Answer:
the answer will be 24.40 ohms law
Explanation:
A swift moving hawk is moving due west with a speed of 30 m/s; 5.0 s later it is moving due north with a speed of 20 m/s.
(A) What are the magnitude and direction of Δvav vector during this 5 s interval? and
(B) What are the magnitude and direction of vector aav during this 5 s interval?
Answer:
See explanation
Explanation:
Now we have;
vi = (-30, 0) m/s
vf = (0, 20) m/s
Δvav= vf - vi= (30, 20) m/s
magnitude of Δvav= √30^2 + 20^2 = 36.0 m/s
Direction = tan-1(20/30) = 33.69°
For aav
aav= Δvav/t = (30/5, 20/5) = (6,4) m/s^2
magnitude of aav = √6^2 + 4^2 = 7.2 m/s^2
direction of aav = tan-1(4/6) = 33.69°
A rectangular reflecting pool is 85.0 ft wide and 120 ft long. What is the area of the pool in square meters?
how does a battery work?
Answer:
Essentials. A battery is a device that stores chemical energy and converts it to electrical energy. The chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit. The flow of electrons provides an electric current that can be used to do work.
give two examples of uses of the expansion and contraction of materials
if we hold a very hot glass tumbler under cold water, it cracks. This is because the outer surface of the glass comes in direct contact with cold water and contracts more as compared to the inner surface. We observed that water expanded on heating.
Railway tracks consist of two parallel metal rails joined together. Small gaps, called expansion gaps, are deliberately left between the rails as there is an expansion of the rails in hot weather. Water expands on heating.
A 50kg refrigerator is being moved across a kitchen floor with an applied force of
300N. There is a known friction force of 50N acting against the motion of the
refrigerator.
What was the acceleration of the refrigerator? [ Select ]
m/s2
Answer:
5m/s²
Explanation:
Given parameters:
Mass of refrigerator = 50kg
Applied force = 300N
Frictional force = 50N
Unknown:
Acceleration of the refrigerator = ?
Solution:
To solve this problem:
Net force = m x a
m is the mass
a is the acceleration
Net force = Applied force - Frictional force
300 - 50 = 50 x a
250 = 50 x a
a = 5m/s²
How do I solve this problem please help
Answer:
som,eythiung did cant wait
Explanation:
ya so i texted maria and she said i con c()me over so letyeyey yeah betty letty
PAINN I MISS JUOICE WORLDD PAINNNN
Why is damage from sound waves is an issue on the launchpad but not in the air
(I would have done more points for answering but I'm almost out sry. just pls answer and help.)
The sound wave does not damage the air because no external factors such as reflection, amplification, and vibrations are present. However, in the launch pad factors such as reflection, amplification, and vibrations are present which damages the sound wave.
Closeness to the Sound Source: When a rocket is fired on the launchpad, it creates a tremendous amount of noise in proximity to the nearby equipment and structures.
When a rocket is launched, concentrated sound waves are created that can seriously harm neighboring structures, especially if such structures are not built to handle such strong vibrations. In contrast, once a rocket is in the air, the sound waves spread out and become less forceful as they travel through the atmosphere, decreasing the possibility that they may cause harm.
Reflection and Amplification: The launchpad environment can serve as an echo chamber for sound waves because of its huge, solid structures.
Hence, The sound wave does not damage the air because no external factors such as reflection, amplification, and vibrations are present. However, in the launch pad factors such as reflection, amplification, and vibrations are present which damages the sound wave.
To learn more about soundwave, here:
https://brainly.com/question/31851162
#SPJ4
A 87 kg man has a total mechanical energy of 1780 J .If he is swinging downward and is currently 1.4 m above the ground, what is his speed? Use g = 10 m/s^2
Answer:
6.4m/s
Explanation:
The total mechanical energy of the man is 1780J.
This mechanical energy is the energy due to the motion of the body and it is a form of kinetic energy.
Also, mass = 87kg
Kinetic energy = [tex]\frac{1}{2}[/tex] m v²
m is the mass
v is the velocity
1780 = [tex]\frac{1}{2}[/tex] x 87 x v²
v² = 40.9
v = 6.4m/s
5.
What is the apparent colour of a red shirt when viewed in pure green light.?
Red
(b)- Green
Yellow (d) Black) (e) Blue
Answer: black
Explanation: When green light is shone on a red object, it absorbs all of the green light and not reflecting anything. Hence, it appears black.
Which has a greater momentum and greater kinetic energy-a truck with
a mass of 3530 kg moving at a speed of 21 m/s or a car with a mass of
1620 kg moving at a speed of 54 m/s? Answers below are given in the
form: greater momentum, greater kinetic energy.
Answer:
the car has greater momentum.
the car has greater kinetic energy.
Explanation:
FOR MOMENTUM:
Momentum is given as the product of mass and velocity of an object:
[tex]P = mv[/tex]
where,
P = momentum
m = mass
v = velocity
For Truck:
[tex]P_{truck} = (3530\ kg)(21\ m/s)\\P_{truck} = 74130 Ns[/tex]
For Car:
[tex]P_{car} = (1620\ kg)(54\ m/s)\\P_{car} = 87480\ Ns[/tex]
Therefore, car has greater momentum.
FOR KINETIC ENERGY:
Kinetic Energy is given as:
[tex]K.E = \frac{1}{2} mv^{2}[/tex]
where,
K.E = Kinetic Energy
m = mass
v = velocity
For Truck:
[tex]K.E_{truck} = \frac{1}{2} (3530\ kg)(21\ m/s)^{2}\\K.E_{truck} = 778365\ J = 778.36\ KJ[/tex]
For Car:
[tex]K.E_{truck} = \frac{1}{2} (1620\ kg)(54\ m/s)^{2}\\K.E_{truck} = 2361960\ J = 2361.96\ KJ[/tex]
Therefore, car has greater kinetic energy.
You are standing next to a table and looking down on a record player sitting on the table. Take the spindle (axis of rotation) to be the center of your coordinate system and the y axis to be perpendicular to the side of the player you are standing next to. Long-playing records revolve 33(1/3) times per minute. You put a small blob of clay at the edge of a record that has a radius of 0.15 m, positioning the clay such that it is at its greatest value of y at t = 0.
Equation of motion for the y component of the clay's position: y(t)=Asin(ωt+ϕi)
Required:
a. What is the rotational speed of the clay?
b. Determine the value of A in the equation of motion.
c. Determine the value of ϕi in the equation of motion. Suppose that −π<ϕi≤π
Answer:
a) the rotational speed of the clay is 3.45 rad/s
b) the value of A in the equation of motion is 0.15 m
c) the value of ϕi is 90° or π/2 rad.
Explanation:
Given that;
Revolution per minute rpm = 33( 1/3) = 100/3
The frequency f = 100 / 3(60) = 0.55 Hz
a)
Rotational speed W = 2πf
we substitute
W = 2π × 0.55
W = 3.45 rad/s
Therefore, the rotational speed of the clay is 3.45 rad/s
b)
given equation; y(t)=Asin(ωt+ϕi)
given that radius = 0.15 m
y(t)=(0.2)sin(ωt+ϕi)
Therefore, the value of A in the equation of motion is 0.15 m
c)
since y(t) has the maximum value at t =0
so at t=0
y(0) = (0.15)sin(ω(0)+ϕi)
= 0.15sin(ϕi)
this will give maximum value when ϕi = 90°
so
y(0) = (0.15)sin(ω(0)+ϕi)
= 0.15sin(90°)
= 0.15
hence, the value of ϕi is 90° or π/2 rad.
1. 9mA electric current is flowing through a conducting wire. Then the number of electron
passing through it in 3mimute is?
A)2x10^18
B) 1X10^18
C) 2x10^19
D) 1.01x10^19
Answer:
use the formula negative -eE/A×t
Two 13.0-cm-diameter electrodes 0.59 cm apart form a parallel-plate capacitor. The electrodes are attached by metal wires to the terminals of a 14 V battery. What is the charge on each electrode after insulating handles are used to pull the electrodes away from each other until they are 1.7 cm apart? The electrodes remain connected to the battery during this process. What is the electric field strength inside the capacitor after insulating handles are used to pull the electrodes away from each other until they are 1.7 cm apart? The electrodes remain connected to the battery during this process. What is the potential difference between the electrodes after insulating handles are used to pull the electrodes away from each other until they are 1.7 cm apart? The electrodes remain connected to the battery during this process.
Answer:
Explanation:
The capacitor is of parallel plate capacitor type
Capacitance C = ε₀ A / 4π d
ε₀ is 8.85 x 10⁻¹² , A is plate area and d is distance between plate .
d = 1.7 cm
C = 8.85 x 10⁻¹² x π x (6.5 x 10⁻² )² / 4π x 1.7 x 10⁻²
= 55 x 10⁻¹⁴F .
Charge on each electrode = C x V , V is voltage of battery .
= 55 x 10⁻¹⁴ x 14
= 770 x 10⁻¹⁴ C
Electric field strength = V / d where V is potential difference of battery , d is distance between plate .
= 14 / 1.7 x 10⁻²
= 8.23 x 10² V / m
The potential difference between plate
= potential difference of the battery
= 14 V .
The second law of thermodynamics imposes what limit on the efficiency of a heat engine?
A. The energy a heat engine must deposit in a cold reservoir is greater than or equal to the energy it extracts from a hot reservoir.
B. The energy a heat engine must deposit in a cold reservoir is greater than or equal to the energy extracted as useful work.
C. A heat engine must deposit some energy in a cold reservoir.
Answer:
C. A heat engine must deposit some energy in a cold reservoir.
Explanation:
The second law of thermodynamics says that "It is impossible to extract an amount of heat Q from a hot reservoir and use it all to do work W. Some amount of heat q must be exhausted to a cold reservoir."
This means that if we extract an amount of heat Q from the hot reservoir, the work W can never be exactly equal to Q, then there is a surplus of heat q that must be deposited in a cold reservoir.
Then we have the equation:
Q = W + q
From this we can conclude that the correct option is:
C. A heat engine must deposit some energy in a cold reservoir.
There will be always some energy that is not transformed into work, and is deposited in a cold reservoir.
C. A heat engine must deposit some energy in a cold reservoir.
The second law of thermodynamics says that "It is impossible to extract an amount of heat Q from a hot reservoir and use it all to do work W. Some amount of heat q must be exhausted to a cold reservoir". This means that if we extract an amount of heat Q from the hot reservoir, the work W can never be exactly equal to Q, then there is a surplus of heat q that must be deposited in a cold reservoir. Then we have the equation: Q = W + q There will be always some energy that is not transformed into work, and is deposited in a cold reservoir.Therefore, option C is correct.
Learn more:
brainly.com/question/17172535
PLZ HELP WILL MARK BRAINLIEST!!
Amy has a mass of 50 kg, and she is riding a skateboard traveling 10 meters per second. What is her momentum?
5 kg·m/s
10 kg·m/s
50 kg·m/s
500 kg·m/s
Answer:
[tex]500 \: \mathrm{kg} \cdot \mathrm{m/s}[/tex]
Explanation:
The momentum of an object is given as [tex]p=mv[/tex]. Since Amy has a mass of 50 kg and is travelling 10 m/s, her momentum is [tex]p=mv=50\cdot 10 =\fbox{$500\: \mathrm{kg\cdot m/s}$}[/tex].
Answer:
500
Explanation:
PLEASEEEEEE HELPPPPPPP
Define resistance and discuss how it affects current.
Answer:
Resistance is the opposing of the flow of current through a conductor.
A bottle rocket is fired off and has an acceleration of 14.5 m/s2 for the 2.25s until it burns out. If it starts at rest, what distance does it cover?
Answer:
S = 16.3125m
Explanation:
Given the following data;
Acceleration, a = 14.5m/s²
Time, t = 2.25secs
Since the bottle rocket starts from rest, its initial velocity is 0m/s.
To find the distance S, we would use the second equation of motion.
S = ut + ½at²
Substituting into the equation, we have
S = 0(2.25) + ½*14.5*2.25
S = 0 + 7.25*2.25
S = 16.3125m
Therefore, the bottle rocket covered a distance of 16.3125 meters.
A tangent line drawn on a velocity-time graph has a rise of 19 m/s and a run of 4.0 m/s. How large is the acceleration? What type of acceleration Is this?
Answer:
Acceleration = 4.8 m/s²
Explanation:
Given:
Change in velocity = 19 m/s
Change in time = 4 s
Find:
Acceleration
Computation:
Acceleration = Change in velocity / Change in time
Acceleration = 19/4
Acceleration = 4.8 m/s²
Positive acceleration
at what speed does the kg ball move ?
Answer: Choice A) 2 meters per second
=======================================================
Explanation:
The smaller ball has momentum of
p = m*v
p = (1 kg)*(4 m/s)
p = 4 kg*m/s
All of this momentum transfers into the larger ball because the smaller ball comes to a complete stop.
For the larger ball, we have p = 4 and m = 2. Let's find v.
p = m*v
4 = 2*v
4/2 = v
2 = v
v = 2 m/s which is why the answer is choice A
The larger ball moves at a speed of 2 meters per second. The speed is cut in half compared to the smaller ball because the larger ball has more inertia (aka more mass), and therefore it takes more energy to move it. If you apply the same energy to each, then the smaller object moves faster.
Why can ultraviolet waves be dangerous
Answer:
They can cause sunburn. Exposure to UV rays can cause premature aging of the skin and signs of sun damage such as wrinkles, leathery skin, liver spots, actinic keratosis, and solar elastosis. UV rays can also cause eye problems.
Explanation:
Two 0.60-kilogram objects are connected by a thread that passes over a light, frictionless pulley. The objects are initially held at rest. If a third object with a mass of 0.30 kilogram is added on top of one of the 0.60-kilogram objects and the objects are released, the magnitude of the acceleration of the 0.30-kilogram object is most nearly:______
Answer:
2 m/s²
Explanation:
From the given information:
The first mass m_1 = 0.6 kg
The second mass m_2 = 0.3 kg
The magnitude for the acceleration of 0.3 kg is:
a = net force/ effective mass
Mathematically, it can be computed as follows:
[tex]a = \dfrac{F}{m}[/tex]
[tex]a = \dfrac{(m_2 +m_1 -m_1) }{(m_2+m_1+m_1)}(g)[/tex]
[tex]a = \dfrac{0.3 +0.6 -0.6}{(0.3 +0.6+0.6)}(9.8)[/tex]
a ≅ 2 m/s²
Many scientific studies have found that colds are caused by viruses. What is this? *
Fact
Interpretation
Analysis
Opinion
Answer:
Analysis
Explanation:
Because you must Analysis each and every cold too find out which virus caused this.
It’s weird because Interpretation and Analysis have the meaning of examination
treatment for PTSD campus be described A.multumodal multi-phasic b. atheoretical C. stress inclusion D.eclectic
Answer:
Stress inclusion
Explanation:
A type of cognitive behavior therapy for PTSD is pressure inoculation preparation. CBT is a widely used form of antidepressant that can make you know wrong and/or pessimistic emotions that have influenced your actions and alter them.
Static electricity is the build up of an electrical charge on the surface of an
object. Why is it called "static" electricity?*
Answer: Static electricity is the build up of an electrical charge on the surface of an object. It's called "static" because the charges remain in one area rather than moving or "flowing" to another area.
Explanation:
A 2 kg toy car moves at a speed of 5 m/s. If a child applies a 5N force for 2 m in the same direction the car is already moving, what is the change in kinetic energy of the car?
Answer:
[tex]10\: \mathrm{J}[/tex]
Explanation:
The kinetic energy of an object is [tex]KE=\frac{1}{2}mv^2[/tex], where [tex]m[/tex] is the mass of the object and [tex]v[/tex] is the velocity of the object.
The toy car's initial kinetic energy is [tex]KE_{i}=\frac{1}{2}\cdot 2\cdot 5^2=25\: \mathrm{J}[/tex].
After the child applies a 5N force on it in the same direction, its velocity will increase but its mass will stay the same.
To find the final velocity of the toy car, we can use kinematic equation [tex]v_f^2=v_i^2+2a\Delta x, \\ v_f=\sqrt{v_i^2+2a\Delta x}[/tex]
We are given [tex]v_i=5\: \mathrm{m/s}[/tex] and [tex]\Delta x = 2\: \mathrm{m}[/tex].
To find acceleration:
[tex]F=ma, a=\frac{F}{m}=\frac{5}{2}=2.5\: \mathrm{m/s^2}[/tex].
Now substitute [tex]v_i=5\: \mathrm{m/s}, \: a=2\: \mathrm{m/s^2}, \: \Delta x = 2\: \mathrm{m}[/tex] into [tex]v_f=\sqrt{v_i^2+2a\Delta x}[/tex] to get [tex]v_f\approx 5.92\: \mathrm{m/s}[/tex].
Using this, we can find the final kinetic energy of the toy car is [tex]KE_f=\frac{1}{2}\cdot 2\cdot 5.92^2[/tex].
Thus, the change in kinetic energy is [tex]KE_f-KE_i=\frac{1}{2}\cdot2\cdot 5.92^2-\frac{1}{2}\cdot 2\cdot 5^2=\fbox{$10\: \mathrm{J}$}[/tex] (one significant figure).
The change in the kinetic energy of the car is 10 J.
The given parameters;
mass of the car, m = 2 kginitial velocity of the car, u = 5 m/sforce applied by the child, F = 5 Ndistance traveled, s = 2 mThe acceleration of the car is calculated as follows;
[tex]F = ma\\\\a = \frac{F}{m} \\\\a = \frac{5}{2} \\\\a = 2.5 \ m/s^2[/tex]
The final velocity of the car is calculated as follows;
[tex]v^2 = u^2 + 2as\\\\v = \sqrt{u^2 + 2as} \\\\v = \sqrt{5^2 \ + \ 2(2.5)(2)} \\\\v = 5.92 \ m/s[/tex]
The change in the kinetic energy of the car is calculated as follows;
[tex]\Delta K.E = \frac{1}{2} m(v^2 - u^2)\\\\\Delta K.E = \frac{1}{2} \times 2 \times (5.92^2\ - \ 5^2)\\\\\Delta K.E = 10 \ J[/tex]
Learn more about kinetic energy here: https://brainly.com/question/1932411
explain with one example that different types of organisums live in one habitation
Answer:
When you look at a simple koi pond you can find Koi (the secondary consumer) that feeds off of the zooplankton (first consumer), they eat the phytoplankton (producers). All in a simple food chain
Explanation:
Basically, Koi eat the little animal plankton (zooplankton) that then eats the plant plankton (phytoplankton) that can only end when a part of that habitat is removed. If you got rid of the plant plankton then the whole chain would collapse and most likely die.
The speed limit on some segments of interstate 4 is 70 mph. What is this in km/h?
Answer:
112.63km/hr
Explanation:
The given dimension is :
70mph
We are to convert this to km/hr
1 mile = 1.609km
so;
70mph x 1.609 = 112.63km/hr
So,
The solution is 112.63km/hr
The force of gravity acting on an object is directed through this
center of gravity and toward the center of the
Answer:
Earth.
Explanation:
Center of gravity can be defined as the specific point where all of the weight of an object is concentrated.
Generally, all the objects found around the world all have a center of gravity.
When an object is balanced so that a displacement lowers its center of gravity, the object is said to be in stable equilibrium.
Hence, the force of gravity acting on an object is directed through this center of gravity and toward the center of the earth.
Weight can be defined as the force acting on a body or an object as a result of gravity.
Mathematically, weight is given by the formula;
[tex] Weight, W = mg [/tex]
Where;
m is the mass of an object.
g is acceleration due to gravity.
explain resolution of Force
Answer:
it is defined as splitting up the given force into a number of components, without changing its effects on the body is called resolution of forces. A force is generally resolved along with two mutually perpendicular directions.
Explanation:
7Which of the following terms describes how glaciers move?
A Quickly
B Gradually
C Aggressively
D Rapidly
Answer:
D is the answer I think (0 w 0 )
Explanation:
The glaciers move gradually. Hence, option (C) is correct.
What is glacier?A glacier is a long-lasting mass of heavy ice that is perpetually moving. When the ablation of snow is greater than the accumulation over a long period of time, frequently centuries, a glacier forms.
As it slowly flows and deforms under forces brought on by its weight, it gains distinctive features like crevasses and seracs. Cirques, moraines, and fjords are the result of the erosion of rock and debris from its substrate as it travels.
The considerably thinner sea ice and lake ice that form on the surface of bodies of water are not the same as glaciers, which form only on land and may flow into water bodies.
The huge ice sheets, commonly referred to as "continental glaciers," in the polar areas of the planet contain 99 percent of the planet's glacial ice.
Learn more about glaciers here:
https://brainly.com/question/19709729
#SPJ2
