A scientist is conducting a Sanger's sequencing experiment to determine the number of polypeptides present in an oligomeric protein. The molecular weight of the protein is 18000 g/mol . After the reaction of 520 mg of the protein with 1‑fluoro‑2,4‑dinitrobenzene, the peptide bonds were hydrolyzed with an acid. As a result, the scientist obtained 39 mg of 2,4‑dinitrophenyl serine. What is the number of the polypeptide chains present in the oligomer?

Solution :

A substrate is defined as the chemical species that are being observed in the chemical reaction where the substrate reacts with a reagent and forms a product. It can also be referred to the surface where some other chemical reactions are performed.

Stereochemistry is defined as the study of relative spatial arrangement of the atoms which forms the structure of the molecules and their respective manipulations.

In the context, the products including the stereochemical designations for any chirality centers starting from the  (R)-3-methylhex-1-yne as the substrate are attached below.  

Using boyles law

[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]

[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]

[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]

Answer:

[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]

Explanation:

We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.

[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]

The volume is changed to 0.92 liters, but the pressure is unknown.

[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]

We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]

The units of liters cancel each other out.

[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]

[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]

[tex]4.565217391 \ atm = P_2[/tex]

The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.

[tex]4.6 \ atm \approx P_2[/tex]

The pressure is approximately 4.6 atmospheres.

Answer:

The formula is:

Sn(ClO3)2

Tin(II) Chlorate is also called stannous chlorate and is a white-colored solid. Hydrates are the addition of water molecules. Tin (II) chlorate decahydrate is represented by Sn(ClO₃)₂ . 10 H₂O.

Hydrates are the chemical compounds used to represent the water molecule (H₂O) in a compound. The water molecules are added to the compound formula as a crystalline structure.

The element tin is represented by the symbol Sn and chlorate is represented as (ClO₃)₂. The formula also has decahydrate which means it has ten molecules of water that can be represented by 10 H₂O.

The stock nomenclature is used to give the formula for the compound. The overall formula of the compound after adding the individual symbol will give, Sn(ClO₃)₂. 10 H₂O.

Therefore, Sn(ClO₃)₂ . 10 H₂O is a formula for tin (II) chlorate decahydrate.

Learn more about hydrates here:

https://brainly.com/question/11202174

#SPJ2

Answer:  Groundwater and surface water are connected. When groundwater is overused, the lakes, streams, and rivers connected to groundwater can also have their supply diminished. Land subsidence occurs when there is a loss of support below ground. This is most often caused by human activities, mainly from the overuse of groundwater, when the soil collapses, compacts, and drops.

Hope it Helps. :)

Answer:

Volume = 1222.5cm³

Explanation:

If the question is about the volume of the rectangle:

The volume of a rectangle is obtained by the multiplication of its 3 dimensions: Length, width, height.

In the problem, the length of the rectangle is 0.162m = 16.2cm

The width is 7.7cm

And the height is 9.8cm

The volume is:

Volume = 16.2cm*7.7cm*9.8cm

Answer:

HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)

Explanation:

We have the products of a reaction and we have to predict the reactants. Since the products are salt and water, this must be a neutralization reaction. In a neutralization reaction, an acid reacts with a base. To form NaClO₃, the acid must be HClO₃(aq) and the base NaOH(aq). The balanced chemical equation is:

HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)

Answer:

By definition, a pure substance or a homogeneous mixture consists of a single phase. A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead form two separate layers.

Explanation:

Sorry only knew the answer to the first question

Answer:

To make a saturated solution, 36 gm of sodium chloride is dissolved in 100 gm of water at 293 K. Find its concentration at this temperature.

Mass per cent is a way of expressing a concentration or describing the component in a particular mixture. The solution composition can be expressed in mass percentage that depicts the mass of solute present in a given mass of solution.

The quantity of solute is expressed in mass or by moles. For a solution, the mass per cent is described as the grams of solute per grams of solution, multiplied by 100 to get the percentage.

Concentration

Mass of sodium chloride (Solute) = 36gm

Mass of water (solvent) = 100 gm

Mass of solution = 36+100

∴ Mass of solution = 136 gm

Concentration = (Mass of Solute / Mass of Solution) * 100

Concentration = (36/136) × 100

Concentration = 26.47%

Temperature

If temperature increases, solubility increases and if temperature decreases, solubility decreases.

It is possible to distinguish the particles of solute from those of solvent in a suspension, since particle size is bigger in suspensions, hence it is easier to distinguish the particles of solute.

Explanation:

The number of replaceable electrons in an atom is called its valency.

Examples

Thanks !

☺️☺️☺️☺️☺️☺️☺️

Answer:

the combining capacity if an atom is know as valency.

the property of an element that determines the number of other atimd with an aton if the element can combine.

Answer:

Where the products are H2O and Ba(NO3)2

Explanation:

A base, as, barium hydroxide (Ba(OH)2) reacts with an acid (HNO3), producing water (H2O), and the related salt (Ba(NO3)2) in a reaction called neutralization reaction.

The balanced reaction is:

Ba(OH)2 + 2 HNO3 → 2 H2O + Ba(NO3)2

Where the products are H2O and Ba(NO3)2

Answer:

b

Explanation:

deposition is when water turns from gas to solid. b is the only one that fits

Deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

Deposition is a process that involves collection of large mass or when mean distance between molecules are reduced. It can also be explained as gathering of substances together to form a larger mass.

Therefore, the phenomenon explained in the given example about deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

Learn more about deposition here: https://brainly.com/question/6110024

Answer:

how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?

Answer:

M of HNO₃ is 0.119M

Explanation:

A basic concept of titration is that in equivalence point:

mmoles of acid = mmoles of base

We have data from base and we only have data from volume of acid.

In a case our titration is a strong acid against a strong base.

We apply formula:

M of acid . Vol of acid = M of base . Vol of base

M of acid . 21.8 mL = 0.137M . 19 mL

M of acid = (0.137M . 19 mL) / 21.8 mL

M of acid = 0.119 M

When we neutralize all the titrant we reach the equivalence point.

At this point, pH = 7

2HNO₃  +  Ca(OH)₂ → Ca(NO₃)₂ +  2H₂O

Answer:

The front passenger airbag has a volume of around 140 l and fully inflates in around 35 ms. The process is similar for side airbags (thorax airbags).

Explanation:

From the question given above, the following data were obtained:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Number of half-lives (n) =?

n = t / t½

Finally, we shall determine the percentage remaining. This can be obtained as follow:

Let the original amount be N₀

Let the amount remaining be N

Number of half-lives (n) = 60 / 9.7

N = N₀ / 2ⁿ

Divide both side by N₀

N/N₀ = 1/2ⁿ

N/N₀ = 1 / 2⁽⁶⁰÷⁹•⁷⁾

N/N₀ = 0.0137

Multiply by 100 to express in percentage

N/N₀ = 0.0137 × 100

Therefore, the percentage remaining after 60 days is 1.37%

Learn more: https://brainly.com/question/14883322

Answer:

A, B, C and D

Explanation:

It can result for all of the choices mentioned.

Not following safety and procedure for handling hazardous material results in illness, death, injury, and HIPAA violation. Thus, all options are correct.

The hazardous material safety policy and measures are the standards set by HIPAA for the safety and precautionary measures that have been followed for reducing personal risk.

The hazardous materials have been chemicals, gases, flammables, and explosives. The inappropriate handling and not following the standard procedure results in illness, injury, death, and HIPAA violation. Thus, all the options are correct.

For more information about the hazardous material, refer to the link:

https://brainly.com/question/3520802

Answer:

In both cases, the gas evolved is H2. When calcium reacts with water the heat evolved is not suffcient for hydrogen to catch fire. On the other hand, sodium metal reacts with water violently and in this case a lot of heat is evolved which is sufficient for hydrogen to catch fire.

Explanation:

may this answer is helpful for you

Hydrogen

The reaction is given by

[tex]\boxed{\sf {Ca\atop Calcium}+{H_2O\atop Water}\longrightarrow {Ca(OH)_2\atop Calcium\:Hydroxide}+{H_2\atop Hydrogen}}[/tex]

Balanced equation:-

[tex]\boxed{\sf {Ca\atop Calcium}+{2H_2O\atop Water}\longrightarrow {Ca(OH)_2\atop Calcium\:Hydroxide}+{H_2\atop Hydrogen}}[/tex]

Answer:

State functions represent quantities or properties of a thermodynamic system, while non-state functions represent a process during which the state functions change. For example, the state function PV is proportional to the internal energy of an ideal gas, but the work W is the amount of energy transferred as the system performs work.

Explanation:

Explanation:

here's the answer to your question about

Answer:

boiling point elevation - colligative property

color - non-colligative property

freezing point depression - colligative property

vapor pressure lowering - colligative property

density - non-colligative property

Explanation:

A colligative property is a property that depends on the number of particles present in the system.

Freezing point depression, boiling point elevation and vapour pressure lowering are all colligative properties of solutions.

Colour and density do not depend on the number of particles present hence they are not colligative properties.

The boiling point elevation, freezing point depression, and vapor pressure lowering are colligative properties. And color and density are non-colligative properties.

Explanation:

So, from this, we can conclude that boiling point elevation, freezing point depression, and vapor pressure lowering are colligative properties. And color and density are non-colligative properties.

Learn more about colligative properties here:

brainly.com/question/10323760?referrer=searchResults

brainly.com/question/4227527?referrer=searchResults

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Answer:

A

Explanation:

helium (alpha particle)

Answer:

[OH⁻] = 4.3 x 10⁻¹¹M in OH⁻ ions.

Explanation:

Assuming the source of the carbonate ion is from a Group IA carbonate salt (e.g.; Na₂CO₃), then 0.115M Na₂CO₃(aq) => 2(0.115)M Na⁺(aq) + 0.115M CO₃²⁻(aq). The 0.115M CO₃²⁻ then reacts with water to give 0.115M carbonic acid; H₂CO₃(aq) in equilibrium with H⁺(aq) and HCO₃⁻(aq) as the 1st ionization step.

Analysis:

            H₂CO₃(aq)     ⇄     H⁺(aq)    +    HCO₃⁻(aq); Ka(1) = 4.3 x 10⁻⁷

C(i)          0.115M                      0                  0

ΔC              -x                        +x                  +x

C(eq)    0.115M - x                   x                    x

            ≅ 0.115M

Ka(1) = [H⁺(aq)][HCO₃⁻(aq)]/[H₂CO₃(aq)] = [(x)(x)/(0.115)]M = [x²/0.115]M

= 4.3 x 10⁻⁷  => x = [H⁺(aq)]₁ = SqrRt(4.3 x 10⁻⁷ · 0.115)M = 2.32 x 10⁻⁴M in H⁺ ions.

In general, it is assumed that all of the hydronium ion comes from the 1st ionization step as adding 10⁻¹¹ to 10⁻⁷ would be an insignificant change in H⁺ ion concentration. Therefore, using 2.32 x 10⁻⁴M in H⁺ ion  concentration, the hydroxide ion concentration is then calculated from

[H⁺][OH⁻] = Kw => [OH⁻] = (1 x 10⁻¹⁴/2.32 x 10⁻⁴)M = 4.3 x 10⁻¹¹M in OH⁻ ions.

________________________________________________________

NOTE: The 2.32 x 10⁻⁴M  value for [H⁺] is reasonable for carbonic acid solution with pH ≅ 3.5 - 4.0.

The concentration of hydroxide ion of given solution is 4.3 x 10⁻¹¹M.

We can calculate the concentration of hydroxide ions as follow:

[OH⁻][H⁺] = 10⁻¹⁴

Given chemical reaction with ICE table shown as below:

                H₂CO₃(aq)     ⇄     H⁺(aq)    +    HCO₃⁻(aq)

Initial:             0.115                      0                    0

Change:           -x                        +x                  +x

Equilibrium:  0.115-x                   +x                  +x

Given that, Ka = 4.3 x 10⁻⁷

Equilibrium constant for this reaction is written as:

Ka = [H⁺][HCO₃⁻]/[H₂CO₃]

4.3 x 10⁻⁷ = x² / 0.115

x = 2.32 x 10⁻⁴M = [H⁺]

Now we calculate the concentration of hydroxide ion as:

[OH⁻][H⁺] = 10⁻¹⁴

[OH⁻] = 10⁻¹⁴ / 2.32 x 10⁻⁴ = 4.3 x 10⁻¹¹M

Hence, value of [OH⁻] is 4.3 x 10⁻¹¹M.

To know more about pH & pOH, visit the below ink:

https://brainly.com/question/24595796

Answer:

1 cell wall

2 yes

3 chloroplast

4 photosynthesis

5 Deoxyribonucleic acid (I believe)

hope this helped a little and pls mark brainiest if it did :)

Explanation:

The cell wall is a rigid layer that is found outside the cell membrane and surrounds the cell, providing structural support and protection.

Answer:

с

Explanation:

the first quantum number of an electron gives the information about the energy level the electron is in

The information first quantum number of an electron give is the energy level the electron is in.

Quantum numbers is a set of symbols which gives idea about the position  of electron present inside an atom.

Hence first quantum number of electron gives ideal about the energy level.

To know more about quantum numbers, visit the below link:
https://brainly.com/question/11575590

Answer:

A. tungsten

Explanation:

Tungsten is a material which high melting point ie. does not melt easily incase of high temperature

Answer:

option(A):Tungsten

Explanation:

tungsten has highest melting point.

Answer: Hợp chất CTHH 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 70 °C

Actini(III) hydroxide Ac(OH)3   0,0022    

Amonia NH3 1176 900 702 565 428 333 188

Amoni azua NH4N3 16  25,3  37,1  

View 42 more rows  

                    hehe

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

Answer:

D) these all have the same boiling point

Answer:

d

Explanation:

since it is much convenient since the email will not get lost and it's contents will not be forgotten