Answer:
2, hydrogen
Explanation:
i think
Answer:
Answer is not hydrogen
Explanation:
did the test and got it wrong
A chamber contains equal molar amounts of He, Ne, Ar, and Kr. If the total chamber pressure is 1 atm, then the partial pressure (in atm) of Kr is:
Answer:
The correct answer is 0.25 atm.
Explanation:
As mentioned in the given question that the chamber comprises equal molar concentrations of He, Ne, Ar and Kr gas. So, let us assume that the moles of all the gases will be x then the total number of moles will be 4x.
The formula for calculating mole fraction is,
Mole fraction = mole of the substance/total moles
The mole fraction of Kr = x/4x = 0.25
The total pressure given in the chamber is 1 atm. Therefore, the partial pressure will be,
Partial pressure = mole fraction * Total pressure
Partial pressure = 0.25 * 1 = 0.25 atm.
The partial pressure of Kr is 0.25 atm.
We are told that there is an equal molar amounts of He, Ne, Ar, and Kr. If we decide to say, let the molar amount of each gas be x, the total number of moles of all the gases will now be; x + x+ x + x = 4x
Let us recall that partial pressure of a gas can be obtained form the formula;
Partial pressure = mole fraction × total pressure
Mole fraction of Kr = x/4x = 1/4
Total pressure = 1 atm
Partial pressure of Kr = 1/4 × 1 = 0.25 atm
Learn more: https://brainly.com/question/2510654
A student completed the experiment but found that the total amount of material recovered weighed more than the original sample. What is the most likely source of error and how may it be corrected?
Answer:
This is due to the water moisture present in the recovered sample.
Explanation:
The total amount of material recovered isn’t meant to weigh more than the original sample. However when this happens then it means there is the presence of water moisture in the recovered sample.
The recovered samples however needs to be heated to make it dry and eliminate the water moisture through evaporation.
Which of the following provides a characteristic of
MgO(s) with a correct explanation?
Choose 1 answer:
А
It is hard because its ions are held together by strong
electrostatic attractions.
B
It is malleable because its atoms can easily move past
one another without disrupting the bonding.
It is a poor conductor of electricity because its
electrons are tightly held within covalent bonds and
lone pairs.
It has a high melting point because its molecules
interact through strong intermolecular forces.
Answer:
А It is hard because its ions are held together by strong electrostatic attractions.
B It is malleable because its atoms can easily move past one another without disrupting the bonding.
Explanation:
These are correct explanations of the properties of magnesium.
C is wrong. Mg is a good conductor of electricity and it has metallic bonds.
D is wrong. Mg has no molecules. It has no intermolecular forces.
(9443+45−9.9) (9443+45−9.9) ×8.4× 10 6
The half-life of radium-226 is 1620 years. What percentage of a given amount of the radium will remain after 900 years
Answer:
68%
Explanation:
Since we need a percentage we can use any number we want for our initial value.
5(1/2)^900/1620 = 3.40
(3.40 / 5)*100 = 68%
To make sure lets use a different initial amount
1(1/2)^900/1620 = 0.68
(0.68/1) * 100 = 68%
To solve this question, we'll assume the initial amount of radium-226 to be 1.
Now, we shall proceed to obtaining the percentage of radium-226 that will after 900 years. This can be obtained as illustrated below:
Step 1Determination of the number of half-lives that has elapsed.
Half-life (t½) = 1620 years
Time (t) = 900 years
Number of half-lives (n) =?[tex]n = \frac{t}{t_{1/2}}\\\\n = \frac{900}{1620}\\\\n = \frac{5}{9}[/tex]
Step 2:Determination of the amount remaining
Initial amount (N₀) = 1
Number of half-lives (n) = 5/9
Amount remaining (N) =?[tex]N = \frac{N_{0} }{2^{n}}\\\\N = \frac{1}{2^{5/9}}[/tex]
N = 0.68Step 3Determination of the percentage remaining.
Initial amount (N₀) = 1
Amount remaining (N) = 0.68
Percentage remaining =?Percentage remaining = N/N₀ × 100
Percentage remaining = 0.68/1 × 100
Percentage remaining = 68%Therefore, the percentage amount of radium-226 that remains after 900 years is 68%
Learn more: https://brainly.com/question/10406952
Draw a structure for an alcohol that exhibits a molecular ion at M+ = 88 and that produces fragments at m/z = 73, m/z = 70 and m/z = 59.
Answer:
3-pentanol
Explanation:
In this case, we have alcohol as the main functional group (OH) with a molecular ion at 88. If the molecular ion is 88 the molar mass is also 88 g/mol therefore the formula for the unknown molecule is [tex]C_5H_1_2O[/tex].
Additionally, if the mass spectrum shows the molecular ion peak we can not have tertiary alcohols (tertiary alcohols often do not show M+ at all). So, the structures only can be primary and secondary structures.
With this in mind, our options are:
-) 1-pentanol
-) 2-pentanol
-) 3-pentanol
Now we can analyze each structure:
-) 1-pentanol
The structure must explain all the fragments produced (73, 70, and 59). In this primary alcohol, we will have an alpha cleavage (the red bond would be broken). If this has to happen, we will have fragments at 31 and 57. These fragments dont fit with the reported ones, therefore this is not a possible structure (See figure 1).
-) 2-pentanol
On this structure, we will have also an alpha cleavage (red bond). In this rupture we will have fragments at 45 and 43, these m/z values dont fit with the reported ones, therefore this is not a possible structure (See figure 1).
-) 3-pentanol
In this structure, we have the "OH" bonded to carbon three. So, we can analyze each fragment:
-) m/z 59
This fragment, can be explained as an alpha cleavage. But, in this case we have two ruptures that can produce the same ion. The carbons on both sides of the C-OH bond.
-) m/z 71
This fragment, can be explained as a loss of water (M-18) in which we have the production of a carbocation in the carbon where we previously have the C-OH bond.
-) m/z 73
This fragment, can be explained as a beta cleavage. But, in this case, also we have two ruptures that can produce the same ion. The methyl groups on each end molecule.
See figure 2
I hope it helps!
15. Calculate the critical angle of glass and water combination. Show your calculation. 16. What is the critical angle for the interface between Mystery A and glass
Answer:
15. Critical angle of glass and water combination, θ = 62.45°
16. Critical angle for the interface between Mystery A and glass, θ = 37.93°
Note; The question is incomplete. The complete question is as follows:
Medium Air Water Glass Mystery A Mystery B Table-2 Speed (m/s) 1.00 C 0.75 c 0.67 0.41 c 0.71 c n 1.00 1.33 1.50 Index of Refraction n of a given medium is defined as the ratio of speed of light in vacuum, c to the speed of light in a medium, v. n = c/v
Table-4: Incident Angle (degrees) Reflected Angle Refracted angle (degrees) (degrees) % Intensity of reflected ray 0 10 20 30 40 50 N/A N/A N/A 30 40 50 0 11.3 22.7 34.2 46.3 59.5 N/A N/A N/A 0.67 1.22 3.08 % Intensity of refracted ray 100 100 100 99.33 98.78 96.92
When rays travel from a denser medium to a less dense medium, we can define a critical angle of incidence θ such that refracted angle θ₂ = 90°. Applying Snell's law: Critical angle θ = sin-1(n₂/n₁).
When the angle of incidence is greater than the critical angle, 100% of the light intensity is reflected. This is called total internal reflection because all the light is reflected.
15. Calculate the critical angle of glass and water combination. Show your calculation.
16. What is the critical angle for the interface between Mystery A and glass?
Explanation:
15. Applying Snell's law; Critical angle θ = sin-1(n₂/n₁).
where n₂,refractive index of water = 1.33, n₁, refractive index of glass = 1.50 since glass is denser than water
θ = sin-1(1.33/1.50)
θ = 62.45°
Critical angle of glass and water combination, θ = 62.45°
16. Refractive index of mystery A , n = c/v
where v = 0.41 c
therefore, n = c / 0.41 c = 2.44
Critical angle for the interface between Mystery A and glass, θ = sin-1(n₂/n₁).
where n₂,refractive index of glass = 1.50, n₁, refractive index of mystery A = 2.44 since mystery A is denser than glass as seen from its refractive index
θ = sin-1(1.50/2.44)
θ = 37.93°
Critical angle for the interface between Mystery A and glass, θ = 37.93°
f a substance has a half-life of 8.10 hr, how many hours will it take for 75.0 g of the substance to be depleted to 3.90 g?
Answer:
35 hrs
Explanation:
half life of the substance [tex]t_{1/2 }[/tex] = 8.1 hr
initial amount [tex]N_{0}[/tex] = 75 g
The final amount [tex]N[/tex] = 3.9 g
The time elapsed [tex]t[/tex] = ?
we use the relationship
[tex]N[/tex] = [tex]N_{0}[/tex] [tex](\frac{1}{2} )^{\frac{t}{t_{1/2} } }[/tex]
substituting values, we have
3.9 = 75 x [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]
0.052 = [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]
take the log of both side
log 0.052 = log [tex]\frac{1}{2}^{\frac{t}{8.1} }[/tex]
log 0.052 = [tex]\frac{t}{8.1}[/tex] log 1/2
-1.284 = [tex]\frac{t}{8.1}[/tex] x -0.301
1.284 = 0.301t/8.1 =
1.284 = 0.0372t
t = 1.284/0.037 = 34.5 ≅ 35 hrs
Solid cesium bromide has the same kind of crystal structure as CsCl which is pictured below: If the edge length of the unit cell is 428.7 pm, what is the density of CsBr in g/cm3.
Answer:
[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]
Explanation:
Let recall the crystal structure of CsBr obtains a BCC structure. In a BCC structure, there exist only two atom per cell.
The density d of CsBr in g/cm³ can be calculated by using the formula:
[tex]\mathtt{ density \ d = \dfrac{z \times molar\ mass \ (M)}{ edge \ length \ (a) \ \times avogadro's \ number \ (N)}}[/tex]
where;
z = 1 mole of CsBr
edge length = 428.7 pm = (4.287 × 10⁻⁸)³ cm
molar mass of CsBr = 212.81 g/mol
avogadro's number = 6.023 × 10²³
[tex]\mathtt{ density \ d = \dfrac{1 \times 212.81}{(4.287 \times 10^{-8})^3 \times 6.023 \times 10^{23}}}[/tex]
[tex]\mathtt{ density \ d = \dfrac{ 212.81}{47.4540533}}[/tex]
[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]
Ammonia, methane, and phosphorus trihydride are three different compounds with three different boiling points. Rank their boiling points in order from lowest to highest.
A. CH4< NH3 < PH3
B. NH3 < PH3< CH4
C. CH4 < PH3 < NH3
D. NH3 < CH4< PH3
E. PH3< NH3 < CH4
Answer:
B. NH3 < PH3< CH4
Explanation:
Hello,
In this case, taking into account that the boiling point of ammonia, methane and phosphorous trihydrate are -33.34 °C , -161.5 °C and -87.7 °C , clearly, methane has the lowest boiling point (most negative) and ammonia the greatest boiling point (least negative), therefore, ranking is:
B. NH3 < PH3< CH4
Best regards.
Fireworks are chemical reactions that release energy. Which of these phenomena are caused by chemical reactions that release energy? If you’re not sure, make a guess.
Answer:
All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.
An enzyme is discovered that catalyzes the chemical reaction:SAD -------->HAPPY
<-------A team of motivated researchers sets out to study the enzyme which they call Happyase. They find that the Kcat for happyase is 600s-1. They carry out several experiments. When [Et]=20 nM and [SAD]=40 \mu M, the reaction velocity, Vo is 9.6 \mu Ms^{-1} . Calculate the Km for the substrate SAD.
Answer: Km = 10μM
Explanation: Michaelis-Menten constant (Km) measures the affinity a enzyme has to its substrate, so it can be known how well an enzyme is suited to the substrate being used. To determine Km another value associated to an eznyme is important: Turnover number (Kcat), which is the number of time an enzyme site converts substrate into product per unit time.
Enzyme veolcity is calculated as:
[tex]V_{0} = \frac{E_{t}.K_{cat}.[substrate]}{K_{m}+[substrate]}[/tex]
where Et is concentration of enzyme catalitic sites and has to have the same unit as velocity of enzyme, so Et = 20nM = 0.02μM;
To calculate Km:
[tex]V_{0}*K_{m} + V_{0}*[substrate] = E_{t}.K_{cat}.[substrate][/tex]
[tex]K_{m} = \frac{E_{t}.K_{cat}.[substrate]-V_{0}*[substrate]}{V_{0}}[/tex]
[tex]K_{m} = \frac{0.02*600*40-9.6*40}{9.6}[/tex]
Km = 10μM
The Michaelis-Menten for the substrate SAD is 10μM.
Write a balanced chemical equation for the base hydrolysis of methyl butanoate with NaOH. (Use either molecular formulas or condensed structural formulas, but be consistent in your equation.)
Explanation:
C5H10O2 + NaOH = C2H5COONa + C2H5OH
your result are : sodium propanoate and ethanol
A balanced chemical equation represents atoms and their numbers with their charge. The balanced equation for base hydrolysis is C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH.
What is hydrolysis?Base hydrolysis is the splitting of the ester linkage by the basic molecule. As the result the acidic ester portion makes the salt, and also alcohol is produced as the by-product.
The base hydrolysis of methyl butanoate is shown as,
C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH
Here, sodium propanoate and ethanol are produced by the splitting of methyl butanoate in the presence of the base (NaOH).
Therefore, C₅H₁₀O₂ + NaOH → C₂H₅COONa + C₂H₅OH is balanced reaction.
Learn more about hydrolysis here:
https://brainly.com/question/22078321
#SPJ2
Chlorine has an electronegativity value of 3.0. Given the electronegativity of N, O, and P (3.0, 3.5, and 2.1, respectively), which of the following molecules has nonpolar bonds?a. NCl3b. Cl2Oc. PCl3d. All of thesee. None of these
Answer:
a. NCl3
Explanation:
All the elements stated are non metals. Generally the bond between non metals is a covalent bond. However depending on how the electrons are shared, this bond can either be polar or non polar.
A non polar covalent bond is formed when the electrons are shared equally between the atoms.
A way to determine if a bond is non polar or polar covalent is by comparing the electronegativity values.
If the electronegativity difference is less than 0.5, it is regarded as a non polar covalent bond.
Going back to the question;
Between N and Cl; the electronegativity difference is 3.0 - 3.0 = 0
Between Cl and O; the electronegativity difference is 3.5 - 3.0 = 0.5
Between Cl and P; the electronegativity difference is 3.5 - 2.1 = 1.4
From these we can tell that the correct option is option A.
If a salt is formed by combining NH3 (Kb=1.8×10−5) and CH3COOH (Ka=1.8×10−5), an aqueous solution of this salt would be:
Answer:
Neutral
Explanation:
pKa of acid = -log Ka
= -log (1.8 x 10^-5)
= 4.74
pKb of base = -log Kb
= 4.74
pKa of acid = pKb of base
salt pH formula : pH = 7 + 1/2 [pKa -pKb ]
here pKa = pKb
so pH = 7
the salt it is CH3COONH4 exactly neutral solution .
If a salt is formed by combining NH₃ (Kb=1.8×10⁻⁵) and CH₃COOH (Ka=1.8×10⁻⁵), an aqueous solution of this salt would be neutral.
What information does pH convey?pH of any solution tells about the acidity or basicity or neutral nature of the solution.
pH of any solution is directly proportional to the acid dissociation constant value (Ka) and base dissociation constant (Kb). In the question it is given that,
Value of Kb for NH₃ = 1.8×10⁻⁵
Value of Ka for CH₃COOH = 1.8×10⁻⁵
Ka & Kb values for the base and acid is same means it dissociates with same extent. So the aqueous solution of this acid and base is a neutral in nature as they have same number of acid and base ions in it.
Hence resultant solution will be a neutral solution .
To know more about neutral solution, visit the below link:
https://brainly.com/question/13805901
16. The concentration of a solution of potassium hydroxide is determined by titration with nitric
acid. A 30.0 mL sample of KOH is neutralized by 42.7 mL of 0.498 M HNO3. What is the
concentration of the potassium hydroxide solution?
Answer:
[tex]M_{base}=0.709M[/tex]
Explanation:
Hello,
In this case, since the reaction between potassium hydroxide and nitric acid is:
[tex]KOH+HNO_3\rightarrow KNO_3+H_2O[/tex]
We can see a 1:1 mole ratio between the acid and base, therefore, for the titration analysis, we find the following equality at the equivalence point:
[tex]n_{acid}=n_{base}[/tex]
That in terms of molarities and volumes is:
[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]
Thus, solving the molarity of the base (KOH), we obtain:
[tex]M_{base}=\frac{M_{acid}V_{acid}}{V_{base}} =\frac{0.498M*42.7mL}{30.0mL}\\ \\M_{base}=0.709M[/tex]
Regards.
Check 0/1 ptRetries 5 Element R has three isotopes. The isotopes are present in 0.0825, 0.2671, and 0.6504 relative abundance. If their masses are 97.62, 109.3, and 138.3 respectively, calculate the atomic mass of element R.
Answer:
Atomic mass = 127.198 amu
Explanation:
The average atomic mass is obtained by summing the masses of the isotopes each multiplied by its abundance.
Atomic mass = (97.62 * 0.0825) + (109.3 * 0.2671) + (138.3 * 0.6504)
Atomic mass = 8.05365 + 29.19403 + 89.95032
Atomic mass = 127.198 amu
A closed-end manometer was attached to a vessel containing argon. The difference in the mercury levels in the two arms of the manometer was 9.60 cm. Atmospheric pressure was 783 mm Hg. The pressure of the argon in the container was ________ mm Hg.
Answer:
96 mmHg
[tex]h=96mmHg[/tex]
Explanation:
From this question,manometer end is closedw, So we can deduced that the height of the column will not be affected by the atmospheric pressure .
The difference of height of the mercury level is given as,
h=9.60cm
h=9.60(10mm/1cm)
[tex]h=96mm[/tex]
But it is obvious that in this closed end manometer.the pressure of the gas is equal to the height
P(gas)=h
P(gas)=96mmHg
This pressure is as a result of the presence of gas.
Therefore, the pressure of the argon gas in the container is 96mmHg.
The pressure of the argon in the container was 96mmHg.
We were told that the manometer has closed ends which means that the
height will not be affected by atmospheric pressure.
The height which is the difference in mercury level is
h=9.60cm
We can convert it to millimeter by multiplying it by 10
h=9.60 × 10 = 96mm
The pressure of the closed end manometer will be equal to the height
P(gas)=h
P(gas)=96mmHg
The pressure of the argon gas in the container is 96mmHg.
Read more on https://brainly.com/question/17151458
When titrating a strong acid with a strong base, after the equivalence point is reached, the pH will be determined exclusively by: Select the correct answer below:
A) hydronium concentration
B) hydroxide concentration
C) conjugate base concentration
D) conjugate acid concentration
Answer:
B) hydroxide concentration
Explanation:
Hello,
In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.
After that, due to the fact that the pH is related with the pOH as shown below:
pH=14-pOH
We can directly compute the pH.
Best regards.
The ΔHvap of nitrous oxide is 16.53 kJ · mol−1 and its ΔSvap is 89.51 J · mol−1 · K−1. What it the boiling point of nitrous oxide?
Answer:
[tex]T_b=-88.48\°C[/tex]
Explanation:
Hello,
In this case, since the entropy of vaporization is defined in terms of the enthalpy of vaporization and the boiling point of the given substance, nitrous oxide, as shown below:
[tex]\Delta _{vap}S=\frac{\Delta _{vap}}{T_b}[/tex]
Solving for the boiling point of nitrous oxide, we obtain:
[tex]T_b=\frac{\Delta _{vap}H}{\Delta _{vap}S}=\frac{16.53\frac{kJ}{mol}*\frac{1000J}{1kJ} }{89.51\frac{J}{mol} } \\ \\T_b=184.67K[/tex]
Which in degree Celsius is also:
[tex]Tb=184.67-273.15\\\\T_b=-88.48\°C[/tex]
Best regards.
what is non metal?
help meh
The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-1. it can not conduct heat and electricity1. it is netiher ductile not malleable3. it is not lsuturous and also not sonorous
Answer:
Non-metals are the elements which form negative ions by accepting or gaining electrons. Non-metals usually have 4, 5, 6 or 7 electrons in their outermost shell. Non-metals are those which lack all the metallic attributes. They are good insulators of heat and electricity. They are mostly gases and sometimes liquid.
Does a reaction occur when aqueous solutions of potassium hydroxide and chromium(III) bromide are combined
Explanation:
Potassium hydroxide = KOH
Chromium(iii)bromide = CrBr3
Yes! A reaction occurs. This is given by the balanced equation;
3 KOH + CrBr3 → 3 KBr + Cr(OH)3
(a) Identify the name of the method used below for the separation.
(b) Give one more application of this method of separation.
(c) What is the name for the line at position B ?
(d) what conclusions can you draw about the colours present in sweets C and D ?
Answer:
(a) Chromatography
(b) DNA fingerprinting
(c) Origin
(d) Sweet C consists of more colours than sweet D.
ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.
Explanation:
Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.
It can be used to determine the soluble constituents of a given mixture. And for purification purpose.
The standard free energy change for a reaction can be calculated using the equation ΔG∘′=−nFΔE∘′ ΔG∘′=−nFΔE∘′ where nn is the number of electrons transferred, FF is Faraday's constant, 96.5 kJ·mol−1·V−1, and ΔE∘′ΔE∘′ is the difference in reduction potential. For each of the given reactions, determine the number of electrons transferred (n)(n) and calculate standard free energy (ΔG∘′)(ΔG∘′) . Consider the half-reactions and overall reaction for reaction 1. half-reactions:fumarate 2−+2H+CoQH2↽−−⇀succinate−↽−−⇀CoQ+2H+ half-reactions:fumarate−+2H+↽−−⇀succinate2−CoQH2↽−−⇀CoQ+2H+ overall reaction:fumarate2−+CoQH2↽−−⇀succinate2−+CoQΔE∘′=−0.009 V
Answer:
ΔG°′ = 1.737 KJ/mol
Explanation:
The reaction involves the transfer of two electrons in the form of hydride ions from reduced coenzyme Q, CoQH₂ to fumarae to form succinate and oxidized coenzyme Q, CoQ.
The overall equation of reaction is as follows:
fumarate²⁻ + CoQH₂ ↽⇀ succinate²⁻ + CoQ ; ΔE∘′=−0.009 V
Using the equation for standard free energy change; ΔG°′ = −nFΔE°′
where n = 2; F = 96.5 KJ.V⁻¹.mol⁻¹; ΔE°′ = 0.009 V
ΔG°′ = - 2 * 96.5 KJ.V⁻¹.mol⁻¹ * 0.009 V
ΔG°′ = 1.737 KJ/mol
Please help, Which molecule is shown below
Answer:
Option B. 3–methylheptane.
Explanation:
To obtain the name of the compound given in the question above, we must
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent groups attached.
4. Locate the position of the substituent group attached by giving it the lowest possible count.
5. Combine the above to obtain the name.
Now let us name the compound given in the question above.
1. The compound is an alkane since it contains only single bond.
2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.
3. The substituent group attached is
—CH3 i.e methyl.
4. The substituent group attached is at carbon 3.
5. Therefore, the name of the compound is:
3–methylheptane.
20. What volume of 0.350M KMnO4 solution must be diluted to prepare 600. mL of
0.150M KMnO4 solution?
Answer:
25.7 mL
Explanation:
Step 1: Given data
Initial volume (V₁): ?Initial concentration (C₁): 0.350 MFinal volume (V₂): 600 mLFinal concentration (C₂): 0.150 MStep 2: Calculate the volume of the initial solution
We have a concentrated solution and we want to prepare a diluted one. We can calculate the initial volume using the dilution rule.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0.150 M × 600 mL / 0.350 M
V₁ = 25.7 mL
Susan was investigating which glue would make the strongest craft stick tower. She
tested rubber cement, Elmer's glue-all, and Super Glue. She will test the strength of the
towers with books as the weight.
What is the independent variable?
Answer:
glue that would make the strongest craft stick tower.
Explanation:
Independent variable: In statistics and research methods, the term "independent variable" is determined as a variable that is being changed, controlled, or altered in an experiment or research by the researcher or the experimenter to see its effect on DV or dependent variable. However, it is said that independent variable directly effect the dependent variable.
Methyl iodide reacts irreversibly with azide ion with rate = k[CH3I][N3–]. CH3I(aq) + N3–(aq) → CH3N3(aq) + I–(aq) The reaction is carried out with an initial concentration of CH3I of 0.01 M. Which statement about the reaction is correct?
Answer:
(D) The reaction cannot take place in a single elementary step
Explanation:
Statements are:
(A) The time it takes for [CH3I] to decrease to 0.005 M is independent of [N3-], as long as [N3] >> [CH3I].
B) If the initial concentrations of azide and CH3I are equal, then it takes half as long for [CH3I] to decrease to 0.005 M as it does for it to decrease from 0.005 M to 0.0025 M.
(C) The reaction rate is significantly smaller if excess I- is added to the solution.
(D) The reaction cannot take place in a single elementary step.
The rate of the reaction is:
rate = k[CH3I][N3–].
That means rate depends of concentration of CH₃I as much as N₃⁻ concentration
(A) The time it takes for [CH3I] to decrease to 0.005 M is independent of [N3-], as long as [N3] >> [CH3I]. FALSE. The reaction rate depends of N₃⁻ as much as CH₃I
B) If the initial concentrations of azide and CH3I are equal, then it takes half as long for [CH3I] to decrease to 0.005 M as it does for it to decrease from 0.005 M to 0.0025 M. FALSE. Reaction is second-order. Half-life is 1/K[A]₀. If initial concentration is 0.1M, to a concentration of 0.005M it takes:
1/K*0.1. If initial concentration is 0.005M it takes 1/K*0.005. That means it takes half to decrease from 0.005M to 0.0025 as it does for it to decrease from 0.01M to 0.005M.
(C) The reaction rate is significantly smaller if excess I- is added to the solution. FALSE. Reaction rate is independent of I⁻
(D) The reaction cannot take place in a single elementary step. TRUE. As this reaction is a single-replacement reaction implies the formation of 1 C-N bond. But also the rupture of the C-I bond is impossible to explain this kind of reaction in a single elementary step.
For each of the processes, determine whether the entropy of the system is increasing or decreasing.
a. A snowman melts on a spring day.
b. A document goes through a paper shredder.
c. A water bottle cools down in a refrigerator.
d. Silver tarnishes
e. Dissolved sugar precipitates out of water to form rock candy.
Explanation:
Entropy refers to the degree of disorderliness of a system.
a. A snowman melts on a spring day.
Entropy is increasing because there is a change in state of matter from solid to liquid. Liquid particles have more freedom f movement compared to solids.
b. A document goes through a paper shredder.
Entropy increases because random, disorganized bits of paper are left.
c. A water bottle cools down in a refrigerator.
Entropy decreases because temperature is directly proportional to entropy.
d. Silver tarnishes
Entropy increases because random bits of the sliver particles are formed.
e. Dissolved sugar precipitates out of water to form rock candy.
Entropy decreases because the random dissolved sugar precipitates are ordered into a rock candy.
Find the standard enthalpy of formation of iodine atoms. (Round your answer to one decimal place.) Standard enthalpy of formation
Answer:
Enthalpy of formation is the energy change when one mole of a substance is formed from its constituent atoms under standard conditions
