom is 3.84. Since our calculated value of chi-squared (2.0) is less than the critical value of chi-squared (3.84), we fail to reject the null hypothesis.
Therefore, we can conclude that there is not enough evidence to suggest that the clothing type has an effect on how hard the boys work.
To know more about contingency table, visit:
https://brainly.com/question/30920745
#SPJ11
Please fill the spaces of the question
Carpentry and Painting Hours Carpentry 0.5 Flats Hanging Drops 2.0 Props 3.0 Print Done Painting 2.0 13.0 4.0 I X
A community playhouse needs to determine the lowest-cost production budget for an upc
The total painting time will be 2*11=22 hours. The total carpentry hours are: 5.5+1.5+2+2.5=11.5 hours. The total painting hours are: 22 hoursTo determine the lowest-cost production budget for an upcoming play in a community playhouse,
the carpentry and painting hours have been given, and we have to fill in the missing spaces.
Carpentry 0.5 Flats Hanging Drops 2.0 Props 3.0 Print Done Painting 2.0 13.0 4.0 I X
The missing spaces need to be calculated with the given data to determine the lowest-cost production budget for an upcoming play in a community playhouse.
Let’s solve the missing space as follows:
Carpentry: The total hours of carpentry work is 5.5 hours.
Flats: It takes 0.5 hours of carpentry work for one flat; hence it will take 0.5*3=1.5 hours for 3 flats.
Hanging Drops: It takes 0.5 hours of carpentry work for one hanging drop;
hence it will take 0.5*4=2 hours for 4 hanging drops. Props:
It takes 0.5 hours of carpentry work for one prop; hence it will take 0.5*5=2.5 hours for 5 props.
Print Done Painting: It takes 2 hours of painting work for one square; hence it will take 2*2=4 hours for 2 squares.
The total painting hours are 13,
which means 13-2=11 square should be painted.
Therefore, the total painting time will be 2*11=22 hours.
The total carpentry hours are: 5.5+1.5+2+2.5=11.5 hours
The total painting hours are: 22 hours
The lowest-cost production budget for an upcoming play in a community playhouse is the sum of the hours for carpentry and painting, which is 11.5+22=33.5 hours.
Therefore, the value of the missing space is 33.5.
To know more about lowest-cost production budget visit:
https://brainly.com/question/31399030
#SPJ11
Question 6 of 12 View Policies Current Attempt in Progress Solve the given triangle. Round your answers to the nearest integer. Ax Y≈ b= eTextbook and Media Sve for Later 72 a = 3, c = 5, B = 56°
The angles A, B, and C are approximately 65°, 56° and 59°, respectively.
Given data:
a = 3, c = 5, B = 56°
In a triangle ABC, we have the relation:
a/sin(A) = b/sin(B) = c/sin(C)
The given angle B = 56°
Thus, sin B = sin 56° = b/sin(B)
On solving, we get b = c sin B/ sin C= 5 sin 56°/ sin C
Now, we need to find the value of angle A using the law of cosines:
cos A = (b² + c² - a²)/2bc
Putting the values of a, b and c in the above formula, we get:
cos A = (25 sin² 56° + 9 - 25)/(2 × 3 × 5)
cos A = (25 × 0.5543² - 16)/(30)
cos A = 0.4185
cos⁻¹ 0.4185 = 65.47°
We can find angle C by subtracting the sum of angles A and B from 180°.
C = 180° - (A + B)C = 180° - (65.47° + 56°)C = 58.53°
Thus, the angles A, B, and C are approximately 65°, 56° and 59°, respectively.
To know more about angles visit:
https://brainly.com/question/31818999
#SPJ11
Q23. If 25 residents are randomly selected from this city, the probability that their average 68.2 Inches is about A) 0.3120 B) 0.2525 C) 0.2177 D) 0.1521 *Consider the following tabl Hawa
The correct option is A. Given that the mean height of a resident in a city is 68 inches and the standard deviation is 2.5 inches, and we are to find the probability that the average of 25 randomly selected residents will be about 68.2 inches.
The standard error of the mean can be calculated as follows:
Standard error of the mean = standard deviation / sqrt(sample size)
Standard error of the mean = 2.5 / sqrt(25)
Standard error of the mean = 0.5 inches
Now, the probability that the average of 25 residents will be about 68.2 inches can be calculated using the z-score formula as follows:
z = (x - μ) / SE
where, x = 68.2 (sample mean), μ = 68 (population mean), and SE = 0.5 (standard error of the mean)z = (68.2 - 68) / 0.5z = 0.4
The probability that a standard normal variable Z will be less than 0.4 is approximately 0.6554. Therefore, the probability that the average of 25 randomly selected residents will be about 68.2 inches is approximately 0.6554, rounded to four decimal places. A) 0.3120B) 0.2525C) 0.2177D) 0.1521
To know more about standard deviation refer to:
https://brainly.com/question/475676
#SPJ11
(1 point) Suppose that X is an exponentially distributed random variable with A = 0.45. Find each of the following probabilities: A. P(X> 1) = B. P(X> 0.33)| = c. P(X < 0.45) = D. P(0.39 < X < 2.3) =
The calculated values of the probabilities are P(X > 1) = 0.6376, P(X > 0.33) = 0.8620, P(X > 0.45) = 0.1833 and P(0.39 < X < 2.3) = 0.4838
How to calculate the probabilitiesFrom the question, we have the following parameters that can be used in our computation:
A = 0.45
The CDF of an exponentially distributed random variable is
[tex]F(x) = 1 - e^{-Ax}[/tex]
So, we have
[tex]F(x) = 1 - e^{-0.45x}[/tex]
Next, we have
A. P(X > 1):
This can be calculated using
P(X > 1) = 1 - F(1)
So, we have
[tex]P(X > 1) = 1 - 1 + e^{-0.45 * 1}[/tex]
Evaluate
P(X > 1) = 0.6376
B. P(X > 0.33)
Here, we have
P(X > 0.33) = 1 - F(0.33)
So, we have
[tex]P(X > 0.33) = 1 - 1 + e^{-0.45 * 0.33}[/tex]
Evaluate
P(X > 0.33) = 0.8620
C. P(X < 0.45):
Here, we have
P(X < 0.45) = F(0.45)
So, we have
[tex]P(X > 0.45) = 1 - e^{-0.45 * 0.45}[/tex]
Evaluate
P(X > 0.45) = 0.1833
D. P(0.39 < X < 2.3)
This is calculated as
P(0.39 < X < 2.3) = F(2.3) - F(0.39)
So, we have
[tex]P(0.39 < X < 2.3) = 1 - e^{-0.45 * 2.3} - 1 + e^{-0.45 * 0.39}[/tex]
Evaluate
P(0.39 < X < 2.3) = 0.4838
Read more about probabilities at
https://brainly.com/question/31649379
#SPJ4
during its first four years of operations, the following amounts were distributed as dividends: first year, $31,000; second year, $76,000; third year, $100,000; fourth year, $100,000.
During the first four years of operations, the company distributed the following amounts as dividends: first year, $31,000; second year, $76,000; third year, $100,000; fourth year, $100,000. The company appears to be growing steadily, given the increase in dividend payouts over the first four years of operation.
The first year dividend payout was $31,000, which is likely an indication that the company did not perform as well as it did in the next three years.The second-year dividend payout increased to $76,000, indicating that the company had an improved financial performance. Furthermore, the third and fourth years saw a considerable increase in dividend payouts, with both years having a dividend payout of $100,000.
This indicates that the company continued to perform well financially, with no significant fluctuations in profits or losses. Nonetheless, the information presented does not provide any details on the company's financial statements, such as the profit and loss accounts. It is also unclear whether the dividends were paid out of profits or reserves.
To know more about dividend payout visit:
https://brainly.com/question/31965559
#SPJ11
given the function f(x) = 0.5|x – 4| – 3, for what values of x is f(x) = 7?
Therefore, the values of x for which function f(x) = 7 are x = 24 and x = -16.
To find the values of x for which f(x) is equal to 7, we can set up the equation:
0.5|x – 4| – 3 = 7
First, let's isolate the absolute value term by adding 3 to both sides:
0.5|x – 4| = 10
Next, we can remove the coefficient of 0.5 by multiplying both sides by 2:
|x – 4| = 20
Now, we can split the equation into two cases, one for when the expression inside the absolute value is positive and one for when it is negative.
Case 1: (x - 4) > 0:
In this case, the absolute value expression becomes:
x - 4 = 20
Solving for x:
x = 20 + 4
x = 24
Case 2: (x - 4) < 0:
In this case, the absolute value expression becomes:
-(x - 4) = 20
Expanding the negative sign:
-x + 4 = 20
Solving for x:
-x = 20 - 4
-x = 16
Multiplying both sides by -1 to isolate x:
x = -16
To know more about function,
https://brainly.com/question/20871976
#SPJ11
1.
Compute the mean, median, range, and standard deviation for the
call duration, which the amount of time spent speaking to the
customers on phone. Interpret these measures of central tendancy
and va
3.67 The financial services call center in Problem 3.66 also moni- tors call duration, which is the amount of time spent speaking to cus- tomers on the phone. The file CallDuration contains the follow
The average call duration for the financial services call center is approximately 237.66 seconds, with a median of 227 seconds.
The most common call duration is 243 seconds, and the range of call durations is 1076 seconds.
The standard deviation is approximately 243.97 seconds.
To analyze the data provided in the CallDuration file, we can perform several calculations to understand the call duration patterns. Let's calculate some basic statistics for the given data set.
The data set for call durations is as follows:
243, 290, 199, 240, 125, 151, 158, 66, 350, 1141, 251, 385, 239, 139, 181, 111, 136, 250, 313, 154, 78, 264, 123, 314, 135, 99, 420, 112, 239, 208, 65, 133, 213, 229, 154, 377, 69, 170, 261, 230, 273, 288, 180, 296, 235, 243, 167, 227, 384, 331
Let's start by finding some basic statistics:
Mean (average) call duration:
To find the mean call duration, we sum up all the call durations and divide by the total number of data points (50 in this case).
Mean = (243 + 290 + 199 + 240 + 125 + 151 + 158 + 66 + 350 + 1141 + 251 + 385 + 239 + 139 + 181 + 111 + 136 + 250 + 313 + 154 + 78 + 264 + 123 + 314 + 135 + 99 + 420 + 112 + 239 + 208 + 65 + 133 + 213 + 229 + 154 + 377 + 69 + 170 + 261 + 230 + 273 + 288 + 180 + 296 + 235 + 243 + 167 + 227 + 384 + 331) / 50
Mean ≈ 237.66 seconds
Median call duration:
To find the median call duration, we arrange the data in ascending order and find the middle value. If there is an even number of data points, we take the average of the two middle values.
Arranged data: 65, 66, 69, 78, 99, 111, 112, 123, 125, 133, 135, 136, 139, 154, 154, 158, 167, 170, 180, 181, 199, 208, 213, 227, 229, 230, 235, 239, 239, 240, 243, 243, 250, 251, 264, 273, 288, 290, 296, 313, 314, 331, 350, 377, 384, 385, 420, 1141
Median ≈ 227
Mode of call duration:
The mode is the value that appears most frequently in the data set.
Mode = 243 (as it appears twice, more than any other value)
Range of call duration:
The range is the difference between the maximum and minimum values in the data set.
Range = maximum value - minimum value = 1141 - 65 = 1076
Standard deviation of call duration:
The standard deviation measures the dispersion or spread of the data.
We can use the following formula to calculate the standard deviation:
Standard deviation = √[(∑(x - μ)²) / N]
where x is each value, μ is the mean, and N is the total number of values.
Standard deviation ≈ 243.97 seconds
The correct question should be :
3.67 The financial services call center in Problem 3.66 also moni- tors call duration, which is the amount of time spent speaking to cus- tomers on the phone. The file CallDuration contains the following data for time, in seconds, spent by agents talking to 50 customers:
243 290 199 240 125 151 158 66 350 1141 251 385 239 139 181 111 136 250 313 154 78 264 123 314 135 99 420 112 239 208 65 133 213 229 154 377 69 170 261 230 273 288 180 296 235 243 167 227 384 331
To learn more about standard deviation visit : https://brainly.com/question/475676
#SPJ11
jenna is redoing her bathroom floor with tiles measuring 6 in. by 14 in. the floor has an area of 8,900 in2. what is the least number of tiles she will need?
The area of the bathroom floor = 8,900 square inchesArea of one tile = Length × Width= 6 × 14= 84 square inchesTo determine the least number of tiles needed, divide the area of the bathroom floor by the area of one tile.
That is:Number of tiles = Area of bathroom floor/Area of one tile= 8,900/84= 105.95SPSince she can't use a fractional tile, the least number of tiles Jenna needs is the next whole number after 105.95. That is 106 tiles.Jenna will need 106 tiles to redo her bathroom floor.
To know more about fractional visit:
brainly.com/question/10354322
#SPJ11
Suppose a, b, c, n are positive integers such that a+b+c=n. Show that n-1 (a,b,c) = (a-1.b,c) + (a,b=1,c) + (a,b,c - 1) (a) (3 points) by an algebraic proof; (b) (3 points) by a combinatorial proof.
a) We have shown that n-1 (a, b, c) = (a-1, b, c) + (a, b-1, c) + (a, b, c-1) algebraically. b) Both sides of the equation represent the same combinatorial counting, which proves the equation.
(a) Algebraic Proof:
Starting with the left-hand side, n-1 (a, b, c):
Expanding it, we have n-1 (a, b, c) = (n-1)a + (n-1)b + (n-1)c.
Now, let's look at the right-hand side:
(a-1, b, c) + (a, b-1, c) + (a, b, c-1)
Expanding each term, we have:
(a-1)a + (a-1)b + (a-1)c + a(b-1) + b(b-1) + (b-1)c + ac + bc + (c-1)c
Combining like terms, we get:
a² - a + ab - b + ac - c + ab - b² + bc - b + ac + bc - c² + c
Simplifying further:
a² + ab + ac - a - b - c - b² - c² + 2ab + 2ac - 2b - 2c
Rearranging the terms:
a² + 2ab + ac - a - b - c - b² + 2ac - 2b - c² - 2c
Combining like terms again:
(a² + 2ab + ac - a - b - c) + (-b² + 2ac - 2b) + (-c² - 2c)
Notice that the first term is equal to (a, b, c) since it represents the sum of the original numbers a, b, c.
The second term is equal to (a-1, b, c) since we have subtracted 1 from b.
The third term is equal to (a, b, c-1) since we have subtracted 1 from c.
Therefore, the right-hand side simplifies to:
(a, b, c) + (a-1, b, c) + (a, b, c-1)
(b) Combinatorial Proof:
Let's consider a combinatorial interpretation of the equation a+b+c=n. Suppose we have n distinct objects and we want to partition them into three groups: Group A with a objects, Group B with b objects, and Group C with c objects.
On the left-hand side, n-1 (a, b, c), we are selecting n-1 objects to distribute among the groups. This means we have n-1 objects to distribute among a+b+c-1 spots (since we have a+b+c total objects and we are leaving one spot empty).
Now, let's look at the right-hand side:
(a-1, b, c) + (a, b-1, c) + (a, b, c-1)
For (a-1, b, c), we are selecting a-1 objects to distribute among a+b+c-1 spots, leaving one spot empty in Group A.
For (a, b-1, c), we are selecting b-1 objects to distribute among a+b+c-1 spots, leaving one spot empty in Group B.
For (a, b, c-1), we are selecting c-1 objects to distribute among a+b+c-1 spots, leaving one spot empty in Group C.
The sum of these three expressions represents selecting n-1 objects to distribute among a+b+c-1 spots, leaving one spot empty.
Hence, we have shown that n-1 (a, b, c) = (a-1, b, c) + (a, b-1, c) + (a, b, c-1) by a combinatorial proof.
To know more about equation:
https://brainly.com/question/10724260
#SPJ4
This table shows how many sophomores and juniors attended two school events.
Jazz band concert Volleyball game Total
Sophomore 35 42 77
Junior 36 24 60
Total 71 66 137
What is the probability that a randomly chosen person from this group is a junior and attended the volleyball game?
Round your answer to two decimal places.
A) 0.44
B) 0.26
C) 0.18
D) 0.48
The probability that a randomly chosen person from this group is a junior and attended the volleyball game is: 0.18. Option C is correct.
We have,
Probability can be defined as the ratio of favorable outcomes to the total number of events.
Here,
There are a total of 77 + 60 = 137 students in the group.
Out of these students, 24 Junior attended the volleyball game.
So the probability of a randomly chosen person from this group being a Junior and attending the volleyball game is:
P(Junior and volleyball) = 24/137
Therefore, the probability is approximately 0.18. Option C is correct.
Learn more about probability here:
brainly.com/question/14290572
#SPJ12
each unit in the coordinate plane represents 1 foot. find the width of the sculpture at a height of 2 feet. (round your answer to three decimal places.)
The width of the sculpture at a height of 2 feet is 2 feet (rounded to three decimal places).
First, let's plot the points on the coordinate plane. We will have two points: Point A and Point B. The x-coordinate of both points will be the same as we are only interested in the width of the sculpture at a height of 2 feet. The y-coordinate of Point A will be 0 feet (as the sculpture is resting on the ground) and the y-coordinate of Point B will be 4 feet (as the height of the sculpture is 6 feet).Let the x-coordinate of Point A and Point B be x feet. So, the coordinates of Point A will be (x, 0) and the coordinates of Point B will be (x, 4). The length of the sculpture will be the distance between Point A and Point B, which is equal to 6 feet.Using the distance formula, the length of the sculpture (between Point A and Point B) can be expressed as:\[\sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}\]Substituting the values of the coordinates of Point A and Point B in the distance formula, we get:\[\sqrt{(x - x)^2 + (4 - 0)^2}\]Simplifying, we get:\[\sqrt{0 + 16} = 4\]
Now, to find the width of the sculpture at a height of 2 feet, we need to find the distance between the points (x, 2) and (x, 4).Using the distance formula, we get:\[\sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}\]Substituting the values of the coordinates of the points, we get:\[\sqrt{(x - x)^2 + (4 - 2)^2}\]Simplifying, we get:\[\sqrt{0 + 4} = 2\]Therefore, the width of the sculpture at a height of 2 feet is 2 feet (rounded to three decimal places).
To know more about distance formula visit:
https://brainly.com/question/25841655
#SPJ11
.Identify any solutions to the system shown here. 2x+3y > 6
3x+2y < 6
A. (1,5,1)
B. (0,5,2)
C. (-1,2,5)
D. (-2,4)
We can see that point (-2, 4) lies inside the shaded region, and hence, it is a solution to the given system. Therefore, the correct option is D. (-2, 4).
The given system of equations is:
2x + 3y > 6 (1)3x + 2y < 6 (2)
In order to identify the solutions to the given system, we will first solve each of the given inequalities separately.
Solution of the first inequality:
2x + 3y > 6 ⇒ 3y > –2x + 6 ⇒ y > –2x/3 + 2
The graph of the first inequality is shown below:
As we can see from the above graph, the region above the line y = –2x/3 + 2 satisfies the first inequality.
Solution of the second inequality:3x + 2y < 6 ⇒ 2y < –3x + 6 ⇒ y < –3x/2 + 3
The graph of the second inequality is shown below:
As we can see from the above graph, the region below the line y = –3x/2 + 3 satisfies the second inequality.
The solution to the system is given by the region that satisfies both the inequalities, which is the shaded region below:
We can see that point (-2, 4) lies inside the shaded region, and hence, it is a solution to the given system.
Therefore, the correct option is D. (-2, 4).
Know more about points here:
https://brainly.com/question/40140
#SPJ11
The given system of inequalities doesn't have a solution among the provided options. In addition, the provided solutions seem to be incorrect because they consist of three numbers whereas the system is in two variables.
Explanation:To solve this system, we will begin by looking at each inequality separately. Starting with 2x + 3y > 6, we need to find the values of x and y that satisfy this inequality. Similarly, for the second inequality, 3x + 2y < 6, we need to find the values of x and y that meet this requirement. A common solution for both inequalities would be the solution of the system. Yeah, None of the given options satisfy both inequalities, so we can't find a common solution in the options provided.
It's important to notice that the values in the options are trios while the system is in two variables (x and y). Therefore, none of these options can serve as a solution for the system. The coordinates should only contain two values (x, y), one value for x and another for y.
Learn more about System of inequalities here:https://brainly.com/question/6908880
#SPJ12
If sin(x) = − 20/29 and x is in quadrant III, find the exact values of the expressions without solving for x. (a) sin(x/2) (b) cos(x/2) (c) tan (x/2)
The exact values of the expressions is (a) sin(x/2) = ±√(4/29)(b) cos(x/2)
= ±√(25/29)(c) tan(x/2)
= −2/5.
Given that sin(x) = − 20/29 and x is in quadrant III.
We are to find the exact values of the expressions without solving for x. (a) sin(x/2) (b) cos(x/2) (c) tan (x/2).
As we know that x is in quadrant III, sin(x) is negative because in this quadrant, the sine is negative. We are given sin(x) = − 20/29.
Using the formula of half-angle identity
sin(x/2) = ±√[(1 - cos(x))/2]cos(x/2)
= ±√[(1 + cos(x))/2]tan(x/2)
= sin(x)/[1 + cos(x)]
Substituting the value of sin(x) = − 20/29 in the above formulas, we have;
sin(x/2) = ±√[(1 - cos(x))/2]sin(x/2)
= ±√[(1 - cos(x))/2]sin(x/2)
= ±√[(1 - √[1 - sin²x])/2]sin(x/2)
= ±√[(1 - √[1 - (−20/29)²])/2]sin(x/2)
= ±√[(1 - √[1 - 400/841])/2]sin(x/2)
= ±√[(1 - √(441/841))/2]sin(x/2)
= ±√[(1 - 21/29)/2]sin(x/2)
= ±√[(29 - 21)/58]sin(x/2)
= ±√(8/58)sin(x/2)
= ±√(4/29)cos(x/2)
= ±√[(1 + cos(x))/2]cos(x/2)
= ±√[(1 + cos(x))/2]cos(x/2)
= ±√[(1 + √[1 - sin²x])/2]cos(x/2)
= ±√[(1 + √[1 - (−20/29)²])/2]cos(x/2)
= ±√[(1 + √(441/841))/2]cos(x/2)
= ±√[(1 + 21/29)/2]cos(x/2)
= ±√[(50/29)/2]cos(x/2)
= ±√(25/29)tan(x/2)
= sin(x)/[1 + cos(x)]tan(x/2)
= (−20/29)/[1 + cos(x)]tan(x/2)
= (−20/29)/[1 + √(1 - sin²x)]tan(x/2)
= (−20/29)/[1 + √(1 - (−20/29)²)]tan(x/2)
= (−20/29)/[1 + √(441/841)]tan(x/2)
= (−20/29)/[1 + 21/29]tan(x/2)
= (−20/29)/(50/29)tan(x/2)
= −20/50tan(x/2)
= −2/5
To know more about expressions visit:
https://brainly.com/question/28170201
#SPJ11
Consider a population where 52% of observations possess a desired characteristic. Furthermore, consider the sampling distribution of a sample proportion with a sample size of n = 397. Use this informa
The standard error for the sample proportion can be calculated using the formula sqrt((0.52*(1-0.52))/397).
In the given population, the proportion of observations with the desired characteristic is 52%. When sampling from this population with a sample size of n = 397, the sampling distribution of the sample proportion can be approximated by a normal distribution.
The mean of the sampling distribution will be equal to the population proportion, which is 52%. The standard deviation of the sampling distribution, also known as the standard error, can be calculated using the formula sqrt((p*(1-p))/n), where p is the population proportion and n is the sample size. Using the given information, the standard error can be computed.
To learn more about “distribution” refer to the https://brainly.com/question/27905732
#SPJ11
3 Taylor, Passion Last Saved: 1:33 PM The perimeter of the triangle shown is 17x units. The dimensions of the triangle are given in units. Which equation can be used to find the value of x ? (A) 17x=30+7x
The equation that can be used to find the value of x is (A) 17x = 30 + 7x.
To find the value of x in the given triangle, we can use the equation that represents the perimeter of the triangle. The perimeter of a triangle is the sum of the lengths of its three sides.
Let's assume that the lengths of the three sides of the triangle are a, b, and c. According to the given information, the perimeter of the triangle is 17x units.
Therefore, we can write the equation as:
a + b + c = 17x
Now, if we look at the options provided, option (A) states that 17x is equal to 30 + 7x. This equation simplifies to:
17x = 30 + 7x
By solving this equation, we can determine the value of x.
Learn more about triangle
brainly.com/question/29083884
#SPJ11
Find the average rate of change of the function f ( x ) = 9 3 x - 1 , on the interval x ∈ [-1,5]. Average rate of change = Give an exact answer.
The average rate of change of the function f(x) = (9/3)x - 1 on the interval x ∈ [-1, 5] is 3.
To find the average rate of change, we need to determine the difference in the function values at the endpoints of the interval and divide it by the difference in the corresponding x-values.
The function values at the endpoints are:
f(-1) = (9/3)(-1) - 1 = -3 - 1 = -4
f(5) = (9/3)(5) - 1 = 15 - 1 = 14
The corresponding x-values are -1 and 5.
The difference in function values is 14 - (-4) = 18, and the difference in x-values is 5 - (-1) = 6.
Hence, the average rate of change is:
Average rate of change = (f(5) - f(-1)) / (5 - (-1)) = 18 / 6 = 3.
Therefore, the exact average rate of change of the function f(x) = (9/3)x - 1 on the interval x ∈ [-1, 5] is 3.
To learn more about average rate visit:
brainly.com/question/32208982
#SPJ11
suppose f(x,y,z)=x2 y2 z2 and w is the solid cylinder with height 5 and base radius 5 that is centered about the z-axis with its base at z=−1. enter θ as theta.
Suppose [tex]f(x,y,z)=x²y²z²[/tex] and w is the solid cylinder with height 5 and base radius 5 that is centered about the z-axis with its base at z = −1.
Let us evaluate the triple integral[tex]∭w f(x, y, z) dV[/tex]by expressing it in cylindrical coordinates.
The cylindrical coordinates of a point in three-dimensional space are represented by (r, θ, z).Here, the base of the cylinder is at z = -1, and the cylinder is symmetric about the z-axis. As a result, the range for z is -1 ≤ z ≤ 4. Because the cylinder is centered about the z-axis, the range of θ is 0 ≤ θ ≤ 2π.
The radius of the cylinder is 5 units, and it is centered about the z-axis. As a result, r ranges from 0 to 5.
To know more about radius visit:
https://brainly.com/question/13449316
#SPJ11
Find the area of the surface.
The helicoid (or spiral ramp) with vector equation r(u, v) = u cos v i + u sin v j + v k, 0 ≤ u ≤ 1, 0 ≤ v ≤ π
To find the area of the surface, we can use the surface area formula for a parametric surface given by r(u, v):
A = ∬√[ (∂r/∂u)² + (∂r/∂v)² + 1 ] dA
where ∂r/∂u and ∂r/∂v are the partial derivatives of the vector function r(u, v) with respect to u and v, and dA is the area element in the u-v coordinate system.
In this case, the vector equation of the helicoid is r(u, v) = u cos(v) i + u sin(v) j + v k, with the given parameter ranges 0 ≤ u ≤ 1 and 0 ≤ v ≤ π.
Taking the partial derivatives, we have:
∂r/∂u = cos(v) i + sin(v) j + 0 k
∂r/∂v = -u sin(v) i + u cos(v) j + 1 k
Plugging these values into the surface area formula and integrating over the given ranges, we can calculate the surface area of the helicoid. However, this process involves numerical calculations and may not yield a simple closed-form expression.
Hence, the exact value of the surface area of the helicoid in this case would require numerical evaluation using appropriate numerical methods or software.
To know more about derivatives visit-
brainly.com/question/31952261
#SPJ11
please help
Given a normal distribution with µ =4 and a -2, what is the probability that Question: Between what two X values (symmetrically distributed around the mean) are 95 % of the values? Instructions Pleas
Approximately 95% of the values in a normal distribution with a mean of 4 and a standard deviation of 2 fall between X ≈ 0.08 and X ≈ 7.92.
Let's follow the instructions step by step:
1. Draw the normal curve:
_
/ \
/ \
2. Insert the mean and standard deviation:
Mean (µ) = 4
Standard Deviation (σ) = -2 (assuming you meant 2 instead of "a -2")
_
/ \
/ 4 \
3. Label the area of 95% under the curve:
_
/ \
/ 4 \
_________________
| |
| |
| |
| |
| |
| |
| |
|_________________|
4. Use Z to solve the unknown X values (lower X and Upper X):
We need to find the Z-scores that correspond to the cumulative probability of 0.025 on each tail of the distribution. This is because 95% of the values fall within the central region, leaving 2.5% in each tail.
Using a standard normal distribution table or calculator, we can find that the Z-score corresponding to a cumulative probability of 0.025 is approximately -1.96.
To find the X values, we can use the formula:
X = µ + Z * σ
Lower X value:
X = 4 + (-1.96) * 2
X = 4 - 3.92
X ≈ 0.08
Upper X value:
X = 4 + 1.96 * 2
X = 4 + 3.92
X ≈ 7.92
Therefore, between X ≈ 0.08 and X ≈ 7.92, approximately 95% of the values will fall within this range in a normal distribution with a mean of 4 and a standard deviation of 2.
To know more about the Z-scores refer here :
https://brainly.com/question/30557336#
#SPJ11
Complete question :
Given a normal distribution with µ =4 and a -2, what is the probability that Question: Between what two X values (symmetrically distributed around the mean) are 95 % of the values? Instructions Please don't simply state the results. 1. Draw the normal curve 2. Insert the mean and standard deviation 3. Label the area of 95% under the curve 4. Use Z to solve the unknown X values (lower X and Upper X)
Please check within the next 20 minutes, Thanks!
Use the given minimum and maximum data entries, and the number of classes, to find the class width, the lower class limits, and the upper class limits. minimum = 21, maximum 122, 8 classes The class w
For a given minimum of 21, maximum of 122, and eight classes, the class width is approximately 13. The lower class limits are 21-33, 34-46, 47-59, 60-72, 73-85, 86-98, 99-111, and 112-124. The upper class limits are 33, 46, 59, 72, 85, 98, 111, and 124.
To find the class width, we need to subtract the minimum value from the maximum value and divide it by the number of classes.
Class width = (maximum - minimum) / number of classes
Class width = (122 - 21) / 8
Class width = 101 / 8
Class width = 12.625
We round up the class width to 13 to make it easier to work with.
Next, we need to determine the lower class limits for each class. We start with the minimum value and add the class width repeatedly until we have all the lower class limits.
Lower class limits:
Class 1: 21-33
Class 2: 34-46
Class 3: 47-59
Class 4: 60-72
Class 5: 73-85
Class 6: 86-98
Class 7: 99-111
Class 8: 112-124
Finally, we can find the upper class limits by adding the class width to each lower class limit and subtracting one.
Upper class limits:
Class 1: 33
Class 2: 46
Class 3: 59
Class 4: 72
Class 5: 85
Class 6: 98
Class 7: 111
Class 8: 124
To know more about lower class limits refer here:
https://brainly.com/question/31059294#
#SPJ11
Assume you have been recently hired by the Department of
Transportation (DoT) to analyze motorized vehicle traffic flows.
Your initial goal is to analyze the traffic and traffic delays in a
large metr
As a newly hired analyst by the Department of Transportation (DoT) to analyze motorized vehicle traffic flows, my initial goal is to analyze the traffic and traffic delays in a large metropolitan area.
I would begin by collecting data on the number of vehicles on the road at different times of the day, traffic speed, traffic volume, and any other factors that may influence traffic. Analyzing this data will help me identify patterns and trends in traffic flows and identify areas where there may be delays. I would also consider factors such as road conditions, weather, and construction sites, which can affect traffic flows. After analyzing the data, I would create a report that highlights the key findings and recommendations to reduce traffic delays and improve traffic flows in the area. This report would be shared with the Department of Transportation (DoT) and other stakeholders to help inform future traffic management strategies.
To know more about traffic visit:
https://brainly.com/question/29989882
#SPJ11
Question 2 1 pts For right-tail test of significance, greater test z-value we get means stronger evidence against the null hypothesis in favor of the alternative hypothesis. True False
In a right-tailed test, a higher test z-value provides stronger evidence against the null hypothesis in favor of the alternative hypothesis. True.
In a right-tailed test of significance, a larger test z-value corresponds to stronger evidence against the null hypothesis and in favor of the alternative hypothesis.
The test z-value is computed by comparing the observed sample statistic to the hypothesized value under the null hypothesis, and it measures the distance between the sample data and the null hypothesis. As the test z-value increases, it indicates that the observed sample data deviates further from the null hypothesis and provides stronger evidence to reject the null hypothesis in favor of the alternative hypothesis.
Therefore, a greater test z-value indicates a higher level of statistical significance and greater support for the alternative hypothesis. Hence, the statement is true.
To learn more about the “null hypothesis” refer to the https://brainly.com/question/4436370
#SPJ11
please help me :( i don't understand how to do this problem
-5-(10 points) Let X be a binomial random variable with n=4 and p=0.45. Compute the following probabilities. -a-P(X=0)= -b-P(x-1)- -c-P(X=2)- -d-P(X ≤2)- -e-P(X23) - W
The probability of X = 0 for a binomial random variable with n = 4 and p = 0.45 is approximately 0.0897.
To compute the probability of X = 0 for a binomial random variable, we can use the probability mass function (PMF) formula:
[tex]P(X = k) = C(n, k) * p^k * (1 - p)^(n - k)[/tex]
Where:
- P(X = k) is the probability of X taking the value k.
- C(n, k) is the binomial coefficient, given by C(n, k) = n! / (k! * (n - k)!).
- n is the number of trials.
- p is the probability of success on each trial.
- k is the desired number of successes.
In this case, we have n = 4 and p = 0.45. We want to find P(X = 0), so k = 0. Plugging in these values, we get:
[tex]P(X = 0) = C(4, 0) * 0.45^0 * (1 - 0.45)^(4 - 0)[/tex]
The binomial coefficient C(4, 0) is equal to 1, and any number raised to the power of 0 is 1. Thus, the calculation simplifies to:
[tex]P(X = 0) = 1 * 1 * (1 - 0.45)^4P(X = 0) = 1 * 1 * 0.55^4P(X = 0) = 0.55^4[/tex]
Calculating this expression, we find:
P(X = 0) ≈ 0.0897
Therefore, the probability of X = 0 for the binomial random variable is approximately 0.0897.
To know more about binomial random variable refer here:
https://brainly.com/question/31311574#
#SPJ11
Suppose A is an n x n matrix and I is then x n identity matrix. Which of the below is/are not true? A A nonzero vector x in R" is an eigenvector of A if it maps onto a scalar multiple of itself under the transformation T: x - Ax. B. A scalar , such that Ax = ax for a nonzero vector x, is called an eigenvalue of A. A scalar , is an eigenvalue of A if and only if (A - 11)X = 0 has a nontrivial solution. D. A scalar , is an eigenvalue of A if and only if (A - ) is invertible. The eigenspace of a matrix A corresponding to an eigenvalue is the Nul (A-X). F. The standard matrix A of a linear transformation T: R2 R2 defined by T(x) = rx (r > 0) has an eigenvaluer; moreover, each nonzero vector in R2 is an eigenvector of A corresponding to the eigenvaluer. E
Each nonzero vector in R2 is an eigenvector of A corresponding to the eigenvalue r. The answer is option D.
A nonzero vector x in R" is an eigenvector of A if it maps onto a scalar multiple of itself under the transformation T: x - Ax is true.
A scalar, such that Ax = ax for a nonzero vector x, is called an eigenvalue of A is also true. A scalar is an eigenvalue of A if and only if (A - 11)X = 0 has a nontrivial solution is true. A scalar λ is an eigenvalue of A if and only if (A - λI) is invertible is not true.
The eigenspace of a matrix A corresponding to an eigenvalue is the Nul(A-λ). The standard matrix A of a linear transformation T: R2R2 defined by T(x) = rx (r > 0) has an eigenvalue r; moreover, each nonzero vector in R2 is an eigenvector of A corresponding to the eigenvalue r. The answer is option D.
Note:Eigenvalue and eigenvector are important concepts in linear algebra. In applications, the most interesting aspect is that these can be used to understand real-life phenomena, such as oscillations. Moreover, eigenvalues and eigenvectors can also be used to solve differential equations, both linear and nonlinear ones.
Know more about eigenvector here,
https://brainly.com/question/31669528
#SPJ11
on the interval [pi,2pi], the function values of the cosine function increase from ___ to ___
On the interval [π, 2π], the function values of the cosine function increase from -1 to 1.
The cosine function, denoted as cos(x), is a periodic function that oscillates between -1 and 1 as the angle increases. The period of the cosine function is 2π, which means it repeats its pattern every 2π radians.
At the starting point of the interval, which is π, the cosine function takes the value of -1. As the angle increases within the interval, the cosine function gradually increases, reaching its maximum value of 1 at 2π.
To visualize this, imagine a unit circle centered at the origin. At the angle of π, which is the point opposite to the positive x-axis, the cosine function is -1. As we move counterclockwise around the unit circle, the cosine function increases until it reaches 1 at the angle of 2π, which corresponds to a complete revolution around the circle.
Therefore, on the interval [π, 2π], the function values of the cosine function increase from -1 to 1, representing a full cycle of the cosine function from its minimum to its maximum value within that interval.
To know more about Value visit-
brainly.com/question/30760879
#SPJ11
A spring has a natural length of 16 cm. Suppose a 21 N force is required to keep it stretched to a length of 20 cm. (a) What is the exact value of the spring constant (in N/m)? k= N/m (b) How much work w lin 1) is required to stretch it from 16 cm to 18 cm? (Round your answer to two decimal places.)
The work done in stretching the spring from 16 cm to 18 cm is 0.10 J.
Calculation of spring constant The given spring has a natural length of 16 cm. When it is stretched to 20 cm, a force of 21 N is required. We know that the spring constant is given by the force required to stretch a spring per unit of extension. It can be calculated as follows; k = F / x where k is the spring constant F is the force required to stretch the spring x is the extension produced by the force Substituting the given values in the above formula, we get; k = 21 N / (20 cm - 16 cm) = 5 N/cm = 500 N/m Therefore, the exact value of the spring constant is 500 N/m.(b) Calculation of work done in stretching the spring from 16 cm to 18 cm The work done in stretching a spring from x1 to x2 is given by the area under the force-extension graph from x1 to x2.
The force-extension graph for a spring is a straight line passing through the origin with a slope equal to the spring constant. As we know that W = 1/2kx²The extension produced in stretching the spring from 16 cm to 18 cm is:x2 - x1 = 18 cm - 16 cm = 2 cm The work done in stretching the spring from 16 cm to 18 cm is given by:W = (1/2)k(x2² - x1²) = (1/2)(500 N/m)(0.02 m)² = 0.10 J.
To know more about spring visit:-
https://brainly.com/question/29975736
#SPJ11
6. Convert each of the following equations from polar form to rectangular form. a) r² = 9 b) r = 7 sin 0.
The rectangular form of the equation r = 7 sin θ is: x² + y² = (7 sin θ)², x = 7 sin θ cos θ. Conversion of polar form equation r² = 9 to rectangular form: In polar coordinates, a point (r, θ) in the polar plane is given by r = the distance from the origin to the point, and θ = the angle measured counterclockwise from the positive x-axis to the point.
a) Conversion of polar form equation r² = 9 to rectangular form: In polar coordinates, a point (r, θ) in the polar plane is given by r = the distance from the origin to the point, and θ = the angle measured counterclockwise from the positive x-axis to the point. To convert the polar form equation r² = 9 to rectangular form, we use the conversion formulae:
r = √(x² + y²), θ = tan⁻¹(y/x)
where x and y are rectangular coordinates. Hence, we obtain: r² = 9 ⇒ r = ±3
We take the positive value because the radius cannot be negative. Substituting this value of r in the above conversion formulae, we get: x² + y² = 3², y/x = tan θ ⇒ y = x tan θ
Putting the value of y in the equation x² + y² = 3², we get: x² + x² tan² θ = 3² ⇒ x²(1 + tan² θ) = 3²⇒ x² sec² θ = 3²⇒ x = ±3sec θ
Again, we take the positive value because x cannot be negative. Therefore, the rectangular form of the equation r² = 9 is: x² + y² = 9, y = x tan θ isx² + (x² tan² θ) = 9⇒ x²(1 + tan² θ) = 9⇒ x² sec² θ = 9⇒ x = 3 sec θ.
b) Conversion of polar form equation r = 7 sin θ to rectangular form: In polar coordinates, the conversion formulae from rectangular to polar coordinates are: r = √(x² + y²), θ = tan⁻¹(y/x)
Hence, we obtain: r = 7 sin θ = y ⇒ y² = 49 sin² θ
We substitute this value of y² in the equation x² + y² = r², which gives: x² + 49 sin² θ = (7 sin θ)²⇒ x² = 49 sin² θ - 49 sin² θ⇒ x² = 49 sin² θ (1 - sin² θ)⇒ x² = 49 sin² θ cos² θ⇒ x = ±7 sin θ cos θ
Again, we take the positive value because x cannot be negative. Therefore, the rectangular form of the equation r = 7 sin θ is: x² + y² = (7 sin θ)², x = 7 sin θ cos θ.
Conversion of equations from polar form to rectangular form is an essential process in coordinate geometry. In polar coordinates, a point (r, θ) in the polar plane is given by r = the distance from the origin to the point, and θ = the angle measured counterclockwise from the positive x-axis to the point. On the other hand, in rectangular coordinates, a point (x, y) in the rectangular plane is given by x = the distance from the point to the y-axis, and y = the distance from the point to the x-axis. To convert the polar form equation r² = 9 to rectangular form, we use the conversion formulae:
r = √(x² + y²), θ = tan⁻¹(y/x)
where x and y are rectangular coordinates. Similarly, to convert the polar form equation r = 7 sin θ to rectangular form, we use the conversion formulae: r = √(x² + y²), θ = tan⁻¹(y/x)
Here, we obtain: r = 7 sin θ = y ⇒ y² = 49 sin² θ
We substitute this value of y² in the equation x² + y² = r², which gives: x² + 49 sin² θ = (7 sin θ)²⇒ x² = 49 sin² θ - 49 sin² θ⇒ x² = 49 sin² θ (1 - sin² θ)⇒ x² = 49 sin² θ cos² θ⇒ x = ±7 sin θ cos θ
Again, we take the positive value because x cannot be negative. Therefore, the rectangular form of the equation r = 7 sin θ is: x² + y² = (7 sin θ)², x = 7 sin θ cos θ.
To know more about polar coordinates visit: https://brainly.com/question/31904915
#SPJ11
Use the following cell phone airport data speeds (Mbps) from a particular network. Find the percentile corresponding to the data speed 8 2 Mbps, rounding to the nearest whole number. 0.1 0.2 0.2 0.3 0
The percentile corresponding to the data speed 8.2 Mbps, rounding to the nearest whole number is 95. Percentile is used in statistics to give you a number that describes the value below which a given percentage of observations in a group falls.
To calculate the percentile, follow the given steps:
Step 1: Sort the data in ascending order.
Step 2: Find the position of the data value, say "a", in the data set. The position of "a" is the index number of "a" in the data set.
Step 3: Calculate the percentile as follows: Percentile = [tex]$\frac{Position \ of \ a}{Total \ number \ of \ data} × 100$[/tex]
Percentile = [tex]$\frac{4}{5} × 100$[/tex]
Percentile = 80
Therefore, the percentile corresponding to the data speed 8.2 Mbps, rounding to the nearest whole number is 80.
However, as there are two 0.2s, we will assume that the one given first in the list is position 2 and the one given second is position 3. Also, 8.2 Mbps is the 4th value in the list, which means the position of 8.2 Mbps is 4.
So, the percentile can be calculated as follows:
Percentile = [tex]$\frac{Position \ of \ 8.2 \ Mbps}{Total \ number \ of \ data} × 100$[/tex]
Percentile = [tex]$\frac{4}{5} × 100$[/tex]
Percentile = 80
Therefore, the percentile corresponding to the data speed 8.2 Mbps, rounding to the nearest whole number is 80.
To know more about Percentile, visit
https://brainly.com/question/2416601
#SPJ11
in this diagram bac = edf if the area of bac=15in what is the area of edf
In the diagram the area of edf is 15 sq. in.
In the given diagram bac = edf, and the area of bac is 15 in. Now we need to determine the area of edf.Using the area of a triangle formula:Area of a triangle = 1/2 × Base × Height
We know that both triangles have the same base (ac).Therefore, to find the area of edf, we need to find the height of edf.In triangle bac, we can find the height as follows:
Area of bac = 1/2 × ac × height
bac15 = 1/2 × ac × height
bac30 = ac × heightbacHeightbac = 30 / ac
Now that we have the heightbac, we can use it to find the area of edf as follows:
Area of edf = 1/2 × ac × heightedfArea of edf = 1/2 × ac × heightbacArea of edf = 1/2 × ac × 30/ac
Area of edf = 15
To know more about triangles :
https://brainly.com/question/2773823
#SPJ11
