Answer:
Voucher system.
Explanation:
voucher system can be regarded as methodused in authorizing when it comes to disbursement of cash. A voucher that will give identification of
amount, account number that is needed to pay on is been filled.
It should be noted that the A set of procedures and approvals for verifying, approving and recording liabilities for eventual cash payment, and for issuing checks for payment only of verified, approved, and recorded liabilities is referred to as Voucher system..
A company purchased equipment valued at $66000. It traded in old equipment for a $9000 trade in allowance. The old equipment cost $44000 and accumulated depreciation of $36000. This transaction has commercial substance. What is the recorded value of the new equipment?
Answer:
11000.
Explanation:
Is the answer to this question
Mustang Corporation has accumulated the following accounting data for the month of April: Finished goods inventory, April 1$32,400 Finished goods inventory, April 30 26,400 Total cost of goods manufactured 122,900 The cost of goods sold for the year is:
Answer:
$128,900
Explanation:
Cost of goods sold calculation
Opening Finished goods inventory $32,400
Add cost of goods manufactured $122,900
Less Closing Finished goods inventory ($26,400)
Cost of goods sold $128,900
therefore,
The cost of goods sold for the year is $128,900.
A cost-benefit analysis of a highway is difficult to conduct because analysts a. are unlikely to have access to costs on similar projects. b. cannot estimate the explicit cost of a project that has not been completed. c. are not able to consider the opportunity cost of resources. d. will have difficulty estimating the value of the highway.
Answer:
d. will have difficulty estimating the value of the highway.
Explanation:
Cost-benefit analysis (CBA) is used to examine and compare the cost associated with a project or task and the benefits derived from it.
Simply stated, cost-benefit analysis is a form of utilitarianism commonly used by individuals, business firms and government in the decision-making process, as all the cost incurred are determined and analyzed.
This ultimately implies that, it may be used to determine how changes in differing levels of activities such as costs and volume affect a company's operating income and net income.
Cost-benefit analysis (CBA) sums the total cost associated with a project (activity) and compares this cost against the total benefits that would be generated. Thus, it helps in the decision-making process by comparing the net present value (NPV) of the cost of a particular project with the net present value (NPV) of its benefits.
In this context, the cost-benefit analysis of a highway would be difficult to conduct because analysts will have difficulty estimating the value of the highway.
This ultimately implies that, the value or cost benefits associated with the highway is difficult to ascertain or estimate.
$ 485,000 $ 432,000 $Enter a dollar amount Enter percentages rounded to 0 decimal places % Inventory $ 786,000 $ 617,000 $Enter a dollar amount Enter percentages rounded to 0 decimal places % Total assets $3,111,000 $2,707,000 $Enter a dollar amount Enter percentages rounded to 0 decimal places %
Answer:
Accounts receivable
Dec 31, 2017 = $485,000
Dec 31, 2016 = $432,000
Amount = $53,000
Percentage = $53,000/$432,000
Percentage = 0.1226852
Percentage = 12%
Inventory
Dec 31, 2017 = $786,000
Dec 31, 2016 = $617,000
Amount = $169,000
Percentage = $169,000 / $617,000
Percentage = 0.2739060
Percentage = 27%
Total assets
Dec 31, 2017 = $3,111,000
Dec 31, 2016 = $2,707,000
Amount = $404,000
Percentage = $404,000/$2,707,000
Percentage = 0.1492427
Percentage = 15%
Recology CleanScapes, formed when CleanScapes of Seattle merged with San Francisco–based Recology, provides recycling services to about 800,000 residential and commercial customers in four western states. The employee-owned company’s motto is "WASTE ZERO," and it is an industry leader in the waste reduction and recovery industry. Recology CleanScapes has credited much of its financial success, low employee turnover, and high customer satisfaction to open-book management.
Recycling is a worldwide industry. If Recology CleanScapes decided to expand by acquiring companies in other countries, which of the following issues should managers take into consideration when deciding where and how to operate? Check all that apply.
A- In some countries, like China and India, it is not customary to publicly disclose company financial information.
B- In countries with high power distance, where inequality between managers and employees is expected, companies may have difficulty using open-book management.
C- Employees in some countries are not sufficiently well educated to understand company financial information.
Answer:
A- In some countries, like China and India, it is not customary to publicly disclose company financial information. B- In countries with high power distance, where inequality between managers and employees is expected, companies may have difficulty using open-book management.Explanation:
Using open book management would mean disclosing financial information to ensure that employees know how best to use that information to push the company forward. If this is looked down upon in a country like in China and India, Recology would not be able to properly implement its open-book management style so it should take that into consideration.
This is the same problem as countries with high power distance. Inequality is expected and even encouraged between managers and employees yet Recology practices open-book management which actually tries to reduce this equality so Recology needs to properly consider such countries before they move in.
The managers must take into consideration when deciding where and how to operate is that;
In countries with high power distance, where inequality between managers and employees is expected, companies may have difficulty using open-book management.
When there is high power distances, lower-ranking citizens and employees is prone to accept and expect that power will not be distributed equally, and this also makes politicians and business leaders are distanced or isolated from others.
In business, managers need consider the following; information, time, personnel, equipment, and supplies and and also note any limiting factors.
Managers should boast the morale of employees so as to focus on their individual job performance and reward them for individual result.
Learn more from
https://brainly.com/question/17551436
An expansion/ boom can be stabilized/fixed by following expansionary fiscal policy. Expansionary monetary policy used to fix stagflation can worsen the problem of inflation. Recession caused by a negative demand shock is fixed by an expansionary monetary policy. A boom can be stabilized/fixed by following contractionary monetary policy.
Answer:
An expansion/ boom can be stabilized / fixed by following expansionary fiscal policy.
Explanation:
The statement mentioned above is not correct, rest of all the statements are correct. An expansionary fiscal policy is used when money supply is increase in the economy. This will raise spending and taxes will be cut down in order to increase investments in the country.
As Kyle conducts his annual evaluations of his employees, he notices that Connie and Debbie have both been less productive since they were relocated in the same department. Kyle is in what stage of the managerial decision-making process?
Answer:
Identifying the problem or opportunity.
Explanation:
During this stage, Kyle is first trying to determine what aspects of the firm are troublesome or underperforming. The whole point of doing this is to identify the areas that need some actions or decisions made.
The next step would be to generate alternatives.
Suppose Blue Hamster Manufacturing Inc. is evaluating a proposed capital budgeting project (project Beta) that will require an initial investment of $3,225,000. The project is expected to generate the following net cash flows:
Year Cash Flow
Year 1 $275,000
Year 2 $475,000
Year 3 $425,000
Year 4 $400,000
Blue Hamster Manufacturing Inc.'s weighted average cost of capital is 7%, and project Beta has the same risk as the firm's average project. Based on the cash flows, what is project Beta's NPV?
Answer and Explanation:
The computation of the net present value is shown below:
Year Cash flows Discount factor at 7% Present value
0 -$3,225,000 1 -$3,225,000
1 $275,000 0.934579439 $257,009.3458
2 $475,000 0.873438728 $414,883.3959
3 $425,000 0.816297877 $346,926.5977
4 $400,000 0.762895212 $305,158.0848
Net present value -$1,901,022.576
Once a good or service nears the end of its product life cycle, the firm recognizes that Multiple Choice it is impossible to revert to an earlier stage of the model. it can return to an earlier stage through creative marketing. it will enjoy relatively high profits. marketing dollars spent now will provide little benefit.
Answer:
it can return to an earlier stage through creative marketing.
Explanation:
A product life cycle can be defined as the stages or phases that a particular product passes through, from the period it was introduced into the market to the period when it is eventually removed from the market.
Generally, there are four (4) stages in the product-life cycle;
1. Introduction.
2. Growth.
3. Maturity.
4. Decline.
A product that is at the decline stage is generally referred to as a failed product and wouldn't generate profit or much revenue for the manufacturer because it has little economic importance.
However, once a good or service nears the end of its product life cycle i.e it's at the decline stage, the business firm recognizes that it can return to an earlier stage where it offers satisfaction to the consumers and generate revenue, through creative marketing.
Marketing can be defined as the process of developing promotional techniques and sales strategies by a firm, so as to enhance the availability of goods and services to meet the needs of the end users or consumers through advertising and market research. Thus, it comprises of all the activities such as, identifying, anticipating set of medium and processes for creating, promoting, delivering, and exchanging goods and services that has value for customers. It typically, involves understanding customer needs, building and maintaining healthy relationships with them in order to scale up your business.
Juniper Design Ltd. of Manchester, England, is a company specializing in providing design services to residential developers. Last year the company had net operating income of $430,000 on sales of $1,300,000. The companyâs average operating assets for the year were $1,500,000 and its minimum required rate of return was 10%.
Required:Compute the companyâs residual income for the year.Average Operating Assets-Net Operating Income-Minimum required return-Residual income-
Answer: $280,000
Explanation:
Residual income can be calculated by the formula:
= Net operating income - (Average operating asset * Minimum required rate)
= 430,000 - (1,500,000 * 10%)
= 430,000 - 150,000
= $280,000
Prior to recording adjusting entries, the Office Supplies account had a $490 debit balance. A physical count of the supplies showed $175 of unused supplies available. The required adjusting entry is: debit/credit [ Select ] to [ Select ] account for [ Select ] debit/credit [ Select ] to [ Select ] account for [ Select ]
Answer: See explanation
Explanation:
Based on the information that's provided in the question, the required adjusting entry goes thus:
Unadjusted ending balance of supplies = $490
Actual supplies ending balance existing physically = $175
From the information above, the supplies used during the period will be:
= $490 - $175
= $315
Therefore,
Debit office supplies expenses $315 Credit office supplies account $315
On March 1, 2018, Lewis Services issued a 5% long-term notes payable for $25,000. It is payable over a 5-year term in $5,000 principal installments on March 1 of each year, beginning March 1, 2019. Which of the following entries needs to be made on March 1, 2018?
A. Long - Term Notes Payable 25,000
Accounts Payable 25,000
B. Long - Term Notes Payable 5,000
Cash 5,000
C. Cash 25,000
Long - Term Notes Payable 25,000
D. Current Portion of Long - Term Notes Payable 25,000
Long - Term Notes Payable 25,000
Answer:
C. Cash 25,000
Long - Term Notes Payable 25,000
Explanation:
Based on the information given we were told that on MARCH 1, 2018, the company issued a 5% long-term notes payable for the amount of $25,000 which therefore means that the appropriate journal entries that is needed to be made on March 1, 2018 will be:
March 1, 2018
Dr Cash $25,000
Cr Long term notes payable $25,000
You paid $9,700 for a $10,000 par value Treasury bill maturing in 3 months. What is the holding-period return if you hold the treasury bill until maturity
Answer:
The holding-period return if the treasury bill is held until maturity is:
= $300.
Explanation:
a) Data and Calculations:
Par value of Treasury bill = $10,000
Price paid for the bill = 9,700
Holding-period return = $300
Maturity period of the bill = 3 months
b) The holding-period return, otherwise called the yield, is the total return earned on the Treasury bill investment during the 3 months that it is held. The holding period is the 3-months time the Treasury bill is held by an investor, which corresponds to the period between the purchase date and sale date of the Treasury bill.
Ayayai Corp. uses a periodic inventory system. Its records show the following for the month of May, in which 69 units were sold.
Date Explanation Units Unit Cost Total Cost
May 1 Inventory 32 $8 $256
15 Purchase 25 9 225
24 Purchase 41 10 410
Total 98 $891
Calculate the weighted-average unit cost. (Round answer to 3 decimal places, e.g. 5.125.)
Weighted-average unit cost $____
Calculate the ending inventory at May 31 using the FIFO, LIFO and average-cost methods. (Round answers to 0 decimal places, e.g. 125.)
FIFO LIFO Average Cost
$____ $____ $_______
Answer:
a. Weighted-average unit cost = $9.092
b. We have:
Ending inventory at May 31 using the FIFO method = $290
Ending inventory at May 31 using the LIFO method = $232
Ending inventory at May 31 using the average-cost method = $264
Explanation:
a. Calculate the weighted-average unit cost. (Round answer to 3 decimal places, e.g. 5.125.)
Weighted-average unit cost = Total Cost of units of inventory available for sale / Total units of units of inventory available for sale = $891 / 98 = $9.092
b. Calculate the ending inventory at May 31 using the FIFO, LIFO and average-cost methods. (Round answers to 0 decimal places, e.g. 125.)
Ending inventory in units = Total units of units of inventory available for sale – Units sold = 98 - 69 = 29
Therefore, we have:
Ending inventory at May 31 using the FIFO method = Ending inventory in units * Unit cost of purchases on May 24 = 29 * $10 = $290
Ending inventory at May 31 using the LIFO method = Ending inventory in units * Unit cost of inventory on May 1 = 29 * $8 = $232
Ending inventory at May 31 using the average-cost method = Ending inventory in units * Weighted-average unit cost = 29 * $9.092 = $264
The strategic plan of a solar energy company that manufactures high-efficiency solar cells includes an expansion of its physical plant in 4 years. The manager in charge of planning estimates the expenditure required to be $1.17 million in 4 years. The company plans to sets aside $1 million now into an account that earns interest equal to the rate of inflation. What will the inflation rate have to be in order for the company to have exactly the right amount of money for the expansion?
a) 4%
b) 2%
c) Unknown
d) 6%
Answer:
The answer is "Option a".
Explanation:
Given:
FV=1.17
PV=1
n=4
We are aware of a future value formula that is:
[tex]FV = PV\times (1 + i)^n[/tex]
Put the value into the above formula:
[tex]\to 1.17 = 1\times (1 + i)^{4}\\\\\to 1.04 = (1 + i)\\\\\to 1.04 -1 = i\\\\\to i=0.04\\\\[/tex]
Calculating the percentage of i= 4%
Therefore The rate of interest is equivalent to the inflation rate, which is projected predicted, according to global meta and experts, The Us will reach 5.70 percent even by conclusion of the this year. In the future, we anticipate that the inflation rate in the US is 3.20 in twelve months.
A company has an overhead application rate of 124% of direct labor costs. How much overhead would be allocated to a job if it required total labor costing $24,000?
Answer:
$29,760
Explanation:
Overhead application rate = 124% of direct labor cost
The required total labor costing = $24,000
Total overhead applied = Overhead application rate * $24,000
Total overhead applied = 124% * $24000
Total overhead applied = $29,760
As discussed in the lecture video, Crocs’ plastic molding and sandal design capabilities have provided the firm with only a temporary competitive advantage, as incumbent firms began selling sandals that were very similar to the Crocs’ clogs. Crocs lost its competitive advantage primarily because of ___________
Answer: c. competitor imitation
Explanation:
When a company makes a good product that people like and therefore brings in profit, other companies will copy that product if it is not protected by law so that they too can make profit as well.
This is what happened to the Crocs' clogs. Other companies imitated them and so Crocs lost their competitive advantage. This led to prices falling for such footwear as the supply increased. It is for this reason that companies try to get patents when they make a product.
A company would like to invest in a capital budget project that will be worth $500,000 in 40 years. How much should this company invest today, assuming an average inflation rate of 2% and a 10% annual return
Answer:
Company needs to invest amount = $23000
Explanation:
Below is the calculation of the present value:
Given the future value, FV = $500000
Number of years, n = 40 years
Real interest rate = 10% - 2% = 8%
Present value = ?
Present value = FV (P/F, r, n)
Present value = $500000 (P/F, 8%, 40)
Present value = $500000 (0.046)
Present value = $23000
Company needs to invest amount = $23000
Steve is the librarian in his city's library. The library provides group diability insurance where premiums are paid by employees with after-tax dollars. He enrolls in a policy through the employer that provides a benefit of $4,200 a month. If he is in the 25% tax bracket and is disabled, what are his benefits after tax?
a. $0.
b. $1,050.
c. $3,150.
d. $4,200.
Answer: $4200
Explanation:
Tax benefit refers to the reduction in the tax liability which is enjoyed by an individual and helps the individual reduce his or her tax burden.
Since we are already given the information that Steve enrolls in a policy through the employer that provides a benefit of $4,200 a month, then his benefits after tax is $4200.
Which of the following statements is incorrect? Employment insurance compensation encourages longer job searches, which may lead to a better match between jobs and employees. Employment insurance compensation increases the opportunity cost of being unemployed. The typical employment insurance compensation is roughly one third of one's latest salary for up to 26 weeks. Demand and supply curves for labor are constantly shifting.
Answer:
Employment insurance compensation increases the opportunity cost of being
unemployed.
Explanation:
The Employment insurance program is the benefit that is provided temporarily to the people who do not have jobs or had lost their jobs of no fault of their own. This program helps the unemployed with financial help temporarily so that they can survive and search for another jobs.
The compensations provided from the employment insurance encourages the people for a longer job search and better match between the employees and the jobs. This financial aid is provided for up to a maximum of 26 months and for 1/3rd of one's latest salary. The demand and supply curve for te labor is shifting constantly.
Thus the incorrect statement is :
Employment insurance compensation increases the opportunity cost of being
unemployed.
Edwards Manufacturing Company purchases two component parts from three different suppliers. The suppliers have limited capacity and no one supplier can meet all the company's needs. In addition, the suppliers charge different prices for the components. Component price data (in price per unit) are as follows:Supplier Component 1 2 31 $10 $12 $142 $10 $10 $11Each supplier has a limited capacity in terms of total number of components it can supply. However, as long as Edwards provides sufficient advance orders, each supplier can devote its capacity to component 1, component 2, or any combination of the two components, if the total number of units ordered is within its capacity. Supplier capacities are as followsSupplier 1 2 3Capacity 600 1050 775If the Edwards production plan for the next period includes 1050 units of component 1 and 800 units of component 2, what purchases do you recommend? The is, how many units of each component should be ordered from each supplier?Supplier 1 2 3Component 1 Component 2 What is the total purchase cost for the components?
Answer:
Edwards Manufacturing Company
1. Number of units to order from each supplier:
Suppliers 1 2 3 Total
Component 1 600 450 0 1,050
Component 2 0 600 200 800
Total ordered 600 1,050 200 1,850
2. The total purchase cost for the components is:
= $19,600.
Explanation:
a) Data and Calculations:
Component price
Supplier 1 2 3
Component 1 $10 $12 $14
Component 2 $10 $10 $11
Suppliers' Capacities
Supplier 1 2 3
Component 1
Component 2
Total capacity 600 1,050 775
Edwards Production Plan
Component 1 = 1,050 units
Component 2 = 800 units
Objective:
Minimize Total Cost = $19,600
Constraints:
Total Supplier 1 <= 600
Total Supplier 2, <= 1,050
Total Supplier 3, <= 775
Total Component 1, = 1,050
Total Component 2, = 800
Component 1 Component 2
Suppliers 1 2 3 1 2 3
Numbers of units to
order from supplier 600 450 0 0 600 200
Total units 1,050 + 800
Component 1 Component 2
Suppliers 1 2 3 1 2 3
Numbers of units to
order from supplier 600 450 0 0 600 200
Price of units $10 $12 $14 $10 $10 $11
Total costs $6,000 $5,400 $0 $0 $6,000 2,200
= $19,600
Number of units to order from each supplier:
Suppliers 1 2 3 Total
Component 1 600 450 0 1,050
Component 2 0 600 200 800
Total ordered 600 1,050 200 1,850
Capacity of suppliers 600 1,050 775
Camaro GTO Torino Cash $ 2,000 $ 110 $ 1,000 Short-term investments 50 0 580 Current receivables 350 470 700 Inventory 2,600 2,420 4,230 Prepaid expenses 200 500 900 Total current assets $ 5,200 $ 3,500 $ 7,410 Current liabilities $ 2,000 $ 1,000 $ 3,800 Compute the current ratio and acid-test ratio for each of the following separate cases.
Answer:
Current Ratio :
Camaro = 2.6
GTO = 3.5
Torino = 1.95
Acid Test Ratio :
Camaro = 1.3
GTO = 1.08
Torino = 0.84
Explanation:
The current ratio and acid-test ratio for each of the following separate cases will be as follows
Current ratio = Current Assets ÷ Current Liabilities
Camaro = 2.6
GTO = 3.5
Torino = 1.95
Acid Test Ratio = (Current Assets - Inventory) ÷ Current Liabilities
Camaro = 1.3
GTO = 1.08
Torino = 0.84
Delta Company produces a single product. The cost of producing and selling a single unit of this product at the company’s normal activity level of 86,400 units per year is: Direct materials $ 1.50 Direct labor $ 2.00 Variable manufacturing overhead $ 0.60 Fixed manufacturing overhead $ 3.75 Variable selling and administrative expenses $ 1.90 Fixed selling and administrative expenses $ 1.00 The normal selling price is $25.00 per unit. The company’s capacity is 122,400 units per year. An order has been received from a mail-order house for 3,000 units at a special price of $22.00 per unit. This order would not affect regular sales or the company’s total fixed costs. Required: 1. What is the financial advantage (disadvantage) of accepting the special order? 2. As a separate matter from the special order, assume the company’s inventory includes 1,000 units of this product that were produced last year and that are inferior to the current model. The units must be sold through regular channels at reduced prices. The company does not expect the selling of these inferior units to have any effect on the sales of its current model. What unit cost is relevant for establishing a minimum selling price for these units?
Answer:
Delta Company
1. The financial advantage of accepting the special order is:
= $53,700.
2. The minimum selling price for these units that is relevant is:
= $4.10 (the unit variable manufacturing cost).
Explanation:
a) Data and Calculations:
Normal activity level per year = 86,400 units
Direct materials $ 1.50
Direct labor $ 2.00
Variable manufacturing overhead $ 0.60
Variable manufacturing cost per unit $4.10
Fixed manufacturing overhead $ 3.75
Variable selling and administrative expenses $ 1.90
Fixed selling and administrative expenses $ 1.00
The normal selling price = $25.00 per unit.
The company’s capacity is 122,400 units per year
Special Order:
Sales revenue $66,000 (3,000 * $22)
Cost of goods:
Variable manufacturing 12,300 (3,000 * $4.10)
Contribution margin $53,700
Drew Davis goes to his local bank to get help developing a financial plan and making investment decisions. Which of the more recent services banks offer is Drew taking advantage of
Answer: b. Getting financial advice
Explanation:
As the number of banks in the world increases, banks are having to offer more products and services apart from their traditional roles as lenders in order to remain relevant and competitive. One such product is giving financial advice.
Banks now offer advice on how to make better investment decisions, develop financial plans and even organize your estate. This is what Drew Davis was taking advantage of here.
Lakeview Engine, Inc., produces engines for the watercraft industry. An outside manufacturer has offered to supply several component parts used in the engine assemblies, which are currently being produced by Lakeview. The supplier will charge Lakeview $325 per engine for the set of parts. Lakeview’s current costs for those part sets are direct materials, $145; direct labor, $85; and manufacturing overhead applied at 100% of direct labor. Variable manufacturing overhead is considered to be 20% of the total, and fixed overhead will not change if the part sets are acquired from the outside supplier.
What would be the net cost advantage or disadvantage if Lakeview decided to purchase the parts?
Answer:
Lakeview Engine, Inc.
The net cost disadvantage if Lakeview decided to purchase the parts from the supplier per part is:
= $78
Explanation:
a) Data and Calculations:
Price by outside supplier per engine = $325
Current costs of manufacturing the engine:
Direct materials per unit = $145
Direct labor per unit = $85
Variable manufacturing overhead (20%) = $17
Fixed manufacturing overhead (80%) = $68
Total variable manufacturing cost per unit = $247
Incremental Analysis:
Make Buy Incremental
Production costs:
Variable manufacturing costs per unit:
Direct materials per unit $145
Direct labor per unit $85
Variable manufacturing per unit $17
Total variable manufacturing costs $247 $325 $78
b) Therefore, it costs more to Lakeview to buy the part from the outside supplier than it does when it makes it internally. Lakeview should continue making the parts.
Dixon Sales has four sales employees that receive weekly paychecks. Each earns $13 per hour and each has worked 40 hours in the pay period. Each employee pays 12% of gross in federal income tax, 3% in state income tax, 6.0% of gross in social security tax, 1.5% of gross in Medicare tax, and 0.5% in state disability insurance.
Required:
Journalize the recognition of the pay period ending January 19 that will be paid to the employees January 26.
Answer:
Jan. 19
Dr Sales Wages Expense $ 3,640.00
Cr Federal Income Tax Payable $ 436.80
Cr State Income Tax Payable $ 109.20
Cr Social Security Tax Payable $ 218.40
Cr Medicare Tax Payable $ 54.60
Cr State Disability Insurance $ 18.20
Cr Sales Wages Payable $ 2,802.80
Explanation:
Preparation of the journal for recognition of the pay period ending January 19 that will be paid to the employees January 26.
Jan. 19
Dr Sales Wages Expense $ 3,640.00 (7 *40 *13)
Cr Federal Income Tax Payable $ 436.80 (3,640 * 12%)
Cr State Income Tax Payable $ 109.20 (3,640 * 3%)
Cr Social Security Tax Payable $ 218.40 (3,640 * 6%)
Cr Medicare Tax Payable $ 54.60 (3,640* 1.5%)
Cr State Disability Insurance $ 18.20 (3,640 *0.5%)
Cr Sales Wages Payable $ 2,802.80
($3,640.00-$436.80-$109.20-$218.40-$54.60-$18.20)
The business intelligence environment includes all of the following except: A. BI Infrastructure B. Business Analytics C. Data from the business enviroment D. Cloud-based Storage
Answer: D. Cloud-based storage
Explanation:
Business Intelligence Environments consists of the various means and technologies that is used to collect, analyze, present and disseminate information relating to the business from both internal and external sources.
There are six components to Business Intelligence Environments which are:
BI InfrastructureBusiness AnalyticsData from the Business environment Managerial users and methodsDelivery platform - MIS, DSS, ESSUsers InterfaceThe only option that is not listed is Cloud-based storage so it is not part of the BI Environment.
The sources of economic growth are _______. A. work hours growth and labor productivity growth B. democracy and labor productivity growth C. job experience and low inflation D. work hours growth and a stable government
Answer:
A. work hours growth and labor productivity growth
Explanation:
An economy is a function of how money, means of production and resources (raw materials) are carefully used to facilitate the demands and supply of goods and services to meet the unending needs or requirements of the consumers.
Hence, a region's or country's economy is largely dependent on how resources are being allocated and utilized, how many goods and services are to be produced, what should be produced, for whom they are to be produced for and how much money are to be spent by the consumers to acquire these goods and services.
Basically, there are four (4) main types of economy and these are;
I. Mixed economy.
II. Free market economy.
III. Traditional economy.
IV. Command economy.
Generally, the sources of economic growth of a country are work hours growth and labor productivity growth.
Labor (working) is simply the human capital or workers who are saddled with the responsibility of overseeing and managing all the aspects of production.
Avery Company has two divisions, Polk and Bishop. Polk produces an item that Bishop could use in its production. Bishop currently is purchasing 26,000 units from an outside supplier for $16 per unit. Polk is currently operating at less than its full capacity of 630,000 units and has variable costs of $9 per unit. The full cost to manufacture the unit is $12. Polk currently sells 460,000 units at a selling price of $18 per unit.
a. What will be the effect on Avery Company’s operating profit if the transfer is made internally?
b. What is the minimum transfer price from Polk’s perspective?
c. What is the maximum transfer price from Bishop’s perspective?
Answer:
a. The effect is that Avery Company’s operating profit will increase by $182,000 if the transfer is made internally.
b. Minimum transfer price = $9
c. Maximum transfer price from Bishop’s perspective = $16.
Explanation:
a. What will be the effect on Avery Company’s operating profit if the transfer is made internally?
To determine this, fixed cost is ignored because it considered irrelevant. Therefore, we have:
Profit per unit = Purchase price from outside - Variable cost of production internally = $16 - $9 = $7
Total increment in operating profit = Current purchase unit of Bishop * Profit per unit = 26,000 * $7 = $182,000
Therefore, Avery Company’s operating profit will increase by $182,000 if the transfer is made internally.
b. What is the minimum transfer price from Polk’s perspective?
Since Polk is currently operating at less than its full capacity, this implies that it will not incur additional fixed cost to produce current purchase units of Bishop. Therefore, only its variable cost of $9 will have to recovered. By implication, we have:
Minimum transfer price = Variable cost = $9
c. What is the maximum transfer price from Bishop’s perspective?
Any price that is higher than $16 at which Bishop is currently purchasing from an outside supplier will result in a loss for Bishop and the increment profit of $182,000 will be lost by Avery Company. This therefore implies that:
Maximum transfer price from Bishop’s perspective = Price at which Bishop is currently purchasing from an outside supplier = $16
Which per unit cost does the slope of the total cost line represent? Group of answer choices Fixed Variable. Semivariable Step-variable
Answer: Variable cost
Explanation:
The slope of a regression line is meant to represent the change in the total variable or y, as a result of a change in the number of independent observations or x.
The cost that changes during production as a result of an increase in x which is the volume of products, is the variable cost so it is the slope of the total cost line,
Slope of total cost line:
y = mx + c
y = total cost
m = variable cost. m is also slope.
x = production volume
c = fixed cost
