Answer:
l
Explanation:
Based on the action-reaction forces, the skateboard will most likely move towards west when she jumps off.
What is a force?Force is defined as a cause which is capable of changing the motion of an object. It can cause an object which has mass to change it's velocity. It is also simply a push or a pull . It has both magnitude as well as direction.Hence, it is a vector quantity.
It has SI units of Newton and is represented by'F'.Newton's second law states that force which acts on an object is equal to momentum which changes with time. If mass of object is constant, acceleration is directly proportional to net force acting on an object.
The concepts which related to force are thrust and torque .Thrust increases the velocity of an object and torque produces change in rotational speed of an object.
Learn more about force,here:
https://brainly.com/question/28875770
#SPJ6
What is the molarity of a 5mol solution in 3L?
Answer:
1.67 M.
Explanation:
M = mol/L ⇒ M = 5mol / 3L = 1.67 M
Need help please? Thanks youu
Answer:
A
B
E
Explanation:
"Fission is the splitting of a heavy, unstable nucleus into two lighter nuclei
and fusion is the process where two light nuclei combine together releasing vast amounts of energy"
a process that releases energy is respiration
which two changes of state can be caused by removing thermal energy from a substace A. deposition B. condencation C. vaporization D.sublimation
Answer:
maybe is b but wait to other people answer
Answer:A. deposition B. condencation
Explanation:
When chemists work with solid materials, we simply weigh out amounts of solid reagents and calculate mole amounts when thinking about stoichiometry. However, when we dissolve a solid (also known as a solute) in a solvent to form a solution, the solute becomes evenly distributed throughout the solution and we need to know how many moles of solute are present in a particular volume of solution.a) A solution is created by dissolving 13.5 grams of ammonium chloride in enough water to make 315 mL of solution. How many moles of ammonium chloride are present in the resulting solution?b) What is the molarity of the solution described above?c) To carry out a particular reaction, you determine that you need 0.0500 moles of ammonium chloride. What volume (mL) of the solution described above will you need to complete the reaction without any leftover NH4Cl?
Answer:
See the answers below
Explanation:
13.5 g of NH4Cl was dissolved in 315 mL of water.
Moles of NH4Cl present in the solution = mass/molar mass
Molar mass of NH4Cl = 54.49 g/mol
a) Moles of NH4Cl = 13.5/54.49
= 0.25 mole
b) Molarity of solution = moles of solute/volume of solution
moles of NH4Cl = 0.25
volume of solution = 315 mL = 0.315 L
molarity = 0.25/0.315
= 0.79 M
c) moles required = 0.0500 mole
molarity = 0.79 M
molarity = moles x volume
volume = molarity/moles
= 0.79/0.0500
= 15.8 L = 15,800 mL
What change would you expect on the rate of the SN2 reaction of 1-iodo-2-methylbutane with cyanide ion if the nucleophile concentration is halved and the alkyl halide concentration is doubled?
a. divided by 4
b. halved
c. no effect
d. increased 2x
e. increased 3x
f. increased 6x
g. increased 9x
Answer:
no effect
Explanation:
In an SN2 reaction, the mechanism is bi-molecular and first order in both the alkyl halide and the nucleophile.
Hence the rate of reaction is;
Rate = k [1-iodo-2-methylbutane] [cyanide ion]
Given that it is a bimolecular reaction, if we double the concentration of 1-iodo-2-methylbutane and the concentration of the cyanide ion is halved, the rate of reaction remains the same.
The half-life of the radioisotope 158Eu is 0.77 h. How much time is required for a 160.0-g sample of 158Eu to decay to 2.07 g?
a. 3.0 h
b. 4.0 h
c. 6.0 h
d. 2.1 h
e. 4.8 h
Answer: e. 4.8 h
Explanation:
Expression for rate law for first order kinetics is given by:
[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]
where,
k = rate constant
t = age of sample
a = let initial amount of the reactant
a - x = amount left after decay process
a) for rate constant
Half life is the amount of time taken by a radioactive material to decay to half of its original value.
[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]
[tex]k=\frac{0.693}{0.77hr}=0.9hr^{-1}[/tex]
b) for 160.0 g to decay to 2.07 g
[tex]t=\frac{2.303}{0.9}\log\frac{160.0}{2.07}[/tex]
[tex]t=4.8hr[/tex]
The time required for a 160.0-g sample of 158Eu to decay to 2.07 g is 4.8 hours
Which of the following statements are FALSE of models? (select all that applies)
A.) A scientific model must show one or more mechanisms that can explain what causes certain observations.
B.) It is possible to represent all of the components and relationships of a phenomenon.
C.) Models are revised many times as new information is gained.
D.) Models are completely accurate because choices have to be made to simplify the model.
E.) When creating a model, t is important to include the components that play a significant role in explaining the phenomenon or answering the question.
F.) Models must explain or make predictions about observations.
Answer:
A B and C
Explanation:
Hopefully this helps
If you stretch a rubber band between your fingers and pluck it, the rubber band makes a sound from the vibration. True Or False
Answer:
True
Explanation:
How are breathing and cellular respiration related? (15 points if answered)
Cellular respiration is not the same thing as breathing, but they are closely related. When you breathe in, you take in the When you breathe in, you take in the oxygen your cells need for cellular respiration. When you breathe out, you get rid of the carbon dioxide that your cells produce during cellular respiration
(hope this helps ^^)
Answer:
When you breathe in, you take in the oxygen your cells need for cellular respiration. When you breathe out, you get rid of the carbon dioxide that your cells produce during cellular respiration.
Explanation:
3. Calculate the mass of the candle burned during this experiment.
4. Calculate the molar mass of candle wax (C24H) using the formula from question 1.
5. Calculate the moles of candle wax burned
Answer:
Calculate the number of moles of the candle that were burned by dividing the change in mass by the candle's molar mass. Candle wax is defined by the chemical formula C25H52 and has a molar mass of 353 grams per mole. Given a change in mass of 2 grams, divide 2 by 353 to obtain . 0056 moles.
Question 3 of 25
What is another name for Group 14?
Answer:
4A
Explanation:
on the periodic table
Please help!! On a timer!! If you can help me with any of the following questions please, I'm lost.
1. What is the density of a block of marble that occupies 251 cm^3 and has a mass of 933 g? Answer in units of g/cm^3
2. Lee pushes horizontally with a force of 45 N on an 18 kg mass for 12 across the floor. Calculate the amount of Lee did. Answer in units of J.
3. What is the mass number of an element with atomic number 10 and 10 neutrons.
Answer:
3. Answer= Neon (Ne) is the Group 8A chemical element that has atomic number 10 and mass 20.1797.
The table shows the total number of electrons in Atom A and Atom B.
Atom Number of Electrons
A 11
B 17
Which statement is correct?
A. A will give up electrons to form bonds.
B. B will give up electrons to form bonds.
C. Both A and B will be chemically unreactive.
D. Both A and B will gain electrons to become stable
Answer:
C. Both A and B will be chemically unreactive.
Explanation:
Just took the test.
Using the K, L, M, N electronic configuration, both Atoms A and B do not have a full valence electron, hence, Both A and B will be chemically unreactive.
Atom A :
Number of electrons = 11
K - shell = 2
L - shell = 8
M - shell = 1 (valence shell is not complete)
Atom B :
Number of electrons = 17
K - shell = 2
L - shell = 8
M - shell = 7 (valence shell is not complete)
Atom A will give up electron to attain stability Atom B will gain electron to attain stabilityTherefore, Atoms A and B are chemically unreactive as they do not have a full valence electron.
Learn more :https://brainly.com/question/20287391
What is the frequency of visible light which has a wavelength of 625nm?
Answer:
The answer is 4.80 x 1014s-1b
Explanation:
625 nm x 10-9m= 6.25 x 10-7 m = c = 2.998 x 108m/s1 nm 6.25 x 10-7m=4.80 x 1014s-1b.)
The frequency of visible light is equal to 4.8 ×10¹⁴s⁻¹.
What are frequency and wavelength?Frequency can be described as the number of oscillations of a wave in a time of one second. The frequency of the wave or light has S.I. units which are per second (s⁻¹) or hertz.
Wavelength can be defined as the distance between the two adjacent points of a wave in the phase with each other. Two adjacent crests or adjacents troughs on a wave are separated by a distance is called wavelength.
The relationship between the speed of light, frequency, and wavelength is:
c = νλ
Given, the wavelength of the light, λ = 625nm = 625 × 10⁻⁹ m
Then we know that the speed of light, c = 3 × 10⁸ ms⁻¹
The frequency of the light can be calculated from the above-mentioned equation:
The frequency of the given visible light will be equal to:
ν = c/λ = 3× 10⁸ ms⁻¹/625 × 10⁻⁹ m = 4.8 ×10¹⁴ Hz
Therefore, the frequency of visible light is equal to 4.8 ×10¹⁴ Hz.
Learn more about wavelength and frequency, here:
brainly.com/question/18651058
#SPJ2
From acetic acid how to get formic acid ?
Answer:
The Reaction of acetic acid withNaN3 gives out methylamine. rxn of methylamine to HNO2 to give out methanol. oxidation of methanol via Kcr207(H+) to give formic acid.
What are the roles of chlorophll, light, carbon dioxide, and water in the production of food and oxygen for a plant? (15 points to answer)
Explanation:
Chlorophyll make food the plant can use from carbon dioxide, water, nutrients, and energy from sunlight. This process is called photosynthesis. During the process of photosynthesis, plants release oxygen into the air. People and animals need oxygen to breathe.
hope it helps!
Most elements are __ at room temperature
Answer:
Most elements are Solids at room temperature
how many molecules of nitrogen are in 1.25 mol N2?
Answer:
7.52 x 10²³ molecules N
Explanation:
multiply 1.25 mol of N2 by Avogadro's Number
Can someone answer 4 for me please?
Decide which element probably has a boiling point most and least similar to the boiling point of aluminum.
Comparing boiling point:
gallium rubidium magnesium oxygen
most similar to aluminum
least similar to aluminum
Answer:
The boiling point of gallium would be most similar to aluminum, and the boiling point of oxygen would be least similar to aluminum.
Explanation:
The atomic number of aluminum is 13, in the periodic table, magnesium lies in a similar period as Aluminum and Gallium is also present in a similar group. Thus, it can be expected that both magnesium and gallium exhibits similar boiling points with aluminum. However, gallium is a poor non-metal just like aluminum, while magnesium is a metal. Thus, it can be said that the boiling point of aluminum is more similar to gallium.
Now of the given elements, oxygen is a gas, thus, the boiling point of oxygen would be least similar to aluminum.
The density of aluminum is 2.7 g/cm3 and that of Al2O3 is about 4 g/cm3. Calculate the PB ratio for Aluminum. (Hint: The Pilling-Bedworth Ratio (PBR) gives the volume of oxide formed to the volume of metal atoms.)
a) 1.28
b) 0.28
c) 0.75
Answer:
1.28
Explanation:
Al = aluminium
Density of Al = 2.7g/cm³
Density of Al2O3 = 4g/cm³
Molecular weight of Aluminum = 27g/mol
Molecular weight of Al2O3= 101.96 g/mol
Pilling bedworth ratio = Rob
= M(Al2O3) * density of Al / n* molecular weight of Al * density of Al2O3
= 101.96g/mol x 2.7g/cm³/2x 27g/mol x 4g/cm³
= 275.292/216
= 1.28
From the calculation above 1.38nis the PB ratio for aluminum
Which item is denser than liquid water?
O A. wooden spoon
O B. metal fork
O
C. paper plate
D. plastic cup
For 31 points
Which is an example of a compound? * He3 or H2O or C
Answer:
H2O
Explanation:
There is more than one element
Balanced or Unbalanced
K+2MgBr=KBr+Mg
why tha homolytic dissociantion of H-H is lower than the heterolytic dissociation
Answer:
Bond cleavage, or bond fission, is the splitting of chemical bonds. This can be generally referred to as dissociation when a molecule is cleaved into two or more fragments. In general, there are two classifications for bond cleavage: homolytic and heterolytic, depending on the nature of the process. ... The singlet excitation energy of a silicon–silicon sigma bond is lower than.
A student in chemistry class mixes two clear solutions together. Which of the following is the best evidence that a chemical reaction has occurred?
Question 5 options:
The solutions are soluble when mixed together.
The volume of the liquids increased.
A Yellow precipitate is formed when mixed together.
One liquid is insoluble in the other liquid.
Answer:
a yellow precipitate is formed when mixed together
A student in chemistry class mixes two clear solutions together. Then, a Yellow precipitate is formed when mixed together.
What is the solution ?A particular kind of homogenous combination made up of two or more components is known as a solution. A solute is a material that has been dissolved in a solvent, which is the other substance in the combination.
In a combination called a solution, every component is well combined. Solutions can contain solids, liquids, and gases and are regarded as homogenous mixes. A solute plus a solvent makeup a solution. Any material that dissolves in a solvent is referred to as a solute.
Solid, liquid, and gaseous solutions can be classified as solutions based on the physical states of the solvent and solute. Both the solute and the solvent are in the solid state in solid solutions.
Thus, option C is correct.
To learn more about the solution, follow the link;
https://brainly.com/question/7932885
#SPJ2
A sample of gas occupies a volume of 350.0 mL at 840mm Hg and 33°C. Determine the volume of this sample at 600 mm By and 52°C
Answer:
V₂ = 520.42 mL
Explanation:
Given data:
Initial volume = 350.0 mL
Initial pressure = 840 mmHg
Initial temperature = 33°C (33 +273 = 306 K)
Final temperature = 52°C (52+273 = 325 K)
Final volume = ?
Final pressure = 600 mmHg
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
V₂ = P₁V₁ T₂/ T₁ P₂
V₂ = 840 mmHg × 350.0 mL × 325 K / 306 K × 600 mmHg
V₂ = 95550000 mmHg.mL.K /183600 K.mmHg
V₂ = 520.42 mL
A student mixes 50.0 mL of 1.00 M Ba(OH)2 with 83.5 mL of 0.475 M H2SO4. Calculate the mass of BaSO4 formed.
Answer:
9.26g of BaSO₄ are formed
Explanation:
The reaction of Ba(OH)₂ with H₂SO₄ is:
Ba(OH)₂ + H₂SO₄ → BaSO₄ + 2H₂O.
To solve this question we need to determine the moles of each reactant in order to find the limitng reactant. With the moles of limiting reactant we can find the theoretical moles of BaSO₄ produced and its mass, as follows:
Moles Ba(OH)₂:
50.0mL = 0.050L * (1.00mol / L) = 0.0500moles
Moles H₂SO₄:
83.5mL = 0.0835L * (0.475mol / L) = 0.0397moles
That means limiting reactant is H₂SO₄.
Based on the reaction, 1 mole of H₂SO₄ produce 1 mole of BaSO₄. The theoretical moles of BaSO₄ produced are 0.0397 moles.
The mass is (Molar mass BaSO₄: 233.38g/mol):
0.0397 moles BaSO₄ * (233.38g / mol) =
9.26g of BaSO₄ are formed2. Using cloning as a form of regenerating cells for damaged tissues is viewed at which
level?
a. Naked eye
b. Microscopic
c. Too small to even sce
d. Macroscopic
Why does the ionization energy decrease as you move down a group on the periodic table?
More neutrons in the nucleus
More electrons in the outer energy level
The size of the atom increases
Answer:
1) As you move down a group, first ionization energy decreases. WHY? Electrons are further from the nucleus and thus easier to remove the outermost one. 2) As you move across a period, first ionization energy increases.
so i think it is b
Explanation:
