Answer:
F = E q
E = 2.18E-14 / 1.6E-19 = 1.36E5 N/C
The direction of the field will be the same as force on the proton - southerly
Alex is x years old . June is 7years older than Alex . their total combined ages is 29 years . find June,s age . show all work algebraically
Answer:
18 yearsExplanation:
Given,
Let Alex be = x years
Then June will be = (7 + x) years
We know that,
Their total combined age is 29 years
Therefore,
By the problem,
=> x + (7 + x) = 29
=> 2x = 29 - 7
=> 2x = 22
=> x = 22 ÷ 2
=> x = 11
So,
Required age of June is = (7 + x) years
= (7 + 11) years
= 18 years (Ans)
Which statement about RNA polymerase is NOT true?
RNA polymerase reads a template strand of DNA 5' to 3'
RNA polymerase binds to a promoter region to initiate transcription
RNA polymerase adds a ribonucleotide to the 3' end of a growing RNA molecule
During transcription of a gene, RNA polymerase reads only one strand of DNA
Please explain!
Answer:
RNA polymerase reads a template strand of DNA 5' to 3'
Explanation:
RNA polymerase is the enzyme accountable for the transcription of the DNA. It shows one coast of the DNA and transcribed within the RNA. It combines the nucleotide to the 3' conclusion of the expanding series of the RNA. It commences the method by connecting to the promoter area of the gene. The enzyme increases nucleotide, not ribonucleotide.
Therefore, A. RNA polymerase reads a template strand of DNA 5' to 3' is false.
Answer:
RNA polymerase reads a template strand of DNA 5' to 3'.
Explanation:
RNA synthesis is less processive during elongation than during initiation. Synthesis begins with the polymerase binding two rNTP molecules. The polymerase frequently releases the nascent transcript before it reaches 8-10 nucleotides in length.
PLEASE PLEASE HELP!!
An arrow is shot straight up in the air from the ground with an initial velocity of 54.0 m/s. If on striking the ground it
embeds itself 15.0 cm into the ground, what is the acceleration required to stop the arrow when it hits the ground?
Answer:
you have patience the distance.
Explanation:
the train leaves at 6.30.
Define average atomic mass and explain how it is calculated
Answer:
The average atomic mass of an element is the sum of masses of it's isotopes
Each are multiplied by it's natural abundance
Explanation:
The average atomic mass of an element is the sum of masses of it's isotopes
Each are multiplied by it's natural abundance
5. A quarterback throws the football to a stationary receiver who is 31.5 m
down the field. If the football is thrown at an initial angle of 40.0° to the
ground, at what initial speed must the quarterback throw the ball for it
to reach the receiver? What is the ball's highest point during its flight?
The projectile launch equations allow to find the results for the questions about the movement of the ball are:
The initial velocity is: v₀ = 17.7 m / s. The maximum height is: y = 16 m.
Given parameters
Horizontal distance x = 31.5 m Launch angle tea = 40ºTo find
The initial speed. Maximum height.
Projectile launching is an application of kinematics, where on the x-axis there is no acceleration and on the y-axis is the gravity acceleration.
The range is the distance traveled for the same departure height, see attached.
.
R =[tex]\frac{v_o^2 \ sin 2\theta}{g}[/tex]
[tex]v_o^2 = \frac{ g R}{sin 2 \theta }[/tex]
Let's calculate.
v₀² = [tex]\frac{9.8 \ 31.5}{sin \ (2 \ 40)}[/tex]9.8 31.5 / sin (2 40.0)
[tex]v_o = \sqrt{313.46}[/tex]o = ra 313.46
v₀ = 17.7 m / s
At the point of maximum height the vertical speed is zero.
v² = v₀² - 2 g y
0 = v₀² - 2g y
y = [tex]\frac{v_o^2}{2g}[/tex]
Let's calculate.
y = [tex]\frac{17.7^2}{2 \ 9.8}[/tex]
y = 16 m
In conclusion, using the projectile launch equations we can find the results for the questions about the movement of the ball are:
The initial velocity is: v₀ = 17.7 m / s The maximum height is: y = 16 m.
Learn more here: brainly.com/question/10903823
A meter stick is attached to one end of a rigid rod with negligible mass of length l = 0.302 m. The other end of the light rod is suspended from a pivot point, as shown in the figure below. The entire system is pulled to a small angle and released from rest. It then begins to oscillate. A meter stick hung from a rod of length l. The rod is attached to the ceiling. The rod and meter stick extend downward in a straight line making a small angle with the vertical. (a) What is the period of oscillation of the system (in s)? (Round your answer to at least three decimal places.)
The period of oscillation of the system nearest to three decimal places
= 1.092 seconds
The period of an oscillation occurring in a system is the time taken to complete one cycle.
The formula that is used to calculate the period of oscillation (T) is
= 2π√[tex]\frac{l}{g}[/tex]
But,
π = 3.14159 (constant)
g= 10m/s² (acceleration due to gravity)
l = 0.302 m
Therefore T = 2 × 3.14159 × √[tex]\frac{0.302}{10}[/tex]
= 6.28318 x √0.0302
= 6.28318 x 0.17378
= 1.09189s
= 1.092 seconds ( to the nearest three decimal places)
Learn more here:
https://brainly.com/question/23752181
what a function of vacuole
Answer:
A vacuole is in both, plant and animal cells. It's main purpose is to isolate waste products, or in other words making sure that harmful materials won't damage the cell.
Answer:
In animal cells, they help sequester waste. In plants, they help maintain water balance.
A photographer wants to determine the color of light he can use in the darkroom that will not expose the films he is processing. In one trial, he used a blue incandescent bulb. Which bulb can he use for another trial?
A. Red incandescent bulb C. Red fluorescent bulb
B. Blue incandescent bulb D. Blue fluorescent bulb
For a photographer that wishes to determine the color of light that he can use in a dark room that will not expose the films he is processing, having used a Blue Incandescent bulb, he should proceed to use a Red Incandescent bulb for the next trial.
The photographer in question is performing an experiment. For these kinds of experiments it is important to identify the variables present, which can be of three kinds:
Control variablesDependent variables Independent variablesFor this experiment, the dependent variable is the exposure of the light onto the films, given that this is what we wish to measure. The independent variable will be the color of the light being used which is what will affect the dependent variable.
The remaining variable must be the control variable. Unlike the previous variables, we can have more than one of these. The control variable is there to make sure that only the dependent variable is affecting the outcome. We do this by keeping the control variable the same through each trial, which is why the photographer should not change the type of bulb in the second experiment, changing only the color of the light.
To learn more visit:
https://brainly.com/question/1549017?referrer=searchResults
Am object of mass in a circular path of radius 100metres with the speed of 10metres/second.calculate the acceleration towards the center
Answer:
is 6
Explanation:
h
The figure shows the light intensity on a screen behind a double slit. The slit spacing is 0.22 mm and the screen is 2.0 m behind the slits (Figure 1). What is the wavelength of the light?
The wavelength of the light is 550 nm
For a double slit interference pattern with slit spacing, d we have
dsinθ = mλ where d = slit spacing = 0.22 mm = 0.22 × 10⁻³ m, m = number of maximum fringe = 2(from the picture) and λ = wavelength of light.
Thus sinθ = mλ/d
Also, tanθ = L/D where L = distance between central maximum and fringe = 2.0 cm/2 = 1.0 cm = 1 × 10⁻² m and D = distance between slit and screen = 2.0 m
Since θ is small, sinθ ≅ tanθ
So, mλ/d = L/D
Making λ subject of the formula, we have
λ = dL/mD
Substituting the values of the variables into the equation, we have
λ = dL/mD
λ = 0.22 × 10⁻³ m × 1 × 10⁻² m/(2 × 2.0 m)
λ = 0.22 × 10⁻⁵ m²/4.0 m
λ = 0.055 × 10⁻⁵ m
λ = 0.55 × 10⁻⁶ m
λ = 550 × 10⁻⁹ m
λ = 550 nm
So, the wavelength of the light is 550 nm
Learn more about double slit interference here:
https://brainly.com/question/4449144
If you do 72 J of work in 1.2 seconds, how much power is produced
Answer:
Explanation:
Power is the rate of doing work
P = 72 / 1.2 = 60 Watts
A hot air balloon rising vertically is tracked by an observer located 2 miles from the lift-off point. At a certain moment, the angle between the observer's line-of-sight and the horizontal is , and it is changing at a rate of 0.1 rad/min. How fast is the balloon rising at this moment
We have that for the Question, it can be said that
the balloon rising at [tex]0.266miles/min[/tex]From the question we are told
An observer located 2 miles from the lift-off point. At a certain moment, the angle between the observer's line-of-sight and the horizontal is , and it is changing at a rate of 0.1 rad/min.From,
[tex]tan\theta = \frac{h}{2}[/tex]
differentiate with respect to h
[tex]sec^2\theta * \frac{do}{dz} = \frac{1}{2} * \frac{dh}{dz}\\\\\frac{dh}{dz} = 2 sec^\theta * \frac{d\theta}{dz}\\\\\theta = \frac{\pi}{6} and \frac{d\theta}{dz} = 0.1rad/min\\\\\frac{dh}{dz} = 2sec^2 (\frac{\pi}{6}) * (0.1)\\\\= 0.266miles/min[/tex]
For more information on this visit
https://brainly.com/question/23379286
What does it mean that " memory is organized in semantic
networks
Answer:
Semantic memory is a category of long-term memory that involves the recollection of ideas, concepts and facts commonly regarded as general knowledge. Examples of semantic memory include factual information such as grammar and algebra.
Required information
Medical testing has established that the maximum acceleration a pilot can be subjected to without losing consciousness is
approximately 5.00g. A pilot can avoid "blackout" at accelerations up to approximately 9.00g by wearing special "g-suits"
that help keep blood pressure in the brain at a sufficient level.
What is the minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop at 729 km/h?
Answer:
hi there is that OK for the weekend of the following week as well
Explanation:
6th of March is fine for me
The minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop at 729 km/h is approximately 838.1 meters.
To determine the minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop, we need to consider the maximum acceleration the pilot can withstand without losing consciousness.
Given:
Maximum acceleration without losing consciousness = 5.00g
Acceleration with g-suits to avoid blackout = 9.00g
First, we need to convert the speed of the F-15 from km/h to m/s:
Speed = 729 km/h = (729 * 1000) m/3600 s ≈ 202.5 m/s
Next, we'll calculate the acceleration experienced by the pilot in the circular loop. In a horizontal circular motion, the centripetal acceleration is given by:
Acceleration = ([tex]\rm Velocity^2[/tex]) / Radius
We can rearrange the equation to solve for the radius:
Radius = ([tex]\rm Velocity^2[/tex]) / Acceleration
Using the maximum acceleration of 5.00g, we convert it to [tex]\rm m/s^2[/tex]:
Maximum acceleration = 5.00g ≈ (5.00 * 9.8) [tex]\rm m/s^2[/tex] = 49 m/s^2
Now, we can calculate the minimum safe radius of curvature:
Radius = ([tex]\rm 202.5^2[/tex]) / 49 ≈ 838.1 meters
Therefore, the minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop at 729 km/h is approximately 838.1 meters.
Know more about radius of curvature:
https://brainly.com/question/30106468
#SPJ4
An object travels 120 m in 6 seconds. How fast is it moving?
Answer:
I actually don't understand what you are asking for....but if you denote second then...
Explanation:
Just divide 120/6=20
Hence, it's traveling 20m per second.
Answer:
20 m/s
Explanation:
Speed = Distance/Time
Speed = 120m/6s
Speed = 20 m/s
I need the answer for this question
Answer:
Since impedance = omega * L we can use the equation for resistance:
20 + 12 + 10 in parallel with 7 we have
J1 = 42 * 7 / 49 = 6 H for the combination on the right
4 H + 6 H + 8 H = 18 H for the entire combination
Do you expect the normal dicrystalline resistance in the forward bias to be pure ohmic resistance or what ?!
Answer:
yes
Explanation:
because is pure ohmic risistance
which of the following is used to transport sound waves
A.medium
B.vacuum
C.mass
D.light
I think the answer is d.right?
A mountain climber encounters a crevasse in an ice field. The opposite side of the crevasse is a height h lower, and is separated horizontally by a distance w. To cross the crevasse, the climber gets a running start and jumps in the horizontal direction. If the height of the crevasse increases but the width remains the same, then,
Select one:
O a. the minimum speed needed to cross the crevasse stays the same.
O b. the minimum speed needed to cross the crevasse will depend on the mass of the mountain climber.
O c. the minimum speed needed to cross the crevasse decreases.
O d. the minimum speed needed to cross the crevasse increases.
O e. the minimum speed needed to cross the crevasse will depend on the weight of the mountain climber.
Acceleration of a car that speeds from 4.3 m/s to 12.9 m/s in 2 seconds
Explanation:
let v1 = 4.3 m/s
v2 = 12.9 m/s
t = 2 seconds
v2 = v1 + at
12.9 = 4.3 + a×2
2a = 12.9 - 4.3 = 8.6
a = 8.6/2
a = 4.3 m/s^2
7 A 0.25 kg block oscillates on the end of a spring with a spring constant of 100 N/m. If the oscillation is started by elongating the spring 0.1m and giving the block a speed of 3 mis then the amplitude of the oscillation is:
Please write a paragraph explaining the bible verse below in your own words.
Exodus 16:1-3
Answer: Moses
Explanation: The Israelites are angry at Aaron and Moses, because they lead them into this desert where there is no food, or water. It was told that after the Israelites left Egypt they would wander the desert for forty years. The Israelites complain that they would have had plenty of food if they had just stayed enslaved in Egypt. They are not grateful that God has liberated them from slavery.
Please help if u can thanksss
Answer:
yes its okay i think so it is the correct answer
PLEASE HELP!!!
If a 40cm rope with a 220g bob can hold a maximum tension of 3N
a) what are the maximum angular velocity and inclination angle it can reach before the rope break?
b) Angle of inclination
Answer:
ω = 3.1 rad/s
θ = 36° from vertical
Explanation:
I will ASSUME that the bob and string is acting as a pendulum.
Please understand that the string will break when the bob is at the lowest point of the swing where the vectors of gravity and centripetal acceleration align. It will NOT break at the angle of maximum inclination measured from vertical. This angle is only a component of the maximum potential energy that gets converted to maximum kinetic energy at the lowest point of the swing.
At the bottom of the swing, the string must support the weight of the bob plus supply the required centripetal acceleration.
F = mg + mω²R
F/m = g + ω²R
F/m - g = ω²R
ω = √((F/m - g)/R)
ω = √((3/0.220 - 9.8)/0.40)
ω = 3.09691...
ω = 3.1 rad/s
Potential energy will convert to kinetic energy
mgh = ½mv²
h = v²/2g
R - Rcosθ = v²/2g
R(1 - cosθ) = v²/2g
1 - cosθ = v²/2gR
cosθ = 1 - v²/2gR
cosθ = 1 - (Rω)²/2gR
cosθ = 1 - Rω²/2g
cosθ = 1 - 0.40(3.1²)/(2(9.8))
cosθ = 0.804267
θ = 36.46045...
θ = 36°
Does the stone remain at a constant speed? Or does it speed up?
Answer:
it would remain the same speed
Explanation: the rock isnt going down a hill or anything so therefore if gravity isnt pulling it down a slope then it would remain the same pace
Which of the following correctly compares gravitational force and distance between two objects?
A. As the distance increases, the gravitational force decreases.
B. As the distance decreases, the gravitational force decreases.
C. There is no relationship between gravitational force and distance between two objects.
D. As the distance increases, the gravitational force increases.
Help pls…
Answer:
a. as the distances increases , the gravitational force decreases
A 770-kg two-stage rocket is traveling at a speed of 6.90×103 m/s away from Earth when a predesigned explosion separates the rocket into two sections of equal mass that then move with a speed of 2.60×103 m/s relative to each other along the original line of motion.What is the speed of each section (relative to Earth) after the explosion?How much energy was supplied by the explosion?
Answer:
Explanation:
Let's just have our reference frame travel along with the original un broken mass. This way the original velocity is not relevant.
Each half will have a mass of 770/2 = 385 kg
Each half will have the same magnitude of velocity (conservation of momentum) which will be 2.6 x 10³/2 = 1.30 x 10³ m/s
Now add back the reference frame velocity to get velocity relative to earth.
Section one will have velocity 6.90 x 10³ + 1.30 x 10³ = 8.2 x 10³ m/s
Section two will have velocity 6.90 x 10³ - 1.30 x 10³ = 5.6 x 10³ m/s
In the moving reference frame, each half will have kinetic energy which could only come from the explosion
KE = ½(385)(1.3 x 10³)² = 325,325,000 J
2(325,325,000) = 650,650,000 J released in the explosion.
Rounding to the three significant figures of the problem numerals
E = 6.50 x 10⁸ J or 650 MJ released
When an elastic object is changed from its original shape:
A:Energy is released
B:Work is done
C:It is ruined
D:It makes a twanging sound
Answer:
deformation : elastic deformation is reversed when the force is removed. inelastic deformation is not fully reversed when the force is removed – there is a permanent change in shape.
Explanation:
tysm
50 points help
Column I Column II
______ 1. acceleration a. change in distance over time
______ 2. speed b. time interval
______ 3. velocity c. scalar
______ 4. Δt. d. change in position
______ 5. Magnitude only e. change in velocity over time
______ 6. Δx f. change in displacement over time
[tex]\\ \sf\longmapsto Acceleration\longrightarrow Change\:in\: Velocity\:over\:time[/tex]
[tex]\\ \sf\longmapsto Speed\longrightarrow Change\:in\: Distance\:over\:Time[/tex]
[tex]\\ \sf\longmapsto Velocity\longrightarrow Change\:in\: Displacement\: over\:time[/tex]
[tex]\\ \sf\longmapsto ∆t\longrightarrow Time\: interval [/tex]
[tex]\\ \sf\longmapsto Magnitude\:only\longrightarrow Scaler[/tex]
[tex]\\ \sf\longmapsto ∆x=Change\:in\: position [/tex]
Describe how you can determine:
a) Volume of an irregular body
b) Density of a liquid
Density of liquid try thank you so much
Answer:
a) measure the change in volume when the object is immersed; compute from range data
b) find the ratio of mass to volume for a measured mass and volume
Explanation:
a) The volume of a small enough irregular body can be found by measuring the difference in volume of the (semi-)fluid in which it is immersed, before and after immersion.
For irregular bodies for which that approach does not work, various 3D scanners are available for measuring volume and surface area. They may rely on optical (laser or camera), sonic, or radar measurements, and generally involve computation from distances to various points.
__
b) Density is the ratio of mass to volume. So, measurements of mass and volume of a liquid sample are sufficient to provide the basis for determining density.
Other methods include measuring buoyancy forces, and/or the depth of submersion of something that floats in the liquid. For specific liquids, hydrometers are available for measuring their density relative to that of water.
