A student mixed 50 ml of 1.0 M HCl and 50 ml of 1.0 M NaOH in a coffee cup calorimeter and calculate the molar enthalpy change of the acid-base neutralization reaction to be –54 kJ/mol. He next tried the same experiment with 100 ml of 1.0 M HCl and 100 ml of 1.0 M NaOH. The calculated molar enthalpy change of reaction for his second trial was:

Answer:

[tex]pH=2.28[/tex]

Explanation:

Hello,

In this case, for the acid dissociation of formic acid (HCOOH) we have:

[tex]HCOOH(aq)\rightarrow H^+(aq)+HCOO^-(aq)[/tex]

Whose equilibrium expression is:

[tex]Ka=\frac{[H^+][HCOO^-]}{[HCOOH]}[/tex]

That in terms of the reaction extent is:

[tex]1.8x10^{-4}=\frac{x*x}{0.16-x}[/tex]

Thus, solving for [tex]x[/tex] which is also equal to the concentration of hydrogen ions we obtain:

[tex]x=0.00528M[/tex]

[tex][H^+]=0.00528M[/tex]

Then, as the pH is computed as:

[tex]pH=-log([H^+])[/tex]

The pH turns out:

[tex]pH=-log(0.00528M)\\\\pH=2.28[/tex]

Regards.

Answer:

A

Explanation:

Absorbing moisture to protect goods from damage. Hence, option A is correct.

Silica gel is a desiccant, or drying agent, that manufacturers often place in little packets to keep moisture from damaging certain food and commercial products.

Silica Gel is a good drying agent for preventing corrosion, contamination, spoilage, and mould growth in many commodities and products due to its physical properties.

Learn more about silica gel here:

https://brainly.com/question/18723447

#SPJ2

Answer:

A. Saturated acids  -  1. myristic acid, 4. palmitic acid

B. Monounsaturated acids  - 2. oleic acid

C. Polyunsaturated acids -  3. linoleic acid

Explanation:

Saturated fatty acids are the fats combined together with a single bond and no double or triple bond while unsaturated fatty acids are the fats having a double or triple bond between them.

Monosaturated acids have only one double or triple bond while polyunsaturated acids have more than one double or triple bond.

So, an appropriate match of given acids are:

A. Saturated acids  - Myristic acid (CH3(CH2)12COOH) and Palmitic acid (CH3(CH2)14COOH) dont have any double or triple bonds.

B. Monounsaturated acids  - Oleic acid (CH3(CH2)7CH=CH(CH 2)7COOH) have only one double bond.

C. Polyunsaturated acids - Linoleic acid (HOC–7CH=CH–CH 2–CH=CH–3H) has two double bonds.

Hence, the correct answer is:

A. Saturated acids  -  1. myristic acid, 4. palmitic acid

B. Monounsaturated acids  - 2. oleic acid

C. Polyunsaturated acids -  3. linoleic acid

Answer:

[tex]1.242 \times 10^{25}\text{ atoms H}[/tex]

Explanation:

You must convert the mass of B₄H₁₀ to moles of B₄H₁₀, then to molecules of B₄H₁₀, and finally to atoms of H.

1. Moles of B₄H₁₀

[tex]\text{Moles of B$_{4}$H}_{10} = \text{110.0 g B$_{4}$H}_{10} \times \dfrac{\text{1 mol B$_{4}$H}_{10}}{\text{53.32 g B$_{4}$H}_{10}} = \text{2.063 mol B$_{4}$H}_{10}[/tex]

2. Molecules of B₄H₁₀

[tex]\text{No. of molecules} = \text{2.063 mol B$_{4}$H}_{10} \times \dfrac{6.022 \times 10^{23}\text{ molecules B$_{4}$H}_{10}}{\text{1 mol B$_{4}$H}_{10}}\\\\=1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10}[/tex]

3. Atoms of H

[tex]\text{Atoms of H} = 1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10} \times \dfrac{\text{10 atoms H}}{\text{1 molecule B$_{4}$H}_{10}}\\\\= \mathbf{1.242 \times 10^{25}}\textbf{ atoms H}[/tex]

Explanation:

The spontaneity of a system is deduced by the sign of the gibbs free energy value. If it is negative, it means the process / reaction is spontaneous however a positive value indicates the such process is not spontaneous.

Gibbs free energy, enthalpy and entropy are related by the following equation;

ΔG = ΔH - TΔS

A positive value of enthalpy, H and entropy, S means that G would always be a negative value at all temperatures.

Answer:

5.94×10¯³

Explanation:

The following data were obtained from the question:

Concentration of N2, [N2] = 0.036 M

Concentration of H2, [H2] = 0.15 M

Equilibrium constant (Kc) = 0.29 M

Concentration of NH3, [NH3] =.…?

The equation for the reaction is given below:

N2(g) + 3H2(g) <=> 2NH3(g)

Thus, we can determine the concentration of NH3 by using the equilibrium expression for the reaction.

This is illustrated below:

The equilibrium constant for a reaction is simply defined as the ratio of the concentration of the product raised to their coefficient to the concentration of the reactant raised to their coefficient.

The equilibrium constant for the above equation is given below:

Kc = [NH3]² / [N2] [H2]³

Inputting the value of Kc, [N2], and [H2] the value of [NH3]can be obtained as follow:

Kc = [NH3]² / [N2] [H2]³

0.29 = [NH3]²/ 0.036 × 0.15³

Cross multiply

[NH3]² = 0.29 × 0.036 × 0.15³

[NH3]² = 3.5235×10¯⁵

Take the square root of both side

[NH3] = √(3.5235×10¯⁵)

[NH3] = 5.94×10¯³

Therefore, the concentration of NH3, [NH3] is 5.94×10¯³ M.

Answer:

Major product does not undergo oxidation since it is a tertiary alcohol whereas minor product undergoes oxidation to ketone as it is  secondary alcohol.

Explanation:

Hello,

In this case, given the attached picture, the hydration of the 1 methylcyclohexene yields to alcohols; 1-methylcyclohexan-1-ol and 1-methylcyclohexan-2-ol. Thus, since the OH in the 1-methylcyclohexan-1-ol (major product) is bonded to a tertiary carbon (bonded with other three carbon atoms) it is not able to increase the number of oxygen bonds (oxidation) as it already attained the octet whereas the 1-methylcyclohexan-2-ol (minor product) is able to undergo oxidation to ketone as the carbon bonded to it is secondary (bonded with other two carbon atoms), so one extra bond the oxygen is allowed to be formed to carbonyl.

Best regards.

Answer:

Explanation:

Fe2+ Has 4 unpaired electrons.

By method of elimination;

Option A: Ni2+ has two unpaired electrons. so this option is wrong.

Option B: There are 5 unpaired electrons in the Fe3+ ion. so this option is wrong.

Option C: There are 4 unpaired electrons in the Cr2+ ion. so this option is correct.

Option D: There are 5 unpaired electrons in the Mn2+ ion. so this option is wrong.

Option E: There are 3 unpaired electrons in the Co2+ ion. so this option is wrong.

Answer:

THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C

Explanation:

1604 J of heat is added to 48.9 g of hexane

To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.

Since 1604 J of heat = 48.9 g of hexane

Molar mass of hexane = 86 g/mol = 1 mole

then;

1604 J = 48.9 g

x = 86 g

x = 1604 * 86 / 48.9

x = 4205.4 J

Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.

In other words,

heat = molar heat capacity * temperature change

molar heat capacity = heat/ temperature change

Molar heat capacity = 4205.4 J / 14.5 C

Molar heat capacity = 290.027 J/C

The molar heat capacity of hexane is 290.027 J/ C

Answer:

The two elements with atomic number 9 and 12 are represented by letter Q and R respectively, where Q represents fluorine atom and R represents magnesium atom.

1. Electronic configuration of R that is magnesium (atomic number 12) is:

1s2 2s2 2p6 3s2

2. Q represents fluorine atom, which belongs to group 17 in periodic table that is the most reactive and lightest member of the group.

3. Q and R that is fluorine and magnesium combinely form magnesium fluoride or MgF2.

3 2 1 is the set of quantum numbers.

The set of numbers used to describe the position and energy of the electron in an atom is called quantum numbers. There are four quantum numbers, namely, principal, azimuthal, magnetic, and spin quantum numbers.

The rules for quantum numbers are: (n) can be any positive, nonzero integral value. (l) can be zero or any positive integer but not larger than (n-1). l = 0, 1, 2, 3, 4, …. (n-1) (ml) values follow the equation.

Learn more about quantum numbers here: https://brainly.com/question/24095340

#SPJ2

Answer:

what does little birdie say in the birth of their differences lak lak lak nu pasand aayi baby sleep are no longer children all strong industry all strong baby to show the meaning of rice is here to get up from sleep meaning of lips is Hasan let the mother is saying the baby to sleep in a new

Taking into account the definition of molarity and the molar mass of the compound, the correct answer is option (d): the mass of FeSO₄.7H₂O required for preparation of 125 mL of 0.90 M  solution is 31 g.

In first place, you have to know tha molarity is a measure of the concentration of that substance that indicates the number of moles of solute present in the solution.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution.

[tex]molarity=\frac{number of moles of solute}{volume of solution}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case, you know:

So, by definition of molarity, the number of moles is calculated as:

[tex]0.90 M=\frac{number of moles of solute}{0.125 L}[/tex]

Solving:

number of moles of solute= 0.90 M× 0.125 L

number of moles of solute= 0.1125 moles

On the other side, molar mass is the mass of one mole of a substance, which can be an element or a compound. In this case, the molar mass of FeSO₄.7H₂O is 277.85 [tex]\frac{g}{mole}[/tex].

Then you can apply the following rule of three: if by definition of molar mass, 1 mole of the compound contains 277.85 g, 0.1125 mole contains how much mass?

[tex]mass=\frac{0.1125 moles*277.85 g}{1 mole}[/tex]

Solving:

mass ≅ 31 g

Finally, the correct answer is option (d): the mass of FeSO₄.7H₂O required for preparation of 125 mL of 0.90 M  solution is 31 g.

Learn more about molarity with this example: brainly.com/question/15406534?referrer=searchResults

The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-1. it can not conduct heat and electricity1. it is netiher ductile not malleable3. it is not lsuturous and also not sonorous

Answer:

Non-metals are the elements which form negative ions by accepting or gaining electrons. Non-metals usually have 4, 5, 6 or 7 electrons in their outermost shell. Non-metals are those which lack all the metallic attributes. They are good insulators of heat and electricity. They are mostly gases and sometimes liquid.

Answer:

4.84g of FeO is the theoretical yield

Explanation:

The Iron, Fe(s), reacts with oxygen, O₂(g), producing Iron (II) oxide, as follows:

2Fe(s) + O₂(g) → 2FeO

Theoretical yield is the yield of a reaction in which you assume the 100% of reactants is converted in products.

To find theoretical yield we need to find moles of Iron, and, knowing 2 moles of Fe produce 2 moles of FeO (Ratio 1:1), we can find theoretical yield of FeO as follows:

Moles Fe (Molar mass: 55.845g/mol)

Using the molar mass of the compound we can convert grams to moles, thus:

3.76g Fe × (1mol / 55.845g) = 0.0673 moles of Fe

Moles and mass of FeO

As there are in reaction 0.0673 moles Fe, assuming a theoretical yield (And as ratio of the reaction is 1:1), you will obtain 0.0673 moles of FeO.

Theoretical yield is given in grams, As molar mass of FeO is 71.844g/mol, theoretical yield of the reaction is:

0.0673 moles FeO × (71.844g / mol) =

Answer:

Pb + 2H2O --> PbO2 + 2H2

Explanation:

Products:

Solid metal; PbO2

Hydrogen; H

Reactants:

Metal; Pb

Steam; H2O

Reactants --> Products

Pb + H2O --> PbO2 + H2

Upon balancing we have;

Pb + 2H2O --> PbO2 + 2H2

Answer:

A. mm,cm,m,Km

B. mg, g, Kg

C. mL,L

D. ms, s, min, h

Explanation:

Answer:

Atomic mass is calculated by adding protons and neutrons.

Explanation:

Atomic mass is the sum of protons and neutrons in an atomic nucleus. For example, the element Oxygen has 8 protons (derived from the atomic number) and 8 neutrons (derived from subtracting the amount of protons from the atomic mass).

We can craft an equation to show the relationship between these variables.

M - N = P, where M = Mass, N = Neutrons, and P = Protons

This equation can be rearranged to show the relationship between the neutrons and protons leading to the atomic mass. Simply add N to both sides of the equation.

M = N + P

This shows that atomic mass is equivalent to the sum of protons and neutrons in an atom's nucleus.

Answer:

89%.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

2Li + 2H2O —> 2LiOH + H2

Next, we shall determine the masses of Li and H2O that reacted and the mass of LiOH produced from the balanced equation.

This is illustrated below:

Molar mass of Li = 7 g/mol

Mass of Li from the balanced equation = 2 x 7 = 14 g

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 2 x 18 = 36 g

Molar mass of LiOH = 7 + 16 + 1 = 24 g/mol

Mass of LiOH from the balanced equation = 2 x 24 = 48 g

Summary:

From the balanced equation above,

14 g of Li reacted with 36 g of H2O to produce 48 g of LiOH.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

14 g of Li reacted with 36 g of H2O.

Therefore, 7.4 g of Li will react with = (7.4 x 36)/14 = 19.03 g of H2O.

From the calculation made above, we can see that it will take a higher amount i.e 19.03 g than what was given i.e 10.2 g of H2O to react completely with 7.4 g of Li.

Therefore, H2O is the limiting reactant and Li is the excess reactant.

Next, we shall determine the theoretical yield of LiOH.

In this case we shall use the limiting reactant.

The limiting reactant is H2O and the theoretical yield of LiOH can be obtained as follow:

From the balanced equation above,

36 g of H2O reacted to produce 48 g of LiOH.

Therefore, 10.2 g of H2O will react to produce = (10.2 x 48)/36 = 13.6 g of LiOH.

Therefore, the theoretical yield of LiOH is 13.6 g

Finally, we shall determine the percentage yield of LiOH. This can be obtained as follow:

Actual yield = 12.1 g

Theoretical yield = 13.6 g

Percentage yield =..?

Percentage yield = Actual yield /Theoretical yield x 100

Percentage yield = 12.1/ 13.6 x 100

Percentage yield = 89%

Therefore, the percentage yield LiOH is 89%.

Answer:

848 torr  

Explanation:

The only variables are the pressure and the volume, so we can use Boyle's Law.

p₁V₁ = p₂V₂

Data:

p₁ = 565 torr; V₁ = 24.0 L

p₂ = ?;            V₂ =  16.0 L

Calculations:

[tex]\begin{array}{rcl}p_{1}V_{1} & = & p_{2}V_{2}\\\text{565 torr} \times \text{24.0 L} & = & p_{2} \times \text{16.0 L}\\\text{13 560 torr} & = & 16.0p_{2}\\p_{2} & = & \dfrac{\text{13 560 torr}}{16.0}\\\\& = &\textbf{848 torr}\\\end{array}\\\text{The final pressure of the gas is $\large \boxed{\textbf{848 torr}}$}[/tex]

Answer:

shape

volume

Hope this helps! （づ￣3￣）づ╭❤～

Explanation:

Answer:

C. 0.191 M

Explanation:

Our goal for this question, is to calculate the concentration of the HCl solution. For this, in the experiment, a solution of NaOH was used to find the moles of HCl. Therefore, our first step is to know the reaction between HCl and NaOH:

[tex]HCl~+~NaOH~->~NaCl~+~H_2O[/tex]

The "titrant" in this case is the NaOH solution. If we know the concentration of NaOH (0.100M) and the volume of NaOH (38.2 mL=0.0382 L), we can calculate the moles using the molarity equation:

[tex]M=\frac{mol}{L}[/tex]

[tex]0.100~M=\frac{mol}{0.0382~L}[/tex]

[tex]mol=0.100~M*0.0382~L=0.0382~mol~of~NaOH[/tex]

Now, in the reaction, we have a 1:1 molar ratio between HCl and NaOH (1 mol of HCl is consumed for each mole of NaOH added). Therefore we will have the same amount of moles of HCl in the solution:

[tex]0.0382~mol~of~NaOH\frac{1~mol~HCl}{1~mol~NaOH}=0.0382~mol~HCl[/tex]

If we want to calculate the molarity of the HCl solution we have to divide by the litters of HCl used in the experiment (20 mL= 0.02 L):

[tex]\frac{0.0382~mol~HCl}{0.02~L}~=~0.191~M[/tex]

The concentration of the HCl solution is 0.191 M

I hope it helps!

Answer:

[tex]x_{et}=0.6068[/tex]

Explanation:

Hello,

In this case, since the mole fraction of a compound, in this case ethanol, in a binary mixture, in this constituted by both water and ethanol, is mathematically defined as follows:

[tex]x_{et}=\frac{n_{et}}{n_{et}+n_{w}}[/tex]

Whereas [tex]n[/tex] accounts for the moles in the solution for each species, we must first compute the moles of both ethanol (density: 0.789 g/mL and molar mass: 46.07 g/mol) and water (density: 1g/mL and molar mass: 18.02 g/mol)

[tex]n_{et}=10.00mL\ et*\frac{0.789g\ et}{mL\ et} *\frac{1mol\ et}{46.07g\ et}=0.1713mol\ et\\ \\n_w=2.00mL\ w*\frac{1g\ w}{mL\ w} *\frac{1mol\ w}{18.02g\ w}=0.1110mol\ w[/tex]

Therefore, the mole fraction turns out:

[tex]x_{et}=\frac{0.1713mol}{0.1713mol+0.1110mol}\\\\x_{et}=0.6068[/tex]

Best regards.

Answer:

β particles

Explanation:

The most common radioactive isotope of carbon is C-13.

The unbalanced nuclear equation is

[tex]\rm _{6}^{13}C \longrightarrow \, ? + \, _{7}^{13N}[/tex]

Let's write the question mark as a nuclear symbol.

[tex]\rm _{6}^{13}C} \longrightarrow \, _{Z}^{A}X+ \, _{7}^{13}N[/tex]

The main point to remember in balancing nuclear equations is that the sums of the superscripts and the subscripts must be the same on each side of the equation.  

Then

13 =  A + 13, so A =  13 - 13 = 0, and

6 = Z + 7, so Z  = 6 - 7 = -1

Then, your nuclear equation becomes

[tex]\rm _{6}^{13}C \longrightarrow \, _{-1}^{0}M + \, _{7}^{13}N[/tex]

The particle with "zero" mass and a charge of -1 is an electron, so the balanced nuclear equation is

[tex]\rm _{6}^{13}C \longrightarrow \, _{-1}^{0}e + \, _{7}^{13}N[/tex]

The radiation consists of β particles (electrons)

Answer:

I think think that the one above me is beta radiation

Explanation:

Answer:

3-pentanol

Explanation:

In this case, we have alcohol as the main functional group (OH) with a molecular ion at 88. If the molecular ion is 88 the molar mass is also 88 g/mol therefore the formula for the unknown molecule is [tex]C_5H_1_2O[/tex].

Additionally, if the mass spectrum shows the molecular ion peak we can not have tertiary alcohols (tertiary alcohols often do not show M+ at  all). So, the structures only can be primary and secondary structures.

With this in mind, our options are:

-) 1-pentanol

-) 2-pentanol

-) 3-pentanol

Now we can analyze each structure:

-) 1-pentanol

The structure must explain all the fragments produced (73, 70, and 59). In this primary alcohol, we will have an alpha cleavage (the red bond would be broken). If this has to happen, we will have fragments at 31 and 57. These fragments dont fit with the reported ones, therefore this is not a possible structure (See figure 1).

-) 2-pentanol

On this structure, we will have also an alpha cleavage (red bond). In this rupture we will have fragments at 45 and 43, these m/z values dont fit with the reported ones, therefore this is not a possible structure (See figure 1).

-) 3-pentanol

In this structure, we have the "OH"  bonded to carbon three. So, we can analyze each fragment:

   -) m/z 59

This fragment, can be explained as an alpha cleavage. But, in this case we have two ruptures that can produce the same ion. The carbons on both sides of the C-OH bond.

   -) m/z 71

This fragment, can be explained as a loss of water (M-18) in which we have the production of a carbocation in the carbon where we previously have the C-OH bond.

   -) m/z 73

This fragment, can be explained as a beta cleavage. But, in this case, also we have two ruptures that can produce the same ion. The methyl groups on each end molecule.

See figure 2

I hope it helps!

Answer:

The correct answer is 1.68 × 10⁻⁵ Ci

Explanation:

The activity of the uranium is determined by using the formula,  

R = 0.693 N/t1/2 -------------- (i)

The number of atoms is, N = nNA

Here, NA is the Avogadro number and n is the number of moles. The value of n is m/M, that is, mass/molecular mass. Now the value of N becomes,  

N = (m/M) NA

The m or mass of uranium given is 50.1 grams, and the molecular mass is 238 g/mol, now putting the values we get,  

N = (50 g/238 g) (6.023 × 10²³) = 1.26 × 10²³

The half-life of 238U from year to second is,  

t1/2 = (4.468 × 10⁸ year) (3.16 × 10⁷ s/ 1 year) = 1.412 × 10¹⁶ s

Substituting the values of t1/2 as 1.412 × 10¹⁶, and 1.26 × 10²³ for N in equation (i) we get,  

R = 0.639 (1.26 × 10²³) / 1.412 × 10¹⁶ s  

= 6.18 × 10⁶ Bq (2.7027 × 10⁻¹¹ Ci/1 Bq)

= 1.68 × 10⁻⁵ Ci

Hence, the activity of the plate is 1.68 × 10⁻⁵ Ci

Answer:

14, 508J/K

ΔHrxn =q/n

where q = heat absorbed and n = moles

Explanation:

m = mass of substance (g) = 0.1184g

1 mole of Mg - 24g

n moles - 0.1184g

n = 0.0049 moles.

Also, q = m × c × ΔT

Heat Capacity, C of MgCl2 = 71.09 J/(mol K)

∴ specific heat c of MgCL2 = 71.09/0.0049 (from the formula c = C/n)

= 14, 508 J/K/kg

ΔT=  (final - initial) temp = 38.3 - 27.2

= 11.1 °C.

mass of MgCl2 = 95.211 × 0.1184 = 11.27

⇒ q = 11.27g × 11.1 °C × 14, 508 j/K/kg

= 1,7117.7472 J °C-1 g-1

∴ ΔHrxn = q/n

=1,7117.7472  ÷ 0.1184

= 14, 508J/K

Answer:

H₂O

Explanation:

The empirical formular of the compound is obtained using the following steps;

Step 1: Divide the percentage composition by the atomic mass

Hydrogen = 11.21 / 1 = 11.21

Oxygen = 88.79  / 16 = 5.55

Step 2: Divide by the lowest number

Hydrogen  = 11.21 / 5.55 = 2.02 ≈ 2

Oxygen = 5.55 / 5.55 = 1

This means the ratio of the elements is 2 : 1

The empirical formular (simplest formular of a compound) of the compound is;

H₂O

Answer:Empirical formula ======== H₂O    

Explanation:The empirical formula of a compound shows the whole number ratio for  each atom in a compound.

To find empirical formula. we follow the below steps

The total mass of the compound here  is 100 grams, that is (11.21% of hydrogen + 88.79% of oxygen) we can then  assume 11.21 grams  of hydrogen and 88.79grams of oxygen

                                          Hydrogen                   Oxygen

1.composition by mass    11.21                              88.79

molecular weight              1.007g/mol               15.990g/mol

2.Divide composition by mass  11.21/1.007            88.79/15.99    

by each molecular weight to get 11.13                            5.553

no of moles

3 Divide by the least number of moles

to get atomic ratio                       11.13/5.553          5.553/5.553

                                                         2.004                           1.00

4.Convert  to whole numbers             2                                 1

Empirical formula ======== H₂O    

Answer:

Explanation:

Number of moles of propane:

=Mass in grams ÷ Relative molecular Mass

= 100/((12*3) + (1*8))

= 100 ÷ 44

= 2.2727

Mole ratio propane:carbon (IV) oxide = 1:3(from the equation)

Number of moles of CO2 = 3*2.2727 = 6.8181

Mass in grams = Relative molecular Mass * Number of moles

= 44 * 6.8181

= 299.9964 grams

A number of moles of propane:

Mass in grams ÷ Relative molecular Mass

= 100/((12*3) + (1*8))

= 100 ÷ 44

= 2.2727

Mole ratio propane:carbon (IV) oxide = 1:3(from the equation)

Number of moles of CO2 = 3*2.2727 = 6.8181

Mass in grams = Relative molecular Mass * Number of moles

=44 * 6.8181

= 299.9964 grams

Carbon dioxide is used as a refrigerant, in fireplace extinguishers, for inflating lifestyles rafts and life jackets, blasting coal, foaming rubber and plastics, selling the increased vegetation in greenhouses, and immobilizing animals earlier than slaughter, and in carbonated liquids.

Learn more about Propane at https://brainly.com/question/19883306

#SPJ2

Answer:

C) formaldehyde, H2C=O.

Explanation:

Hello,

In this case, given that the hydrogen bondings are known as partial intermolecular interactions between a lone pair on an electron rich donor atom, particularly oxygen, and the antibonding molecular orbital of a bond between hydrogen and a more electronegative atom or group. Thus, among the options, C) formaldehyde, H2C=O, will exhibit hydrogen bonding since the lone pair of electrons of the oxygen at the carbonyl group, are able to interact with hydrogen (in the form of water).

Best regards.