Answer:
card
Explanation:
A standard cost card can be regarded as card that encompass all the itemization or list of overhead, labor and standard amounts of materials, which is required in creating one unit of a product. This card can multiplies quantities that is been required to get to the total standard cost of a product and standard cost of each of the items.
It should be noted that standard cost
card indicates the amount of direct labor, direct materials and overhead for one unit of product.
People with expertise tend to have more influence using ___, whereas those with a strong legitimate power base are usually more successful applying ___.
A. upward appeal; persuasion
B. silent authority; coalition formation
C. persuasion; silent authority
D. silent authority; assertiveness
E. information control; persuasion
Answer:
C. persuasion; silent authority
Explanation:
Influence tactics can be regarded as steps that can be taken by people in order to exert influence on others in a particular organization, thereby bringing about achieving their goals. If successfully applied, influence tactics can help junior managers or lower level that lack substantial sources of power to be able to exert impact on both behavior and decisions of others within that organization.
Silent Authority can be regarded as silent application of authority, which can be elaborated as when someone complies with a particular request as a result of the requester’s legitimate hierarchical power and role expectations of the target person. This condition is often been referred to as deference to authority. As regards to deference, it takes place, where one comply with ones boss in completion of particular task, let say this task falls within one's job scope and ones boss has the right in making this request, then we can say the influence strategy works without persuasion or negotiation.
As an expert ,one would have broad as well as deep competence in terms of knowledge, experience and skill, with help of practice and education in a specific field. Individuals that has expertise usually have influence with the use of persuasion.
Power provide a person or unit with
opportunity to exert influence as regards organizational outcomes. Influence can be regarded as power in action. It should be noted that People with expertise tend to have more influence using persuasion, whereas those with a strong legitimate power base are usually more successful applying silent authority.
You want to buy a car and a local bank will lend you $18,500. The loan will be fully amortized over 5 years, and the nominal interest rate would be 4.65%, with interest paid monthly. What is the monthly loan payment
Answer:
$346.16
Explanation:
The monthly loan payment can be calculated using a Financial calculator as follows :
PV = $18,500
N = 5 x 12 = 60
I/YR = 4.65%
P/YR = 12
FV = $0
PMT = ??
The monthly loan payment (PMT) is calculated as $346.16
Profit margin is synonymous with the term _______ and tells whether or not total profit will be positive.
Answer: Average profit
Explanation:
Both average profit and profit margin show the percentage of profit that a company can expect to receive from $1 worth of sales. It is calculated by dividing the profits by the sales figure,
If sales are $10 and profits are $3, the profit margin would be:
= 3/10
= 30%
This means that for every $1 of sales, there is $0.30 in profit. This method shows us whether the total profit will be negative or positive by showing us individual product profit.
LUVFINANCE, Inc. is estimating its WACC. The firm could sell, at par, $100 preferred stock that pays a 10 percent annual dividend and incurs 6.19% flotation costs. What is the cost of new preferred stock financing
Answer:
$10.66
Explanation:
Calculation to determine the cost of new preferred stock financing
Cost of new preferred stock financing=(100*10%)/(100*(1-0.0619))
Cost of new preferred stock financing=10/(100*(1-0.0619))
Cost of new preferred stock financing=10/(100*0.9381)
Cost of new preferred stock financing=10/93.81
Cost of new preferred stock financing=$10.66
Therefore the cost of new preferred stock financing is $10.66
On November 1, 20Y9, Lexi Martin established an interior decorating business, Heritage Designs. During the month, Lexi completed the following transactions related to the business:
Nov. Lexi transferred cash from a personal bank account to an account to be used for the business in exchange for common stock, $27,100.
1Paid rent for period of November 1 to end of month, $3,300.
6Purchased office equipment on account, $12,840.
8Purchased a truck for $30,500 paying $7,000 cash and giving a note payable for the remainder.
10Purchased supplies for cash, $1,740.
12Received cash for job completed, $7,500.
15Paid annual premiums on property and casualty insurance, $2,300.
23Recorded jobs completed on account and sent invoices to customers, $12,410.
24Received an invoice for truck expenses, to be paid in November, $1,400.
Enter the following transactions on Page 2 of the two-column journal:Nov. 29 Paid utilities expense, $4,500. 29 Paid miscellaneous expenses, $1,000. 30 Received cash from customers on account, $9,000. 30 Paid wages of employees, $6,800. 30 Paid creditor a portion of the amount owed for equipment purchased on November 6, $3,000. 30 Paid dividends, $2,500. how it do Journal
Answer:
looks good no mistakes and uh b if this is a question
A recent study determined that, at the current market price, there is a shortage of widgets in Pleasantville. If the market for widgets is allowed to adjust, the ultimate result will be:
Answer: b. an increase in price and an increase in the quantity supplied
Explanation:
According to the law of supply and demand, when the supply of a good is low, the price should be high to reflect this scarcity. In this case, the supply of widgets is low, hence the shortage.
If the market was able to freely adjust, the price of widgets would increase to reflect this shortage. When supplies see this increase, they will increase their supply so as to earn more profits.
Schultz v. Capital International Security, Inc. 460 F.3d 595 (4th Cir. 2006) Facts: The plaintiff-agents provided security services for Schultz and his family at his Virginia residence in twelve-hour shifts. The agents were paid a daily rate for each shift; they received no extra pay for overtime. The agents had a command post at the residence, from which they observed security camera monitors, answered the telephone, and kept a daily log of all arrivals and departures. They also made hourly walks of the property, ensured that members of his family were safe when departing and arriving, sorted mail, and performed various tasks upon request of his family. In addition to their security duties, the agents were responsible for having the household’s vehicles washed and fueled, making wake-up calls, moving furniture, and doing research on the Internet. Schultz's long-time driver and travel agent, Sammy Hebri, formed a company called Capital International Security, Inc. (CIS). Hebri started CIS for the purpose of becoming Schultz's security contractor. Hebri sent a memo (dated July 24, 2002) to the agents directing them to obtain their own private security business licenses from the VDCJS and individual liability insurance so they could be classified as independent contractors. Issue: The issue is whether the bodyguards were considered to be employees or independent contractors for the purpose of the Fair Labor Standards Act. Action: You must respond to all questions below. You must use at least three sources from the class materials and do independent research. Do not combine the five discussion questions and please use the outline below for your paper. Use of the outline will help you organize your research and comments and ensure you do not miss any questions that must be addressed. Your responses to each question must be in narrative format not bullets. Use the headings below to organize your paper.
Question 1A - a. Summarize the relevant facts of the case. What is your opinion on the outcome of this case?
Question 1c - Classification Test: In the above case, what kind of classification test could have been used and what would be the result?
Answer:
Hence the answer is given as follows,
Explanation:
1A) In the given case, the agents who are the plaintiffs were working as security guards for Schultz and his family. There was miscellaneous work that they were required to conduct for the family. The agents were paid a daily wage and weren't paid overtime. Schultz’s driver opened a replacement company called CIS and asked the agents to get their own private security business licenses in order that they will get classified as independent contractors. So, the difficulty arises that whether the agents should be classified as employees or as independent contractors.
The agents were paid a daily wage and not a salary. Moreover, they weren't qualified for overtime pay. Employees usually get salaries and are eligible to urge over time by the overtime work. Hence the agents are independent contractors and can't be considered employees.
1C) In the given case, a hybrid classification test is often wont to check the status of whether the agents were employees or independent contractors. A hybrid classification test has characteristics of right to regulate test also as economic realities test. Schultz and his family weren't controlling the work of the agents. The agents had pre-determined work and that was conducting it in an independent manner. The agents also were paid on a day to day and didn't have a timekeeping requirement. Hence the agents can qualify as independent contractors and not employees as per the hybrid classification test.
Shellhammer Company's inventory records show the following data for the month of September: Units Unit Cost Inventory, September 1 100 $3.34 Purchases: September 8 450 3.50 September 18 350 3.70 A physical inventory on September 30 shows 200 units on hand. If the company uses FIFO inventory costing and a periodic inventory system, the the value of ending inventory at the end of September is
Answer:
Ending inventory $740
Cost of goods sold $2,464
Explanation:
Calculation to determine the value of ending inventory and cost of goods sold if the company uses FIFO inventory costing and a periodicinventory system.
Calculation for the value of ending inventory
Ending inventory of 200 units= 200 x $3.70
Ending inventory of 200 units = $740
Calculation for Cost of goods sold:
Units available for sale= (100 + 450 + 350) = 900
Units sold= 900 – 200 = 700
100 × $3.34 = $ 334
450 × $3.50 =$1,575
150 × $3.70 =$555
Cost of goods sold $2,464
($ 334+$1,575+$555)
Therefore the value of ending inventory is $740 and cost of goods sold if the company uses FIFO inventory costing and a periodicinventory system will be $2,464
11. (-/1 Points] DETAILS BRECMBC9 5.11.010.
MY NOTES
Set up and solve an equation for the following business situation.
Pitt's Pit Stop sold $16,003.50 worth of gasoline yesterday. Regular sold for $3.30 a gallon and premium sold for $3.45 a gallon. If the station sold 370 more gallons of regular than premium, answer the
following questions.
(a) How many gallons of each type of gasoline were sold?
regular
gal
premium
gal
(b) If the profit on regular gas is $0.15 per gallon and on premium is $0.18 per gallon, what was the station's total profit (in dollars)?
$
Answer:
2190 ; 2560 ;
$778.2
Explanation:
Total worth of gasoline sold = 16003.50
Cost of regular = 3.30
Cost of premium = 3.45
Let :
premium Gallon sold = x
Regular gallon sold = 370 + x
Hence, mathematically;
(3.45*x) + (3.30 * (x + 370)) = 16003.50
3.45x + 3.30x + 1221 = 16003.50
6.75x = 16003.50 - 1221
6.75x = 14782.5
x = 14782.5 / 6.75
x = 2190
Premium Gallon sold = 2190 gallons
Regular gallon sold = 2190 + 370 = 2560 gallons
Profit per regular gallon sold = $0.15
Progit per premium Gallon sold = $0.18
Total profit = (2190 * 0.18) + (2560 * 0.15) = $778.2
If unit sales prices are $7 and variable costs are $5 per unit, how many units would have to be sold to break-even if fixed costs equal $8,000?
Answer: 4,000 units
Explanation:
The breakeven point of sales can be calculated by the formula:
= Fixed costs / Contribution margin
Contribution margin = Sales price - Variable cost
= 7 - 5
= $2
Breakeven point in sales:
= 8,000 / 2
= 4,000 units
b) Take a real time example of a company which has formed a strategic alliance then talk about strategic relationships. What is their rate of success? Why do businesses develop strategic partnerships?
Answer:
c
Explanation:
The following data relate to a company that produces and sells a travel guide that is updated monthly: Each book sells for $20.00. The company sold 8,000 books in June and 10,000 books in July. The unit contribution margin per book is:
Answer:
10.30
Explanation:
20
8000
160 000 June
10000
200 000 July
20 - 3.20 -4 - .50 -2 = 10.30
costs:Printing and binding...............................$3.20 per copyBookstore discounts................................$4.00 per copySalespersons’ commissions....................$0.50 per copyAuthor’s royalties...................................$2.00
Bonita Industries purchased machinery for $1030000 on January 1, 2017. Straight-line depreciation has been recorded based on a $82000 salvage value and a 5-year useful life. The machinery was sold on May 1, 2021 at a gain of $27500. How much cash did Bonita receive from the sale of the machinery?
a. $138,000
b. $162,000
c. $198,000
d. $258,000
Answer:
$235,900
Explanation:
Depreciation p.a. = ($1030000 - $82,000) / 5 years
Depreciation p.a. = $189,600
Depreciation charged till the Jan 1 ,2021 (4 years)
= $189,600 * 4 years
= $758,400
Depreciation charged till May 1, 2021 (4 month)
= $189,600 * 4 months/12 months
= $63,200
Value of the asset = $1030000 - $758,400 - $63,200
Value of the asset = $208,400
Cash received from sale of machinery = $208,400 + $27,500 (gain)
Cash received from sale of machinery = $235,900
Harding Company is in the process of purchasing several large pieces of equipment from Danning Machine Corporation. Several financing alternatives have been offered by Danning: (FV of $1, PV of $1, FVA of $1, PVA of $1, FVAD of $1 and PVAD of $1) (Use appropriate factor(s) from the tables provided.) 1. Pay $1,160,000 in cash immediately. 2. Pay $461,000 immediately and the remainder in 10 annual installments of $94,000, with the first installment due in one year. 3. Make 10 annual installments of $156,000 with the first payment due immediately. 4. Make one lump-sum payment of $1,730,000 five years from date of purchase. Required: Determine the best alternative for Harding, assuming that Harding can borrow funds at a 8% interest rate. (Round your final answers to nearest whole dollar amount.)
Answer:
Option-2 is best alternative
Explanation:
Option-1
Present value of lumpsum amount -1160000
Option-2
Annual paymentt for 10 yrs -94000
Annuity for 10 yrs at 8% 6.7101
Present value of outflowws -630749
Add: Initial amount paid -461000
Present value of outflowws -1091749
Option-3
Annual paymentt for 9 yrs -156000
Annuity for 10 yrs at 8% 6.24689
Present value of outflowws -974515
Add: Initial amount paid -156000
Present value of outflowws -1130515
Option-4
Amount paid after 5 yrs -1730000
PVF at 5 yrs at 8% 0.680583
Present value -1177409
Option-2 is best alternative
According to the results, if a CEO in the Financial industry and a CEO in the Health Care industry both have 88 years of experience, what is the estimated difference in annual salary between the two CEOs
Answer: $19,032.79
Explanation:
There is some data missing that I was unable to find so I will answer a similar question and can use your data to answer this using mine as a reference.
Because the healthcare industry is the base industry, the estimated difference in the annual salary is:
= 0 - Coefficient of Financial industry
= 0 - (-19,032.787112)
= 0 + 19,032.787112
= $19,032.79
If a firm has sales of $100, total expenses (including interest and taxes) of $50, has a stock that is selling at $50 per share and has 10 shares of stock outstanding, then the firm has a P/E ratio of:
Answer: 10
Explanation:
P/E Ratio = Price per share/Earnings per share
Earnings per share:
= (Sales - expenses) / number of shares outstanding
= (100 - 50) / 10
= $5.00
P/E Ratio is therefore:
= 50 / 5
= 10
Acme Company is considering investing in a new machine that costs $126,594 and that has a useful life of 12 years with no salvage value. The machine will generate $19,500 annually in net cash inflows. The internal rate of return on the investment is: (Round your intermediate calculations to 3-decimals and your internal rate of return calculations to the nearest whole percent.)
Answer: 11%
Explanation:
The internal rate of return is the rate that will equate the cash inflows with the cost of investment.
It is therefore the discount rate used to find the present value of an annuity because the inflows are stable and are therefore annuities.
Present value of annuity = Annuity * Present value factor of annuity, 12 years, %?
126,594 = 19,500 * Present value of annuity factor
Present value of annuity factor = 126,594 / 19,500
= 6.492
Go to a present value of annuity factor table and find the interest rate that intersects with 12 years to give a factor of 6.492:
Rate is 11%
The central bank of Canada is the Bank of Canada.
Suppose that inâ Canada, banks' reserves at the Bank of Canada were $1 âbillion, Bank of Canada notes were $60 billion, and the quantity of coins was $4 billion. What was the monetary base?
Answer:
$65 billion
Explanation:
Monetary base means the total sum of banks’ reserves at the Fed (Bank of Canada), Federal reserve notes (Bank of Canada notes), and quantity of coins.
Monetary base = $1 billion + $60 billion + $4 billion
Monetary base = $65 billion
All standard costing methods use the predetermined overhead rate to apply factory overhead. This is based on an estimated amount that is calculated during the budgeting process at the beginning of the year. Therefore, there will almost always be a variance between the factory overhead that is applied and the actual factory overhead that is accumulated. These variances should be a minimal amount, but may sometimes be material. Therefore, it is important that an accountant find the cause of the variance, so as not to repeat it. Determining the reasons for variances is an important part of the overall process of variance analysis. Certain causes are commonly attributed to specific variances. Match each reason on the left with the variance(s) it commonly creates. Each numbered item has one or more correct answer(s). Each lettered item may be used once, more than once, or not at all.
1. A change in the quality of materials purchased
2. A new supplier contract
3. Error in the accounting records
4. Change in proportion of spoiled materials
5. Unreasonable standard
6. Unanticipated overtime hours
7. A change in the government-mandated minimum wage
8. Equipment malfunction
9. A change in average worker experience or training
A. Direct materials price variance
B. Direct materials quantity variance
C. Direct labor rate variance
D. Direct labor efficiency
Answer:
1. A change in the quality of materials purchased
Variance: Direct materials quantity variance
2. A new supplier contract
Variance: Direct materials price variance
3. Error in the accounting records
Variance: Direct materials price variance
4. Change in proportion of spoiled materials
Variance: Direct materials quantity variance
5. Unreasonable standard
Variance: Direct labor efficiency
6. Unanticipated overtime hours
Variance: Direct labor rate variance
7. A change in the government-mandated minimum wage
Variance: Direct labor rate variance
8. Equipment malfunction
Variance: Direct labor efficiency
9. A change in average worker experience or training
Variance: Direct labor efficiency
The following data relates to Black-Out Company's estimated amounts for next year. Estimated: Department 1 Department 2 Manufacturing overhead costs $ 300,000 $ 400,000 Direct labor hours 60,000 DLH 80,000 DLH Machine hours 1,000 MH 2,000 MH What is the company's plantwide overhead rate if machine hours are the allocation base
Answer:
Predetermined manufacturing overhead rate= $233.33 per machine hour
Explanation:
Giving the following information:
Total estimated overhead= 300,000 + 400,000= $700,000
Machine hours= 1,000 + 2,000= 3,000
To calculate the predetermined manufacturing overhead rate we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 700,000 / 3,000
Predetermined manufacturing overhead rate= $233.33 per machine hour
MLX has annual sales of $320 million per year and has calculated the collection float to be 12 days. If MLX is currently paying 9.35% on its line of credit, what amount of interest expense could be saved if the collection float is reduced by 3 days? (Assume 365 days per year.
Answer: $245918
Explanation:
Following the information given in the question, the amount of interest expense that could be saved if the collection float is reduced by 3 days will be calculated thus:
= Sales × Interest × Sales reduction/365
= $320 million × 9.35% × 3/365
= $245918
Therefore, the interest expense that can be saved is $245918.
Identify the simplifying assumptions usually made in net present value analysis.
a. AlI cash flows Other than the initial investment occur at the end of periods.
b. All cash flows generated by the investment project are immediately reinvested at a rate of return greater than the discount rate.
c. All cash flows generated by the investment project are immediately reinvested at a rate Of return equal to the discount rate,
d. All cash flows occur at the beginning of the periods,
e. The time value of money is ignored when evaluating investment proposals under the net present value analysis.
Answer:
a
c
Explanation:
net present value analysis is a capital budgeting method
It is used to analyse the profitability of an investment
Pearson Electric Company uses the high-low method to analyze mixed costs. The following information relates to the production data for the first six months of the year.
Month Cost(Y) Hours(H)
January $8,050 335
February $9,750 780
March $8,040 460
April $8,110 380
May $10,210 1,055
June $9,510 755
What is the estimated total cost at an operating level of 1,180 hours, using the high-low method? (Round variable cost per unit to 2 decimal places.)
Answer:
Results are below.
Explanation:
First, we need to calculate the variable and fixed costs:
Variable cost per unit= (Highest activity cost - Lowest activity cost)/ (Highest activity units - Lowest activity units)
Variable cost per unit= (10,210 - 8,050) / (1,055 - 335)
Variable cost per unit= $3
Fixed costs= Highest activity cost - (Variable cost per unit * HAU)
Fixed costs= 10,210 - (3*1,055)
Fixed costs= $7,045
Fixed costs= LAC - (Variable cost per unit* LAU)
Fixed costs= 8,050 - (3*335)
Fixed costs= $7,045
Now, the total cost for 1,180 hours:
Total cost= 7,045 + 3*1,180
Total cost= $10,585
The number of all credit-card holders in the U.S. is IN(a) million card holders and the collective amount of credit card debt that all credit-card holders carry is D(x) billion dollars, x years after 2010. The average credit card debt per card holder at year x is:
Answer: D(x) / IN(a)
Explanation:
If one wanted to find out the average credit card debt per card holder then the correct formula would be:
= Amount of debt that all credit card holders carry / Number of credit card holders
As the amount of debt that all credit card holders carry is denoted by D(x) and the number of credit card holders is IN(a), the average credit card debt per card holder is:
= D(x) / IN(a)
A collateralized debt obligation (CDO) bundles house payments and creates safe, okay, and risky investment vehildes. Group of answer choices True False
Answer:
The answer is "True".
Explanation:
The CDO is a complicated support materials instrument that is funded and sold to investors with a pool of credit as well as other assets. A CDO is a special type of derivative since its value was generated from another subordinated asset, as this is mentioned in the title. This guaranteed outstanding debt combines repayments from the home and produces safe, all legal, and hazardous financial instruments.
1. Ranghu started business with cash $80,000, goods $40,000 and furniture $20,000.
2. Sold goods to Anna of the list price $2000 at trade discount of 10%.
3. Paid rent $800, Trade expenses $400and Travelling expenses $500.
4. Deposited to AC bank for opening a current account $25,000.
5. Bought goods from Kamal for $20,000 at a trade discount of 10% and Cash discount of 2%. Paid 60% amount immediately.
Answer:
1.Raghu start the business with three things i. e cash, goods, furniture etc. Something that come in the business is debited. All these things are done by the properitor. Hence all these things are goes to Capital account. JOURNAL ENTRY WILL BE!!!! Cash a / c . Dr. 80,000 Purchase a / c . Dr. 40,000 Furniture a / c . Dr 20,000 ..To Capital a/c........... 1,40,000 (being started business with cash, goods and furniture.)
2.The answer will be Rs.1800 Explanation: 2000^ * 10\%=200 2000-200=18003.Answer will be $7004.250005.5000 please mark as brainliestRediger Inc. a manufacturing company, has provided the following data for the month of June. The balance in the Work in Process inventory account was $22,000 at the beginning of the month and $17,000 at the end of the month. During the month, the company incurred direct materials cost of $55,000 and direct labor cost of $28,000. The actual manufacturing overhead cost incurred was $53,000. The manufacturing overhead cost applied to jobs was $51,000. The cost of goods manufactured for June was: _________.
a. $141,000
b. $139,000
c. $134,000
d. $136,000
Answer:
b. $139,000
Explanation:
The cost of goods manufactured is the total costs incurred in the month of June in producing goods which comprise direct costs of labor, direct materials,factory overhead and so on shown in the attached excel file.
Rediger Inc.
Cost of goods manufactured schedule
Direct materials purchased $55,000
Direct labor $28,000
Total direct costs $83,000
factory overhead $51,000
Total manufacturing costs $134,000
Work in process 1/1 $22,000
Work in process 12/31 ($17,000)
Cost of goods manufactured $139,000
Kevin's Company uses a normal costing system, applying overhead using a single plant-wide rate. At the beginning of the year, budgeted (estimated) manufacturing overhead costs totaled $400,000, budgeted direct labor hours totaled 80,000 hours and budgeted machine hours totaled 20,000 hours. At the end of the year, the actual overhead costs recorded totaled $450,000 and actual direct labor hours were 86,000. Kevin's Company's production process is very labor-intensive and therefore uses direct labor hours as the activity base. With this information, what is the assigned (applied) amount of MOH that Sherfield Company assign to production
Answer:
$430,000
Explanation:
MOH recovery rate = Estimated MOH / Estimated direct labor hours
MOH recovery rate = $400,000 / 80,000 hours
MOH recovery rate = $5 per direct labor hours
So, the applied amount of manufacturing overhead rate is $5
Assigned amount of MOH = MOH recovery rate * Actual direct labor hours
Assigned amount of MOH = $5 * 86,000 DLH
Assigned amount of MOH = $430,000
The ________ is the difference between merchandise imports and exports and a measure of a country's international trade in goods.
Answer:
balance of trade
Explanation:
Trade can be defined as a process which typically involves the buying and selling of goods and services between a producer and the customers (consumers) at a specific period of time.
Basically, trade can be categorized into two (2) main groups and these are;
I. Import: this involves bringing in goods from a foreign country to sell in a different (domestic) country.
II. Export: it involves the sales of goods produced in a domestic country to a foreign country.
In Economics, a balance of trade is a measure of the difference between merchandise imports and exports, as well as a country's international trade in goods. Thus, it's a measure of the difference between the monetary value of the import and export of goods of a country over a specific period of time.
Mô hình cổ điển cho rằng đất đai là yếu tố quan trọng của tăng trưởng, đồng thời là yếu tố giới hạn của tăng trưởng
