Answer:
–132.55 °C
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 30.8 L
Initial temperature (T₁) = –67 °C
Final volume (V₂) = 21.0 L
Final temperature (T₂) =?
Next, we shall convert –67 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = –67 °C
Initial temperature (T₁) = –67 °C + 273
Initial temperature (T₁) = 206 K
Next, we shall determine the final temperature of the gas. This can be obtained as follow:
Initial volume (V₁) = 30.8 L
Initial temperature (T₁) = 206 K
Final volume (V₂) = 21.0 L
Final temperature (T₂) =?
V₁/T₁ = V₂/T₂
30.8 / 206 = 21 / T₂
Cross multiply
30.8 × T₂ = 206 × 21
30.8 × T₂ = 4326
Divide both side by 30.8
T₂ = 4326 / 30.8
T₂ = 140.45 K
Finally, we shall convert 140.45 K to celsius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
T₂ = 140.45 K
T₂ = 140.45 K – 273
T₂ = –132.55 °C
Thus, the new temperature of the gas is –132.55 °C
which element is shown in the picture here?
Using the periodic table, choose the more reactive nonmetal.
Te or O
Answer:
answer is TE
Explanation:
Answer:
Tellurium is more reactive than Oxygen
1. Chlorofluorocarbons (CFCs) are of interest because of their ability to destroy ozone molecules. A carbon-chlorine bon din the CFC molecule can be broken by sunlight, leaving a highly reactive free radical which then goes on to destroy the surrounding ozone molecules. The energy of a C-Cl bond is 328 kJ/mole. Calculate the wavelength of light needed to break a bond in a single molecule. In which region of the spectrum (infrared, visible, UV) does this wavelength fall
Answer:
See explanation
Explanation:
Energy of the photon (E) = 328 * 10^3/6.02 * 10^23 = 5.45 * 10^-19 J
Recall that E = hc/λ
h = Plank's constant = 6.36 * 10^-34 Js
c = speed of light = 3 * 10^8 m/s
λ = ??
λ = hc/E
λ = 6.36 * 10^-34 * 3 * 10^8/5.45 * 10^-19
λ = 3.5 * 10^-7 m
This falls into the UV region of the spectrum
PLEASE HELP!!
A scientist places a pH meter in a sample of concentrated potassium hydroxide (KOH). The scientist slowly adds nitric acid (HNO3) to the KOH and monitors the pH. Describe how the pH and hydronium ion concentration will change in the solution as the acid is added.
Answer:
pH of the solution will decrease & hydronium ion concentration will increase in the solution as the acid is added.
Explanation:
HELP FAST 75 PTS Calculate the amount of heat needed to melt 35.0 g of ice at 0 ºC. must show work
Answer:
It takes 12,000 Joules of energy to melt 35 grams of ice at 0 °C
Explanation:
Good Luck!
Explain what method you would use to obtain
Petrol (boiling point 20
60 C) from a mature of petrol and kerosene (boiling point 180 220 C)
Answer:
Fractional distillation of crude oil in laboratory
Explanation:
In general, we can sort them according to their boiling point.
We should first place a ball of mineral wool soaked with petroleum into a boiling tube and heat it with a Bunsen flame. At the beginning of the experiment, heat the mineral with a gentle flame, and then more strongly later. The fraction with a lower boiling range will distil out first. Since petrol is quite volatile, it should be condensed by cooling with water or an ice-water bath.
Petrol will be collected first, as it has a lower boiling point than kerosene. It will turn into vapour and condense again in the receive tub in the beaker.
PLEASE PLEAS HELP I REALLY NEED IT
Answer:
A i took the quiz
Explanation:
Give an example of an electrolyte
Answer: sodium chloride water solution
Explanation: Eelctrolyte contains cations and anions which can
Transfer charge
Answer:
some energy drinks like powerade or Gatorade, and some juice drinks to.
You heat water and olive oil in two separate pans for a delicious new pasta recipe. The pans are the same temperature, but only the water is boiling! Why?
A
Olive oil has weaker intermolecular forces than water. This makes the intermolecular forces in oil easier to break, and keeps the molecules stuck together in a liquid state.
B
Water has weaker intermolecular forces than olive oil. This makes the intermolecular forces easier to break, allowing the individual water molecules to separate and change to a gas.
C
Water is losing electrons more quickly than olive oil is. The electrons float to the surface of the water, and their movement allows the phase change to happen.
Answer:
I think A is the correct answer
Answer: the answer is B 100%
what career field/job would utilize ppm units
A environmental jobs
B Medical fields
C Jobs at the brewery
D Jobs in analytical chemistry
The half-life of 226Ra is 1.60x103 years. How long until only 12.5% of the original sample of 226Ra remains?
Answer:
4.80×10³ years
Explanation:
Let the original amount (N₀) of ²²⁶Rn = 1 g
Therefore,
12.5% of the original amount = 12.5% × 1 = 12.5/100 × 1 = 0.125 g
Next, we shall determine the number of half-lives that has elapse. This can be obtained as follow:
Original amount (N₀) = 1
Amount remaining (N) = 0.125 g
Number of half-lives (n) =?
N = 1/2ⁿ × N₀
0.125 = 1/2ⁿ × 1
0.125 = 1/2ⁿ
Cross multiply
0.125 × 2ⁿ = 1
Divide both side by 0.125
2ⁿ = 1/0.125
2ⁿ = 8
Express 8 in index form with 2 as the base
2ⁿ = 2³
n = 3
Thus, 3 half-lives has elapsed.
Finally, we shall determine the time taken for only 12.5% of the original sample of ²²⁶Rn to remain.
This can be obtained as follow:
Half-life (t½) = 1.60×10³ years
Number of half-lives (n) = 3
Time (t) =?
t = n × t½
t = 3 × 1.60×10³
t = 4.80×10³ years.
Thus, it will take 4.80×10³ years for 12.5% of the original sample of ²²⁶Rn to remain.
Ca3(PO4)2 + 3H2SO4 3CaSO4 + 2H3PO4.
What mass of concentrated H2SO4 (98% by mass) must be used to react completely
with 100.00 g of calcium phosphate?
100g
H2SO4 = 3x98x100/310 = 94.84g
used mass of h2so4x100/all mass of H2so4 = 98%
yx100/98=94.84x100/98 = 96.81.
Check the attached photo for clear answer.
What is the use of calcium phosphate?It may be used to treat conditions caused by low calcium levels such as bone loss (osteoporosis), weak bones (osteomalacia/rickets), decreased activity of the parathyroid gland (hypoparathyroidism), and certain muscle diseases (latent tetany).
Is calcium phosphate good for health?About Calcium Phosphate Supplements
It aids in healthy bone development and is crucial from infancy to adulthood. But, calcium does more than build strong bones. It's also very important for healthy digestion. Calcium aids in bile acid metabolism, excretion of fatty acids, and healthy gut microbiota.
Learn more about calcium phosphate at
https://brainly.com/question/10835189
#SPJ2
__C+_SO2—_CS2 + __CO
Answer:
_c+_so2-_cs2+_co= Toxic
How much more acidic/more H+ concentration is a pH of 6 than pH of 8
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: 1000x
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
How can the speed of solvent molecules be slowed down?
A.by increasing the temperature
B. by increasing the surface area of the solute
C. by increasing the pressure
D. by decreasing the temperature
E. by decreasing the surface area of the solute
Answer:
D
Explanation:
When molecules absorb energy they speed up and have a more forceful collision with solute molecules.
A 20.0 L container at 303 K holds a mixture of two gases with a total pressure of 5.00 atm. If there are 2.00 mol of Gas A in the mixture, how many moles of Gas B are present?
The number of moles of Gas B in the gas mixture is equal to 2.00 mol.
What is the ideal gas equation?The ideal gas equation can be explained as an equation that describes the state of an ideal gas. This equation gives the product of the volume and pressure of ideal gas equal to the multiplication of the universal gas constant, absolute temperature, and moles of gas.
The mathematical form of the ideal gas equation mentioned below:
PV = nRT
Where P is the pressure, V is the volume, n is the moles, and R is the gas constant.
Given, the volume of the gas mixture, V = 500 ml = 0.5 L
The temperature of the gas mixture, T = 303 K
The pressure of the gas mixture = 5 atm
The value of gas constant, R =0.082 atmL/K mol
Substituting the values R, V, P, and T in the ideal gas law, we get:
The number of moles of the gas mixture, n = PV/RT
n = 5 ×20/(0.082 × 303)
n = 4.00 mol
The total number of moles of gas mixture = 4.00 mol
The moles of Gas A = 2.00 mol
The moles of Gas B = 4 - 2 = 2.00 mol
Learn more about ideal gas equation, here:
brainly.com/question/3637553
#SPJ2
How many grams are in 1.2 x 10^24 atoms of sodium?
8. Zeolite is used to remove moisture from methane. A vertical column is filled with 1000.0 kg of dry zeolite. The zeolite has the capacity to hold 0.100 kg water/kg dry zeolite. Once the zeolite becomes saturated with moisture, it must be regenerated by heating. The inlet moisture content of the methane is 7.00% (by mass) and the outlet moisture content is 0.05% (by mass). How much methane (kg) will be produced before the zeolite must be regenerated
Answer:
Follows are the solution to this question:
Explanation:
Methane inlet humidity content of [tex]=7.00\%[/tex]
Methane moisture outlet content [tex]=0.05\%[/tex]
Zeolite absorption humidity [tex]= 6.95\%[/tex]
Dry zeolite 1 kg will accommodate water[tex]= 0.1000 \ kg[/tex]
One kilogram of Dry Zeolite will carry water from [tex]=0.1000\ kg[/tex]
The water can contain 1000 kg of zeolite [tex]= 100 \ kg[/tex]
Methane which would be made [tex]=\frac{100}{6.95\%}= 1,439 \ kg[/tex]
That's why it will be producing 1439 kg of methane.
The amount of methane that can be produced before the regeneration of zeolite is 1,439 kg.
What is zeolite?
Zeolite belongs from the family of hydrated aluminosilicate minerals, in which alkali and alkaline earth metals are present.
In the question, it is given that:
Capacity of 1kg of zeolite to hold water = 0.100kg
Capacity of 1000kg of zeolite to hold water = 100kg
Inlet moisture content of the methane = 7.00 % (by mass)
Outlet moisture content of the methane = 0.05% (by mass)
Capacity of zeolite to absorb methane content = 6.95 %
Amount of methane before the regeneration of zeolite = 100kg / 6.95% = 14.39% of kg = 1,439 kg
Hence, 1,439 kg methane will be produced before the zeolite must be regenerated.
To know mote about zeolite, visit the below link:
https://brainly.in/question/1081379
what are the twa parts of central nervous system ?
Answer:
The nervous system has two main parts: The central nervous system is made up of the brain and spinal cord.
Explanation:
A chemistry student is given 4.00 L of a clear aqueous solution at 22°C. He is told an unknown amount of a certain compound X is dissolved in the solution. The student allows the solution to cool to 22 C. The solution remains clear. He then evaporates all of the water under vacuum. A precipitate remains. The student washes, dries and weighs the precipitate. It weighs 0.56 kg.
Required:
Using only the information above, Calculate the solubility of X in water at 22° C. If you said yes, calculate it Be sure your answer has a unit symbol and 2 no .0 it. significant digits.
Answer:
The responses to the given points can be defined as follows:
Explanation:
In point 1:
The answer is "No".
In point 2:
The mass of solute = The mass of precipitate [tex]= 0.56\ kg =0.56\ \times 1000 = 560 \ g[/tex]
Calculating the solubility:
[tex]= \frac{\text{mass of solute in g}}{\text{volume of solution in ml}}\\\\ = \frac{560}{ 4000} \\\\ = 0.14 \ \frac{g}{ml}[/tex]
Identify the type of reaction.
Al + MgSO4 = Al2(SO4)3 + Mg
Answer: its combustion
Explanation:
Do molecules move in all phases? (yes/no)
Answer: sorta
Explanation:
In fact, they do not flow at all: they simply vibrate back and forth. Because the atoms in a solid are so tightly packed, solid matter holds its shape and cannot be easily compressed
Which of the following would be defined as an exact number?
A. bronze is 12.5% by mass tin
B. 25 ml
C. 50.00 cm
D. 1.000 liters
Balance C3H8 + O2 + CO2 + H2O
Assuming the second plus sign is a typo and was meant to be a reaction arrow, this would be the balanced equation:
C3H8 + 5O2 —> 3CO2 + 4H2O
An iron sulfide compound is analyzed, and found to contain 11.26 g iron and 9.70 g sulfur. Determine the molar ratio of sulfur to iron in this compound, and hence its chemical formula.
Answer:
Molar ratio = 1.5Chemical formula = Fe₂S₃Explanation:
First we convert the given masses of each element into moles, using their respective molar masses:
Fe ⇒ 11.26 g ÷ 55.845 g/mol = 0.202 mol FeS ⇒ 9.70 g ÷ 32.065 g/mol = 0.302 mol SNow we divide them in order to calculate the molar ratio of S to Fe:
0.302 / 0.202 = 1.5Meaning that for each 1 Fe mol, there's 1.5 S moles. We can write that as Fe₁S₁.₅
Finally we double those subscripts so that they become the lowest possible integers: Fe₂S₃.
What is the percent composition of hydrogen in glucose
Answer:
67%Explanation:
Thus the % composition of glucose by mass is carbon 40.0 % oxygen 53.3 % hydrogen 6.7 % in this way, the % composition by mass of any compound can be calculated provided that is formed is known.How many moles of silver atoms are in the piece of jewelry?
The number of moles of silver atoms in the piece of jewelry is 0.08784 moles
Here is the complete question:
Suppose a piece of jewelry contains 5.29 × 10²² atoms of silver . How many moles of silver atoms are in the piece of jewelry?
From the question,
A piece of jewelry contains 5.29 × 10²² atoms of silver.
To determine number of moles of silver atoms in the piece of jewelry,
We will use the formula
[tex]Number \ of \ moles = \frac{Number \ of \ atoms }{Avogadro's \ number}[/tex]
From the question
Number of atoms of silver = 5.29 × 10²² atoms
and
Avogadro's number = 6.022 × 10²³ atoms/mole
∴ [tex]Number \ of \ moles \ of \ silver \ atoms= \frac{5.29 \times 10^{22} }{ 6.022 \times 10^{23} }[/tex]
Number of moles of silver atoms = 0.08784 moles
Hence, the number of moles of silver atoms in the piece of jewelry is 0.08784 moles
Learn more here: https://brainly.com/question/10982975
how many grams of hcl would be produced if 54 grams of water were used
Answer:
i dont know
Explanation:
its simple i dont know
Answer:
Explanation:Red
Which superpower would you have for the rest of your life?
The ability to fly
Teleportation
Super speed
Super strength
Invisibility
Time travel
Or be normal and have nothing special
time travel is the best option
32 g of a metal, M, reacts with 8 g of oxygen to form an oxide. The formula of the oxide is MO. What is the atomic mass of M in g mol-?
Answer: M= 128 g/mol (Te is quite close)
Explanation: number of Oxygen moles is n = 8 g / 32 g/mol = 0,25 mol.
Because formula of oxide is MO, thus amount of metal is also 0,25 mol.
Because n = m/M , Molar mass of the metal M = m/n = 32 g /0.25 mol = 128 g/ mol
