Under Normal Conditions no reaction will be seen between Calcium ions (Ca⁺), NaCl (salt solution) and NaOH(sodium hydroxide).
What is a double replacement reaction ?In a double replacement reaction , the compounds present switch cation and anion to form new compounds.
But here in NaOH(sodium hydroxide) and NaCl (salt solution) the cation sodium ion Na⁺, of both the compounds is same so the end result will be same .
There will be no net reaction .
But if excess Sodium Hydroxide is added to the solution , we will see precipitate of NaCl , salt forming.
If Salt contained Ca⁺ ions , firstly NaCl will only combine with Ca⁺ ions in special conditions as Na⁺ ions are more reactive than Ca⁺ ions.
On addition of NaOH we would observe no change in normal conditions due to above stated reason .
In special conditions following reaction takes place ,in normal condition the reaction follows reverse direction.
Ca + 2 NaOH ← Ca(OH)₂ + 2 Na
Hence under Normal Conditions no reaction will be seen between Calcium ions , NaCl (salt solution) and NaOH(sodium hydroxide).
To know more about Double Displacement reaction
https://brainly.com/question/13870042
#SPJ2
aldosterone plays a primary role in adjustment of ____________ excretion.
What is atomic mass? the mass of the atom based on the mass of an atom of hydrogen-1 the mass of an atom based on the mass of an atom of carbon-12 the mass of the atom based on the mass of an atom of oxygen-16 the mass of an atom based on the number of electrons
Answer:
The mass of an atom based on the mass of an atom of carbon-12
Explanation:
NO LINKS PLEASE!!!
Which picture correctly shows the path of the reflected light ray?
Select one:
a. A
b. B
c. C
d. D
The picture that correctly shows the path of the reflected light ray is: Picture A.
A ray diagram can be defined as the graphical representation of the possible paths that a light wave takes from one point (source) to another.
Basically, some of the phenomenon and properties associated with light ray include the following:
RefractionDiffractionInterferenceReflectionA reflected light ray completely bounces off a surface and as such, light wave do not pass through the surface as illustrated in Picture A.
Read more on reflected light here: https://brainly.com/question/14320820
Help please, take a screenshot who will answer will be brainiest.
Answer:
1:
•a typical metal tends to have a higher melting and boiling point than a typical non metal which has a low melting and boiling point
•a typical metal tends to have a shiny appearance than a typical non metal which has a dull apearance
•and finally, a typical metal is a good conductor of electricity and heat while a typical non metal isn't
2:
elements E and C
3:
a, it doesn't conduct electricity
b, it's a good conductor of heat/ has a high melting point/ has a high boiling point (you can choose either that sits right with you)
Why can Marco hear the music, even though he is not in the same room as the speaker?
Answer:
Sound Travels
Explanation:
Sound waves can travel, and that makes it so that even though Marco is in a different room, he can hear the music. Depending how loud the music is and how thick the walls car, the sound can travel through the walls.
_____ is the tendency of an atom in a compound to attract electrons (F is super attractive and Fr is super unattractive).
The answer is Electronegativity.
Which is the formula for nitrogen trihydride? NH3 N3H 3NH N3H3
the answer isssssssssssssssssssssss... Nh3.
Answer: A.) NH3
Explanation:
some macromolecules are polymers. what is a polymer
Answer:
1 marcomolecules are:- A macromolecule is a very large molecule, such as a protein. They are composed of thousands of covalently bonded atoms. Many macromolecules are polymers of smaller molecules called monomers.
2 polymers are:- a natural or artificial chemical compound consisting of large molecules
Explanation:
hope it helps you
blank are produced when atoms if the elements in group 7A blank an electron
Answer:
Halide ions are produced when atoms of elements in Group 7A gain an electron.
Explanation:
can you write the answer for lot of points
[tex]\\ \sf\longmapsto Work=Force\times Displacement [/tex]
[tex]\\ \sf\longmapsto Force=\dfrac{Work}{Displacement}[/tex]
[tex]\\ \sf\longmapsto Force=\dfrac{2400}{6}[/tex]
[tex]\\ \sf\longmapsto Force=400N[/tex]
What is the acceleration of a 10 kg pushed by a 5N force
Answer:
0.5 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{5}{10} = \frac{1}{2} = 0.5 \\ [/tex]
We have the final answer as
0.5 m/s²Hope this helps you
9. Circle the element in each pair that has the greater electronegativity.
→ Ca or Ge
→ Li or o
→ CI or s
→ Br or As
Answer:
1. Ga
2. O
3. Cl
4. Br
What is the frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m?
O A) 5.40 x 10^14 m/s
O B) 5.40 x 10^14 Hz
O C) 1.85 x 10^15 m/s
O D) 1.85 x 10^15 Hz
The frequency of yellow light, which has a wavelength of 5.56 x 10^-7 m is 5.40 x 10^14 Hz. Therefore, option B is correct.
What do you mean by wavelength ?The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength. This length is typically specified in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).
The wavelength is the distance between two wave crests, and it is also the distance between two wave troughs. The frequency is measured in cycles per second (Hz) and is the number of vibrations that pass over a given spot in one second (Hertz).
Speed is distance over time, Therefore, v = λ / T.
The frequency, f, is 1/T, so the equation relating wave speed, frequency, and wavelength is v = c / λ .
Given :
Wavelength = 5.56 x 10^-7 m
Frequency = ?
Speed (c) = 3 × 10⁸m/s
v = c / λ
By substituting given values in equation and we get,
v = 3 × 10⁸ / 5.56 x 10^-7
= 5.40 x 10^14
The frequency of yellow light is 5.40 x 10^14.
Thus, option B is correct.
To learn more about the wavelength, follow the link;
https://brainly.com/question/13533093
#SPJ6
Describe the procedural steps to achieve adequate separation of a homogeneous, liquid mixture containing benzoic acid, n-propylbenzene, and phenol, provided a 4:1 hexane to ethyl acetate solution as the eluent, using Thin Layer Chromatography (TLC).
n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.
Thin layer chromatography involves the separation of a mixture using a stationary phase made of silica gel on a glass plate and an appropriate mobile phase. The extent of separation is highly dependent on the magnitude of interaction between the solute and the mobile phase. and stationary phase.
The first step in thin layer chromatography is to make a thin mark at the bottom portion of the plate then spot the plate with the sample. The mobile phase is now introduced into the TLC chamber a little below the mark. The plate is now placed in the stationary phase such that the mark is above the solvent level.
The TLC chamber is now covered and enough time is allowed for separation to occur. The spots can be seen using a suitable indicator dye or with a the aid of UV light
After the separation of a homogeneous, liquid mixture containing benzoic acid, n-propylbenzene, and phenol, provided a 4:1 hexane to ethyl acetate solution as the eluent, we can see that n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.
Learn more: https://brainly.com/question/967776
Can anyone please answer questions 3 and 4
I’ll give the brainiest!
Answer:
1.Phenolphthalein
2.Method
a.Use the pipette and pipette filler to add 25 cm 3 of alkali to a clean conical flask.
b.Add a few drops of indicator and put the conical flask on a white tile.
c.Fill the burette with acid and note the starting volume.
d.Slowly add the acid from the burette to the alkali in the conical flask, swirling to mix.
Explanation:
What would happen if we didn’t have the Milky Way
What is the correct definition of Earth's energy budget?
it's a balance between that reaches the earth and the sun.
Can I have brainlist please
How many atoms of lithium are there in 18.2mg of lithium? Dimensional analysis only!
Answer:7.25
Explanation:
This is because 18.2 - 7.2 = 11 +7.2 = 18.2
. Nếu dẫn 0,01 mol CO2 vào 50 ml dung dịch Ba(OH)2 0,1M thì sau phản ứng thuđược
A. BaCO3
B. Ba(HCO3)2
C. BaCO3 vàBa(HCO3)2
D. BaCO3 vàBa(OH)2
what are anibiotcs made of
just interested
Answer:
please mark as brainliest
Explanation:
Any substance that inhibits the growth and replication of a bacterium or kills it outright can be called an antibiotic. Antibiotics are a type of antimicrobial designed to target bacterial infections within (or on) the body. This makes antibiotics subtly different from the other main kinds of antimicrobials widely used today:
Antiseptics are used to sterilise surfaces of living tissue when the risk of infection is high, such as during surgery.
Disinfectants are non-selective antimicrobials, killing a wide range of micro-organisms including bacteria. They are used on non-living surfaces, for example in hospitals.
Of course, bacteria are not the only microbes that can be harmful to us. Fungi and viruses can also be a danger to humans, and they are targeted by antifungals and antivirals, respectively. Only substances that target bacteria are called antibiotics, while the name antimicrobial is an umbrella term for anything that inhibits or kills microbial cells including antibiotics, antifungals, antivirals and chemicals such as antiseptics.
Most antibiotics used today are produced in laboratories, but they are often based on compounds scientists have found in nature. Some microbes, for example, produce substances specifically to kill other nearby bacteria in order to gain an advantage when competing for food, water or other limited resources. However, some microbes only produce antibiotics in the laboratory
Answer:
Antibiotics commonly are produced by soil microorganisms and probably represent a means by which organisms in a complex environment, such as soil, control the growth of competing microorganisms. Microorganisms that produce antibiotics useful in preventing or treating disease include the bacteria and the fungi.
Explanation:
source: trust me bro
How to tell if a reaction is exothermic.
Answer:
If the reaction loses heat it is exothermic.
_ is the process in which an element spontaneously transforms into another isotope of the same element, or into a different element.
Answer:
Nuclear transmutation
Explanation:
The process in which an element spontaneously transforms into another isotope of the same element, or into a different element is called nuclear transumutation. It occurs when the number of protons or neutrons in the nucleus of an atom is changed.
Which two factors will improve the efficiency of an inclined plane?
the answer is using rollers in conjunction with inclined plane.
To make hot cocoa on the trip, you will need to boil water. Construct an
explanation that describes how the lower air pressure in the mountains affects
this process.
i need an answer in under an hour pls help
Answer:
the water in the mountains will take longer to boil, because of the higher atmospheric pressu
no links plz!!
CaOCl2 parent acid and base???
Answer:
this is not and reaction of acid and base.(CaOCL2)
Explanation:
Ca2, Cl, are base and O is a neutral.
so how can that be a acid and base reaction
Is the following sentence true or false?
The properties of a metal are related to bonds within the metal,
Answer:
True.
Explanation:
In metallic bonds, nuclei of metal atoms line up uniformly and the electrons are delocalized (spread out evenly). Since this allows electrons to move around freely, and electricity is created by the flow of electrons, metals can conduct electricity.
Which of the following are required for plants to carry out photosynthesis?
Answer:
To perform photosynthesis, plants need three things: carbon dioxide, water, and sunlight
How do plants slow down erosion?
They slow down water as it runs downhill.
They speed up water as it runs downhill.
Their roots crack open rocks.
Their roots create new rock.
Answer:
I'm thinking the answer is gonna be it slows it down as it runs down hill
Fill in the [?]
1.7 km = [?]m
Give your answer in standard form.
Answer: 1.7 km = [1700]m
1.7 × 10^3
Explanation:
Answer:
1700 meters
Explanation: hope it helps.
After a few minutes of boiling, Francisco removes the pressure cooker from the heat and lets it sit for 15 minutes. How will this affect the particles in the water vapor inside the cooker?
Choose the correct answer.
They will collide with each other more often.
They will collide with the walls of the pressure cooker more often.
They will collide with the walls of the pressure cooker less often.
They will begin to collide with air particles rather than the liquid water particles.
Answer:
Pressure Cooking
Explanation:
Pressure cooking is a very old cooking method that’s experienced a recent resurgence thanks to a new generation of cookers that promise a speedy, set-it-and-forget-it path to dinner. These devices, whether electrical or stovetop, are all much safer than those of decades ago (which tended to explode), with mechanisms to prevent them from accumulating too much pressure. If you read the owner’s manual carefully, however, you’ll still find one important precaution to take when cooking under pressure: adding water. Water and pressure cooking go hand in hand. In fact, it’s water that helps generate the high-pressure environment that makes your food cook faster.
Most pressure cooker instructions state a minimum amount of water required for pressure cooking even a tiny amount of food. Inside the tightly sealed pressure cooker, the water is heated and eventually boils into steam. Since the steam cannot escape, it collects above the food. All those trapped water molecules increase the pressure inside the cooker.
