Answer:
Explanation:
1) either all the way to the ground, or, if the cliff is high enough,
h = ½(9.8)1.4² = 9.6 m
2) If the cliff is high enough and we ignore air resistance
v = 9.8(2.7) = 26 m/s
When are theories constructed?
A. after data is collected from an experiment
B. after there is numerous data collected during the experiment
Hi, This is the answer...
Theories are constructed after there is numerous data collected during the experiment.
Hope it helps you...Pls mark brainliest if it helps you....(by Benjemin)
The correct answer is B.
Theories are constructed after there is numerous data collected during the experiment.
Theory construction is simply a process of formulating and bringing together different components of theories into a single form that is more meaningful.
These theories are usually supported by evidence (data) gathered from many experiments.
In addition, these theories may answer the basic questions of our universe such as;
how does nature work? and,why it exhibits certain characteristicsThus, from the given options, only option B matches the above explanations.
"theories are constructed after there is numerous data collected during the experiment"
Learn more here: https://brainly.com/question/13702718
Select the correct answer.
Calculate the force of gravity on a 1–kilogram box located at a point 1.3 × 107 meters from the center of Earth. (The value of G is 6.673 × 10-11 newton meter2/kilogram2. The mass of Earth is 5.98 × 1024 kilograms.)
A.
2.36 newtons
B.
3.58 newtons
C.
4.87 newtons
D.
8.95 newtons
Answer:
A. 2.36 Newtons
Explanation:
F = GmM/d²
F = 6.673 x 10⁻¹¹(1)(5.98 x 10²⁴) / (1.3 x 10⁷)²
F = 2.36121...
Very poor question design.
mass of box... 1 significant digit
distance... 2 significant digits
mass of earth... 3 significant digits
value of G... 4 significant digits
Answer precision to 3 significant digits is not justifiable
What is difference between magnetic flux and magnetic flux linkage?
Answer:
Magnetic flux has formular: BA while Magnetic flux linkage has formula: NBA
Explanation:
N is number of turns of a coil
B is magnetic flux density across the coil
A is area of coil
[tex].[/tex]
a 60g tennis ball travelling at 30m/s hi a wall and bounce back at 20m/s.calculate (a)momentum of the ball before impact (b)momentum of the ball after impact
Explanation:
the formula for momentum is denoted by p=mv where p is momentum, m is mass and v is velocity. thus, the velocity before impact would be 0.060 x 30 = 1.8 kg/ms
the second one would just be 0.060 x 20 0.72kg/ms
I'm not 100 percent sure this is correct but yeah
1. Calculate the height of tree, 250 m away that produces
an image 1.5cm high
in a
pin-hole camera of width 30 cm.
Answer:
Explanation:
1.5/30 = x/250
x = 12.5 m
In Physics what's does cos and sin stand for?
Answer:
Sin = Sine
Cos = Cosine
Explanation:
Sin(θ) = Opposite/Hypotenuse
Cos(θ) = Adjacent/Hypotenuse
poopybutt pickle juice
Answer:
poopybutt pickle juice????? baa?
Explanation:
12
The motion of an object can be described by it
A.
speed.
В.
position.
C.
direction.
D.
all of these
Answer:
D
Explanation:
The motion of an object can be described by its speed, position, and direction so its all of the above
Write a formular to show force experienced by charge in magnetic field.
Answer:
[tex]{ \boxed{ \sf{F = Bev}}}[/tex]
Explanation:
F » Force
B » Magnetic flux density
e » magnitude of charge
v » voltage
Hey Mate A same question here answered by me with proper explanation.Kimdly visit the link below for your answer
https://brainly.com/question/24617743?
Which of the following best represents R=A+B ?
A)
B)
C)
Answer:
C
Explanation:
Options A and B are not even pointing in the direction as the vectors in the question so they shouldn't even be considered.
Option C looks like the closes since vectors A and B are pointing in a similar direction (negative x-axis)
The best representation for the resultant vector representing the resultant R=A+B would be option C because the result is represented by the closing side of the triangle, therefore the correct answer would be C.
What is a vector quantity?The quantities that contain the magnitude of the quantities along with the direction are known as the vector quantities.
Examples of vector quantities are displacement, velocity acceleration, force, etc.
As given in the problem we have to find out the resultant vector from the sum of vector A and vector B,
The resultant of the vector can be calculated with the help of the triangle law of the vector addition in which the sum is given by the closing side of the triangle.
Thus, the correct answer is option C.
To learn more about the vector quantity here, refer to the link;
https://brainly.com/question/15516363
#SPJ2
A stretched rubber band has _________energy
Answer:
A stretched rubber band has potential energy
Answer:
elastic potential energy
Explanation:
Which correctly describes electric potential, electric field, and electric (or electrostatic) force?
a. The potential, the field, and the force are vector quantities.
b. The potential, the field, and the force are scalar quantities.
c. The potential and the field are scalar quantities, and the force is a vector quantity.
d. The potential and the force are vector quantities and the field is a scalar quantity.
e. The potential is a scalar quantity, and the field and the force are vector quantities.
f. The potential and the force are scalar quantities, and the field is a vector quantity
Answer:
E
Explanation:
A vector is a physical quantity that has magnitude and direction while a scalar is a physical quantity that has magnitude only
*electric potential is a scalar quantity because it only has magnitude
*electric field and electric force are vector quantities because they have magnitude and direction
write two differences between practical machine and ideal machine
Answer:
Ideal machines are said to have parts which are weightless , frictionless and strings if any are inextensible. Practical machines have parts which have weights, friction and it causes some loss of work done. So these are the differences between Ideal Machine and Practical Machines.
how far will a rubber ball fall in 10 seconds
what would be the final velocity of this and what would be the average velocity
Answer:
490 meters
Explanation:
hope this helps!
What are the similarities between theory and law ?
A law is created using a theory
Rowenda is stopped on the side of the road. She then starts pedaling her bicycle for 15 seconds. Her final
velocity is 9 m/s. What is her acceleration while she is pedaling?
Explanation:
acceleration = change in velocity / change in time
a = v2-v1
- - - - - -
t
V1 = 0 ( since she stopped)
V2 = 9 m/s
t =15s
a = 9 - 0
- - - -
15
= 0.6m/s^2
A stack of paper contains 500 sheets of paper. The stack has dimensions of 0.297 m x 21.0 cm x 50.0 mm.
A. What is the thickness of one sheet of paper?
B. What is the volume of the stack of paper in cm3?
Answer:
0.1 mm
Explanation:
Given data : A stack of paper contains 500 sheets of paper.
The stack has dimensions of 0.297 m x 21.0 cm x
50.0 mm.
To Find : What is the thickness of one sheet of paper
So,
1 m = 1000 mm
1 m = 100 cm
1 cm = 10 mm
The stack has dimensions of 0.297 m x 21.0 cm x 50.0 mm.
0.297 m = 297 mm
21 cm = 210 m
297 mm * 210 mm are paper length width
Hence 50 mm is thickness of 500 sheets
- thickness of one sheet of paper = 50/500 = 1/10 mm
= 0.1 mm
Hope It Helps :)
The thickness of one sheet of paper would be 62.37 ×10⁻⁶ meters.
The volume of the stack of paper in cm³ would be 0.031185 mm³.
What is multiplication?Finding the product of two or more numbers in mathematics is done by multiplying the numbers. It is one of the fundamental operations in mathematics that we perform on a daily basis.
As given in the problem a stack of paper contains 500 sheets of paper. The stack has dimensions of 0.297 m x 21.0 cm x 50.0 mm.
The volume of the stack = 0.297 m x 21.0 cm x 50.0 mm
= 0.000297 mm×2.1 mm x 50.0 mm
the thickness of one sheet of paper = 0.000297 mm×2.1 mm x 50.0/500mm
=62.37 ×10⁻⁶ meters
The volume of the stack of paper = 31.185 cm³
To learn more about multiplication here, refer to the link;
https://brainly.com/question/10520264
#SPJ2
The pressure of a liquid is given by P = pgh. Calculate the pressure (in SI unit) if the
density of water, p is 1 g cm-, the acceleration due to gravity, g is 10 m s?, and the
height of water, h is 50 cm.
Answer:
5000 Pa
Explanation:
First collect the data you've been given already and make sure to convert into the right units;
Density = 1 g/cm³ ...... 1000 Kg/ m³
acceleration due to gravity = 10 m/s²
Height = 50 cm......0.5 m
after collecting the data, use the formula to solve
pressure = pgh
= 1000 × 10 × 0.5
= 5000 Pa
hope this helps
plz help me with this question
Explanation:
Here,
initial velocity(u)=25m/s
final velocity (v)=0m/s
time taken(t)= 5 second
Now,
why is burning a paper a chemical change
when we burn a paper it undergoes the combustion reaction.
A difference between final and original position in a straight line
Answer:
For straight line motion, positions can be shown using a number line. The separation between original and final position is called displacement.
EXPLANATION:For straight line motion, positions can be shown using a number line. The separation between original and final position is called displacement.
Every mass exerts a gravitational force on every other mass.
a. True
b. False
Answer:
A
Explanation:
newton's law of universal gravitation states that every point mass in the universe attracts every other point mass with a force that is directly proportional to the product of their masses
2. Match the following:
Larva 'of butterfly
10
Earthworm
Sole
Annelida
Vacuoles
Protozoa
Caterpillar
Storage tanks
Give birth to young ones
Dog
Paramecium
Answer:
Tricky man
Explanation:
Very tricky
what is the answer to {36m= ? dm}
Answer:
360
Explanation:
just add a 0 when using dm
What topic name does this equation go into in physics?[tex]A_{x} = A cos\theta[/tex]
Answer:
Trigonometry
Explanation:
[tex] \huge \boxed{\mathfrak{Question} \downarrow}[/tex]
What topic name does this equation go into in physics?[tex]A_{x} = A cos\theta[/tex][tex] \large \boxed{\mathfrak{Answer \: with \: Explanation} \downarrow}[/tex]
[tex] \huge \boxed{\sf \: A_{x} = A cos\theta}[/tex]
So, I think this equation will go under Types of Physical quantities, Vector Quantities, Magnitude, Direction, etc. under physics & Trigonometry under Mathematics.This formula is used when we need to find the 'x' component of the vector. You need to know basic trigonometry to solve these type of equations & also how to convert between magnitude & angles.Which statement is true?
The combustion of biomass can replace fossil fuels in conventional power plants.
Hydroelectric energy uses the energy from the sun, which is a renewable resource.
Oil is a non-renewable resource that is hardly ever used, so there is not a concern of depleting the Earth's supply.
Solar energy is a non-renewable resource that is used by many countries all over the world.
Answer:
Hello,
The combustion of biomass can replace fossil fuels in conventional power plants, which is true.
I hope I helped you :)
A bicyclist steadily speeds up from rest to 6.00m/s in 7.30s.
How far did she travel during this time?
Answer:
21.899 m
Explanation:
The explanation here is a little differe because we are starting from rest. So, everyone does physics a little differently, but what I would start with is trying to find the accelaration. I've given the formula, now you are able to plug this into the displacement formula where you Velocity Initial = 0m/s (Since you are starting from rest) and V final = 6.00 m/s...
You just plug numbers into the formula after solving for accelaration and do some simple algebra! I hope this helps! I am attaching a new pdf for visuals! If you can't open it let me know! Also there is a star by accelaration because I didn't know if I spelled it right, sorry!
image formed in a concave
The following diagram shows a
mirror.
object
image
O A. virtual, enlarged, upright
B. real, reduced, upright
C. virtual, enlarged, inverted
D. real, reduced, inverted
The image formed by the concave mirror is virtual, enlarged, and upright. The correct answer is option A.
A concave mirror is a type of spherical mirror that has a reflecting surface that curves inward, resembling the shape of the inner surface of a sphere. The inner surface of the mirror is reflective, while the outer surface is transparent.
Concave mirrors are also known as converging mirrors because they cause parallel incident light rays to converge or come together after reflection. These mirrors are commonly used in various optical devices, such as telescopes, makeup mirrors, and reflector headlights.
Option A states that the image formed by the concave mirror is virtual, enlarged, and upright. Let's break down what each of these terms means in the context of the image formation by a concave mirror:
1. Virtual: A virtual image is formed when the light rays appear to diverge from a point behind the mirror. It cannot be projected onto a screen since the light rays do not actually converge at the image position. In the case of a concave mirror, when the object is located between the mirror and the focal point, a virtual image is formed.
2. Enlarged: An enlarged image is one that appears larger than the object itself. In this case, since the image is virtual, it appears to be larger than the actual size of the object.
3. Upright: An upright image is one that has the same orientation as the object. In the case of a concave mirror, when the object is located between the mirror and the focal point, the image formed is upright.
Therefore, the correct option is A, the image formed by the concave mirror is virtual, enlarged (appears larger than the object), and upright (has the same orientation as the object).
To learn more about Concave mirrors click:
https://brainly.com/question/31379461
#SPJ1
a car is traveling north. can its acceleration vector ever Point South? explain
When a car is traveling north, its acceleration vector can point south when it is slowing down.
A vector quantity has both magnitude and direction. The direction of a vector is always shown by the direction to which the arrow points.
If the car is travelling north, the direction of the acceleration vector will continue to point northwards.
However, when the car slows down, the direction of the accelerating vector will now point southwards.
Learn more: https://brainly.com/question/12550364
Why is evolution called a scientific theory?
PLEASE HELP!!!
I think it’s either c or d
Answer:
There is lots of evidence to support it, is the correct answer
The reason why evolution is regarded as a scientific theory is because there are lots of scientific evidences to support it.
Evolution refers to the scientific thinking that complex life forms came out of simple life forms. The complex sequence of events that occurred during the transformation of simple life forms to complex life forms are described by the theories of evolution.
The reason why evolution is regarded as a scientific theory is because there are lots of scientific evidences to support it.
Learn more about evolution: https://brainly.com/question/2725702