Answer:
D. the amount of oxygen collected over a period of 12 hours
Explanation:
Photosynthesis is a metabolic reaction performed by the cells of plant. In this reaction, light is used as an energy source to combine carbon dioxide (CO2) and water (H2O) to produce glucose and oxygen gas (O2) as products. In every chemical reaction including photosynthesis, an increase in concentration of reactants will increase the rate of the reaction, which is evident in the amount of products formed.
According to this question where a student is performing an investigation to determine the relationship between a higher than normal concentration of carbon dioxide gas and the rate of photosynthesis. After increasing the concentration of carbon dioxide in water, the student illuminated the plant with a light and collected the bubbles of oxygen gas that were given off from the cut end of the submerged plant.
Based on the above explanation, the best indicator of the rate of photosynthesis in this investigation will be THE AMOUNT OF OXYGEN COLLECTED OVER A PERIOD OF 12 HOURS.
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
4. Calculate the molar mass of Fe2(SO4)3. Then calculate the mass of iron(III) sulfate of 4.05X1023 formula units. Answer: __269g Fe2(SO4)3_
Answer:
399.88 [tex]\frac{4.05*10^{23} }{6.022*10^{23} }[/tex] =269
Explanation:
399.88 is the molar mass of iron(III) sulfate.
The mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
Mass from formula unitsTo calculate the molar mass of Fe2(SO4)3, we need to determine the atomic masses of the individual elements involved and multiply them by their respective subscripts:
Fe: 55.845 g/mol (atomic mass of iron)S: 32.06 g/mol (atomic mass of sulfur)O: 16.00 g/mol (atomic mass of oxygen)Fe2(SO4)3 consists of 2 iron atoms, 3 sulfur atoms, and 12 oxygen atoms:
Molar mass of Fe2(SO4)3 = (2 * 55.845) + (3 * 32.06) + (12 * 16.00) = 159.69 g/mol
To calculate the mass of 4.05 × 10^23 formula units of Fe2(SO4)3, we can use the molar mass:
Mass = (4.05 × 10^23) * (159.69 g/mol) = 6.48 × 10^25 g
Rounded to two decimal places, the mass of 4.05 × [tex]10^{23[/tex] formula units of Fe2(SO4)3 is approximately 6.48 × [tex]10^{25[/tex] grams.
More on formula units can be found here: https://brainly.com/question/33740227
#SPJ6
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
Which statement describes the motion of the sun?
The sun rotates at the same rate throughout.
The sun does not rotate at its poles.
Different parts of the sun rotate at different rates.
The sun does not rotate at its equator.
Answer: Different parts of the sun rotate at different rates.
Explanation:
The statement that best describes the motion of the sun is that different parts of the sun rotate at different rates.
First and foremost, we should note that the rotation of the sun is on its axis and also the sun isn't a solid. Due to this, its motion will be that there'll be rotation of different part of it at different rates. Assuming the sun was solid, then all of its parts will move together.
Answer:
Different parts of the sun rotate at different rates.
Explanation: pic proof
Help Please with this
What is a disadvantage of geothermal energy
Answer:
it runs the risk of triggering earthquakes. releases harmful gases
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
pls answer i need it now!! I will give brainliest to the best answer!!
Answer:
sample 2
Explanation:
hope this helps
Volcanic islands can form over hot spots. The Hawaiian Islands started forming over hot spots in the Pacific Ocean millions of years ago. What process causes the hot, solid rock to rise through the mantle at these locations?
Answer: Convection Currents
Explanation:
Due to the different temperature occurring at the upper and lower layers of the mantle, it causes heat transfer to occur. One of such heat transfer is the Convection currents which causes warmer, less dense rock material in the core to rise through the mantle. Also, the cooler rocks in the higher mantle move slowly towards the core.The movement caused by these Convection current in the Earth are called plate tectonics which are responsible for earthquakes and volcanoes.
How can you ensure the chemical reaction produces the right amount of heat in a hot pack without hurting you?
Answer:
Heat packs that contain iron and water packets: Exposing the solution to air results in the oxidation of the iron (creates rust). The oxidation of the iron is an exothermic process. Heat packs that contain supersaturated sodium acetate: These are reusable, the packs are boiled to dissolve sodium acetate.
Explanation:Thanks for asking question
Chemistry 1 - Types of Radioactive Decay
Answer:
Explanation:
The reaction expression is given as:
⁴⁰₁₈ Ar → X + ⁰₁B
To solve this problem, we must bear in mind that both mass number and atomic number must be conserved.
So;
For the mass number:
40 = A + 0
A = 40
For atomic number:
18 = Z + 1
Z = 18 - 1 = 17
An atom is identifiable by the atomic number. Since the atomic number of X is 17 then it is Cl, chlorine
I neeeeeeeeed help you within 30 min
Answer:
The answers to your question are given below
Explanation:
The equation for the reaction is given below:
2KClO₃ —> 2KCl + 3O₂
The total number of each atoms present in the reactants and products can be obtained by doing a head count as illustrated below:
Reactants >>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 2 × 3 = 6
Products >>>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 3 × 2 = 6
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
Please help me with this question
Thank you!
Answer:
B. 3+
Explanation:
When Fe²⁺ loses an electron, it becomes an Fe³⁺ ion.
The loss of an electron in an atom makes the atom becomes positively charged. Further losing electrons makes the atom more positive.
For the given ion;
Fe²⁺ if it loses an electron more, it becomes Fe³⁺.
The expression is given as:
Fe²⁺ → Fe³⁺ + e⁻
The electrical charge of the nucleus is determined by:
a. the number of neutrons only
b. the number of protons and neutrons together
c. the number of protons only
d. the number of electron only
A breeder reactor is one type of nuclear reactor. In a breeder reactor, uranium-238 is transformed in a series of nuclear reactions into plutonium-239.
The plutonium-239 can undergo fission as shown in the equation below. The X represents a missing product in the equation.
Compare the amount of energy released by completely fissioned plutonium-239 to the amount of energy released by the complete combustion of the same amount of coal.
Answer:hope this help
Explanation:
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
What is formed when polyatomic ions bond with other ions?
It would be Ionic Compounds.
what elements comprise the largest portion of Earth's atmosphere?
Answer:
Nitrogen and Oxygen make up 99% of the Earths atmosphere. Then Argon makes up the rest of the atmosphere.
how do you classify the society on the basis of economy write one characteristic of any two of them
Answer:
Explanation:
(1) The primary industry is mainly agriculture, which includes agricultural, forestry, animal husbandry and fishery components. Agriculture is the foundation of social economy. (2) The secondary industry, which mainly includes the industrial and construction industries.
PLEASEEEE HELPP
If 359 mL of a gas were contracted to only 269 mL, what would be the initial temperature of it if it measured 422 K after the change?
I NEED IT FAST!!
Answer:
T₁ = 563.19 K
Explanation:
Given data:
Initial volume = 359 mL
Final volume = 269 mL
Final temperature = 422 K
Initial temperature = ?
Solution:
The given problem will be solve through the Charles Law.
Charles Law:
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ / V₂
T₁ = 359 mL × 422 K / 269 mL
T₁ = 151498 mL.K / 269 mL
T₁ = 563.19 K
The gas that makes up about 21 percent of the atmosphere is blank
Answer:
oxygen makes up 21 percent of the atmosphere
Differentiate between worldwide conservation and national conservation policy.
the rate of effusion of co2 gas through a porous barrier is observed to be 9.31x 10^-4 mol/h. under the same conditions, the rate of effusion of N2 gas would be _______ mol/h
Answer:
[tex]1.167\times 10^{-3}\ \text{mol/h}[/tex]
Explanation:
[tex]R_1[/tex] = Rate of diffusion of [tex]CO_2[/tex] = [tex]9.31\times 10^{-4}\ \text{mol/h}[/tex]
[tex]R_2[/tex] = Rate of diffusion of [tex]N_2[/tex]
[tex]M_1[/tex] = Molar mass of [tex]CO_2[/tex] = 44.01 g/mol
[tex]M_2[/tex] = Molar mass of [tex]N_2[/tex] = 28.0134 g/mol
From Graham's law we have the relation
[tex]\dfrac{R_1}{R_2}=\sqrt{\dfrac{M_2}{M_1}}\\\Rightarrow R_2=\dfrac{R_1}{\sqrt{\dfrac{M_2}{M_1}}}\\\Rightarrow R_2=\dfrac{9.31\times 10^{-4}}{\sqrt{\dfrac{28.0134}{44.01}}}\\\Rightarrow R_2=1.167\times 10^{-3}\ \text{mol/h}[/tex]
The rate of effusion of the [tex]N_2[/tex] gas would be [tex]1.167\times 10^{-3}\ \text{mol/h}[/tex].
Can someone help
Me out pls if your good at chemistry
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole
Approximately how long does it take for the moon's phases to change from a NEW moon to a FULL moon?
1 week
3 weeks
2 weeks
4 weeks
Answer:
4 weeks
Explanation:
It takes 4 weeks for the cyclle to be happening again
What is the molar mass of carbon?
Is luster a chemical or physical change? (Worth 50 POINTS!)
Answer:
It is a Physical change, have a great day :)
Explanation:
A chemical change is a permanent change. A Physical change affects only physical properties i.e. shape, size, etc. ... Some examples of physical change are freezing of water, melting of wax, boiling of water, etc. A few examples of chemical change are digestion of food, burning of coal, rusting, etc.
