A student prepares four different aqueous NaCl solutions according to the table. Which solution will have the highest molarity?
Answers
Answer:
what did you end up guessing
Explanation:
Related Questions
Using the periodic table, determine the number of PROTONS for the element Li
Answers
Evidence of Earth’s plate tectonic activity is most obvious after an earthquake. Which explanation best describes this plate tectonic movement?
A: Earth’s plates stress one another. However, when an earthquake occurs, plate movement is due to an unbalanced force on the plates.
B: Earth’s plates are moving fast. However, the force of friction slows their movement.
C: The force of gravity causes the floating plates to move up and down. The plate movement sometimes results in earthquakes.
D: Earth’s plates continually place stress on one another. However, the force is balanced during an earthquake.
Answers
Answer:a
Explanation:bc
Plates on Earth are moving quickly. Yet, friction causes them to travel more slowly. So, the correct options are B and C.
What are tectonic plates?Tectonic plates are enormous fragments of the upper mantle and crust of the Earth. They are composed of both continental and oceanic crust. Earthquakes occur around mid-ocean ridges and the large faults which mark the edges of the plates.
The Earth's plates are shifting swiftly. Nevertheless, friction slows their movement. Gravity causes the floating plates to rise and fall. On occasion, the movement of tectonic plates results in earthquakes.
When compared to the Earth's mantle, the plates behave like solid, unyielding shells. The lithosphere is the name given to this thick outer layer.
Thus, the correct options are B and C.
Learn more about Tectonic plates, here:
https://brainly.com/question/30805154
#SPJ3
What does the speaker in the poem mean by the phrase "my heart leaps up"?
A.
He is having a heart attack.
B.
He is exercising.
C.
He feels excited and happy.
D.
His heart continues to beat.
Answers
Answer:
C. He feels excited and happy
Explanation:
Select whether the statement is for Speed, Velocity, or Acceleration.
The car speeds up from 5 mph to 10 mph.
Speed
Acceleration
Velocity
Answers
Answer:
Explanation:
acceleration no cap
How many planets did early astronomers know about?
Answers
Answer:
5 Plants
Explanation:
Also can i have Brainlist
Toma en cuenta los textos para responder estas interrogantes: ¿Consideramos que la aplicación de las medidas de seguridad depende de las características de tu entorno?
Answers
Answer:
Si.
Explicación:
Sí, la aplicación de medidas de seguridad depende de las características de su entorno porque el entorno nos brinda para elegir las medidas de seguridad. Existen diferentes instrumentos utilizados para la seguridad de diferentes entornos. Algunas medidas de seguridad se aplican en un entorno mientras que el otro se aplica a otro entorno. Por ejemplo, el vallado es una medida de seguridad que se puede aplicar en el terreno pero no en el agua o cualquier zona fangosa, por lo que podemos decir que las características físicas deciden qué medida de seguridad se debe instalar en el entorno.
How many atoms of carbon are in diamond
Answers
Answer:
A diamond contains 5.0 x 10 21 atoms of carbon.
In any engineering design problem, the first step is to understand the problem and identify one or more possible solutions. In this task, you’ll analyze the problems you face as the chemical engineer challenged with setting up the ammonia-making process. Recall the chemical equation for producing ammonia:
N2 + 3H2 ⇌ 2NH3 + energy
2.How can you change the chemical equilibrium to benefit the company? What benefits will be realized?
Answers
Answer:
Explanation:
2NH3(g)(→ N2(g)(+(3H2(g)
Eventually, these two reactions occur at the same rate. When this happens,
the concentrations of nitrogen, hydrogen, and ammonia become constant, and the
system is said to be “at equilibrium”. Typically,
we represent chemical equilibrium
using a double-headed reaction arrow:
I know the answer out here are points for you! It’s 3 if anyone needs the answer !
Answers
Answer:
lol thanks for the 10
Explanation:
If the prescribed dosage of milk of magnesia Mg(OH)2 is 3.5 moles, how many grams
would you need to take? Round to the nearest tenth (one digit after the decimal).
A. 92.1 g
B. 204.2g
C. 157.2 g
D. None of the above
Answers
Answer:
B
Explanation:
1 mole is equal to 58.31968 grams.
so 3.5 moles equal to answer choice B
Zach invited his friend Sydney to a pool party over the weekend. Sydney informed Zach that the climate was supposed to be rainy over the weekend and suggested that he change his plans. Zach explained to Sydney that she had misused the word “climate” and she should have used the word “weather” instead. Which of the following statements accurately clarifies the confusion between Zach and Sydney?
A). Zach is correct; the weather for this area is typically tropical and wet.
B). Sydney is correct; there has been an abundance of rainfall within the last month, changing the climate of this particular area.
C). Zach is correct; the climate of an environment is determined by patterns in weather conditions over an extended period of time.
D). Sydney is correct; the climate of an environment can change constantly based on weather, wind, and front patterns in the area.
Answers
Answer:
C
Explanation:
Common sense
Some vitamins and dietary supplements are stored in opaque, darkened
bottles to protect them from UV light because UV light would cause a
reaction. Which word could be used to describe UV light in this situation?
O A. Catalyst
B. Enzyme
C. Solvent
D. Reactant
Answers
because it is and it’s cool
The correct option for the given question about Harmfull effect of UV light is Option D) Reactant.
Why UV light is so harmfull for some vitamins?In general, temperature, oxygen, and light impacts on vitamins and minerals are sensitive. A nutrient can lose its biological potency if its molecular structure is slightly altered.Numerous vitamins, including vitamin A, vitamin B2 (riboflavin), vitamin B6, vitamin B12, and folic acid, are known to be particularly susceptible to UV radiation oxidation.Additionally, light speeds up the negative interactions between vitamins.For instance, the combination of riboflavin and light together speeds up the breakdown of both folic acid and vitamin C. This is what causes milk that has been exposed to light to lose vitamin C.Thus to conclude we can say that UV light damages some vitamins by reacting with them.
Learn more about Harmfull effect of UV light here:
https://brainly.com/question/11126315
#SPJ2
TRUE OR FALSE
All of the elements on Earth, except for hydrogen, were formed in the interiors of stars.
Answers
Answer:
True
Explanation:
I checked several websites to double check for you.
Answer:
Except for hydrogen and some helium created in the Big Bang, all of the stuff we, and the Earth around us, are made of, was generated in stars, through sustained fusion or in supernova explosions i thank its true :) hope this helps
Why do you think we use heat to dissolve sodium tetraborate?
Answers
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
How do you name branched-chain alkanes?
Answers
Answer:
Explanation:
Branches or side chains are called alkyl radicals, they are named substituting the termination -ano for -yl or -il when it is part of a hydrocarbon.
Two reactant particles collide with proper orientation. The collision will be effective if the particles have
(A) sufficient potential energy
(B) high activation energy
(C) high ionization energy
(D) sufficient kinetic energy
And explain why, and answer in brainly
Answers
The collision will be effective if the particles have sufficient kinetic energy (Option D).
Kinetic energy is motion energy, conversely to potential energy.Kinetic energy is required to produce the collision between particles.The more kinetic energy the particles have, then the more collision will occur, thereby it increases the rate of a chemical reaction.In conclusion, the collision will be effective if the particles have sufficient kinetic energy (Option D).
Learn more in:
https://brainly.com/question/25959744
I have 130 L of gas in a piston at a temperature of 250°C. If I cool the gas
until the volume decreases to 85 L, what will the temperature of the gas be?
Answers
This is a Charles' Law problem: V1/T1 = V2/T2. As the temperature of a fixed mass of gas decreases at a constant pressure, the volume of the gas should also decrease proportionally. Here, we are given the new volume of the gas after cooling, and we want to determine to what temperature the gas was cooled.
To use Charles' Law, the temperature must be in Kelvin (x °C = x + 273.15 K). We want to solve Charles' Law for T2, which we can obtain by rearranging the equation into T2 = V2T1/V1. Given V1 = 130 L, T1 = 250 °C (523.15 K), and V2 = 85 L:
T2 = (85 L)(523.15 K)/(130 L) = 342 K or 68.9 °C. If sig figs are to be considered, since all the values in the question are given to two sig figs, the answer to two sig figs would be either 340 K or 69 °C.
Gases show great uniformity in their behaviour irrespective of their nature. The concept Charles's law is used here to determine the new temperature of the gas. The new temperature of the gas is 341.96 K.
What is Charles's law?At constant pressure, the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. The absolute scale of temperature is introduced by the scientist Charles. The temperature at which gases supposed to have zero volume is called the absolute temperature.
Mathematically the Charles's law can be expressed as:
V = constant × T
V / T = constant
For two different gases, the equation is:
V₁ / T₁ = V₂ / T₂
T₂ = V₂T₁ / V₁
85 × 523 / 130 = 341.96 K
Thus the new temperature of the gas is 341.96 K.
To know more about Charles's law, visit;
https://brainly.com/question/16927784
#SPJ2
8.2 moles of ethanol is boiled, how much energy was required to do so?
AH fus=4.60 kJ/mol
AHvap=43.5 kJ/mol
Answers
Answer:
Explanation:
Understand that a substance's specific heat (C) is a property that can be used to ... Calculate the heat required to melt 25.7 g of solid methanol at its melting point. ... How many moles of NH4NO3 must be dissolved in water so that 88.0 kJ of heat ... to vaporize 54.0 g of ethanol (C2H5OH) if AHvap for ethanol = 43.5. kJ/mol?
Q. Explain why magnesium
oxide has a much higher
melting point than
sodium chloride.
If you answer this correctly ill mark you as brainliest.
Answers
Answer:
Why does Magnesium Oxide have a higher melting point than Sodium Chloride? ... As the charge in the ionic lattice in Magnesium Oxide is two times as large, the ionic bonding is stronger so more energy is required to overcome the electrostatic attraction and break down the ionic lattice.
HI thts way tooo much to answer but ye.
What is the role of the green substance chlorophyll in photosynthesis? (2 points)
Chlorophyll collects water from the ground.
Chlorophyll captures energy from the sun.
Chlorophyll captures carbon dioxide from the air.
Chlorophyll moves water up the stem to the leaves.
Answers
Answer:
captures energy from the sun
Explanation:
Answer:
☁️Chlorophyll captures energy from the sun. ☁️
Calculate the volume which 1.00 mole of a gas occupies at 1 atm and 298K?
Answers
Answer:
25.45 Liters
Explanation:
Using Ideal Gas Law PV = nRT => V = nRT/P
V = (1mole)(0.08206Latm/molK)(298K)/(1atm) = 25.45 Liters
How many atoms does 9.3 moles of Mo represent?
Answers
Answer:
5.60 × 10²⁴ Mo atomsExplanation:
The number of atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
N = 9.3 × 6.02 × 10²³
We have the final answer as
5.60 × 10²⁴ Mo atomsHope this helps you
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answers
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
If you have a cup of water at 35 degrees Celsius, and a bath tub of water at 35 degrees Celsius which will melt the most ice and why?
Answers
______ is the tendency of an organism to maintain a constant and stable internal environment
Answers
Answer:
Homeostasis is the answer
Explanation: it maintains a constant and stable environment
50 POINTS
Gizmos Moles Activity - chemistry
can someone please help me out
Answers
there is how I would answer it.
Is my sister bad or good.
Answers
Answer:
decent
Explanation:
Which of the following is not a force
A. Weight
B. Friction
C. Acceleration
D. Air resistance
Answers
Answer:
Acceleration
Explanation:
Acceleration doesn't change one moment to the next, and therefore, doesn't count as a force.
The answer option which is not a force is: C. Acceleration.
What is a force?A force can be defined as a push or pull of an object or physical body, which typically results in a change of motion (acceleration), especially due to the interaction of the object with another.
The examples of a force.In Science, the three (3) most common examples of a force include the following:
WeightFrictionAir resistanceIn conclusion, acceleration is not an example of a force but a change in the rate of velocity of an object with respect to time.
Read more on force here: brainly.com/question/1121817
whoever helps me will get brainlist
Answers
Answer:
Show us the arrows, how are we suppose to answer?
Explanation:
A piece of metal is composed of atoms. Each atom in the metal contains 29 protons. How is the metal classified?
Answers
Answer:
Explanation:
The metal is classified as a transition metal or transition element. In particular, this atom is Copper it has an atomic number of 29 which we know by the number of protons. The number of protons in an atom is the same as the atomic number.
Answer:
Copper
Explanation:
Each atom in the metal contains 29 protons.
