A rough turning operation is performed on a 20 hp lathe that has a 92% efficiency. The cut is made on alloy steel whose hardness is 325 HB. Cutting speed = 375 ft/min, feed = 0.030 in/rev, and depth of cut = 0.150 in. Based on these values, can the job be performed on the 20 hp lathe? Use Table 20.2 to obtain the appropriate unit horsepower value.

Answers

Answer 1

Yes, the job can be performed on the 20 hp lathe given the provided values and using Table 20.2 to obtain the appropriate unit horsepower value.

First, we need to find the actual horsepower available from the lathe, taking into account its efficiency. To do this, multiply the lathe's horsepower by its efficiency: 20 hp * 0.92 = 18.4 hp.

Next, we'll use Table 20.2 to find the appropriate unit horsepower value for alloy steel with a hardness of 325 HB. In this case, the unit horsepower is 5.8 hp/in³/min.

Now, we need to calculate the material removal rate (MRR). MRR is given by the formula: MRR = Cutting Speed * Feed * Depth of Cut. In our case, MRR = 375 ft/min * 0.030 in/rev * 0.150 in = 1.6875 in³/min.

Finally, we need to determine the required horsepower for the operation. To do this, multiply the unit horsepower by the MRR: Required Horsepower = 5.8 hp/in³/min * 1.6875 in³/min = 9.7875 hp.

Since the actually available horsepower from the lathe (18.4 hp) is greater than the required horsepower for the operation (9.7875 hp), the job can be performed on the 20 hp lathe.

Learn more about horsepower at:

https://brainly.com/question/14783214

#SPJ11

Related Questions

What are three levels of national, provincial, local government and traditional authorities which make decisions and address the interests of the country

Answers

There are typically three layers of government: National Administration,

Local Government, Provincial/State Government.

The several tiers or levels of decision-making and governance in a nation or region are referred to as levels of government. National, provincial/state, and local governments make up the three primary tiers of government. The provincial/state government is in charge of a particular region or state within the country, whereas the national government is in charge of decisions and policies that have an impact on the entire nation. A city, town, or municipality is an example of a local area that is affected by decisions and policies made by the local government. In some nations, traditional authority may also be involved in local government and decision-making. Although each level of government has distinct duties and functions, they all cooperate to ensure that a nation or other entity runs smoothly.

Learn more about "levels of government." here:

https://brainly.com/question/21826397

#SPJ4

What is a basic characteristic of the IP protocol?a. connectionless
b. media dependent
c, user data segmentation
d. reliable end-to-end delivery

Answers

A basic characteristic of the IP (Internet Protocol) protocol is that it is connectionless.

Unlike connection-oriented protocols, IP does not establish a dedicated connection between sender and receiver before transmitting data. Instead, it breaks data into packets, assigns an IP address to each packet, and then sends the packets over the network. IP is also media-independent, meaning that it can be used over different types of physical and data-link layers, including Ethernet, Wi-Fi, and ATM. However, IP does not provide reliable end-to-end delivery. This means that packets may be lost, duplicated, or delivered out of order, and it is up to higher-level protocols, such as TCP (Transmission Control Protocol), to provide reliability and ensure that all data is delivered correctly to the recipient.

To know more about connectionless click here:

brainly.com/question/29603601

#SPJ4

Consider the various ways in which oil pollution can reach the North American oceans. The greatest amount of oil pollution comes from which of the following sources? Choose one: O A. oil leakage from offshore drilling platforms O B. purposeful dumping of oil-contaminated bilge water from cruise ships O C. large oil tanker accidents near ports and in riversO D. oil residue on roadways and oil dumped in storm drains

Answers

The greatest amount of oil pollution comes from the large oil tanker accidents near ports and in rivers. The correct answer is option c.

Considering the various ways in which oil pollution can reach the North American oceans, the greatest amount of oil pollution comes from large oil tanker accidents near ports and in rivers. The oil tanker accidents occur because of the breaking of oil tankers while they are transporting oil to different countries through the ocean water.

The oil pollution results in severe damage to the aquatic life of the oceans. It is the largest cause of water pollution, which is why measures are taken by different environmental organizations to prevent oil pollution from reaching the oceans, leading to severe consequences on a global scale. The other sources of oil pollution are also harmful to the aquatic life, but the impact of large oil tanker accidents near ports and in rivers is greater than other sources.

Learn more about oil pollution here: https://brainly.com/question/28674739

#SPJ11

Identify ways that you can save energy. For example, walking up a floor instead of taking the elevator, or walking or riding your bike an hour a day instead of taking the car. Estimate the amount of energy that you could save every year with your proposal. Also, estimate the amount of fuel that can be saved in the same manner. State your assumptions, and present your detailed analysis in a report.

Answers

Energy saved = 21,900 kWh per year

Fuel Saved = 730 liters

Let's dive deeper into the details below.

One can save energy in various ways, such as walking up a floor instead of taking the elevator, walking, or riding a bike for an hour a day instead of driving a car. Here are some ways in which energy can be saved:

1. Turning off lights and electronics when they're not in use

2. Using energy-efficient light bulbs

3. Reducing water usage

4. Using public transportation, biking, or walking instead of driving a car

5. Installing a programmable thermostat

6. Purchasing energy-efficient appliances

7. Using natural light to save energy

8. Properly insulating homes to save energy

9. Upgrading to energy-efficient windows and doors

10. Planting trees and shrubs to shade your home and keep it cool during the summer.

11. Weatherizing your home to keep heat in during the winter.

Assumptions: Let's assume that there are three floors in a building, and each floor has five rooms, and each room has four tube lights (40 watts each) that run for ten hours each day. Now, if we replace these tube lights with LED lights, which consume ten watts each, we can save 30*5*4*40 = 60,000 watts per day.

It will be equal to 60 kWh per day or 21,900 kWh per year.

Assumptions: Let's assume that you drive 20 km every day, and your car's average fuel consumption is 10 km per liter of petrol. If you ride a bicycle instead of driving a car for one hour each day, you can save 20/10 = 2 liters of petrol per day.

It will be equal to 730 liters of petrol per year.

Learn more about energy.

brainly.com/question/1932868

#SPJ11

Other Questions

T/F. A consequentialist approach to judging sexual morality will ask whether one is using anyone or whether the sexual relation is an open one. 4 pieces of information do you need to set up sales tax for a client who only does business in their home state? the position vector r describes the path of an object moving in the xy-plane. position vector point r(t) The early Jamestown colony had a high death toll for all the following reasons EXCEPT:a. Poor relations with the local nativesb. Hungerc. Ingesting poisonous plantsd. Disease Write a JAVA program that reads from the keyboard a small password and then offers two options:1. enter your name and a filename to save or2. enter a file name to load.With the option 1 proceed to save to the file an encrypted version of your name (details below), with the option 2 proceed to load the information from the file and decrypt the name and print it to the screen. The options 1 and 2 are in reverse (1 saves the encrypted information to the file, 2 decrypts the information from the file). Details of the encryption: Say your name is Andrei and you chose the password 1234, then you do XOR between the ASCII code for A (first letter in your name) and the ASCII code for 1(first letter in your password), I will denote this operation (A,1) then you do XOR between n and 2 (n,2) (second letter in your name with second letter in password) and so on, thus we will have the following operations to perform: (A,1) (n,2) (d,3) (r,4) (e,1) (i,2). Obviously, if you would choose the password qwer then the XOR operations will be between the following pairs: (A,q)(n,w)(d,e)(r,r)(e,q)(i,w). The trick is that the encrypted text can be decrypted due to the following property of XOR: A XOR B=C; C XOR B=A, thus if I have the results of the XOR operations in the file (and this is your name encrypted) then it is sufficient to do XOR with the same password (with the same ASCII codes) and I will get back the original string. For example, with the first password, (A XOR 1) XOR 1 =A, (n XOR 2) XOR 2=n and so on: ((A,1),1) ((n,2),2) ((d,3),3) ((r,4),4) ((e,1),1) ((i,2),2)= A n d r e i. fill in the blank. ___ is a small data warehouse designed for a strategic business unit or in a department that does not rely on the data warehouse for its content. Which change is MOST likely to occur because of the movement of the axis? as a shareholder in a public company, what are the benefits available to you? The most significant technological breakthrough in the early industrial period was an engine that burned coal to boil water and create __________, which was used to drive mechanical devices. What is the difference between the simple and compound interest if you borrow $3,000 at a 6% interest rate for 2 years?$180.00$10.00$6.00$80.00 Find the tangential and normal components of the acceleration vector for the curve r ( t ) = 3 t , 5 t ^ 2 , 2 t ^ 4 at the point t = 1 A uniform disk with a mass of 190 kg and a radius of 1.1 m rotates initially with an angular speed of 950 rev/min. A constant tangential force is applied at a radial distance of 0.5 m. How much work must this force do to stop the wheel? Answer in units of kJ. I need help with answer this question Are we alive or dead are we a part of memory,in heaven or hell or an exprement of some virtual reality please help don't ai generate After reading the excerpt from "Nicholas Goes Fishing," answer the question below. Use the rubric in the materials for help if needed.Based on this story, a reader could claim that Nicholas is willing to learn and grow. What evidence can you find to support this argument? Using direct quotations and paraphrases, support this argument with three examples. Even though this question is based on a single, provided passage, please show your understanding of citations by including them whenever necessary. Since the author of the story is not listed, include only the story's title in your citations. Use details to support your answer. ... ratings from voters in their district. when the congress investigates federal agencies to make sure that they are following US laws, it is exercising. Whats 21 square root of 98 divided by 7 square root of 21 list and describe the lifetime prevalence of acute stress disorder for interpersonal violence and how the effects of interpersonal violence differ from non-interpersonal trauma. This is an open-ended reading response. You are free to choose your own topic or theme related the readings from weeks 7-8.(The Crito, Thoreau, King, Friedman). What stands out as most significant to you and why?Please post your reading response (500 words) here. Although not required, you are encouraged to read and respond to the listen to the audio clip. what is the musical texture of this excerpt from handel's hallelujah chorus?