a system absorbs 500J of heat and at the same time 400J of work is done on the system what is change in internal energy​

Answer:

a because it is at a given moment

Explanation:

did u

Answer:

Work done by the bullet is 612.26 J.

Explanation:

mass of bullet, m = 0.5 kg

initial velocity of bullet, u = 50 m/s

coefficient of friction = 0.2

mass of block, M = 3 kg

let the final speed of the bullet block system is v.

use conservation of momentum

Momentum of bullet + momentum of block = momentum of bullet block system

0.5 x 50 + 3 x 0 = (3 + 0.5) v

v = 7.14 m/s

let the stopping distance is

The work done is given by change in kinetic energy of bullet

initial kinetic energy of bullet, K =  0.5 x 0.5 x 50 x 50 = 625 J

Final kinetic energy of bullet, K' = 0.5 x 0.5 x 7.14 x 7.14 = 12.74 J

So, the work done by the bullet

W = 625 - 12.74 = 612.26 J  

Answer:

Option b, cosine.

Explanation:

Below you can see an image that illustrates this situation.

Remember that for a triangle rectangle with a given angle θ, we have:

Cos(θ) = (adjacent cathetus)/(hypotenuse)

In the image, you can see a vector of magnitude M, and the angle θ defined between the vector and the positive y-axis.

In this case, the y-component is the adjacent cathetus and the hypotenuse is the magnitude of the vector.

Then we will have:

Cos(θ) = (adjacent cathetus)/(hypotenuse) = y/M

solving that for y, we get:

y = Cos(θ)*M

Then the y-component is the vector's magnitude multiplied by the cosine of the angle between the vector and the y-axis.

The correct option is b.

Answer:

(b) cosine

Explanation:

In a 2-dimensional Cartesian coordinate system, a vector has a x-component and/or a y-component. To get these components, the magnitude of the vector is resolved with respect to the x-axis and the y-axis by multiplying it (the magnitude) by some trigonometric function with respect to the angle between the vector and the x or y axis.

For example, given a vector A of magnitude A which makes an angle α with the x-axis and an angle β with the y-axis, the x and y components of the vector A can be found as follows;

i. x-component is given by [tex]A_{x}[/tex]

[tex]A_{x}[/tex] = A cos α (with respect to the angle between A and the x-axis)  or

[tex]A_{x}[/tex] = A sin β (with respect to the angle between A and the y-axis)

ii. y-component is given by [tex]A_{y}[/tex]

[tex]A_{y}[/tex] = A sin α (with respect to the angle between A and the x-axis)  or

[tex]A_{y}[/tex] = A cos β (with respect to the angle between A and the y-axis)

Therefore, the y-component of a vector in a 2-dimensional Cartesian coordinate is given by the product of the magnitude of the vector and the cosine of the angle between the vector and the y-axis.

Answer:

A homogeneous mixture is a type of mixture in which the composition is uniform and every part of the solution has the same properties. Example, air

Explanation:

1517.4 m

Step-by-step explanation:

Since the projectile broke up at the peak of its flight, it already traveled half its initial range so we can find its initial launch velocity [tex]v_0[/tex] from the equation

[tex]\frac{1}{2}R= \dfrac{1}{2} \left(\dfrac{v_0^2}{g}\sin 2\theta_0 \right)[/tex]

where [tex]\theta_0 = 45°[/tex] and [tex]\frac{1}{2}R = 50\:\text{m}[/tex] so we will get [tex]v_0=31.3\:\text{m/s}[/tex]. Next, we can use the equation

[tex]v_y = v_0y - gt = v_0 \sin 45 - gt[/tex]

and since [tex]v_y=0[/tex] at its peak, we get t = 22.1 s. Let's set this aside for a moment and we'll use it later.

At the top of its peak, we can use the conservation law of linear momentum. Let M be the mass if of the original projectile, [tex]m_1[/tex] be the mass of the larger fragment (2 kg) and [tex]m_2[/tex] be the mass of the smaller fragment (1 kg). We can write the conservation law as

[tex]Mv_0x = m_1V_1 + m_2V_2[/tex]

where [tex]V_1\:\text{and}\:V_2[/tex] are the velocities of the fragments immediately after the break up. But we also know that [tex]V_1=0[/tex] so the velocity of [tex]m_2[/tex] can be calculated from the conservation law as

[tex]Mv_0 \cos 45° = m_2V_2[/tex]

or

[tex]V_2 = \dfrac{M}{m_2}v_0 \cos 45° = 66.4\:\text{m/s}[/tex]

Now we can calculate the horizontal distance the smaller fragment traveled after the break up. Recall that the amount of time for it to go up is also the amount of time to get down so the horizontal distance x is

[tex]x = V_2 t = (66.4\:\text{m/s})(22.1\:\text{s})= 1467.4\:\text{m}[/tex]

Therefore, the total distance traveled from the launch point is

[tex]D = 50\:\text{m} + 1467.4\:\text{m}=1517.4\:\text{m}[/tex]

Answer:

Yes it will move and a= 4.19m/s^2

Explanation:

In order for the box to move it needs to overcome the maximum static friction force

Max Static Friction = μFn(normal force)

plug in givens

Max Static friction = 31.9226

Since 36.6>31.9226, the box will move

Mass= Wieght/g which is 45.8/9.8= 4.67kg

Fnet = Fapp-Fk

= 36.6-16.9918

=19.6082

=ma

Solve for a=4.19m/s^2

Answer:

Sentences with many clauses and phrases are difficult to understand because the clauses and phrases typically _____.

modify other clauses and phrases in the sentence

refer to other sentences in the passage

make it hard to determine where the sentence ends

change the intended meaning of the sentence

Explanation:

The third choice is the correct explanation. Don't make me type it all out on my phone.

Answer:

The heat source for our planet is the sun. Energy from the sun is transferred through space and through the earth's atmosphere to the earth's surface. Since this energy warms the earth's surface and atmosphere, some of it is or becomes heat energy.

Answer:

below

Explanation:

Answer:

The right solution is:

(a) 2.87 eV

(b) 1.4375 eV

Explanation:

Given:

Wavelength,

= 433 nm

Potential difference,

= 1.43 V

Now,

(a)

The energy of photon will be:

E = [tex]\frac{6.626\times 10^{-34}\times 3\times 10^8}{433\times 10^{-9}}[/tex]

  = [tex]4.59\times 10^{-19} \ J[/tex]

or,

  = [tex]\frac{4.59\times 10^{-19}}{1.6\times 10^{-19}}[/tex]

  = [tex]2.87 \ eV[/tex]

(b)

As we know,

⇒ [tex]Vq=\frac{hc}{\lambda}-\Phi_0[/tex]

By substituting the values, we get

⇒ [tex]1.43\times 1.6\times 10^{19}=\frac{6.626\times 10^{-34}\times 3\times 10^8}{433\times 10^{-9}}-\Phi_0[/tex]

⇒                       [tex]\Phi_0=2.3\times 10^{-19} \ J[/tex]

or,

⇒                            [tex]=\frac{2.3\times 10^{-19}}{1.6\times 10^{-19}}[/tex]

⇒                            [tex]=1.4375 \ eV[/tex]

Answer: Why am I growing is a chemical change.

Explanation:

Changes that can be reversed and does not affect the composition of a substance are called physical changes.

For example, change in state of a substance like ice converting into water is a physical change.

Changes that cannot be reversed and affect the chemical composition of a substance are called chemical changes.

For example, a child growing is an irreversible change and hence, it is a chemical change.

Thus, we can conclude that why am I growing is a chemical change.

Answer:

(a) Positive

(b) Electron gains energy as it moves from A to B.

Explanation:

VA = 260 V

VB = 210 V

An electron moves from lower to higher potential which is negatively charged and a positively charged particle moves  from higher to lower potential, so the charge particle is positive in nature.

(a) Positive

(b) No, electron gains energy as it moves from A to B.

Answer:

The induced current is counter clockwise if the current is decreasing and towards right.

Explanation:

When the current is decreasing in the wire, the direction of magnetic field at the center of the loop is outwards to the plane of paper which is given by the Maxwell's right hand thumb rule. The magnetic field is decreasing in nature.

So according to the Lenz's law, the induced current is such that which opposes the cause of its production, so that the induced current is counter clockwise.

Answer:

D) all of the above.

Explanation:

First polarises it, cahrging and discharging occurs at once.

A negatively charged balloon touching a wooden wall then from the given options option D is correct which is all of the above.

Charged matter experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. Positive or negative charges can exist in an electric field (commonly carried by protons and electrons, respectively).

Contrary charges attract one another, while like charges repel one another. A neutral object is one that carries no net charge. Classical electrodynamics, the name given to an early understanding of how charged particles interact, is still accurate for issues that do not call for taking into account quantum phenomena.

In the first step it polarizes molecules in the wall, then charging and discharging in the wall will take place at once.

To get more information about Charge :

https://brainly.com/question/19886264

#SPJ2

Answer:

B = 4.51×10⁻⁵ T

Explanation:

Given that,

The average magnetic field strength of the Earth is 0.0000451 T.

We need to write the value in the form of scientific notation. Any number in scientific notation is written as follows :

N=a×bⁿ

Where

n is any integer and a is a real no

So,

0.0000451 = 4.51×10⁻⁵ T

So, the required answer is equal to 4.51×10⁻⁵ T.

Answer:

jsgssbvwsvs

Explanation:

ifmd understand

Answer:

I guess it is A. I am not sure

The voltage across the element is = 240 V

I hope you understand....

Mark me as brainliest....

Thanks...

Answer:

Option (b) is correct.

Explanation:

The amount of heat required to raise the temperature of substance of mass 1 kg by 1 degree C, is called specific heat of the substance.

The formula of the specific heat is

H = m c (T' - T)

where, m is the mass, c is the specific heat and T' - T is the change in temperature.

So, to know the rise in temperature, by adding the known amount of heat, the specific heat is required.

So, option (b) is correct.

Answer:

Thus, [tex]\frac{1 rev}{min} =\frac{2\pi}{60} rad/s[/tex]

Explanation:

The angular speed is defined as the rate of change of angular velocity.

Its SI unit is rad/s and other units are rev/min or rev/s.

[tex]\frac{1 rev}{min } = \frac{1 rev}{60 sec}\\\\1 rev = 2\pi rad\\\\So\\\\\frac{1 rev}{min} = \frac{2\pi}{60} rad/s[/tex]

Explanation:

The initial kinetic energy [tex]KE_0[/tex] for both blocks is zero. Let [tex]m_1= m[/tex] and [tex]m_2 =3m[/tex]. So using the conservation law of linear momentum, we can write

[tex]0 = m_1v_1 - m_2v_2[/tex]

or

[tex]v_2 = \dfrac{m_1}{m_2}v_1 = \dfrac{m}{3m}v_1 = \dfrac{1}{3}v_1[/tex]

The final kinetic energies for the two masses are

[tex]KE_1 = \frac{1}{2}m_1v_1^2 = \frac{1}{2}mv_1^2[/tex]

[tex]KE_2 = \frac{1}{2}m_2v_2^2 = \frac{1}{2}(3m)(\frac{1}{3}v_1)^2 = \frac{1}{2}m(\frac{1}{3}v_1^2)[/tex]

Therefore, the ratio of their kinetic energies is

[tex]\dfrac{\Delta KE_2}{\Delta KE_1} = \dfrac{\frac{1}{2}(\frac{1}{3}v_1^2)}{\frac{1}{2}v_1^2} = \dfrac{1}{3}[/tex]

Answer:

Changes in climate conditions, especially the warming of global temperatures increases the likelihood of weather-related natural disasters. ... This is most visible when seen through changes in the intensity and frequency of droughts, storms, floods, extreme temperatures and wildfires.

Explanation:

Given that,

The radius of rain drop, r = 0.12 cm = 0.0012 m

The viscocity of air is, [tex]\eta=18\times 10^{-5}\ poise[/tex]

Let the viscous force is, [tex]F = 0.010173\ N[/tex]

The viscous force is given by :

[tex]F=6\pi \eta rv\\\\v=\dfrac{F}{6\pi \eta r}[/tex]

Put all the values,

[tex]v=\dfrac{0.010173}{6\pi 18\times 10^{-5}\times 0.0012 }\\\\v=2498.58\ m/s[/tex]

[tex]4.8 \times 10^8[/tex] volts

Explanation:

The electric potential due to a point charge is given by

[tex]V= \dfrac{1}{4 \pi \varepsilon_{0}} \dfrac{Q}{r}[/tex]

where Q = charge = [tex]16 \times 10^{-9}[/tex] C

r = distance from a point = [tex]3 \times 10^{-3}[/tex] m

[tex]\varepsilon_{0}[/tex] = permitivity of free space

= 8.85×10^-12 C^2/N-m^2

Plugging in the numbers,

[tex]V = \dfrac{1}{4 \pi (8.85 \times 10^{-12})} \dfrac{16 \times 10{-9}}{3 \times 10^{-3}}[/tex]

[tex]= 4.8 \times 10^8[/tex] volts

Answer:

Distance

Explanation:

Work can be defined as the energy transferred to a physical object by exertion of a force on the object to cause a displacement of the object. Thus, work is typically done when a person or simple machine move an object over a distance through the application of a force.

Mathematically, work done is given by the formula;

[tex] W = F * d[/tex]

Where,

W is the work done

F represents the force acting on a body.

d represents the distance covered by the body.

A dependent variable is the event expected to change when an independent variable is manipulated.

Hence, distance is the dependent variable because its value changes with respect to the amount of force exerted on an object.

Answer:

30 kilometers is a reasonable measurement

Answer:

P = 1.4 W

Explanation:

Given that,

The work done or the energy of the battery, E = 10,000 J

Time, t = 2 h

We need to find the power consumption. Let it is P. Power is the rate of doing work. So,

[tex]P=\dfrac{W}{t}\\\\P=\dfrac{10,000}{2\times 3600}\\\\P=1.38\ W[/tex]

or

P = 1.4 W

So, the power of the battery is 1.4 W.