A solid cylinder having a diameter of 1.50 cm and a height of 5.15 cm has a mass of 95.56 g. Show the equations needed to calculate the density of a solid.

Answer:

C₆H₁₀NO

Explanation:

In order to arrive at a molecular formula we have to make some assumptions and they are

Assuming there is one ( 1 ) N and one ( 1 ) O that is present in the said molecule

Total mass =   29.998

next step: subtract the total mass from 112.0499 = 82.501

next : assume the presence of 6 carbon atoms in said molecule

Total mass =  6 * 12 = 72

Mass of Hydrogens = 82.501 - 72 = 10.501

∴ number of hydrogens = 10.501 / 1.0078  ≈ 10

Hence Total mass = 29.998 + 82.501  ≈ 112.0499

Finally Molecular formula = C₆H₁₀NO

Answer:

40 atm

Explanation:

Boyles law states that the pressure exerted on a gas is inversely proportional to the volume it occupies provided that the temperature is held constant. It is given by:

P ∝ 1/V

PV = constant

P₁V₁ = P₂V₂

Given that V₁ = initial volume = 200 ml, P₁ = initial pressure = 2 atm, V₂ = final  volume = 10 ml, P₂ = final pressure. Hence:

2 atm * 200 ml = P₂ * 10 ml

P₂ = (2 atm * 200 ml) / 10 ml

P₂ = 40 atm

Answer:

C8H16 (Ethylcyclohexane).

Explanation:

From the given information:

Compound A is an alkene because it interacts with 1 unit of hydrogen across a palladium catalyst.

Also, we are given another hint that:

Compound A needs 4 equivalence of H2 to hydrogenate under circumstances that decrease aromatic rings, indicating that it is a phenyl substituted alkene.

Compound A with formula C8H8 reacts instantly with KMnO4 to produce CO2, as well as carboxylic acid, points out that Compound acts as a terminal alkene.

Therefore, we can opine that compound A is a terminal phenyl substituted alkene whose formula = C8H8 (Styrene)

The diagrammatic expression of the compound can be seen below.

However, in the presence of the palladium catalyst, the reduction of Compound A with 4 units of hydrogen produces Compound B: C8H16 (Ethylcyclohexane).

Answer:

true

Explanation:

the small car also has gravity making it heavy

Answer:

ketone

Explanation:

Answer:

mixture

Explanation:

an example of one is a salad you can separate the ingredients

Answer: It's used in chemistry to measure the concentration of chemical solutions.

Explanation:

Beer's Law is used in chemistry to measure the concentration of chemical solutions, to analyze oxidation, and to measure polymer degradation.

The law also describes the attenuation of radiation through the Earth's atmosphere

Answer: 54 molecules of water will be formed in the reaction.

Explanation:

A balanced chemical equation is one where all the individual atoms are equal on both sides of the reaction. It follows the law of conservation of mass.

For the given unbalanced chemical equation, the balanced equation follows:

[tex]2C_8H_{18}+25O_2\rightarrow 16CO_2+18H_2O[/tex]

We are given:

Molecules of [tex]C_8H_{18}[/tex] = 6

Molecules of [tex]O_2[/tex] = 75

By the stoichiometry of the reaction:

If 2 molecules of [tex]C_8H_{18}[/tex] produces 18 molecules of water

So, 6 molecules of [tex]C_8H_{18}[/tex] will produce = [tex]\frac{18}{2}\times 6=54[/tex] molecules of water

Hence, 54 molecules of water will be formed in the reaction.

Answer:

See explanation

Explanation:

According to Bronsted-Lowry definition of acids/bases, an acid is a proton donor while a base is a proton acceptor.

Hence, in a reaction, the species that donate protons are strong acids while the species that accept protons are strong bases.

Hence, HSO4- is a stronger acid than H2C2O4 and SO42- is a weaker base than HC2O4-

Note that the conjugate base of a strong acid is a weak base and vice versa.

Answer:

Biologist

Explanation:

Not sure, but I think that is right

Answer:

CF4

Molecular geometry- tetrahedral

Electron geometry- tetrahedral

NF3

-molecular geometry - trigonal pyramidal

Electron geometry - tetrahedral

OF2

Molecular geometry - bent

Molecular geometry - tetrahedral

H2S

Molecular geometry- bent

Electron geometry - tetrahedral

Explanation:

According to Valence Shell Electron Pair Repulsion Theory, the shape of a molecule depends on the number of electron pairs on the valence shell of the central atom in the molecule.

For all the compounds listed, the central atom has four points of electron density. This correspond to a tetrahedra electron pair geometry. The presence of lone pairs on the central atom of OF2,NF3 and H2S accounts for the departure of the observed molecular geometry from the geometry and idealized bond angle predicted on the basis of the VSEPR theory.

Answer: The pH of the resulting solution will be 3.001

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex]          ......(1)

We are given:

Moles of NaOH = 0.0224 moles

Molarity of nitrous acid = 0.475 M

Molarity of sodium nitrite = 0.302 M

Volume of solution = 150 mL = 0.150 L          (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of nitrous acid}=(0.475mol/L\times 0.150L)=0.07125mol[/tex]

[tex]\text{Moles of sodium nitrite}=(0.302mol/L\times 0.150L)=0.0453mol[/tex]

The chemical equation for the reaction of nitrous acid and NaOH follows:

                   [tex]HNO_2+NaOH\rightleftharpoons NaNO_2+H_2O[/tex]

I:                0.07125     0.0224     0.0453

C:             -0.0224     -0.0224   +0.0224

E:              0.04885         -          0.0677

The power of the acid dissociation constant is the negative logarithm of the acid dissociation constant. The equation used is:

[tex]pK_a=-\log K_a[/tex]        ......(2)

We know:

[tex]K_a[/tex] for nitrous acid = [tex]7.2\times 10^{-4}[/tex]

Using equation 2:

[tex]pK_a=-\log (7.2\times 10^{-4})=3.143[/tex]

To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:

[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex]         .......(3)

Given values:

[tex][NaNO_2]=\frac{0.0677}{0.150}[/tex]

[tex][HNO_2]=\frac{0.04885}{0.150}[/tex]

[tex]pK_a=3.143[/tex]

Putting values in equation 3. we get:

[tex]pH=3.143-\log \frac{(0.0677/0.150)}{(0.04885/0.150)}\\\\pH=3.143-0.142\\\\pH=3.001[/tex]

Hence, the pH of the resulting solution will be 3.001

Answer:

true because the bonds cannot be broken down

Answer:

317 mL.

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 250 mL

Initial temperature (T₁) = 373.15 K

Final temperature (T₂) = 473.15 K

Pressure = Constant

Final volume (V₂) =?

The final volume of the air sample can be obtained by using the Charles' law equation as illustrated below:

V₁/T₁ = V₂/T₂

250 / 373.15 = V₂ / 473.15

Cross multiply

373.15 × V₂ = 250 × 473.15

373.15 × V₂ = 118287.5

Divide both side by 373.15

V₂ = 118287.5 / 373.15

V₂ = 317 mL

Therefore, the final volume of the air sample is 317 mL

Answer:

a) electrons

b) from Y to X

Explanation:

positive protons are the cores of atoms in relative to electrons very, very heavy.

the outer electrons of atoms can move, under certain conditions, away from the atom, leaving it electrically unbalanced -> positively charged

there can also be a surplus of electrons on many surfaces, leading to a static negative charge. you know this when you are charged and you discharge with an object or another person, electrically balancing the two bodies charge.

electrons are also much smaller. they are the "things" to move, let it be trough the air or trough a wire, while the heavy protons will stay in place (unless the materials is melted of course, extreme heat brakes the bounds between atoms relatively well)

Answer:

I choose D option because may be it's correct

I believe it is c

Explanation:

because if u think about it and also do some research you would see that the circulatory system is a strong part of your body which can help u through natural defences if this sounds weird it's all in research but if it ain't c dont blame me for ruining your life- lol but yeah I think its c

Answer:

When pressure increases, there is no effect on the reaction because volume is constant.

Answer:

Suppose that you add 29.2 g of an unknown molecular compound to 0.250 kg of benzene, which has a K f of 5.12 oC/m. With the added solute, you find that there is a freezing point depression of 2.78 oC compared to pure benzene. What is the molar mass (in g/mol) of the unknown compound

Explanation:

The mass of nonvolatile solute added is ---- 29.2g

The mass of solvent benzene is ---- 0.250kg = 250g

The Kf value of benzene is ---- 5.12^oC/m.

Depression in the freezing point of the solution is --- 2.78^oC.

What is the molar mass of the unknown solute?

[tex]The depression in freezing point = Kf * molality of the solution\\molality of the solution = \frac{mass of solute}{molar mass of solute}*\frac{1}{mass of solvent in kg}[/tex]

Substitute the given values in this formula to get the molar mass of unknown solvent:

[tex]molality=\frac{29.2g}{M} * \frac{1}{0.250kg} \\depression in freezing point:\\2.78^oC=5.12^oC/m * \frac{29.2g}{M} * \frac{1}{0.250kg} \\\\=>M=5.12^oC/m * \frac{29.2g}{2.78^oC} * \frac{1}{0.250g} \\\\\\=>M=215.1g/mol[/tex]

Hence, the molar mass of unknown solute is --- 215g/mol.

Answer: The correct option is enough solvent to make 1.00 L of solution

Explanation:

A solution consists of solute and solvent. A solute is defined as the component present in a smaller proportion while the solvent is defined as the component that is present in a larger proportion.

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]Molarity=\frac{Moles}{Volume}[/tex] .......(1)

We are given:

Molarity of solution = 0.500 M

Moles of solute = 0.500 moles

Putting values in equation 1, we get:

[tex]0.500mol/L=\frac{0.500mol}{\text{Volume of solution}}\\\\\text{Volume of solution}=\frac{0.500mol}{0.500mol/L}=1.00L[/tex]

Hence, the correct option is enough solvent to make 1.00 L of solution

Answer:

0.27 atm

Explanation:

At 25ºC, Kp = 2.9 x 10⁻³ for the reaction NH₄OCONH₂(s) ⇌ 2 NH₃(g) + CO₂(g). In an experiment carried out at 25ºC, a certain amount of NH₄OCONH₂ is placed in an evacuated rigid container and allowed to come to equilibrium. Calculate the total pressure in the container at equilibrium.

Step 1: Make an ICE chart

Solid and liquids are ignored in ICE charts.

       NH₄OCONH₂(s) ⇌ 2 NH₃(g) + CO₂(g)

I                                            0             0

C                                        +2x           +x

E                                          2x             x

Step 2: Write the pressure equilibrium constant expression (Kp)

Kp = [NH₃]² × [CO₂]

Kp = (2x)² × x

2.9 × 10⁻³ = 4 x³

x = 0.090 atm

Step 3: Calculate the pressures at equilbrium

pNH₃ = 2x = 2(0.090 atm) = 0.18 atm

pCO₂ = x = 0.090 atm

The total pressure is:

P = 0.18 atm + 0.090 atm = 0.27 atm

Answer: The equation is [tex]_{29}^{63}\textrm{Cu}\rightarrow _{30}^{63}\textrm{Zn}+_{-1}^0e[/tex]

Explanation:

Neutron capture is a process where a neutron is converted into a proton and an electron. The released particle is known as beta particle and it carries a charge of -1 units and has a mass of 0 units. It is also known as an electron. The general equation for this process is:

[tex]_Z^A\textrm{X}\rightarrow _{Z+1}^A\textrm{Y}+ _{-1}^0\e[/tex]

The nuclear equation for the formation of zinc via neutron capture of copper follows:

[tex]_{29}^{63}\textrm{Cu}\rightarrow _{30}^{63}\textrm{Zn}+_{-1}^0e[/tex]

Answer:

B(OH)₃ + H₂O = B(OH)₄⁻ + H⁺

Explanation:

Let's consider Arrhenius acid-base theory:

Boric acid, B(OH)₃ reacts with water according to the following equation.

B(OH)₃ + H₂O = B(OH)₄⁻ + H⁺

As we can see, boric acid releases H⁺ in aqueous media. Thus, it is an acid.

Answer:

it will be no.A genotype

Explanation:

the answer is in the Image above

The radius of the potassium atom is [tex]2.27\times 10^{-4} \mu m[/tex].

Explanation:

Given:

The radius of potassium atom =[tex]2.27\times 10^{-7} mm[/tex]

To find:

The radius of potassium atom in micrometers.

Solution:

The radius of potassium atom =[tex]2.27\times 10^{-7} mm[/tex]

In 1 millimeter there are 1000 micrometers.

[tex]1 mm = 1000 \mu m[/tex]

Then in [tex]2.27\times 10^{-7} mm[/tex]:

[tex]=2.27\times 10^{-7} \times 1000\\=2.27\times 10^{-4} \mu m[/tex]

The radius of the potassium atom is [tex]2.27\times 10^{-4} \mu m[/tex].

Learn more about conversions here:

brainly.com/question/24530464

brainly.com/question/17743460

Answer:

1.806 × 10²⁴ atoms

Explanation:

To obtain the number of atoms a substance contain, we have to multiply the number of moles in that substance (n) by Avogadro's number, which is 6.02 × 10²³.

According to this question, a sample of carbon tetrachloride (CCl4) contains 3 moles of the substance. The number of atoms in CCl4 is calculated thus:

number of atoms = 3 × 6.02 × 10²³

number of atoms = 18.06 × 10²³

number of atoms = 1.806 × 10²⁴ atoms.