Answer:
Gold and pyrite both have a brilliant metallic luster, but are different tones of yellow. Gold is golden to silvery yellow, whereas pyrite is a pale to medium brassy yellow that sometimes tarnishes.
Explanation:
23. What type of chemical reaction is: CH, + 0→ CO2 + H20
a. Combustion
b. Neutralization
C. Synthesis
d. Double Replacement
Answer:
combustion
Explanation:
bsnszisb idiej jeiieyv
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
chlorine is larger so the symbol is <
Explanation:
Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.
Answer:
Catalysts allow chemical reactions to occur at temperatures at which the organism lives.
Explanation:
Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.
Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.
6. Which of the following represent kinetic energy? *
(1 Point)
the water behind a dam
O a boulder hug from a net over a pit
a calculator falling to the floor
the string on a bow before being released
Answer:
weter
Explanation:
Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion
Explanation:
Anything that occupies space and has mass is called matter.
(a) Inter particle space
Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.(b) Inter particle force of attraction
Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.(c) Particle motion
Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids.the correct sequence where reactivity towards oxygen increases.
Answer:
Option D is good to go!
Explanation: as per the reactivity series more reactive substances will react with the counterpart substance.The most reactive substance here is calcium while the least reactive is aluminium, the magnesium comes in between.As per their reactivity, these substances will react with oxygen.
Explanation:
Struggling on this problem.
Answer:
4Al + 3O2 ----> 2Al2O3
Explanation:
first blank 4
second blank 3
third blank 2
How many atoms are in 9.8 moles of NaCl?
Answer:
a lot but im pretty sure if u just take avogadros number and multiply it by 9.8 u get the answer
Explanation:
There are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl. Details about number of atoms can be found below.
How to calculate number of atoms?The number of atoms of a compound can be calculated by multiplying the number of moles of the substance by Avogadro's number.
no of atoms = no of moles × 6.02 × 10²³
According to this question, there are 9.8 moles of NaCl.
no of atoms = 9.8 × 6.02 × 10²³
no of atoms = 5.896 × 10²⁴
Therefore, there are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl.
Learn more about number of atoms at: https://brainly.com/question/8834373
#SPJ2
existen mas de 10 millones de cmpuestos organicos o inorganicos
so dfhhdjdjjfjfjjdjdjdj
Se realiza una mezcla de minerales de Cu y Fe: 20 kg FeS2 (pirita), 70 kg de Fe2O3 (hemetita) 15 kg de CuFe2 (calcopirita) y 90 kg de CuO (tenorita). Calcule: Porcentaje de hierro Porcentaje de cu Porcentaje de azufre y oxigeno
Answer:
34.78% Fe
39.66% Cu
5.48% S
20.07% O
Explanation:
Para resolver esta pregunta debemos hallar la masa de cada átomo en cada mineral. Así, podremos hallar el porcentaje de cada átomo:
Pirita (Fe: 55.845g/mol; S: 32.065g/mol; FeS2: 119.975g/mol)
Masa Fe:
20kg FeS2 * (1*55.845g/mol / 119.975g/mol) = 9.31kg Fe
Masa S:
20kg FeS2 * (2*32.065g/mol / 119.975g/mol) = 10.69kg S
Hemetita (Fe: 55.845g/mol; O: 16g/mol; Fe2O3: 159.688g/mol)
Masa Fe:
70kg Fe2O3 * (2*55.845g/mol / 159.688g/mol) = 48.96kg Fe
Masa O:
70kg Fe2O3 * (3*16g/mol / 159.688g/mol) = 21.04kg O
Calcopirita (Fe: 55.845g/mol; Cu: 63.546g/mol; CuFe2: 175.236 g/mol)
Masa Fe:
15kg CuFe2 * (2*55.845g/mol / 175.236 g/mol) = 9.56kg Fe
Masa Cu:
15kg CuFe2 * (1*63.546g/mol / 175.236 g/mol) = 5.44kg Cu
Tenorita (O: 16g/mol; Cu: 63.546g/mol; CuO: 79.545 g/mol)
Masa O:
90kg CuO * (1*16g/mol / 79.545 g/mol) = 18.10kg O
Masa Cu:
90kg CuO * (1*63.546g/mol / 79.545 g/mol) = 71.90kg Cu
Masa Total: 20kg + 70kg + 15kg + 90kg = 195kg
Porcentaje Hierro:
9.31kg Fe + 48.96kg Fe + 9.56kg Fe / 195kg * 100 =
34.78% Fe
Porcentaje Cobre:
5.44kg Cu + 71.90kg Cu / 195kg * 100 =
39.66% Cu
Porcentaje Azufre:
10.69kg S / 195kg * 100 =
5.48% S
Porcentaje Oxígeno:
21.04kg O + 18.10kg O/ 195kg * 100 =
20.07% O
What is the volume of .750 M hydrochloride acid required to react completely with 25.00 mL of .290 M NaOH solution?
from
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
from
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Va=9.67ml
The volume of .750 M hydrochloride acid is required to react completely with 25.00 mL of .290 M NaOH solution is 9.67ml
HCl + NaOH----> NaCl +H2O
n of acid=1
n of base=1
Molarity of acid=750M
Molarity of base=290M
volume of base=25ml
Therefore,
Va=Mb ×vb×na
Ma×nb
Va=290×25×1
750×1
Va=7250
750
Hence,
Va=9.67ml
What is Hydrochloric acid?
Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctively pungent smell. It is classified as a strong acid. It is a component of the gastric acid in the digestive systems of most animal species, including humans. Hydrochloric acid is an important laboratory reagent and industrial chemical.
Learn more about Hydrochloric acid
https://brainly.com/question/27808720
#SPJ2
_______ reach the surface first during an earthquake.
Rayleigh waves
P waves
Love waves
S waves
This graph represents a population of molecules in a gas versus the distribution of the average velocity(speed) of its molecules in that population. Assume all molecules to be of the same mass. In reading the graph, it is important to note three things. One, is the most probable speed is at the peak of the curve. Secondly, the most probable speed increases as the temperature increases (so shift to the right), and the distribution broadens as it increases.
On the graph, indicate the average kinetic energy of the population.
Explain your answer.
What part of the graph indicates the temperature of the sample?
Explain your answer.
Sketch a curve that represents the distribution of molecules at a temperature below the one shown. Label it as T2. Describe both T and T2 in terms of their average kinetic energy. Be specific and detailed.
Submit your answer below.
Answer:
Part A
Given that the graph is symmetrical and bell shaped, the average kinetic energy is given by the midline of graph, which corresponds to the common speed of the highest number of the population
Part B
The formula for the average kinetic energy, K.E. = (3/2)·(R/NA)·T
Therefore, the part of the graph that indicates the temperature of the sample is the average kinetic energy. K.E.
Part C
At a lower temperature, the heat is less evenly distributed and we have the distribution T2 higher than T1
Please see the attached graph created with MS Visio
Explanation:
A certain element has two naturally occurring isotopes. The atomic mass of isotope 1 (35.4723 % natural abundance) is 184.9529 amu. Determine the atomic mass of isotope 2. The average atomic mass of the element is 186.2071 amu. Do not include units; report answer to 4 decimal places.
Answer:
the value
Explanation:
What is a natural disaster?
Answer:
Explanation:
A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes
Answer:
A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.
What is the uses of seawater as a source of renewable energy?
Explanation:
Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.
Write the electron configuration for Gold (Au). You may choose to write it in the long form or in the noble gas configuration form (shortcut).
Answer:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s¹4f¹⁴5d¹⁰
Explanation:
Q.does salt make water boil at a higher temperature?
Answer:
Yes
Explanation:
The salt increases the boiling point, meaning it make water boil at a higher temperature, and it decreases the specific heat capacity, meaning it will heat up quick.
Why would the electrolysis reaction stop if the battery was removed
If the battery was removed, the energy produced by the battery would not be able to continue its path along the circuit.
(04.03 MC)
The table shows the nature of the reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
lonic compound + lonic compound
Products
lonic compound + lonic compound
Which of the following is true about this type of chemical reaction?
It is a single replacement reaction, and all four compounds are different.
It is a double replacement reaction, and all four compounds are different.
It is a single replacement reaction, and each compound has the same set of ions.
It is a double replacement reaction, and each compound has the same set of ions.
Answer: The given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.
Explanation:
When two different compounds chemically react with each other and their ions get exchanged with each other then it leads to the formation of two new compounds. This type of reaction is called double displacement reaction.
For example, [tex]KBr + AgNO_{3} \rightarrow KNO_{3} + AgBr(\downarrow)[/tex]
Here, both KBr and [tex]AgNO_{3}[/tex] are ionic compounds that leads to the formation of two new ionic compounds which are [tex]KNO_{3}[/tex] and AgBr.
Thus, we can conclude that the given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.
Valence electrons are important when drawing molecular structures because
a. They are closest to the nucleus of the atom and do not participate in chemical
bonding
b. They are closest to the nucleus of the atom and participate in chemical
bonding
c. They are farthest away from the nucleus of the atom and do not participate in
chemical bonding
d. They are farthest away from the nucleus of the atom and participate in
chemical bonding
Answer:
d
Explanation:
Valence electrons are in the outermost shell. They form chemical bonds with other elements, not any other electrons. Hope this helps!
what is a metal ore?
Answer:
metal ores are naturally occurring rocks that contain metals or metal compounds in sufficient amounts to make it worthwhile extracting them
any of ya'll good at chemistry?????
Answer:
i good at chemistry
Explanation:
not all but i try
The part of an atom that has an overall positive charge is called
A)
an electron
B)
the nucleus
C)
the first shell
D)
the valence shell
Answer: I think it’s B
what are some different natural events and man-made activities that can affect ocean acidification?
Ocean acidification is the process of decreased pH levels of the oceans. The burning of fossil fuels and industrialization are man-made activities that lead to this process.
What is Ocean acidification?Ocean acidification is an increased concentration of acidic components of the oceans due to an increase in the carbon dioxide level of the oceans.
Human activities like cutting down a large number of trees, discharging from industrial outlets, and burning fossils like petrol, coal, diesel, etc. are leading to increased acidification of the oceans.
Therefore, natural causes like increased salinity, flood, and earthquake are the reasons for oceanic acidification.
Learn more about ocean acidification here:
https://brainly.com/question/7604502
a sample of silver has a volume of 6 cm^3 and a massage of 36 grams what's the samples density
Answer:
6g/cm³
Explanation:
Density of a substance can be calculated as follows:
Density = mass (g)/volume (cm³)
According to this question, a sample of silver has a volume of 6 cm³ and a mass of of 36g. The density will be
Density = 36/6
Density = 6g/cm³
A block is pulled 0.90 m to the right in 2.4 s. What is the block's average speed to the nearest hundredths of a m/s?
Describe the formation of calcium chloride (4 marks)
Answer:
It is an ionic compound that consists of one calcium cation Ca2+ and two chlorine anions. The bivalent calcium metal forms an ionic bond with two chlorine atoms. The formation of cacl2 happens mainly by reacting limestone (CaCo3) with hydrochloric acid (HCl).
Using the following balanced equation, if you had 48 molecules of O2,
how many molecules of SO3 would you produce?
S8 + 12O2 --> 8SO3
Explanation:
hope this helps u understand:)
How much mass does 1 mol of O2 gas have?
O A. 16.00 x 2g
O B. 16.00 x (6.02 x 10^23) g
C. 2 x (6.02 x 10^23) g
D. 16.00 g
Answer:
Option A.
Explanation:
1 mol of anything contains 6.02×10²³ particles.
We know that 1 mol of oxygen gas contains 2 moles of O.
1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.
By the way, the mass for 1 mol of O₂ may be:
Option A → 16 g/mol . 2 mol
32 g
Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.
Another example can be:
1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.
