Answers
Answer:
The answer would be B. 1 joule/s.
Explanation:
The answer is B because the power in general is normally defined as energy over time. Watts are defined as 1 Watt = 1 Joule per second (1W = 1 J/s) which means that 1 kW = 1000 J/s.
Another reason why it's B is because I had the same exact question in class, I took a screenshot of it a day ago:
Hope this helps
Related Questions
If aqueous solutions of Ba(OH)2 and HNO3 are mixed, what products are formed? Select one: a. BaN2(s) + H2O(l) b. Ba(NO3)2(aq) + H2O(l) c. Ba(s) + H2(g) + NO2(g) d. Ba2O(s) + NO2(g) + H2O(l) e. Ba3N2(s) + H2O(l)
Answers
Answer: Ba(NO3)2(aq) + H2O(l)
Explanation:
How is water used in society
Answers
Answer:
Water can be used for direct and indirect purposes. Direct purposes include bathing, drinking, and cooking, while examples of indirect purposes are the use of water in processing wood to make paper and in producing steel for automobiles. The bulk of the world's water use is for agriculture, industry, and electricity.
Explanation:
Answer:
water is used for drinking, bathing, cooking, agriculture etc
A 50.0 mL sample of an aqueous H2SO4 solution is titrated with a 0.375 M NaOH solution. The equivalence point is reached with 62.5 mL of the base. The concentration of H2SO4 is ________ M. A 50.0 mL sample of an aqueous H2SO4 solution is titrated with a 0.375 M NaOH solution. The equivalence point is reached with 62.5 mL of the base. The concentration of H2SO4 is ________ M. 0.150 0.234 0.300 0.469 0.938
Answers
Answer: The concentration of [tex]H_2SO_4[/tex] is 0.234 M
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]H_2SO_4[/tex] = 2
[tex]M_1[/tex] = molarity of [tex]H_2SO_4[/tex] solution = ?
[tex]V_1[/tex] = volume of [tex]H_2SO_4[/tex] solution = 50.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 0.375 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = 62.5 ml
Putting in the values we get:
[tex]2\times M_1\times 50.0=1\times 0.375\times 62.5[/tex]
[tex]M_1=0.234M[/tex]
Therefore concentration of [tex]H_2SO_4[/tex] is 0.234 M
One gallon of gasoline (C8H18) weights about 6.3 pounds. Burning gasoline with excess of oxygen forms water and carbon dioxide. When 3.1 gallons of gasoline burn, how many pounds of CO2 emit into the air?
FW: C = 12; H = 1; O = 16.
Answers
Answer:
60 pounds of CO₂ are emited into the air
Explanation:
The combustion of gasoline occurs as follows:
C₈H₁₈(l) + 25/2O₂(g) ⇄ 8CO₂(g) + 9H₂O
Where 1 mole of gasoline produce 8 moles of CO₂
To solve this question we must find the moles of gasoline in 3.1 gallons. 8 times these moles are the moles of CO₂ produced. With the moles of CO₂ we can find its pounds as follows:
Pounds gasoline:
3.1 gallons * (6.3 pounds / gallon) = 19.53 pounds
Grams gasoline:
19.53 pounds * (453.592g / pound) = 8859g
Moles gasoline -Molar mass C8H18: 114.23g/mol-
8859g * (1mol / 114.23g) = 77.55 moles gasoline
Moles CO₂:
77.55 moles gasoline * (8 mol CO₂ / mol Gasoline) = 620.4 moles CO₂
Mass CO₂ - Molar mass: 44.01g/mol-
620.4 moles CO₂ * (44.01g / mol) = 27304g CO₂
Pounds CO₂:
27304g CO₂ * (1lb / 453.592g) =
60 pounds of CO₂ are emited into the air10) Is the chemical equation balanced?
2 Al + Fe2O3
2Fe + Al2O3
Answers
Answer: Yes , the equation is balanced.
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The given chemical equation is:
[tex]2Al+Fe_2O_3\rightarrow 2Fe+Al_2O_3[/tex]
As the number of atoms on reactant side is equal to the number of atoms on product side, the equation is balanced.
24. A wave has a speed of 50 m/sec. If its frequency is 100 Hz,
what is its wavelength?
Answers
Answer:
I guess
Wave speed= Frequency x Wavelength
-> Wavelength= Wave speed divide Frequency
-> 50m/s divide 100Hz= 0.5m
I hope it help! :)
In the process of photosynthesis, sunlight is converted into
Answers
Answer:
Chemical energy
Explanation:
By the use of electrons and protons from water
Answer:
chemical energy
Explanation:
Photosynthesis is the process by which organisms that contain the pigment chlorophyll convert light energy into chemical energy which can be stored in the molecular bonds of organic molecules (e.g., sugars). Photosynthesis powers almost all trophic chains and food webs on the Earth.
How many mL of 0.100M Ca(OH) are needed to titrate 20.0mL of 0.300M H2SO4
Answers
Answer:
60.0 mL
Explanation:
Using CAVA = CBVB
CA = 0.300M
VA = 20.0 mL
CB = 0.100M
VB = ?
VB = CAVA
CB
VB = 0.300 * 20/ 0.100
VB = 60.0 mL
Question 3
Which of the objects on the shelf has the greatest inertia?
10 kg
5 kg
2kg
a
b
2 kg
5 kg
10 kg
С
d
The all have the same inertia
Answers
Which of these is most likely made of pieces of rock that are weathered by water and wind?
O A diamonds
OB sand
OC grass
OD vegetables
Answers
Answer:
The answer would be sand.
Explanation:
Sand is weathered down tiny pieces of rock. Sand flows down rivers to shores and slowly builds up to form beaches.
Answer:
The Answer is gonna be B sand
7. Which of the following is a proof that light travels in a straight line?
A. Formation of clouds
C. Formation of rainbows
B. Formation of colors
D. Formation of shadow
Answers
Answer:
formation of shadow is right
Answer:
correct answer is D
Explanation:
When you see a shadow, it is directly behind the object.
C3H8, + 5O2
+ 5O2,3CO2 + 4H20
If 2.50 moles of C3H8react, how many moles of H20 are produced?
Answers
Answer:
[tex]from \: the \: equation \\ 1 \: moles \: of \: propane \: produce \: 4 \: moles \: of \: water \\ 2.50 \:moles \: of \: propane \: will \: produce \: ( \frac{(2.50 \times 4)}{1} ) \: moles \\ = 10 \: moles \: of \: water[/tex]
8. The density of a gas at 350 C is 0,087 g/L. Compute the density at STP.
Answers
Answer:
0.20 g/L
Explanation:
Step 1: Calculate the molar mass of the gas (M)
At T = 350 °C = 623 K and P = 1 atm (we will assume this data), the density (ρ) of the gas is 0.087 g/L. We can calculate the molar mass of the gas using the following expression.
ρ = P × M/R × T
M = ρ × R × T/P
M = 0.087 g/L × (0.0821 atm.L/mol.K) × 623 K/1 atm = 4.5 g/mol
Step 2: Calculate the density of the gas at STP
At standard temperature (T = 273.15 K) and standard pressure (P = 1 atm), the density of the gas is:
ρ = P × M/R × T
ρ = 1 atm × 4.5 g/mol /(0.0821 atm.L/mol.K) × 273.15 K = 0.20 g/L
Is anyone good at chemistry if so can someone help me please ?
(NO LINKS)
Question 15
Answers
We're given the [OH⁻] as 8.34 × 10⁻¹² M. Using the formula pOH = -log[OH⁻], the pOH of this solution would be -log(8.34 × 10⁻¹²) ≈ 11.08.
The pOH is, for lack of a better term, the "opposite" of pH: A pOH of 7 is neutral; a pOH less than 7 is basic; and a pOH greater than 7 is acidic.
This follows from the relation, pH + pOH = 14. In this case, with a pOH of 11.08, our pH would be 14 - 11.08 = 2.92, which is acidic (pH < 7).
Thus, the correct answer choice is B.
It takes 53.0 J to raise the temperature of an 11.0 g piece of unknown metal from 13.0∘C to 24.3 ∘C. What is the specific heat for the metal?
Answers
Answer:
Heat absorbed = mS△T
51 = ( 8.2/1000)Kg ×S (11.5)
51×1000= 8.2 (11.5)S
S = 51000/94.3
S = 540.8 J/kg K
A mixture of NO2 and N2O4 gas is at equilibrium in a closed container. These gases react with the equation 2NO2 ⇌ N2O4. What will happen if the size of the container is increased?
Answers
Answer:
Equilibrium will shift leftwards towards NO2.
Explanation:
Hello there!
In this case, according to the Le Cha telier's principle, it is possible to realize that the increase of the volume turns out in the shift towards the most of the gaseous moles are in; in such a way, for the given chemical reaction, we can notice how NO2 (reactant side) has the most of the moles (2 moles in comparison to 1 mole of N2O4); and therefore, by increasing the volume, the equilibrium will shift to it, it means leftwards.
Best regards!
Put the steps of the carbon cycle in order using Step 1 as your starting point.
Step 1: Bacteria, through nitrogen fixation and nitrification, convert nitrogen into a usable form.
The animal dies and decomposes, returning nitrogen back to the soil.
Once nitrogen is in usable form, it is taken up by plants and assimilated into proteins..
An animal eats a plant and the nitrogen becomes part of the animal’s proteins.
Answers
Answer:
Carbon moves from the atmosphere to plants. ...
Carbon moves from plants to animals. ...
Carbon moves from plants and animals to soils. ...
Carbon moves from living things to the atmosphere. ...
Carbon moves from fossil fuels to the atmosphere when fuels are burned. ...
Carbon moves from the atmosphere to the oceans.
Explanation:
Answer:
step 4 , 2 , 3
Explanation:
Worth 100 points plus ill mark brainliest
How many grams of sodium phosphate ( Na₃PO₄ )are required to make 125 milliliters of a 0.240 Molar solution?
4.92
6.48
8.44
12.5
Answers
Answer:
4.92 grams of sodium phosphate (Na₃PO₄) are required to make 125 milliliters of a 0.240 M.
Explanation:
Molarity is a measure of concentration that indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
Molarity= 0.240 Mnumber of moles= ?volume= 125 mL= 0.125 LReplacing in the definition of molarity:
[tex]0.240 M=\frac{number of moles}{0.125 L}[/tex]
Solving:
number of moles= 0.240 M*0.125 L
number of moles= 0.03 moles
Being the molar mass of sodium phosphate 164 g/mole, that is, the mass of one mole of the compound, you can calculate the mass of 0.03 moles using the following rule of three: if 1 mole of the compound has 164 grams, 0.03 moles contains how much mass?
[tex]mass=\frac{0.03 moles*164 grams}{1 mole}[/tex]
mass= 4.92 grams
4.92 grams of sodium phosphate (Na₃PO₄) are required to make 125 milliliters of a 0.240 M.
The oxidation state for Cl is A. -1 as a reactant and +1 as a product B. -1 as a reactant and 0 as a product C. -1 as a reactant and -1 as a product D. +1 as a reactant and +1 as a product
Answers
Answer:
no sure
Explanation:
Explain in detail how low density polyethylene is made
Answers
Answer:
Low-density polyethylene is manufactured by the process of the polymerization of ethylene at very high temperatures in a tubular reactor. In this tubular reactor, high-pressure polymerization allows further copolymerization of ethylene with polar co-monomers. The tubular process has an advantage over autoclave process.
Explanation:
please mark brainliest
What is the molar mass of AlCl3
Answers
Answer:
133.34 g/moles
Explanation:
but to make life easy it could be 133.4 g/ moles as well
What is the molarity (M) of a solution that has 0.50 moles of solute dissolved in 1.0
liter of solution?
Answers
Answer:
it is 0.50=0.5 M
Explanation:
Molarity definition is measure the concentration of solution.
and the rule is
molarity(M)= moles of solute/volume of solution in liters
Ex: 2.1 M MgCl2= 2.1 mole MgCl2/ L MgCl2 solution
where do the sun rays hit Earth's surface nearly at right angles
Answers
Answer:
The Sun Ray's hit earths surface at Earths Equator
Like in a cat's eye, the human pupil changes shape in response to changes in
the environment. What is the most likely function of this structure?
A. To allow humans to read
B. To allow humans to see clearly in different levels of light
C. To allow humans to see shades in color
D. To allow humans to see at varying distances
Answers
Answer:
B.
Our pupils contract and expand depending on the amount of light at any given time in order to avoid being blinded and to see better in the darkness.
Which of the following astronomical bodies would most likely be the largest?
1. A dwarf star from a nearby solar system
2. A comet
3. One of the gas giants in our solar system
4. Ganymede, the largest moon of Jupiter
Answers
Answer:
1
because a dwarf star will seemlarge because of the in ability of any human being to see d sun
Calculate the number of total atoms in 195 grams of Ni(OH)2.
Answers
1.267 x 10 ^ 24 is the total number of atoms
Calculate the enthalpy change for the photosynthesis of gluclose
Answers
Answer:
jhdgafhgafhagfhafg
Explanation:
Please balance the equation C7H16 + CoF3 = C7F16 + HF +CoF2
with solutions
b. how many grams of CH6 is needed to react with 20.0 grams of HF?
C. how many particles of CoF3 is needed to react with 40.0 grams of CzF16?
d. how many grams of CH16 will be produce from 2.03 x 10 molecule of CoFs?
e. Find the Limiting reactant and exXcess reactant in CF16?
6g of CH16
6g of CoFa
f. Find the theoretical yield from CzFi6?
g. What is the percent yield of C;F16 if the actual yield is 1.28 g ?
Answers
3.A binary mixture consisting of 50.7 mol % n-butane (1) and the balance iso-butane (2) enters a flash chamber operating at 9.6 bar and 344 K. Use the truncated virial equation of state (equation 3.36 in the textbook) to estimate the composition of the vapor and liquid phases leaving the flash chamber.
Answers
Please Need help asap
For Al, its atomic number is 13 and its mass number is 27. How many neutrons does it have?
А. 13
B. 14
C. 26
D. 27
E. 40
Answers
Answer:
A
Explanation:
The number of protons and neutrons of an element is the same. the electrons are the only thing that can differ. The atomic number equal the protons and neutrons.
