a tank at is filled with of carbon dioxide gas and of dinitrogen difluoride gas. you can assume both gases behave as ideal gases under these conditions. calculate the mole fraction and partial pressure of each gas, and the total pressure in the tank. round each of your answers to significant digits

Which type of arrangement of atoms could a molecule with five covalent bond (and any percentage of lone pairs) have? Trigonal bipyramidal, square pyramidal

A cell is the smallest unit of a material that retains its composition and properties. It is made up of 2 or more atoms that are joined together by covalent bond. Chemistry is built on molecules. The element sign and a suffix indicating the number of ions are used to identify molecules. A molecule is the smallest unit of any material that is composed of one or more elements and is capable of existing independently while maintaining all of the substance's physical and chemical properties. Further atom division occurs within molecules. For instance, the symbols for the oxygen atom and molecule are O and O2, respectively.

Learn more about molecules here:

https://brainly.com/question/19922822

#SPJ4

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, the total enthalpy of the given reaction is -781.44KJ.

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.

Mathematically,

q = n ×ΔH

where

q = amount of heat

n = no of moles

ΔH = enthalpy

n = w / M.M

w = given mass

M.M = molar mass

4CH[tex]_3[/tex]NH[tex]_2[/tex]+2H[tex]_2[/tex]O[tex]\rightarrow[/tex]3CH[tex]_4[/tex]+CO[tex]_2[/tex]+4NH[tex]_3[/tex]   ΔH=-138.8KJ

number of moles of methyl amine=175/31.06

                                                       =5.63moles

enthalpy for reaction of one mole of methyl amine=-138.8KJ

enthalpy for reaction of 5.63 mole of methyl amine=-138.8KJ×5.63

                                                                                     =-781.44KJ

Therefore, the total enthalpy of the given reaction is -781.44KJ.

To know more about enthalpy, here:

brainly.com/question/24170335

#SPJ1

The electronic configuration is also used to explain the orbitals of an atom and it helps to determine the physical and chemical properties of the elements. Here the electronic configuration of chromium is 1s²2s²2p⁶3s²3p⁶4s¹3d⁵.

The distribution of electrons in the atomic orbitals is given by the electronic configuration. It is a standard notation in which all the electrons holding atomic subshells are arranged in a sequence. Each element has a unique electronic configuration.

The electronic configuration of an element can be written in two ways, in standard notation, and in condensed form. In the case of elements with larger atomic numbers, the electronic configuration becomes lengthy in standard notation. So in such cases condensed form is generally used.

In condensed form, Cr: [Ar] 3d⁵4s¹

There are six unpaired electrons in [Cr(H₂O)₆]³⁺ and it is a paramagnetic complex.

To know more about electronic configuration, visit;

https://brainly.com/question/30161188

#SPJ2

Answer:

Avogadro's number

Explanation:

The sodium is oxidized while the chlorine atom is reduced from the equation.

We know that a redox reaction is the kind of reaction that involves the change in the oxidation number of a substance. The oxidation number is the magnitude of the charge that a specie appears to have. In this case, we can see that the reaction that has been shown here has to do with a change in the oxidation number of the species that are involved in the reaction from left to right.

We can see that on the right hand side, the sodium and chlorine are both in an oxidation state of zero. If we move to the right hand side, the oxidation number of the sodium can be seen to haver increased to +1 while the oxidation n umber of the chlorine can be seen to have been decreased to - 1.

Learn more about redox reaction:https://brainly.com/question/13293425

#SPJ1

Choloracetic acid, 12 g. The colorless solution of the white crystalline substance known as chloroacetic acid.

Up to 80% of the solution can be acidic. By inhalation, ingestion, and skin contact, it is poisonous. It corrodes flesh and metals.

The equilibrium of the buffer is

CH2ClCO2 + H+ HCH2ClCO2

PKA = Log Ka

Ka: [CH2ClCO2] = 1,3 x 103. "H+" / "HCH2ClCO2"

Using the Henderson-Hasselbalch formula:

pH equals pka plus log10 [A]/[HA].

2,89 + log10 [A] / [HA] = 3,01

1,318 = [A⁻] / [HA]

Since chloroacetic acid (HA) has a molar concentration of 0,20M

[A⁻] = 0,26 mol/L

There are 500 mL plus 0.5 L.

Chloroacetic acid is equal to 0,26 mol/L x 0,5 l, or 0,13 moles. By weight:

Choloracetic acid is equal to 0,13 mol (94,5g / 1mol) = 12 g.

Learn more about concentration here-

https://brainly.com/question/10725862

#SPJ4

The energy required to bring 120 g of acetic acid (HCH3CO2) to a boil at a starting temperature of 16.7 °C is 72.2116 kJ.

Given that ;

mass of acetic acid = 120.0 g

initial temperatureT₁  = 16.7 °C  = (16.7 + 273.15 ) K = 298.85 K

standard molar mass of acetic acid = 60.052  g/mol

The number of moles of acetic acid can therefore be calculated as follows: number of moles of acetic acid = mass of acetic acid/molar mass of acetic acid

number of moles of acetic acid = 120.0 g/ 60.052 g/mol

number of moles of acetic acid =  1.998 moles

For acetic acid:

standard boiling point T₂  = 118.1 °C = ( 118.1 + 273.15 ) K = 391.25 K

enthalpy of vaporization of acetic acid ΔH[tex]_{vap}[/tex]  = 23.7 kJ/mol

heat capacity of acetic acid  c = 2.043  J/g.K

change in temperature Δ T =  T₂ - T₁

Δ T = (391.25 - 289.85)K

Δ T = 101.4 K

The heat required to raise the liquid acetic acid's temperature from 16.7°C to its boiling point is;

q = mcΔT

From our values above;

q = 120 g ×  2.043  J/g.K × 101.4 K

q = 24859.2  J

q = 24859 /1000 kJ

q = 24.859 kJ

We already determined that we have 1.998 moles of acetic acid;

Thus;

the needed amount of heat = Δ[tex]_{vap}[/tex]*number of moles

The needed amount of heat = 47.3526 kJ

Hence;

The total amount of heat needed = 24.859 kJ + 47.3526 kJ

The total amount of heat needed = 72.2116  kJ

Learn more about acetic acid here:

https://brainly.com/question/24194581

#SPJ4

a) NaFi is formed when 1 mol of NaOH is oriented to 1.0 L of a 0.5 M HF mixture.

b) To 1.0 L of a solution that is 0.8 M in both HF & KF-producing KF, 0.3 mol of KOH is added.

An acid generates the hydronium ions H3O+ in an aqueous solution, whereas a base creates the hydroxide ions OH. Water and salt are the byproducts of the neutralization process that occurs when an acid and a base interact.

A) 1 mol of NaOH is counted to 1.0 L of a 0.5 M HF resolution.

The reaction involved in this is:

NaOH + HF → NaF + H2O

acid: HF

base: NaOH

species that neither creates an acid and neither a base nor a salt NaF

b) To 1.0 L of a mixture that seems to be 0.8 M in both HF as well as KF, 0.3 mol of KOH is added.

The reaction involved in this is:

KOH + HF → KF + H2O

acid: HF

base: KOH

the mixture that could be neither an acid nor a base or salt delivered: KF

Learn more about the chemical reaction at

https://brainly.com/question/15357495?referrer=searchResults

#SPJ4

The question is -

The preparations of two aqueous solutions are described below. For each solution, write the chemical formulas of the major species present at equilibrium. You can leave out water itself.

For each of the questions, write the chemical formulas of the species that will act as acids, the formulas of the species that will act as bases, and the formulas of the species that will act as neither acids nor bases. Note that HF is a weak acid.

A) 1 mol of NaOH is added to 1.0 L of a 0.5 M HF solution.

B) 0.3 mol of KOH is added to 1.0 L of a solution that is 0.8 M in both HF and KF.

Alkynes are hydrocarbons containing a carbon-carbon triple bond. Their general formula is CnH2n-2 for molecules with triple bonds.

Alkynes undergo many of the same reactions as alkenes but can react twice due to the presence of two p-bonds on the triple bond. Ethyne is commonly known by the trivial name acetylene. It is the simplest alkyne, consisting of two carbon atoms joined by a triple bond, where each carbon can bond to a hydrogen atom.

Molecules containing a triple bond between two carbon atoms are called alkynes. A triple bond consists of one σ bond and two π bonds. As for the hydrogen atoms, this compound is unsaturated, so the extra electrons are exchanged with two carbon atoms forming a double bond.

Learn more about An alkyne here:- https://brainly.com/question/6839022

#SPJ4

Since CH3CH2CH2NH2 may form intermolecular hydrogen bonds, it has a higher boiling point than other compounds. The hydrogen atoms in (CH3)3N (C H 3) 3 N are joined to the carbon atoms.

Since carbon is not a particularly electronegative atom, it cannot donate hydrogen. There aren't any hydrogen atoms to accept, despite the fact that nitrogen is a strong hydrogen atoms. As a result, CH3CH2CH2CH3 is a nonpolar molecular complex in which induced dipole forces are the only intermolecular forces. When both the donor atom, D, and the acceptor atom, A, are among the highly electronegative elements O, N, or F, hydrogen bonding occurs, as shown by the symbol D-H—-A.

To learn more about hydrogen bonds, click here.

https://brainly.com/question/15099999

#SPJ4

the overall balanced cell reaction for the following voltaic cell

Hg2Cl2(s) + Cu(s) ® 2Hg(l) + Cu2+(aq) + 2Cl-(aq)

The cell reaction, also known as the total reaction, is the reaction that occurs within the cell as a whole and is expressed under the assumption that the right electrode is the cathode and that the spontaneous reaction is the one in which reduction takes place in the right-hand compartment.Galvanic, also known as Voltaic, and electrolytic cells are the two varieties of electrochemical cells. While electrolytic cells utilize non-spontaneous reactions and therefore need an external electron source, such as a DC battery or an AC power source, galvanic cells get their energy from spontaneous redox reactions.

Learn more about cell reaction here:

https://brainly.com/question/995105

#SPJ4

The diagrams of zonation in lakes and oceans with correct targets are :

a) fresh plant may be rooted here

b) littoral zone

c) limnetic zone

d) alternately dry and submerged

e) extends to edge of the continental shelf

f) generally low nutrient levels

g) light penetrates here

h) no photosynthesis occurs here

i) benthic zone

There are zones which divided the lakes. they are separated by the water from the top to bottom and the side to the side. that is named as : the littoral zone , the limnetic zone, the profundal zone , the benthic zone and the euphotic zone . the waters temperature will be affected the density. there are several zones in the ponds and the lakes. these are dived by the water column.

The limnology divides the lakes in the three types of zones ., that is the limnetic zone, the littoral zone and the benthic zone.

To learn more about zones here

https://brainly.com/question/29892129

#SPJ4

AlCl 3 is Lewis base,PH3 is Lewis base,BH3 is Lewis acid ,BF3 is Lewis acid.

The crucial step is AlCl 3 accepting a chloride ion lone-pair to generate AlCl 4 and the highly acidic, or electrophilic, carbonium ion. Lewis bases:  RCl +AlCl 3 → R + + AlCl 4−, etc. [ edit] The highest occupied molecular orbital (HOMO) of an atomic or molecular species that is strongly localised is known as a Lewis base.Lewis acid borane (BH3) has three hydrogen atoms and one boron atom in its molecule. The Lewis structure of borane features a single connection connecting each hydrogen atom to boron (BH3). Only three bonds surround the boron atom, and there are no lone pairs on the atom itself. We will learn how to draw the BH3 Lewis structure in this lesson.Only six electrons orbit the boron atom, according the Lewis structure of BF3. As a result, the boron atom's octal is incomplete. Borane BF3 is therefore regarded as a Lewis acid.A highly poisonous gaseous chemical is phosphorus. Three sigma bonds and one lone pair are present around the phosphorus atom in the Lewis structure of phosphine (PH3). Hydrogen and phosphorous atoms have no charges. The trigonal pyramidal shape of PH3 is a fundamental shape.

learn more about Lewis acid Refer:brainly.com/question/15570523

#SPJ4

Neutron is not attracted to the positively charged nucleus since it has no charge. As a result, a neutron can bombard a nucleus even if it is very weak.

As a result, a nuclear reaction can be started by even a very weak neutron bombarding a nucleus. Thus, in a nuclear reaction, a neutron is employed to bombard the nucleus. Neutrons have no charge, therefore they are neither drawn to nor repelled by atoms' nuclei and electrons. Neutron is therefore the best projectile. The connections holding the nucleus together contain enormous energy. These connections can be broken, which will release the nuclear energy. A high-energy neutron is used to start nuclear fission by bombarding a nucleus, which causes the release of further neutrons. The nucleus does not reject a neutron since it has no charge.

To learn more about neutrons click here https://brainly.com/question/29248303

#SPJ4

An organism with the genotype of AaXx can produce gametes containing  either AX, Ax, aX, ax  if the two genes are unlinked .

An organism's genotype is the complete set of its genetic material. [1] Genotype can also be used to refer to the alleles or variants that an individual has at a particular gene or locus. The number of alleles an individual can have for a particular gene depends on the number of copies of each chromosome (also called polyploidy) found in that species. Diploid species like humans have two complete sets of chromosomes. This means that each individual has her two alleles for a particular gene. If both alleles are the same, the genotype is said to be homozygous. If the alleles are different, the genotype is called heterozygous.

Genotypes contribute to the phenotype, observable traits and characteristics of an individual or organism. The extent to which genotype influences phenotype depends on the trait.

Learn more about genotype here : https://brainly.com/question/22117

#SPJ4

Answer:

2.02 L

Explanation:

The volume of a gas is directly proportional to its temperature, according to the ideal gas law. This means that as the temperature of a gas decreases, its volume will also decrease.

To determine the new volume of the balloon as the temperature drops from 311 K to 295 K, we can use the ideal gas law to calculate the new volume of the gas:

PV = nRT

Where:

P = the pressure of the gas (assuming it remains constant)

V = the new volume of the gas

n = the number of moles of the gas (assuming it remains constant)

R = the universal gas constant

T = the new temperature of the gas

Since we know the pressure, number of moles, and universal gas constant, we can solve for the new volume of the gas by substituting in the known values and solving for V:

V = nRT / P

Substituting in the values from the problem, we get:

V = (n * R * 295 K) / P

Since the number of moles and the universal gas constant are constants, we can simplify the equation to:

V = k / P

Where k is a constant equal to the product of the number of moles, the universal gas constant, and the original temperature of the gas (in this case, k = n * R * 311 K).

Since we know the value of k and the pressure of the gas, we can solve for the new volume of the gas by substituting in the known values:

V = (k / P)

= (n * R * 311 K) / P

= (2.07 L * 8.31 L * atm / mol * K * 311 K) / P

= 2.02 L

Therefore, the new volume of the balloon is approximately 2.02 L.

When circuit town electronics sets its televisions at three price levels of $699, $899, and $1,099, it is most likely using product line pricing.

Product line pricing involves the separation of goods and services into cost categories in order to create various perceived quality levels in the minds of consumers. You might also hear product line pricing referred to as price lining, but they refer to the same practice.Selling a product at or below cost to lure customers in and drive other sales is an example of product-line pricing. A restaurant, for example, might offer a low-priced entrée with the purchase of a drink and dessert that have higher profit margins.A product line refers to a particular good or service that a company makes and markets to customers. A food company may extend a product line by adding various similar or related products (e.g., adding mesquite BBQ flavor to its existing potato chips line), and create a more diversified product family.Using product line pricing allows companies to target customers with low-end, mid-range and high-end budgets. By offering two, three or more product tiers, a company can reach a much larger range of customers. This grants companies the potential to attain more sales and greater brand recognition.

Find more about product line pricing.

brainly.com/question/4910796

#SPJ4

Metals : Malleable, Form cations in ionic compounds, shiny solids at room temperature and good conduct of electricity.

Non Metals :  Gases at room temperature , forms anions in ionic compounds, poor conductors of heat.

Metals are all elements besides hydrogen that undergo chemical reactions and lose electrons to produce positive ions. Metals are electropositive elements as a result. They have a brilliant shine, are tough, can resonate sound, and are great heat and electricity conductors. Except for mercury, all metals are solids under normal circumstances.

Non-metals are elements that frequently gain electrons during chemical processes to generate anions. These substances are electronegative ones. They lack luster, are fragile, and are poor heat- and electricity-conductors (except graphite). Non-metals come in solid, liquid, or gaseous forms.

To learn more about Metals and Non-metals refer here

https://brainly.com/question/29404080#

#SPJ4

As per the given balanced reaction, one mole or 63.5 g of Cu produces 2 moles or 215.6 g of silver metal. Hence, 5 g of copper produces16.9 g of Ag.

A displacement reaction is a type of reaction, in which one element or group of the reactant is displaced by the attacking group or element. The reaction between copper and silver nitrate is an example of single displacement reaction.

Given the balanced equation  of the reaction. One mole of Cu produces 2 moles of Ag.

atomic mass of Cu = 63.5 g/mol

atomic mass of Ag = 107.8 g/mol

mass 2 moles of Ag = 2 × 107.8 =215.6 g.

Hence, 63.5 g of Cu produces 215.6 g of Ag.

The mass of Ag produced by 5 g of Cu is calculated as follows:

mass of Ag = (5 × 215.6 g) /63.5 g = 16.9 g

Therefore, the mass of silver precipitated will be 16.9 g.

To find more on silver nitrate, refer here:

https://brainly.com/question/29627918

#SPJ1

Based o the percentage masses of the elements, the empirical formula of epinephrine is C₉H₁₃O₃N.

The empirical formula of epinephrine is calculated below as follow:

Mole ratio of the elements are determined:

Carbon = 59% / 12

Carbon = 0.049 moles

Hydrogen = 7.1% / 1

Hydrogen = 0.07 moles

Oxygen = 26.2% / 16

Oxygen = 0.016

Nitrogen = 7.7% / 14

Nitrogen = 0.0055

The simplest whole-number ratio will be:

C = 0.049/0.0055

C = 9

Hydrogen = 0.07/0.0055

H = 13

Oxygen = 0.016/0.0055

Oxygen = 3

Nitrogen = 0.0055/0.0055

Nitrogen = 1

The empirical formula = C₉H₁₃O₃N

Learn more about empirical formula at: https://brainly.com/question/1603500

#SPJ1

Acid concentration: 0.49 M KOH concentration is 0.49 MKa1=1.0 x 104 eq. rm

a remedy for Take the example of titrating 100 mL of 0.100 M HOCl with 0.100 M KOH at 25 °C. HOCl has a Ka of 3.5 10-8. Calculate the pH after 0.0 mL of KOH in Part 1.

Consider titrating 0.115 M RbOH in a 25.0 mL sample with 0.100 M HCl. Figure out each quantity. The initial pH and the amount of acid that must be added to achieve the equivalence point are also factors. c. the pH after adding 5.0 mL of acid. pH at the equivalency point (d). e. the pH following the addition of 5.0 mL of acid over the equivalency point.

Think about titrating 100 mL of 0.59 M H 3 a 1-3 a2-6 a3. 1) Determine the pH following

To learn more about acid  please click on below link

https://brainly.com/question/14072179

#SPJ4

In a gas chromatogram, the retention time of compounds A and B are 1.25 min and 1.45 min, respectively. If both of these compounds have similar structures, Compound A has a higher boiling point.

Gas chromatogram is a widely used technique in analytical chemistry for the separation and investigation of compounds that may evaporate without disintegrating (GC). The purity of a substance can be assessed by GC, as can the components of a mixture. Preparative chromatography can make use of GC to separate pure compounds from a mixture. Other names for gas chromatography include vapor-phase chromatography (VPC) and gas-liquid partition chromatography (GLPC). These alternative names and the accompanying acronyms are frequently used in scientific literature. Gas chromatography is a technique for separating compounds in mixtures by injecting a gaseous or liquid sample into a mobile phase, which is usually referred to as the carrier gas, and passing the gas through a stationary phase. The mobile phase is often composed of an inert gas or an unreactive gas, such as helium, argon, nitrogen, or hydrogen. The stationary phase is a minuscule layer of viscous liquid on a surface of solid particles on an inert solid support in a piece of glass or metal tubing known as a column.

To know more about gas chromatogram please refer: https://brainly.com/question/18763279

#SPJ4

The chemical species in solution S2 Fe(s)+NiCl2(aq) → FeCl2(aq)+Ni(s)

Fe(s) ------> [tex]Fe^{2+}[/tex] + 2e                              (Oxidation)

[tex]Ni^{2+}[/tex] (aq) + 2e ------> Ni(s)                        (Reduction)

Galvanic Cell

Galvanic cells employ the electrical energy generated by the transport of electrons during a redox reaction to carry out practical electrical work. By separating the oxidation and reduction half-reactions and connecting them with a wire so that the electrons must pass through the wire, it is possible to gather the electron flow.

Write a balanced equation for the half-reaction that happens at the cathode of this cell = Ni (aq) + 2e ------> Ni(s)

Write a balanced equation for the half-reaction that happens at the anode of this cell = Fe(s) ------> [tex]Fe^{2+}[/tex] + 2e.

Of what substance is E1 made? = Fe

of what substance is E2 made? = Ni

What are the chemical species in solution S1? = [tex]Fe^{2+}[/tex]

What are the chemical species in solution S2? = [tex]Ni^{2+}[/tex]

To learn more about Galvanic Cell

https://brainly.com/question/15096829

#SPJ1

Water is a polar molecule because in the O-H bond of water, Oxygen is more electronegative due to which partial positive charge and partial negative charge is created on hydrogen and oxygen respectively, resulting in a dipole moment.

A dipole moment is created between two atoms having a suitable electronegativity (ability to pull electrons more towards itself) difference.

A difference in electronegativity between two atoms creates a partial positive charge and a partial negative charge on the atoms. The electrons are pulled towards the atom having partial negative charge. The resultant direction of the atoms in which they get pulled gives the dipole moment of the bond.

If the resultant dipole is zero then the bond is considered to be non-polar

water is an example of a polar molecule as in the bent structure of the molecule, with oxygen at the center, surrounded by two H atoms on both sides, the electrons of the two O-H bonds are pulled towards O, resulting in a dipole moment in the upward direction. Thus, making water a polar molecule.

To know more about polar molecule here

https://brainly.com/question/15913787

#SPJ4

A well-known NMR technique called diffusion ordered spectroscopy (DOSY) provides diffusion coefficients for specific resonances in NMR spectra.

The main applications of DOSY are the analysis of small molecule mixtures and the oligomeric state of biomolecules. The spreading Self-Diffusion (SD)-NMR and diffusion ordered spectroscopy are two common names for the NMR technology (DOSY). This is accomplished by fusing magnetic field gradients, which encode spatial information, with radio-frequency pulses, which are commonly employed in NMR spectroscopy. Magnetic field gradients are used by Diffusion Ordered Spectroscopy (DOSY) to examine diffusion processes in both solid and liquid materials. Liquid structure is discovered using NMR spectroscopy. It is also used to figure out how soluble chemical molecules are structured.

Learn more about diffusion here-

https://brainly.com/question/10532944

#SPJ4

Combustion of 31.68 g of a compound containing only carbon, hydrogen, and oxygen produces 36.67 g CO₂ and 15.01 g H₂O. the empirical formula of the compound is CH₂O.

given that :

mass of CO₂ = 36.67 g

mass of H₂O = 15.01 g

total mass of compound = 31.68 g

moles of CO₂ = 36.67 / 44

                       = 0.833 mol

moles of C = 0.833 mol

moles of  H₂O = 15.01 / 18

                        = 0.833 mol

moles of H = 2(0.833)

                  = 1.667 mol

mass of carbon = 0.833 × 12

                           = 10 g

mass of hydrogen = 1.667 × 1

                               = 1.667 g

mass of oxygen = 31.68 - ( 10 + 1.67 )

                             = 20 g

moles of Oxygen = 20 / 16

                             = 1.25 mol

dividing by the smallest one :

C = 0.833 / 0.833 = 1

H = 2

O = 1

The empirical formula is CH₂O.

To learn more about empirical formula here

https://brainly.com/question/11288730

#SPJ4

Answer:Co2O3

Explanation:

look it up

Answer:

Co2O3

Explanation:

when you write any formula you apply the criss-cross method where you write the charges of each substance

Co3 and O2

applying the criss-cross method( you switch the charges number, in this case you switch the 2 and the 3) :-

Co2 and O3

so Co2O3

The volume of the object is 1.5ml.

This refers to the space occupied within the boundaries of an object in three-dimensional space. It is also called the capacity of the object.

In the question:

ρ = 400 g/mL

m = 600 mg

v = ?

Formular for calculating density ρ:

ρ = m/v

Where,

ρ= Density of the object

m= Mass of the object

v = volume of the object

Were are given the values of density and mass in the question. We are to calculate the volume.

Makinig v subject of the formular we have:

v = m/ρ

v =  600 mg

      400 g/mL

v = 1.5ml

Learn more about volume on

https://brainly.com/question/23937702

#SPJ1

The reaction is first order if the plot of ln[H₂O₂] vs time is a straight line. Therefore, option B is correct.

The order of reaction can be described as the relationship between the rate of a reaction and the concentration of the species that participated in it. In order to get the reaction order, the rate expression of the reaction must be obtained.

The rates of reactions depend on the concentration of only one reactant can be considered as the first order of the reaction. In these reactions, there can be multiple reactants present, but only one reactant can be of first-order concentration.

An example of a first-order reaction can be : [tex]2H_2O_2 \longrightarrow 2H_2O + O_2[/tex]

The plot between the ln[H₂O₂] vs time will be a straight line.

Learn more about the order of the reaction, here:

https://brainly.com/question/1769080

#SPJ1

The Solubility Of Fe(OH)₂ In Water At 25 °C Is Measured To Be 5.2x 10⁻⁴ Fe(OH)₂ Ksp value is 5.6 × 10⁻¹⁰.

The chemical reaction is given as follows :

Fe(OH)₂ ⇄  Fe²⁺    +   2OH⁻

Ksp expression for the given reaction is given as follows :

Ksp = [Fe²⁺] [OH⁻]²

the solubilty S =  5.2x 10⁻⁴

so , the Ksp = S × (2S)²

                    = 4S³

Ksp = 4 ×S³

      = 4 × (  5.2x 10⁻⁴ )³

      = 4 × 140.6 × 10⁻¹²

      = 5.6 × 10⁻¹⁰

The solubility product value for Fe(OH)₂   that is Ksp value is 5.6 × 10⁻¹⁰.

To learn more about solubility here

https://brainly.com/question/9237932

#SPJ4