A sample of gas contains 0.1200 mol of H2(g) and 0.1200 mol of O2(g) and occupies a volume of 11.5 L. The following reaction
takes place:
H2(g) + O2(g)>H2O2(g)
Calculate the volume of the sample after the reaction takes place, assuming that the temperature and the pressure remain constant.
L

Answers

Answer 1

Answer:

5.75L is the volume of the sample after the reaction

Explanation:

Based on the reaction, 1 mole of H2 reacts with 1 mole of O2 to produce 1 mole of H2O2.

As in the reaction, 0.1200 moles of H2 and 0.1200 moles of O2 are added, 0.1200 moles of H2O2 are produced.

Before the reaction, the moles of gas are 0.2400 moles and after the reaction the moles are 0.1200 moles of gas.

Based on Avogadro's law, the moles of a gas are directly proportional to the volume under temperatura and pressure constant. The equation is:

V1/n1 = V2/n2

Where V is volume and n are moles of 1, initial state and 2, final state.

Replacing:

V1 = 11.5L

n1 = 0.2400 moles

V2 = ?

n2 = 0.1200 moles

11.5L*0.1200 moles / 0.2400 moles = V2

V2 = 5.75L is the volume of the sample after the reaction


Related Questions

Which expression gives the total number of gas particles (NOT moles, but individual particles) found in the lungs of an average human (V = 6.0 L) under normal physiological conditions (P = 1.0 atm, T = 37ºC)?

Answers

Answer:

[tex]particles=1.42x10^{23}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us solve this problem by using the ideal gas law:

[tex]PV=nRT[/tex]

Which can be modified to include the particles in terms of the Avogadro's number:

[tex]PV=\frac{particles}{N_A} RT[/tex]

Thus, if we solve for the particles, we will obtain the expression and the numerical result:

[tex]particles=\frac{PV*N_A}{RT}[/tex]

[tex]particles=\frac{1.0atm*6.0L*6.022x10^{23}}{0.08206\frac{atm*L}{mol*K}*310K} \\\\particles=1.42x10^{23}[/tex]

Regards!

Na2CO3 + CaCl2•2H2O -> CaCO3 + 2NaCl + 2H2O
Calculate how many moles of CaCl2•2H2O are present in 1.50 g of CaCl2•2H2O and then calculate how many moles of pure CaCl2 are present in 1.50 g of CaCl2•2H2O. Then determine how many grams of Na2CO3 are necessary to reach stoichiometric quantities.
For CaCl2 I got 0.0135 mol but I have seen some put 0.0102 mol. Which is it?
For the initial mol of Na2CO3 I got 0.0102 mol but again I’m not sure if I’m right.
For the grams of Na2CO3 I got 1.08 g
Can someone help me figure out if I have this correct?

Answers

Answer:

See explanation

Explanation:

Number of moles = reacting mass/molar mass

Number of moles of CaCl2•2H2O = 1.50 g/147.02 = 0.0102 moles

From the equation;

Na2CO3 + CaCl2•2H2O -> CaCO3 + 2NaCl + 2H2O

We can see is 1:1

1 mole of Na2CO3 reacts with 1 mole of CaCl2•2H2O

x moles of Na2CO3 reacts with 0.0102 moles of CaCl2•2H2O

x = 1 × 0.0102 moles/1

x = 0.0102 moles of Na2CO3

Mass of Na2CO3 = 0.0102 moles of Na2CO3 × 106g/mol = 1.08 g of Na2CO3

A covalent bond is formed by the following process

Answers

Answer:

Covalent bonding occurs when pairs of electrons are shared by atoms.

Explanation:

Atoms will covalently bond with other atoms in order to gain more stability, which is gained by forming a full electron shell. By sharing their outer most (valence) electrons, atoms can fill up their outer electron shell and gain stability.

Water put into a freezer compartment in the same refrigerator goes into a state of less molecular disorder when it freezes. Is this an exception to the entropy principle

Answers

Answer:

No it is not an exception to this principle

Explanation:

Work was carried out by this compressor to reduce the entropy of ice. What this means is that the ice gave out heat which is as a result  of the work that the compressor was putting in. there are violations of this principle

the entropy principle has that the entropy of the universe is always going to be more than 0 (system + surrounding). in this question, the that of the system is negative while that of the surrounding is positive.  As the refrigerator was cooling the water, the air outside was getting heated.  Outside this refrigerator, the gain in entropy is more than the entropy that was lost in the water.

the entropy of the universe once again is more than 0.

Please help me I am so loss

Answers

Answer:

19.25g of C4H10

Explanation:

2C4H10

2×12×4+2×1×10

=116g

8CO2

=8×12+8×16×2

=352 g

116g of C4H10 produces 352 g of CO2

So, x g of C4H10 produces 58.4g of CO2

(cross multiply)

352 x=116×58.4

x=116×58.4÷352

x=19.25g of C4H10

Answer:

19.25g of C4H10

2C4H10

2×12×4+2×1×10

=116g

8CO2

=8×12+8×16×2

=352 g

116g of C4H10 produces 352 g of CO2

So, t g of C4H10 produces 58.4g of CO2

(cross multiply)

352 t=116×58.4

t=116×58.4÷352

t=19.25g of C4H10

Explanation:

A sample of pure tin metal is dissolved in nitric acid to produce 15.00 mL of solution containing Sn2+. When this tin solution is titrated, a total of 42.1 mL of 0.145 mol/L KMnO4 is required to reach the equivalence point. a. What is the concentration of the Sn2+ solution?b. Find the concentration of the Sn2+(aq) in mol/L: (give your answer to 3 decimal places)

Answers

Answer:

1.00 M

Explanation:

Sn^2+ reacts with KMNO4 as follows;

5Sn^2+(aq) + 2MnO4^-(aq) + 16H^+(aq) ----> 5Sn^4+(aq) + 2Mn^+(aq) + 8H2O(l)

The number of moles of MnO4^- reacted = 42.1/1000 L × 0.145 mol/L

= 0.0061 moles

If 5 moles of Sn^2+ reacts with 2 moles of MnO4^-

x moles of Sn^2+ reacts with 0.0061 moles of MnO4^-

x= 5 × 0.0061/2

x= 0.015 moles

Since the volume of the Sn^2+ solution is 15.00mL or 0.015 L

number of moles = concentration × volume

Concentration = number of moles/volume

Concentration= 0.015 moles/0.015 L

Concentration = 1 M

How many grams of P4O10 (292.88 g/mol) form when phelpsphorous (P4, 125.52 g/mol) reacts with 16.2 L of O2 (33.472 g/mol) ) at standard temperature and pressure

Answers

Answer:

40.5 g of P₄O₁₀ are produced

Explanation:

We state the reaction:

P₄ + 5O₂ → P₄O₁₀

We do not have data from P₄ so we assume, it's the excess reactant.

We need to determine mass of oxygen and we only have volumne so we need to apply density.

Density = mass / volume, so Mass = density . volume

Denstiy of oxygen at STP is: 1.429 g/L

1.429 g/L . 16.2L = 23.15 g

We determine the moles: 23.15 g . 1mol / 33.472g = 0.692 moles

5 moles of O₂ can produce 1 mol of P₄O₁₀

Our 0.692 moles may produce (0.692 . 1)/ 5 = 0.138 moles

We determine the mass of product:

0.138 mol . 292.88 g/mol = 40.5 g

Precipitation of an ionic compound will occur upon mixing of desired reagents if the initial ion product is:_______
A) greater than the Ksp
B) equal to the pksp
C) equal to the Ksp
D) less than the Ksp

Answers

Answer:

A) greater than the Ksp

Explanation:

Given a solid ionic compound AB, it dissociates in water into its ions, as follows:

AB(s) → A⁺(aq) + B⁻(aq)

At equilibrium, the product of the concentrations of the ions is constant, and it is called Ksp:

AB(s) ⇄ A⁺(aq) + B⁻(aq)

Ksp = [A⁺][B⁻] ⇒ (concentrations at equilibrium)

Upon mixing the reagents for the formation of AB, the compound will precipitate if the initial ion product (Q) is greater than the Ksp. If Q is equal to Ksp, the ions are at equilibrium with the solid compound AB, and if is it less than the Ksp, the ions are soluble and no solid AB is formed yet.

Q = [A⁺][B⁻] ⇒ (initial concentrations)

Q = Ksp ⇒ saturated solution (at equilibrium)

Q< Ksp ⇒ unsaturated solution (ions are soluble)

Q> Ksp ⇒ precipitation of solid compound.

Therefore, the correct option is A) greater than the Ksp

Solid aluminum (AI) and oxygen (0) gas react to form solid aluminum oxide (AIO). Suppose you have 7.0 mol of Al and 13.0 mol of o, in a reactor. Suppose as much as possible of the Al reacts. How much will be left? Round your answer to the nearest 0.1 mol mol 0.

Answers

Answer:

[tex]n_{O_2}^{leftover}=7.7mol[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set up the corresponding chemical equation:

[tex]4Al+3O_2\rightarrow 2Al_2O_3[/tex]

In such a way, we calculate the moles of aluminum consumed by 13.0 moles of oxygen in the reaction, by applying the 4:3 mole ratio between them:

[tex]n_{Al}=13.0molO_2*\frac{4molAl}{3molO_2} =17.3molAl[/tex]

This means that Al is actually the limiting reactant and oxygen is in excess, for that reason we calculate the moles of oxygen consumed by 7.0 moles of aluminum:

[tex]n_{O_2}=7.0molAl*\frac{3molO_2}{4molAl} =5.3molO_2[/tex]

Thus, the leftover of oxygen is:

[tex]n_{O_2}^{leftover}=13.0mol-5.3mol\\\\n_{O_2}^{leftover}=7.7mol[/tex]

Whereas all the aluminum is assumed to be consumed.

Regards!

4) In water, Vanillin, C8H8O3, has a solubility of 0.070 moles of vanillin per liter of solution at 25C. What will be produced if 5.00 g of vanillin are added to 1 L of water at 25 C

Answers

Answer:

An unsaturated solution.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly realize we need to calculate the grams of vanillin in 0.070 moles by using its molar mass of 152.15 g/mol:

[tex]m=0.070mol*\frac{152.15 g}{1mol} =10.65g[/tex]

Thus, since the solubility is 10.65 g per 1 L of solution, we can notice 5.00 g will complete dissolve and produce an unsaturated solution.

Best regards!

Classify each of the following chemical reaction as a synthesis, decomposition, single-displacement, or double-displacement reaction. Drag the appropriate items to their respective bins.

CH3Br → CH3(g) + Br(g)
Zn(s) + CoCl2(aq) → ZnCl2(aq)

Answers

Yes kkkkkkkkkkkkkkkk

First Reaction is a Decomposition reaction as a single reactant hets decompoesed to form two products.Second reaction is a Synthesis reaction as two Reactant reacts together to form one product.

What is Decomposition Reaction ?

Decomposition reactions are processes in which chemical species break up into simpler parts.

Usually, decomposition reactions require energy input.

Hence, First Reaction is a Decomposition reaction as a single reactant hets decompoesed to form two products.Second reaction is a Synthesis reaction as two Reactant reacts together to form one product.

Learn more about Reaction here ;

https://brainly.com/question/27948961

#SPJ2

Approximately how much energy (in kJ) would be released during the formation of the bonds in 2.00 mol of acetone molecules

Answers

Answer:

7822 kJ

Explanation:

The formula for acetone is: CH3COCH3

From the standard bond energy(enthalpy):

C - H bond = 412

C - C bond = 348

C = O bond = 743

From the structure of an acetone

C is bonded to H in six places;

so, for  C- H bond = 6 × 412 = 2472

C is only bonded to two other carbon atoms

For C - C bond = 2 × 348 = 696

Carbon is only doubly bonded to an oxygen atom

For C = O bond = 1 × 743 = 743

The total net energy bond in a mole = (2472 + 696 + 743) kJ/mol

= 3911 kJ/mol

Finally, in 2 moles of acetone, the required amount of energy will be:

= 3911 kJ/moles × 2 moles

= 7822 kJ

Elements that have the same number of electron rings are ?

Answers

Answer:

are in the same orbital

Explanation:

Answer:

are in the same orbit

Explanation:

Each set of quantum numbers to the correct sub shell description

Answers

The image of the chart that I attach will allow you to answer the question since you did not include in your question of the quantum numbers. I hope this helps :)

Compute the equilibrium constant for the spontaneous reaction between Cd2 (aq) and Zn(s).

Answers

Answer:

Kc = [Zn²⁺] / [Cd²⁺]

Explanation:

Let's consider the spontaneous redox reaction between Cd²⁺ and Zn.

Cd²⁺(aq) + Zn(s) ⇄ Cd(s) + Zn²⁺(aq)

The equilibrium constant, Kc, is the ratio of the equilibrium concentrations of products over the equilibrium concentrations of reactants each raised to the power of their stoichiometric coefficients. It only includes gases and aqueous species.

Kc = [Zn²⁺] / [Cd²⁺]

The cation of the salt is sodium ion, and the anion is aurothiosulfate ion. Based on the chemical formula of the salt, what must the charge be of the aurothiosulfate ion [Au(S2O3)2 n- ]

Answers

Answer:

3-

Explanation:

Sodium aurothiosulfate is a salt with the formula Na₃Au(S₂O₃)₂. The cation of the salt is sodium ion, and the anion is aurothiosulfate ion. We can determine the charge of the aurothiosulfate ion, considering that the sum of the positive and negative charges must be equal to the charge of the compound, which is zero.

3 × Na⁺ + 1 × Au(S₂O₃)₂ⁿ⁻ = 0

3 × +1 + 1 × Au(S₂O₃)₂ⁿ⁻ = 0

Au(S₂O₃)₂ⁿ⁻ = 3-

How many molecules are in
6.0 moles of methane (CH4)?

Answers

Answer:

[tex]{ \tt{1 \: mole = 6.02 \times {10}^{23} \: molecules }} \\ { \tt{6.0 \: moles = (6 \times 6.02 \times {10}^{23}) \: molecules }} \\ = { \bf{3.612 \times {10}^{24} \: molecules}}[/tex]

How many moles in 3.30g of iron

Answers

The answer below is correct but to give you the process, here it is:

Molar mass of iron, Fe = 55.85 g/mol

3.30g/(55.85 g/mol) = 0.0591 mol

what are the angles a and b in the actual molecule of which this is a lewis structure note for advanced students give the ideal angles and don t worry about small differences from the ideal that might be caused by the fact that different electron groups may have slightly different sizes

Answers

Answer:

The answer is "120 C  and 109.5 C".

Explanation:

The carbon atom is hybridized by sp2. This angle of connection thus is 120 degrees. Alkene, specifically both carbons which are in the C=C, are an instance of carbon with sp2 hybridized atom's nucleus. Those three hybridized orbits were linked to certain other atoms forming sigma connections. Its remaining 2p orbital makes a pi link with 2p orbit by the side-overlap of all the other carbon. O is hybridized inside the [-OH] Group. The optimal bond angle therefore is [tex]109.5^{\circ}[/tex].

[tex]a= 120 \ C\\\\b= 109.5 \ C[/tex]

A chemical reaction in a bomb calorimeter evolves 3.86 kJ of energy in the form of heat. If the temperature of the bomb calorimeter increases by 4.17 K, what is the heat capacity of the calorimeter?

Answers

Answer:

925.66 J/K

Explanation:

Applying,

Q = CΔt............. Equation 1

Where Q = amount of heat, C = heat capacity of the calorimeter, Δt = rise in temperature.

make C the subject of the equation

C = Q/Δt.............. Equation 2

From the question,

Given: Q = 3.86 kJ = 3860 J, Δt = 4.17K

Substitute into equation 2

C = 3860/4.17

C = 925.66 J/K

Which of the following is an example of matter?
a) Hydrogen atom
b) Water molecule
c) Oxygen gas
d) All of the above

Answers

Answer:

All of the above

Explanation:

Molecules make up matter so they are considered matter as well.

Hope it helps c:

When CH3NO2 burns in excess oxygen, it forms carbon dioxide, nitrogen dioxide and water. How many moles of oxygen are required to burn 17.10 mole(s) of CH3NO2

Answers

Explanation:

The given reaction is the combustion of CH3NO2.

The balanced chemical equation of the reaction is:

[tex]4CH_3NO_2+ 7O_2 ->4 CO_2+4NO_2+6H_2O[/tex]

So, from the balanced chemical equation, it is clear that:

4 moles of CH3NO2 --- 7 moles of oxygen gas is required.

then,

for 17.10 moles of CH3NO2 the following number of moles of oxygen is required.

[tex]The number of moles of O_2 required=17.10 mol. x \frac{7 mol}{4 mol} \\=29.925 mol[/tex]

Answer is :

29.9 mol of oxygen gas is required.

To determine the concentration of an EDTA solution, 4.11 g of Zn metal was used. The volume of EDTA solution needed to reach the endpoint was 28.26 mL. What was the concentration (in molarity) of the EDTA solution?

Answers

Answer:

2.23M

Explanation:

Molarity of a solution is calculated thus

Molarity = number of moles (n) ÷ volume (V)

According to this question, 4.11g of Zn metal was used in order to reach a volume of EDTA solution of 28.26 mL.

28.26mL = 28.26/1000

= 0.02826L

Using mole = mass/molar mass to calculate no. of moles of Zn

Mole = 4.11/65.4

mole = 0.0628mol

Molarity = 0.0628 ÷ 0.02826

Molarity = 2.23M

The concentration of the EDTA solution used is 2.23M

Some organic solvents do not work well in liquid-liquid aqueous extractions. Ethanol (HOCH2CH3) is a common inexpensive solvent, but is a poor solvent for extractions. In ten or fewer words, provide an explanation for why ethanol is a poor solvent selection for extraction.

Answers

Answer:

See explanation

Explanation:

Extraction has to do with the separation of the components of a mixture by dissolving the mixture in a set up involving two phases. One phase is the aqueous phase (beneath) while the other is the organic phase (on top). The solvents used for the two phases must not be miscible. Water commonly is used for the aqueous phase.

Ethanol is an important solvent in chemistry but the solvent is miscible with water in all proportions. As a result of this, ethanol is a poor solvent for carrying out extraction.

A compound, C20H28O, produces a 1H NMR spectrum with 11 distinct signals. The steps made by the integral trace measure 52, 17, 17, 26, 17, 25, 26, 9, 9, 35, and 8 mm. Complete the following table.

Integral # Products
52 mm
17 mm
17 mm
26 mm
17 mm
25 mm
26 mm
35 mm
8 mm

Answers

Solution :

The smallest integer value represents the smaller number of protons.

In this case, in the given values, the smallest numbers are 8 mm and 9 mm, so both contains 1H each. Then next highest  value is 17 mm, which contains 1H more. Thus 17 mm contains 2H each. Then the next highest is 25 mm and 26 mm which contains 3M each and so on.

Thus the tables is :

Integral     Protons

52 mm           [tex]6[/tex]

17 mm            [tex]2[/tex]

17 mm            2

26 mm           3

17 mm            2

25 mm           3

26 mm           3

9 mm              1

9 mm              1

35 mm            4    

8 mm              1

In Experiment 1, salicylic acid was treated with an excess of acetic anhydride to synthesize aspirin. Once the reaction went to completion, water was added to the flask and the solution was heated. What was the primary reason for adding water

Answers

Answer:

See explanation

Explanation:

Aspirin is a very important pain killer. The production of aspirin involves a reaction between salicylic acid and excess acetic anhydride.

Usually, a small amount of a mineral acid is added as a catalyst.

Aspirin is actually acetyl salicylic acid. When this substance is formed, the substance is not really soluble in water. Addition of water leads to the precipitation of the aspirin product.

Hence, the addition of water is mostly to precipitate the pure aspirin product after reaction.

For the following list of acids, rank the acids in strength from weakest acid to strongest acid.

a. FCH2OH
b. F2CHOH
c. CH3OH
d. F3COH

Answers

Answer:

CH3OH < FCH2OH < F2CHOH < F3COH

Explanation:

Let us recall that, for a carboxylic acid, the dissociation of the acid yields;

RCOOH ⇄RCOO^- + H^+

The ease of dissociation and release of the hydrogen ion depends on the nature of the group designated R.

When R is is a highly electronegative element, the -I inductive effect causes the hydrogen to become less tightly held by the C-Cl bond.

As the number of electron withdrawing substituents increaseses, the acid ionizes much more and becomes stronger.CH3OH < FCH2OH < F2CHOH < F3COH

Hence, the order of decreasing acid strength is;

Write the structure of methanamine

Answers

Answer: CH3NH2

Explanation:

What is the pH of a solution prepared by mixing 100.00 mL of 0.020 M Ca(OH)2 with 50.00 mL of 0.100 M NaOH? Assume that the volumes are additive?a. 12.78.b. 13.25.c. 12.67.d. 12.95.

Answers

Answer:

The pH of the solution is 12.78.

Explanation:

The pOH (or potential OH) is a measure of the basicity or alkalinity of a solution. The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH- ions:

pOH= - log [OH-]

On the other side, Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume. Molarity is calculated as:

[tex]Molarity= \frac{number of moles}{volume}[/tex]

Molarity is expressed in units: [tex]\frac{moles}{liter}[/tex]

In this case, the solution is prepared by mixing 100 ml (equal to 0.1 L, where 1000 mL = 1 L) of Ca(OH)₂ 0.020 M with 50 ml (equal to 0.05 L) of 0.100 M NaOH. Then, Ca(OH)₂ and NaOH are strong bases, so they dissociate completely. In the case of the first hydroxide, for each mole of Ca(OH)₂,

form two moles of OH-. In the case of sodium hydroxide, for each mole of hydroxide, one mole of OH- is formed. So, taking into account the definition of molarity, the number of moles of OH- that each hydroxide contributes to the solution is calculated as:

From Ca(OH)₂: 0.1 L* 0.02 M*2 = 0.004 moles

From NaOH: 0.05 L* 0.1 M= 0.005 moles

So, the amount of total moles of OH- is the sum that each hydroxide contributes to the solution: 0.004 moles + 0.005 moles= 0.009 moles

On the other hand, volumes are additive. Then: 0.1 L +  0.05 L= 0.15 L

Replacing in the definition of molarity the number of moles and the volume:

[tex][OH-]=\frac{0.009 moles}{0.15 L}[/tex]

Solving:

[OH-]= 0.06 [tex]\frac{moles}{liter}[/tex]

Replacing in the definition of pOH:

pOH= - log 0.06

pOH= 1.22

The following relationship can be established between pH and pOH:

pH + pOH= 14

Being pOH= 1.22 and replacing:

pH + 1.22= 14

pH= 14 - 1.22

pH= 12.78

The pH of the solution is 12.78.

Write the structure of butanoate ion.

Answers

Answer:

Explanation:

Molecular FormulaC4H7O2

Average mass87.098 Da

Monoisotopic mass87.045151 Da

Other Questions
Complete each phrase with the word for the appropriate family member. express in Qbasic assignment statement[tex]v = \ \sqrt{t} ^{2} - 4s \div {d}^{4} [/tex][tex]K = {8}{x} ^{3} - {2}{y}^{ 6} \div {5}{d}+ {e}^{4} [/tex] Which biome does this photograph represent? solve for x please help (show work!) the sum of 2 numbers is 18 and there difference is 6 You would like to know how effective a diet program is at helping people lose weight. 18 over-weight people are randomly selected to participate in the program. They are weighed before and after the program and the results are listed below. Do these results give evidence that the diet program is effective at the 1% significance level? Which of the following was a major turning point in the history of Vietnam's struggle fornational independence?The election of President Dwight D. EisenhowerThe formation of NATOO The Battle at Dien Bien PhuThe Korean War Cho bit DABC DMNP theo t s 2/3 v chu vi ca DABC l 12cm. Chu vi ca DMNP l .Kt lun ng l: A.4,5 cm B.7,5 cm C.8cm D.18cm In "The Pedestrian" what idea most clearly indicates that Mead is an unusual person in his society For each of the genotypes (AA,Aa or aa) below determine what the phenotype would be. Purple flowers are dominant to white flowers.PP_____ Pp_____ pp_____ What is the missing digit?820,107 65,084167,023 Look at this painting by Claude Monet. What makes it an impressionist painting? Need answers in 2 minutes ASAP Jillian bought 3 pounds of apples for $3.09 per pound. she then bought 6 pounds of peanuts for $0.87 per pound. How much did Jillian spend all together? Se o preo de 8 potes de nutella 288 reais, qual e o preo se 5 potes de Nutella Two closely related beetle species are in the same location. They exhibit reproductive isolation, and they are both diploid. Biologists are arguing about whether it is more likely that they evolved via sympatric or via allopatric speciation. What statement presents the best argument A line passes through the point (12,-4) and is perpendicular to the line with the equation y=6x +3 42 deliveries in 3 hours = deliveries per hour Asking yourself whether your mind is currently occupied by things that can take your concentration off the road is something you should do ______. Is 6272 a perfect square? If not find the smallest number by which it must be divided so that the product becomes a perfect square.