A train whistle is heard at 300 Hz as the train approaches town. The train cuts its speed in half as it nears the station, and the sound of the whistle is then 290 Hz. What is the speed of the train before and after slowing down? Assume the speed of sound is 343 m/s.

Answer:

(a) V = 3.75 x 10^5 V

(b) q = 5.2 x 10^-6 C

Explanation:

Diameter, d = 25 cm

radius, r = 12.5 cm = 0.125 m

Electric field, E = 3 x 10^6 V/m

(a) The maximum potential is given by

[tex]V = E \times r \\\\V = 3\times 10^6\times 0.125\\\\V = 3.75\times10^5 V[/tex]

(b) The charge is given by

[tex]V = \frac{k q}{r}\\\\3.75\times10^5=\frac{9\times10^9\times q}{0.125}\\\\q = 5.2\times 10^{-6} C[/tex]

Explanation:

The weight of an object on the surface of the earth is equal to the gravitational force exerted by the earth on the object.

[tex]W=F_G[/tex]

[tex]mg = G \dfrac{mM}{R^2}[/tex]

which gives us an expression for the acceleration due to gravity g as

[tex]g = G\dfrac{M}{R^2}[/tex]

At a height h = R, the radius of a satellite's orbit is 2R. Then the acceleration due to gravity [tex]g_h[/tex] at this height is

[tex]mg_h = G \dfrac{mM}{(2R)^2}= G \dfrac{mM}{4R^2}[/tex]

Simplifying this, we get

[tex]g_h= G \dfrac{M}{4R^2} = \dfrac{1}{4} \left(G \dfrac{M}{R^2} \right) = \dfrac{1}{4}g[/tex]

Answer:

the correct answer is C   v = 60 cm / s

Explanation:

The speed of a wave is related to the frequency and the wavelength

         v = λ f

They indicate that the object performs 20 oscillations every second, this is the frequency

         f = 20 Hz

the wavelength is the distance until the wave repeats, the distance between two consecutive peaks corresponds to the wavelength

         λ = 3 cm = 0.03 m

let's calculate

       v = 20 0.03

       v = 0.6 m / s

       v = 60 cm / s

the correct answer is C

Maximum horizontal force that can be applied on the box is 300.32 N.

Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.

Kinetic friction is defined as the opposing force exerted by the surface on an object in contact with it, when there is relative motion between the two surfaces.

Here,

Mass of the box, m = 150 lb = 68.1 kg

Coefficient of kinetic friction, μ = 0.45

Maximum horizontal force that can be applied on the box is the kinetic frictional force. Frictional force,

F(k) = μmg

F(k) = 0.45 x 68.1 x 9.8

F(k) = 300.32 N

Now, the box sits on a ramp inclined at 60°

Coefficient of kinetic friction, μ = 0.45

The net force here acting on the box placed in the ramp is due to the kinetic frictional force and the weight of the box.

So,

Frictional force, F(k)' = μmgcosθ

F(k)' = 0.45 x M x 9.8 x cos 60

F(k)' = 2.2M

Weight of the box acting horizontally,

W = Mgsinθ

W = M x 9.8 x sin60

W = 8.5M

Therefore, net force,

Fn = W - F(k)'

Fn = 8.5M - 2.2M

Fn = 6.3M

The total force acting on the box is

F = F(k) - Fn

ma = 300.32 - 6.3M

Since, the box is moving with constant speed, the acceleration, a = 0

Therefore,

300.32 - 6.3M = 0

6.3M = 300.32

M = 300.32/6.3

M = 47.7 kg = 105.16 pound

Hence,

Maximum horizontal force that can be applied on the box is 300.32 N.

Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.

To learn more about kinetic friction, click:

https://brainly.com/question/29100737

#SPJ2

Answer:

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

f is the force

m is the mass

From the question we have

[tex]a = \frac{4200}{1500} = \frac{42}{15} \\ = 2.8[/tex]

We have the final answer as

Hope this helps you

Answer:

L = 11.014 cm

Explanation:

Halfway between the two lenses is 19/2 = 9.5 cm.

Thus, this means virtually with respect to lens, the final image is at -9.5 cm

Thus, from here, we will work this out backwards.

Let's first solve for the initial position of the object for the second lens;

(1/S2) + (1/s'2) = (1/f2)

Where s'2 is the real image.

F2 is focal length

Thus;

(1/s'2) = (1/f2) - (1/s2)

(1/s'2) = (1/15) - (1/-9.5)

(1/s'2) = 0.1719

s'2 = 5.82 cm

The object for the second lens is located at 5.82 cm in front of the second lens.

Now, The object for the second lens and the image for the first lens will be the same.

This means the distance of the image from the first lens is at; 19 - 5.82 = 13.18 cm.

Now let's solve for the object distance of the first lens which will be denoted by L.

1/L = (1/f1) + (1/s'1)

Where f1 = 6 cm

1/L = (1/6) - (1/13.18)

1/L = 0.090794

L = 1/0.090794

L = 11.014 cm

Answer:

An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume. ... In electric circuits the charge carriers are often electrons moving through a wire.

Answer:

The flow of moving electrons

Answer:

Gravitational potential energy is mass of the object times the gravitational constant times the height of the object:

U = mgh (I will use 10 for the gravitational constant but you can use 9.8 or 9.81 or something even more accurate)

U = 280

The gravitational potential of the object is 280 joules

Answer:

c. More than 2 s

Explanation:

First, we will find the length of the pendulum:

[tex]T = 2\pi \sqrt{\frac{l}{g}}\\\\2\ s = 2\pi \sqrt{\frac{l}{9.81\ m/s^2}}\\\\4\ s^2 = 4\pi^2 (\frac{l}{9.81\ m/s^2})\\\\l = \frac{(4\ s^2)(9.81\ m/s^2)}{4\pi^2} \\\\l = 0.99\ m[/tex]

Now, the value of g becomes 1.625 m/s² on the surface of the moon. So the time period will be:

[tex]T = 2\pi \sqrt{\frac{l}{g}}\\\\T = 2\pi \sqrt{\frac{0.99\ m}{1.625\ m/s^2}}\\\\[/tex]

T = 4.9 s

Therefore, the correct option is:

c. More than 2 s

Answer:

B

Explanation:

The liquid evaporates in the solid is left in the dish..

Answer:

1. Carpenter

2. True

Explanation:

While a mason was working concrete into the formwork, the formwork collapses. The best person to rectify this problem is CARPENTER.

This is because it is the job of the Carpenter to design and build formwork, most especially wooden formwork. Formwork is like casing built to receive concrete and reinforcement during construction. Hence, when formwork collapses either due to stress, tension, or improper construction, it is the job of Carpenter to reconstruct the formwork or rectify the problem.

It is TRUE that when a device made in a workplace had defects. To address this issue the workshop manager should communicate directly with the workshop​. However, this communication will be an instruction on what to do next, and it usually directs those responsible to take action where necessary. For example, a workshop manager communicates to a carpenter about the need to rectify a chair or table that has a defect.

Answer:

The answer is c

Thermal energy moves within the air from the flames to the marshmallow.

Explanation:

Hope it helps

You sit with friends around a campfire, roasting marshmallows. then the transfer of thermal energy involved in this system is an example of radiation Thermal energy moves within the air from the flames to the marshmallow. Hence option C is correct.

In physics and engineering, the phrase "thermal energy" is thrown around in a lot of different situations. It can relate to a variety of distinct physical notions. Included in this are the internal energy, or enthalpy, of a body of matter and radiation; heat, which is a form of energy transfer (as is thermodynamic work); and the characteristic energy of a degree of freedom in a system described in terms of its microscopic particulate constituents (where T denotes temperature and k denotes the Boltzmann constant.

Hence option C is correct.

To know more about Energy :

https://brainly.com/question/1932868

#SPJ2.

Answer:

Force is the strength or weight of things that depends on movement. The types of forces are conteact force, spring force, applied force, air resistance force, normal force, frictional force, tension force, and non-contact force.

Air is classified as a mixture. Option D is the correct answer.

Air is a combination of different gases, primarily nitrogen (about 78%), oxygen (about 21%), and small amounts of other gases such as carbon dioxide, argon, and trace elements. These gases are not chemically bonded to each other, but rather exist together in the same space. Option D is the correct answer.

In a mixture, the substances involved retain their individual properties and can be separated by physical means. This is true for air as well. The gases in air can be separated through processes like fractional distillation or filtration. It's important to note that air also contains other components such as water vapor, dust particles, and pollutants, which can vary in concentration depending on the location and environmental conditions. These components further contribute to the complex nature of air as a mixture.

Learn more about Air here:

https://brainly.com/question/636295

#SPJ2

Answer:

9.965 nF

Explanation:

The capacitance of the axon C = εA/d where ε = dielectric constant = 24.78 × 10⁻¹² F/m, A = surface area of axon = 2πrL where r = radius of axon = 8 μm = 8 × 10⁻⁶ m and L = length of axon = 8 cm = 8 × 10⁻² m and d = thickness of membrane = 0.01 μm = 0.01 × 10⁻⁶ m

So, C = εA/d

C = ε2πrL/d

Substituting the of the values variables into the equation, we have

C = ε2πrL/d

C =  24.78 × 10⁻¹² F/m × 2π × 8 × 10⁻⁶ m × 8 × 10⁻² m/0.01 × 10⁻⁶ m

C =  9964.63 × 10⁻²⁰ Fm/0.01 × 10⁻⁶ m

C =  996463 × 10⁻¹⁴ F

C = 9.96463 × 10⁻⁹ F

C = 9.96463 nF

C ≅ 9.965 nF

Answer:

A) 3.367 × 10^(-6)

B) 2.97 × 10^(7) N/C

C) Upwards

Explanation:

We are given;

Mass of bee; m = 100 mg = 100 × 10^(-6) kg

Charge on bee;q=33 pC = 33 × 10^(-12)C

Electric field strength; E = 100 N/C

A) Formula for weight of bee; W = mg = 100 × 10^(-6) × 9.8 = 9.8 × 10^(-4) N

Electric force on Bee; F = qE = 33 × 10^(-12) × 100 = 33 × 10^(-10) N

ratio of the electric force on the bee to the bee's weight; F/W = (33 × 10^(-10))/(9.8 × 10^(-4)) = 3.367 × 10^(-6)

B) For the bee to be suspended in the air, it means the weight of the bee must be equal to the electric force. Thus;

mg = qE

100 × 10^(-6) × 9.8 = 33 × 10^(-12) × E

E = (100 × 10^(-6) × 9.8)/(33 × 10^(-12))

E = 2.97 × 10^(7) N/C

C) From Newton's law, sum of forces = 0.

Thus;

F_n + F + W = 0

Where F is the normal force.

Thus;

F_n = -(F + W)

F_n = - ((33 × 10^(-10)) + (9.8 × 10^(-4)))

F_n = -9.8 × 10^(-4) N

Thus, applied electric field is;

E_a = F_n/q = (-9.8 × 10^(-4))/(33 × 10^(-12)) = -2.97 × 10^(7) N/C

This is negative and so it means the direction will be opposite the Earth's electric filed which is upwards.

Answer:

Approximately [tex]13\; \rm g[/tex] of steam at [tex]100\; \rm ^\circ C[/tex] (assuming that the boiling point of water in this experiment is [tex]100\; \rm ^\circ C\![/tex].)

Explanation:

Latent heat of condensation/evaporation of water: [tex]2260\; \rm J \cdot g^{-1}[/tex].

Both mass values in this question are given in grams. Hence, convert the specific heat values from this question to [tex]\rm J \cdot g^{-1}[/tex].

Specific heat of water: [tex]4.2\; \rm J \cdot g^{-1}\cdot \rm K^{-1}[/tex].

Specific heat of copper: [tex]0.39\; \rm J \cdot g^{-1}\cdot K^{-1}[/tex].

The temperature of this calorimeter and the [tex]250\; \rm g[/tex] of water that it initially contains increased from [tex]20\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex]. Calculate the amount of energy that would be absorbed:

[tex]\begin{aligned}& Q(\text{copper}) \\ =\;& c \cdot m \cdot \Delta t \\ =\;& 0.39\; \rm J \cdot g^{-1}\cdot K^{-1} \times 50\; \rm g \times (50\;{\rm ^\circ C} - 20\;{\rm ^\circ C}) \\ =\; & 585\; \rm J \end{aligned}[/tex].

[tex]\begin{aligned}& Q(\text{cool water}) \\ =\;& c \cdot m \cdot \Delta t \\ =\;& 4.2\; \rm J \cdot g^{-1}\cdot K^{-1} \times 250\; \rm g \times (50\;{\rm ^\circ C} - 20\;{\rm ^\circ C}) \\ =\; & 31500\; \rm J \end{aligned}[/tex].

Hence, it would take an extra [tex]585\; \rm J + 31500\; \rm J = 32085\; \rm J[/tex] of energy to increase the temperature of the calorimeter and the [tex]250\; \rm g[/tex] of water that it initially contains from [tex]20\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex].

Assume that it would take [tex]x[/tex] grams of steam at [tex]100\; \rm ^\circ C[/tex] ensure that the equilibrium temperature of the system is [tex]50\; \rm ^\circ C[/tex].

In other words, [tex]x\; \rm g[/tex] of steam at [tex]100\; \rm ^\circ C[/tex] would need to release [tex]32085\; \rm J[/tex] as it condenses (releases latent heat) and cools down to [tex]50\; \rm ^\circ C[/tex].

Latent heat of condensation from [tex]x\; \rm g[/tex] of steam: [tex]2260\; {\rm J \cdot g^{-1}} \times (x\; {\rm g}) = (2260\, x)\; \rm J[/tex].

Energy released when that [tex]x\; {\rm g}[/tex] of water from the steam cools down from [tex]100\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex]:

[tex]\begin{aligned}Q = \;& c \cdot m \cdot \Delta t \\ =\;& 4.2\; {\rm J \cdot g^{-1}\cdot K^{-1}} \times (x\; \rm g) \times (100\;{\rm ^\circ C} - 50\;{\rm ^\circ C}) \\ =\; & (210\, x)\; \rm J \end{aligned}[/tex].

These two parts of energy should add up to [tex]32085\; \rm J[/tex]. That would be exactly what it would take to raise the temperature of the calorimeter and the water that it initially contains from [tex]20\; \rm ^\circ C[/tex] to [tex]50\; \rm ^\circ C[/tex].

[tex](2260\, x)\; {\rm J} + (210\, x)\; {\rm J} = 32085\; \rm J[/tex].

Solve for [tex]x[/tex]:

[tex]x \approx 13[/tex].

Hence, it would take approximately [tex]13\; \rm g[/tex] of steam at [tex]100\; \rm ^\circ C[/tex] for the equilibrium temperature of the system to be [tex]50\; \rm ^\circ C[/tex].

Solution :

Given expression :

[tex]$\mu_k$[/tex]mgcosθ = mgsinθ − ma

Here, g = 9.8 [tex]m/s^2[/tex] , a = 3.60 [tex]m/s^2[/tex] , θ = 27°

Therefore,

[tex]$\mu_k mg \cos \theta = mg \sin \theta - ma$[/tex]

[tex]$\mu_k mg \cos \theta = m(g \sin \theta - a)$[/tex]

[tex]$\mu_k g \cos \theta = (g \sin \theta - a)$[/tex]

[tex]$\mu_k =\frac{(g \sin \theta-a)}{g \cos \theta}$[/tex]

Mow calculating the coefficient of kinetic friction as follows :

[tex]$\mu_k=\frac{g \sin \theta-a}{g \cos \theta}$[/tex]

[tex]$\mu_k=\frac{9.8 \times \sin 27^\circ-3.60}{9.8 \times \cos 27^\circ}$[/tex]

[tex]$\mu_k=0.097$[/tex]

Answer:

wool and fibers

Explanation:

Answer:

The surface tension is 190.2 N/m.

Explanation:

Initial radius, r = 4 cm

final radius, r' = 6 cm

Work doen, W = 15 J

Let the surface tension is T.

The work  done is given by

W = Surface Tension x change in surface area

[tex]15 = T \times 4\pi^2(r'^2 - r^2)\\\\15 = T \times 4 \times 3.14\times 3.14 (0.06^2- 0.04^2)\\\\15 = T\times 0.0788\\\\T = 190.2 N/m[/tex]

Answer:

ΔV = 2 10¹ V

Explanation:

The calculation of the uncertainty or error in an expression is given by

         ΔV = [tex]\frac{dV}{di}[/tex]  |Δi| + [tex]\frac{dV}{dR}[/tex]  |ΔR |

         V = i R

let's make the derivatives

        [tex]\frac{dV}{di}[/tex] = R

        [tex]\frac{dV}{dR}[/tex] = i

we substitute

         ΔV = R | Δi | + i | ΔR |

in the exercise give the values

         i = (5.9 ± 0.4) A

         R = (42.7 ± 0.6) Ω

we calculate

          ΔV = 42.7  0.4 + 5.9  0.6

          ΔV = 20.6 V

          ΔV = 2 10¹ V

the voltage is

         V = i R

         V = 5.9  42.7

          V = 251.9 V

the result is

         V = (25 ± 2) 10¹ V

Answer:

1. Friction enables us to walk freely.

2. It helps to support ladder against wall.

3. It becomes possible to transfer one form of energy to another.

4. Objects can be piled up without slipping.

Answer:

the answer is c which is a+2 charge

Explanation:

Beryllium is in group 2A. It's nearest noble gas is Helium, which is 2 elements behind Beryllium. ThBeryllium wants to lose two electrons. When it does that, Beryllium will have a positive chargeof two, and it will be stated as B-e two plus.

The Beryllium (Be) has an atomic number of 4 and belongs to Group-2 elements. The Beryllium will form a divalent cation (+2). Thus, option C is correct.

In an atom, the number of electrons equals the number of protons. If the electrons are removed from the atom or the electrons are added to the atom, the atom has an excessive positive or negative charge.

This excessive of electrons or lack of electrons forms Ions. The excess of electrons has a negative charge or anions and the lack of electrons has a positive charge or cations.

Beryllium has 4 electrons. Two electrons are occupied in the valence shell of beryllium. Group 2 elements always form the positive ions or cations, to become stable ions.

The outermost shell of beryllium has two electrons. In order to form a stable ion, beryllium should lose its two electrons or gain six electrons. Beryllium belongs to the Group-2 element, it always loses two electrons and forms Be²⁺, to form a stable ion.

Hence, Beryllium forms an ion with a +2 charge. Thus, the correct option is C.

To learn more about the Cations and Anions:

https://brainly.com/question/980691

#SPJ5

Answer:

the largest distance we can measure is 10¹⁴ km

Explanation:

Given the data in the question;

Threshold hearing = 10⁻²⁰

smallest distance measured = 1 mm

Largest distance measured will be;

⇒ ( threshold hearing )⁻¹ × smallest distance

= ( 1 / 10⁻²⁰ ) × 1 mm

= 10²⁰ × 1mm

= 10²⁰ mm

we know that; 1000 mm = 10⁶ km

Largest distance = ( 10²⁰ / 10⁶ ) km

= 10¹⁴ km

Therefore, the largest distance we can measure is 10¹⁴ km

Answer:

The range of the photon energies is between:

2.652 x 10⁻²⁵ J    to    4.973 x 10⁻²⁵ J

Explanation:

The energy of a photon is calculated using the following equation;

E = hf

where;

h is Planck's constant = 6.63 x 10⁻³⁴ Js

f is frequency of the photon

[tex]E = h \frac{c}{\lambda} \\\\where;\\\\\lambda \ is \ the \ wavelength\\\\c \ is \ the \ speed \ of \ light \ = 3\times 10^8 \ m/s\\\\When \ \lambda = 400 \ mm = 400 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{400 \times 10^{-3}} \\\\E = 4.973 \times 10^{-25} \ J[/tex]

[tex]When \ \lambda = 750 \ mm = 750 \ \times 10^{-3} \ m\\\\E = \frac{(6.63 \times 10^{-34})(3\times 10^8)}{750 \times 10^{-3}} \\\\E = 2.652 \times 10^{-25} \ J[/tex]

The range of the photon energies is between:

2.652 x 10⁻²⁵ J    to    4.973 x 10⁻²⁵ J

Answer:

[tex]{ \tt{initial \: velocity, \: u = 0}} \: (at \: rest) \\ { \tt{final \: velocity, \: v = 15 { {ms}^{ - 1} }}} \\ { \tt{time, \: t = 6s}} \\ { \bf{from \: first \: newtons \: equation \: of \: motion : }} \\ { \bf{v = u + at}} \\ { \tt{15 = 0 + (a \times 6)}} \\ { \tt{6a = 15}} \\ { \tt{acceleration, \: a = 2.5 \: {ms}^{ - 2} }}[/tex]

Work done by  man will be A. 640 J

The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.

according to work energy theorem

Work done = final Kinetic energy - initial kinetic energy

                   = KE (final) - KE (initial )

                   = 1/2 m ([tex]v^{2}[/tex])  - 1/2 m ([tex]u^{2}[/tex])

                  = 1/2 m ([tex]v^{2}[/tex] - [tex]u^{2}[/tex])

                  = 1/2 * 500 * ( [tex]2^{2}[/tex] - [tex]1.2^{2}[/tex])

                  = 250 * 2.56 = 640 J

correct answer is A. 640 J

learn more about work energy theorem

https://brainly.com/question/10063455?referrer=searchResults

#SPJ2

Answer:Increasing

Explanation:

Given

Car is driven on the straight road with  instantaneous acceleration in the direction of car's motion.

If instanateneous acceleration is constant then speed of car is increasing at a constant pace. As there are no turns on the road, therefore speed of car is increasing.

The speed of the car is "decreasing". A further description is provided in the below paragraph.

Thus the above answer is correct.

Learn more about the speed here:

https://brainly.com/question/5053192