A student is examining a chemical reaction the student notes that the reaction requires 7.14 kcal mol energy per biomlecule synthesized the reaction itself produces 21.42 kcal mol energy the sutdent argues this is enough energy to make 3 biomecules. What error has the student made in the analysis?

a. The studentiras not remembered the Second Law of Thermodynamics.
b. The students has not remembered the First Law of Thermodynamics.
c. The student has made a simple calculation error
d. The student has made a conversion error

Answer:

Identify each of the following as endothermic or exothermic.

a. Water in a pond evaporates.

b. Methane gas burns on a stovetop.

c. Water freezes to form ice.

d. Energy flows from the system to the surroundings.

e. Energy flows from the surroundings to the system.

Explanation:

An exothermic reaction is the one in which heat energy is released.

An endothermic reaction is one in which heat energy is absorbed.

a. Water in a pond evaporates.

This process absorbs heat energy.

Hence, this is an example of an endothermic process.

b. Methane gas burns on a stovetop and release heat energy and hence this is an example of an exothermic reaction.

c. Water freezes to form ice.

In this process heat energy is released.So this is an example of exothermic reaction.

d. Energy flows from the system to the surroundings.

That means heat energy is released into the surroundings.

So, this is an example of exothermic process.

e. Energy flows from the surroundings to the system.

That means energy is absorbed by the system.

So, it is an endothermic process.

Answer:

7.16 × 10⁻³ M

Explanation:

Let's consider the reduction reaction of copper during the electroplating.

Cu²⁺(aq) + 2 e⁻ ⇒ Cu(s)

We can calculate the moles of Cu²⁺ present in the solution using the following relations.

The moles of Cu²⁺ reduced are:

[tex]2.30 min \times \frac{60s}{1min} \times \frac{3.00C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molCu^{2+} }{2mole^{-} } = 2.15 \times 10^{-3} molCu^{2+}[/tex]

[tex]2.15 \times 10^{-3} moles[/tex] of Cu²⁺ are in 0.300 L of solution.

[Cu²⁺] = 2.15 × 10⁻³ mol/0.300 L = 7.16 × 10⁻³ M

Answer:

A

Explanation:

Answer:

the Rhyniognatha hirsti

Explanation:

at age 400 million years old

Answer:

Yes.

Explanation:

Yes, enough folic acid in the body by the early weeks of pregnancy helps to prevent spina bifida. The body of woman uses folate during the pregnancy which produces red and white blood cells that help your baby to grow. Folate also lowers the risk of neural tube defect (NTD) in the unborn baby. Neural tube defect (NTDs) are the serious birth defects that greatly affect the spinal cord, brain and skull of the baby.

Answer:

Laws governing gas behavior.

Explanation:

Boyle's law:

It relates the pressure and volume of an ideal gas at a constant temperature.

According to this law:

"The volume of a fixed amount of gas at constant temperature is inversely proportional to its pressure".

[tex]P \alpha V[/tex].

Charle's law:

It relates the volume and absolute temperature of an ideal gas at a constant pressure.

According to this law:

"The volume of a fixed amount of gas at constant pressure is directly proportional to its absolute temperature".

[tex]V \alpha T[/tex].

Avogadro's law:

According to this law:

equal volumes of all gases under the same conditions of temperature and pressure contain, an equal number of moles.

[tex]V \alpha n[/tex].

Ideal gas equation:

By combining all the above-stated gas laws, this equation is formed as shown below:

[tex]V \alpha \frac{nT}{P} \\=> V= R. nT/ P\\=>PV=nRT[/tex]

R is called universal gas constant.

It has a value of 0.0821L.atm.mol-1.K-1.

Answer:

Boyle's law, Charle's law,  Guy Lussac's law and Avogadro's law

Explanation:

All the gases behaves similarly when the environment conditions are normal. But when the physical condition changes like when the pressure, volume or temperature changes, the gas behaves differently and shows a deviation.

The number of gas laws are :

Boyle's Law

Boyle's law states that when the temperature remaining constant, the pressure of the gas varies inversely to the volume of the gas.

i.e.   [tex]P \propto \frac{1}{V}[/tex]

Charle' law

Charle's law states that when pressure is constant, the temperature of a gas is directly proportional to the volume.

i.e. , [tex]$T \propto V$[/tex]

Gay Lussac's law

Gay - Lussa law states the volume and the mass of the pressure of the gas is directly proportional to the  temperature of the gas.

i.e. P.T = constant

Avogadro's law

It states that under the conditions of same pressure as well as temperatures, the gases having equal volumes will have same numbers of molecules.

i.e. [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex] = constant

Answer:

D. the minerals they contain

Hope this answer is right!!

Answer:

2.5 × 10² ppm

Explanation:

Step 1: Given data

Step 2: Convert 0.050 g to μg

We will use the conversion factor 1 g = 10⁶ μg.

0.050 g × 10⁶ μg/1 g = 5.0 × 10⁴ μg

Step 3: Calculate the concentration of NaCl in ppm

The concentration of NaCl in ppm is equal to the micrograms of NaCl per gram of the sample.

5.0 × 10⁴ μg NaCl/200. g = 2.5 × 10² ppm

Answer:250 ppm

Explanation:

Answer:

The correct answer is - d. hydrogen bonding.

Explanation:

Water has strong hydrogen bonds between its molecules that require a very high amount of energy in order to break. Water molecules are joined together or bound with a strong intermolecular force called hydrogen bonds.

These bonds require more kinetic energy which means more temperature or heat in order to break the bonds and turn into steam and this is the reason it has a high boiling point.

Answer: The value of i is 1.4 and 40% dissociation of 100 particles of zinc sulfate will yield 60 undissociated particles.

Explanation:

The equation used to calculate the Vant' Hoff factor in dissociation follows:

[tex]\alpha =\frac{i-1}{n-1}[/tex]

where,

[tex]\alpha [/tex] = degree of dissociation = 40% = 0.40

i = Vant' Hoff factor

n = number of ions dissociated = 2

Putting values in above equation, we get:

[tex]0.40=\frac{i-1}{2-1}\\\\0.40=i-1\\\\i=1.4[/tex]

The equation used to calculate the degee of dissociation follows:

[tex]\alpha =\frac{\text{Number of particles dissociated}}{\text{Total number of particles taken}}[/tex]

Total number of particles taken = 100

Degree of dissociation = 40% = 0.40

Putting values in above equation, we get:

[tex]0.40=\frac{\text{Number of particles dissociated}}{100}\\\\\text{Number of particles dissociated}=(0.40\times 100)=40[/tex]

This means that 40 particles are dissociated and 60 particles remain undissociated in the solution.

Hence, 40% dissociation of 100 particles of zinc sulfate will yield 60 undissociated particles.

Explanation:

this explanation may help u to understand:)

Answer:

The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.

Explanation:

Buffer capacity is defined as the moles of an acid or base that are needed to change the pH of a buffer in 1 unit.

A more concentrated solution of acetic buffer contains more moles of the acid per liter of solution. A solution that contains more moles of the acetic ion or the acetic acid requires more moles of base or acid to change the pH, that means:

The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.

Answer:

C₁₅N₃H₅

Explanation:

Let's assume we have 240 g of the dye (1 mol), in that case we'd have:

Now we convert the masses of each element into moles, using their respective molar masses:

Thus the molecular formula is C₁₅N₃H₅.

Answer:

The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.

Explanation:

Answer:

Option 1. NO

Explanation:

The balanced equation for the reaction is given below below:

4NH₃ + 6NO —> 5N₂ + 6H₂O

From the balanced equation above,

4 moles of NH₃ reacted with 6 moles of NO.

Finally, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

4 moles of NH₃ reacted with 6 moles of NO.

Therefore, 1.24 moles of NH₃ will react with = (1.24 × 6)/4 = 1.86 moles of NO

From the calculation made above, we can see that a higher amount of NO (i.e 1.86 moles) than what was given (i.e 1.79 moles) is needed to react completely with 1.24 moles of NH₃.

Therefore, NO is the limiting reactant and NH₃ is the excess reactant.

Thus, the 1st option gives the correct answer to the question

Answer:

1. NO .

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to identify the limiting reactant by simply calculating the moles of any product, say N2, via the moles of each reactant and including the corresponding mole ratio (4:5 and 6:5):

[tex]1.24molNH_3*\frac{5molN_2}{4molNH_3}=1.55molN_2 \\\\1.79molNO*\frac{5molN_2}{6molNO}=1.50molN_2[/tex]

Thus, since NO yields the fewest moles of N2 product, we infer it is the limiting reactant.

Regards!

Answer:

25%

Explanation:

Cystic fibrosis is a recessive allele, meaning that the child must be aa to suffer the symptoms. Only 1/4 of the paired alleles is aa, so the probability of getting cystic fibrosis would be 25%.

Answer:

The maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water = 94.9%

Note: The question is incomplete. A similar but complete question is given below:

The solubility of benzoic acid in water is 6.80g per 100mL at 100 degrees C and 0.34 g per 100mL at 25 degrees C.

Calculate the maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water, assuming the solution is filtered at 25 degrees C.

Explanation:

Solubility of benzoic acid in water at 100 degrees C = 6.80g per 100mL

Solubility of benzoic acid in water  at 25 degrees C =  0.34 g per 100mL

Mass of benzoic acid to be theoretically recovered from 100 mL of water = 6.80 g - 0.34 g = 6.46 g

At 25 degrees;

0.34 g of benzoic acid is present in 100 mL of water

x g of  benzoic acid will be present in 15 mL of water

x = 0.34 × 15 / 100 = 0.051 g

Mass of benzoic acid to be theoretically recovered from 25 mL of water = 1.00 g - 0.051 g = 0.949 g

Maximum theoretical percent recovery = (mass recovered / original mass dissolved) x 100%

Maximum theoretical percent recovery =  (0.949 / 1.00) × 100% = 94.9 %

Therefore, the maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water = 94.9%

Answer:

False

Explanation:

Roman numerals are seen in the names of several compounds. They often appear immediately after the name of central atom in the molecule.

These Roman numerals are used to depict the oxidation state of the central atom in the molecule and not to show how many of that ion appear in the formula.

For instance, in carbon IV oxide, the Roman numeral IV shows that the central atom in the compound-carbon is in the +4 oxidation state.

Answer:

the value of H° is below -6535 kj. +6H2O

Explanation:

6H2O answer solved

For the given reaction, 2 moles of C₆H₆ the heat energy released is - 6535 KJ. Then, for 16 g of the compound or 0.205 moles needs 669.83 KJ of heat released in combustion.

Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, typically oxygen, resulting in the release of heat, light, and various combustion products, such as carbon dioxide and water vapor.

The process of combustion involves a rapid and exothermic (heat-releasing) oxidation reaction that produces a flame, which is visible in many cases.

Here, 2 moles of the hydrocarbon releases - 6535 KJ of energy.

molar mass of C₆H₆ = 78 g/mol

then no.of moles in 16 g = 16 /78 = 0.205 moles.

then energy released by 0.205 moles  = 0.205 moles × 6535 KJ /2 moles = 669.83 kJ

Therefore, the heat energy released by 16 g of the compound in combustion is 669.83 kJ.

Find more on combustion :

https://brainly.com/question/13153771

#SPJ2

Answer:

d. 4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Explanation:

Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coats the metal preventing it from further oxidation: aluminum oxide. Aluminum is a cation with charge 3+ (Al³⁻) and oxide is an anion with charge 2- (O²⁻). Thus, the neutral compound aluminum oxide has the chemical formula Al₂O₃. The unbalanced chemical equation is:

Al(s) + O₂(g) → Al₂O₃(s)

We can balance using the trial and error method. First, we will balance O atoms by multiplying Al₂O₃ by 2 and O₂ by 3.

Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Finally, we get the balanced equation by multiplying Al by 4.

4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Answer:

A 1.0 g sample of propane, C3H8, was burned in the calorimeter.

The temperature rose from 28.5 0C to 32.0 0C and the heat of combustion 10.5 kJ/g.

Calculate the heat capacity of the calorimeter apparatus in kJ/0C

Explanation:

[tex]Heat of combustion = heat capacity of calorimeter * deltaT\\[/tex]

Given,

The heat of combustion = 10.5kJ/g.

[tex]deltaT = (32.0-28.5)^oC\\deltaT = 3.5^oC[/tex]

Substitute these values in the above formula to get the value of heat capacity of the calorimeter.

[tex]deltaT =heat capacity of calorimeter * (change in temperature)\\10.5kJ/g = heat capacity of calorimeter * (3.5^oC)\\\\=>heat capacity of calorimeter = \frac{10.5kJ/g}{3.5^oC} \\=>heat capacity of calorimeter = 3.0 kJ/g.^oC[/tex]

Answer:

The heat capacity of the calorimeter is [tex]3.0kJ/g.^oC.[/tex]

Answer:

25.46 mL

Explanation:

In a titration we use the volume and concentration of a solution to determine the previously unknown concentration of other solution. Let's consider the titration of an acid of unknown concentration with a standardized base (a base whose concentration we know). The generic neutralization reaction is:

HA + BOH ⇒ BA + H₂O

The base is in the buret and we will add it to the acid until the equivalence point is reached. The volume of base used is equal to the difference between the final reading of the buret and the initial reading of the buret.

V = 27.30 mL - 1.84 mL = 25.46 mL

Answer:

40.4 kJ

Explanation:

Step 1: Given data

Step 2: Calculate the moles corresponding to 55.0 g of CO₂

The molar mass of CO₂ is 44.01 g/mol.

n = 55.0 g × 1 mol/44.01 g = 1.25 mol

Step 3: Calculate the heat (Q) required to sublimate 1.25 moles of CO₂

We will use the following expression.

Q = n × ΔH°sub

Q = 1.25 mol × 32.3 kJ/mol = 40.4 kJ

Answer:

1. 306,000: three significant figures because the last three zeros are not preceded by a decimal point.

2. 0.0073: two significant figures because the the leftmost zeros are not significant.

3. 39.9999: six significant figures because all these numbers are nonzero digits.

4. 25.00: four significant figures because right-handed zeros, after a decimal point, are significant.

5. 40,000,021: eight significant figures because intermediate zeros are significant.

6. 45,250.0: six significant figures because al the zeros are to the right of the nonzero digits.

7. 0.00011: two significant figures as well as #2.

8. 420.030700: nine significant figures because all the zeros are to the right of the first nonzero digits and after the decimal point.

Explanation:

Hello there!

In this case, by considering the given numbers, we can proceed as follows, by keeping in mind the rules for assigning significant figures:

1. 306,000: three significant figures because the last three zeros are not preceded by a decimal point.

2. 0.0073: two significant figures because the the leftmost zeros are not significant.

3. 39.9999: six significant figures because all these numbers are nonzero digits.

4. 25.00: four significant figures because right-handed zeros, after a decimal point, are significant.

5. 40,000,021: eight significant figures because intermediate zeros are significant.

6. 45,250.0: six significant figures because al the zeros are to the right of the nonzero digits.

7. 0.00011: two significant figures as well as #2.

8. 420.030700: nine significant figures because all the zeros are to the right of the first nonzero digits and after the decimal point.

Regards!

Answer: In the reaction:

a) The reactants are: P

b) The products are: M and N

Explanation:

The given reaction equation is as follows.

[tex]P \rightarrow M + N[/tex]

Reactants are the species present on the left side on an arrow in a chemical reaction equation.

On the other hand, products are the species which are present on the right side of an arrow in a chemical reaction equation.

Hence, in the given reaction equation P is the reactant. Whereas M and N are the products.

Thus, we can conclude that in the reaction:

a) The reactants are: P

b) The products are: M and N

Answer:

false all producers are at the top of food web

Answer:

B. 4 ham slices

Explanation:

A chemical reaction involves one or more substances known as reactants combining chemically to give one or more substances known as products.

Reactants in chemical reactions combine in definite mole or mass ratios to give products. Therefore, when one substance is present in excess of what is required to combine with another to form products, that substance is known as the excess reagent. The other substance which is present in a smaller amount and which when used up, the reaction stops is known as the limiting reagent.

From the illustration of the sandwiches in the question, the recipe for one sandwich represents the chemical equation of a reaction. The equation form is given below:

2 cheese slices + 1 ham slice + 2 bread slices ---> 1 sandwich

The ratio of the reactant is 2 : 1 : 2

From the available ingredients, 12 cheese slices, 10 ham slices, 12 bread slices.

12 cheese slices will require 6 ham slices and 12 bread slices to produce 6 sandwiches.

However, since there are 10 ham slices, 4 ham slices will be left over unused. This is the excess or leftover reactant.

Answer:

B. 4 ham slices

Explanation:

Got it right on the test