A windmill on a farm rotates at a constant speed and completes one-half of a rotation in 0.5 seconds. What is its rotation speed

Answers

Answer 1

Answer:

v = 6.28 m/s

Explanation:

It is given that,

A windmill on a farm rotates at a constant speed and completes one-half of a rotation in 0.5 seconds,

Number of revolution is half. It means angular velocity is 3.14 radians.

Let v is the angular speed. So,

[tex]v=\dfrac{\omega}{t}\\\\v=\dfrac{3.14}{0.5}\\\\v=6.28\ m/s[/tex]

So, the rotation speed is 6.28 m/s.

Answer 2

The angular velocity is the rotation speed, which is the angle of rotation

of the windmill per second, which is 2·π radians.

Response:

The rotation speed is 2·π rad/s

How can the rotational speed of the windmill be calculated?

The given parameter are;

The angle of rotation the windmill rotates in 0.5 seconds = One-half a

rotation.

Required:

The rotational speed (angular velocity)

Solution:

The angle of one rotation = 2·π radians

Angle of one-half ration = [tex]\frac{1}{2}[/tex] × 2·π radians = π radians

[tex]Rotational \ speed = \mathbf{\dfrac{Angle \ of \ rotation}{Time}}[/tex]

Which gives;

[tex]Rotational \ speed, \omega = \dfrac{\pi}{0.5 \ s} = \mathbf{2 \cdot \pi \ rad/s}[/tex]

The rotation speed is 2·π rad/s

Learn more about rotational speed here:

https://brainly.com/question/6969329


Related Questions

g One of the harmonics in an open-closed tube has frequency of 500 Hz. The next harmonic has a frequency of 700 Hz. Assume that the speed of sound in this problem is 340 m/s. a. What is the length of the tube

Answers

Answer:

The length of the tube is 85 cm

Explanation:

Given;

speed of sound, v = 340 m/s

first harmonic of open-closed tube is given by;

N----->A , L= λ/₄

λ₁ = 4L

v = Fλ

F = v / λ

F₁ = v/4L

Second harmonic of open-closed tube is given by;

L = N-----N + N-----A, L = (³/₄)λ

[tex]\lambda = \frac{4L}{3}\\\\ F= \frac{v}{\lambda}\\\\F_2 = \frac{3v}{4L}[/tex]

Third harmonic of open-closed tube is given by;

L = N------N + N-----N + N-----A, L = (⁵/₄)λ

[tex]\lambda = \frac{4L}{5}\\\\ F= \frac{v}{\lambda}\\\\F_3 = \frac{5v}{4L}[/tex]

The difference between second harmonic and first harmonic;

[tex]F_2 -F_1 = \frac{3v}{4L} - \frac{v}{4L}\\\\F_2 -F_1 = \frac{2v}{4L} \\\\F_2 -F_1 =\frac{v}{2L}[/tex]

The difference between third harmonic and second harmonic;

[tex]F_3 -F_2 = \frac{5v}{4L} - \frac{3v}{4L}\\\\F_3 -F_2 = \frac{2v}{4L} \\\\F_3 -F_2 =\frac{v}{2L}[/tex]

Thus, the difference between successive harmonic of open-closed tube is

v / 2L.

[tex]700H_z- 500H_z= \frac{v}{2L} \\\\200 = \frac{v}{2L}\\\\L = \frac{v}{2*200} \\\\L = \frac{340}{2*200}\\\\L = 0.85 \ m\\\\L = 85 \ cm[/tex]

Therefore, the length of the tube is 85 cm

A sinusoidal voltage Δv = (100 V) sin (170t) is applied to a series RLC circuit with L = 40 mH, C = 130 μF, and R = 50 Ω.

Required:
a. What is the impedance of the circuit?
b. What is the maximum current in the circuit?

Answers

Answer:

See attached file

Explanation:

A spherical balloon has a radius of 6.95 m and is filled with helium. The density of helium is 0.179 kg/m3, and the density of air is 1.29 kg/m3. The skin and structure of the balloon has a mass of 950 kg. Neglect the buoyant force on the cargo volume itself. Determine the largest mass of cargo the balloon can lift. Express your answer to two significant figures and include the appropriate units.

Answers

volume of balloon

= 4/3 T R3

= 4/3 x 3.14 x 6.953

= 1405.47 m3

uplift force

= volume of balloon x density of air x 9.8

= = 1405.47 x 1.29 x 9.8

= 1813.05 x 9.8 N

weight of helium gas

= volume of balloon x density of helium x

9.8

= 1405.47 x .179 x 9.8

= 251.58 x 9.8 N

Weight of other mass = 930 x 9.8 N Total weight acting downwards

= 251.58 x 9.8 +930 x 9.8

= 1181.58 x 9.8 N

If W be extra weight the uplift can balance

1181.58 × 9.8 + W × 9.8 = 1813.05 * 9.8

1181.58+W=1813.05

W= 631.47 kg

What is the emf of this cell under standard conditions? Express your answer using three significant figures.

Answers

Complete Question

A voltaic cell utilizes the following reaction and operates at 298 K:

3Ce4+(aq)+Cr(s)→3Ce3+(aq)+Cr3+(aq).

What is the emf of this cell under standard conditions? Express your answer using three significant figures.

Answer:

The value is [tex]E^o_{cell} = 2.35 V[/tex]

Explanation:

From the question we are told that

   The ionic equation is  

               [tex]3 Ce^{4 +} _{(aq)} + Cr _{(s)} \to 3 Ce^{3+} _{(aq)} + Cr^{3r} _{(aq)}[/tex]

Now under standard conditions the reduction  half reaction  is

      [tex]Ce^{4+} + e \to Ce^{3+} ; \ \ E^o_r = 1.61 V[/tex]

And the oxidation half reaction is

      [tex]Cr^{3+} + 3e^{-} \to Cr ; \ \ \ E^o_o = - 0.74 V[/tex]

The emf of this cell under standard conditions  is mathematically represented as

     [tex]E^o_{cell} = E^o _r - E^o _o[/tex]

substituting values

     [tex]E^o_{cell} = 1.61 - (- 0.74)[/tex]

    [tex]E^o_{cell} = 2.35 V[/tex]

     

A bungee cord with a spring constant of 800 StartFraction N over m EndFraction stretches 6 meters at its greatest displacement. How much elastic potential energy does the bungee cord have? The bungee cord has J of elastic potential energy.

Answers

Explanation:

EE = ½ kx²

EE = ½ (800 N/m) (6 m)²

EE = 14,400 J

Answer:

14,400 J

Explanation:

Its the answer

In the summer of 2010 a huge piece of ice roughly four times the area of Manhattan and 500 m thick caved off the Greenland mainland.

Required:
a. How much heat would be required to melt this iceberg (assumed to be at 0°C) into liquid water at 0°C?
b. The annual U.S. energy consumption is 1.2 x 10^20 J. If all the U.S. energy was used to melt the ice, how many days would it take to do so?

Answers

Answer:

a

  [tex]Q = 5.34 *10^{19} \ J[/tex]

b

   [tex]T = 0.445 * 365 = 162. 413 \ days[/tex]

Explanation:

From the question we are told that

     The  area of  Manhattan is  [tex]a_k = 87.46 *10^{6} \ m^2[/tex]

      The area of the ice is [tex]a_i = 4* 87.46 *10^{6 } = 3.498 *10^{8}\ m^2[/tex]

        The  thickness is  [tex]t = 500 \ m \\[/tex]

       

Generally the volume of the ice is mathematically represented is

         [tex]V = a_i * t[/tex]

substituting value

         [tex]V = 500 * 3.498*10^{8}[/tex]

         [tex]V = 1.75 *10^{11}\ m^3[/tex]

Generally the mass of the ice is

       [tex]m_i = \rho_i * V[/tex]

Here [tex]\rho_i[/tex] is the density of ice the value is  [tex]\rho _i = 916.7 \ kg/m^3[/tex]

=>   [tex]m_i = 916.7 * 1.75*10^{11}[/tex]

=>    [tex]m_i = 1.60 *10^{14} \ kg[/tex]

Generally the energy needed for the ice to melt is mathematically represented as

        [tex]Q = m _i * H_f[/tex]

Where [tex]H_f[/tex] is the latent heat of fusion of ice and the value is  [tex]H_f = 3.33*10^{5} \ J/kg[/tex]

=>    [tex]Q = 1.60 *10^{14} * 3.33*10^{5}[/tex]

=>    [tex]Q = 5.34 *10^{19} \ J[/tex]

Considering part b

  We are told that the annual energy consumption is  [tex]G = 1.2*10^{20 } \ J / year[/tex]

So  the time taken to melt the ice is

      [tex]T = \frac{ 5.34 *10^{19}}{ 1.2 *10^{20}}[/tex]

        [tex]T = 0.445 \ years[/tex]

converting to days

      [tex]T = 0.445 * 365 = 162. 413 \ days[/tex]

Why was Bohr's atomic model replaced by the
modern atomic model?

Answers

Answer:

Explanation:

Bohr's atomic model was replaced by the  modern atomic model because of its limitations, which included :

(a) Only applicable for Hydrogen and like atoms ( He+1, Li+2 )

(b) Couldn't explain Zeeman Effect (splitting of spectral lines due external magnetic field ) and Stark Effect (splitting of spectral lines due to external electric field).

(c) Inconsistent with De-Broglie's Dual nature of matter and Heisenberg Uncertainty principal, etc.

A 120-V rms voltage at 60.0 Hz is applied across an inductor, a capacitor, and a resistor in series. If the peak current in this circuit is 0.8484 A, what is the impedance of this circuit?
A) 200 Ω
B) 141 Ω
C) 20.4 Ω
D) 120 Ω
E) 100 Ω

Answers

Answer:A  200

Explanation:

Vp=1.41*Vrms

Vp=169.7 v

Z=Vp/Ip

Z=169.7/.8484

Z=200.03 ohm

A sample of gas is enclosed in a container of fixed volume. Identify which of the following statements are true. Check all that apply.If the container is heated, the gas particles will lose kinetic energy and temperature will increase.

Answers

Answer:

B. If the container is cooled, the gas particles will lose kinetic energy and temperature will decrease.

C. If the gas particles move more quickly, they will collide more frequently with the walls of the container and pressure will increase.

E. If the gas particles move more quickly, they will collide with the walls of the container more often and with more force, and pressure will increase.

#FreeMelvin

A positive point charge q is placed at the center of an uncharged metal sphere insulated from the ground. The outside of the sphere is then grounded as shown. Then the ground wire is removed. A is the inner surface and B is the outer surface. Which statement is correct

Answers

Explanation:

the missing figure in the Question has been put in the attachment.

Then from the figure we can observe that

the center of the sphere is positive, therefore, negative charge will be  induced at A.

As B is grounded there will not be any charge on B

Hence the answer is A is negative and B is charge less.

There is a river in front of you that flows due South at 3.0m/s. You launch a toy boat across the river with the front of the boat pointed due East. When you tested the boat on a still pond, the boat moved at 4.0m/s. Now as it moves to the opposite bank, it travels at some speed relative to you, sitting in your chair. What is this speed

Answers

Answer:

5.0 m/s

Explanation:

If the river moves towards the south at 3m/s and the both moves towards the east at 4.0m/s, the speed of the boat relative to me will be the resulting displacement of both velocities of the river and that of the boat. This can be gotten using pythagoras theorem.

Let Vr be the relative speed. According to the theorem;

[tex]V_r^2 = V_s^2 + V_e^2\\\\V_r^2 = 3.0^2 + 4.0^2\\\\V_r^2 = 9+16\\\\V_r^2 = \sqrt{25}\\ \\V_r = 5.0m/s[/tex]

Hence this relative speed is 5.0 m/s

A mass weighing 16 pounds stretches a spring 8 3 feet. The mass is initially released from rest from a point 6 feet below the equilibrium position, and the subsequent motion takes place in a medium that offers a damping force that is numerically equal to 1 2 the instantaneous velocity. Find the equation of motion x(t) if the mass is driven by an external force equal to f(t)

Answers

Answer:I don’t know

Explanation:

For a beam of light in air (n = 1) reflecting off glass (n = 1.5), what is Brewster's angle to the nearest degree?

Answers

Answer: 56°

Explanation:

Brewster's angle refers to the angle at the point where light of a certain polarization passes through a transparent dielectric surface and is transmitted perfectly such that no reflection is made.

The formula is;

[tex]= Tan^{-1} (\frac{n_{2} }{n_{1}} )[/tex]

[tex]= Tan^{-1} (\frac{1.5 }{1} )[/tex]

= 56.30993247

= 56°

The concentration of sodium and potassium ions in the blood and body fluid is regulated by :

Answers

Answer:

Kidney

Explanation:

One of the main function of the kidney is to maintain the homeostasis of sodium and potassium ions in the blood and body.

Aldosterone is a key steroid hormone that balances sodium and potassium ions in the blood and body fluid. Potassium and sodium ions generate electric impulse in the body which helps to perform different activities such as muscles flexing.

Kidney function for reabsorption and secretion, in which reabsorption of Na is done nd balances the sodium and potassium in the blood and body.

The four wheels of a car are connected to the car's body by spring assemblies that let the wheels move up and down over bumps and dips in the road. When a 68 kg (about 150 lb) person sits on the left front fender of a small car, this corner of the car dips by about 1.2 cm (about 1/2 in).

If we treat the spring assembly as a single spring, what is the approximate spring constant?

k= ____________

Answers

Answer:

The approximate  spring constant is  [tex]k = 55533.33 \ N/m[/tex]

Explanation:

From the question we are told that

   The  mass of the person is  [tex]m = 68 \ kg[/tex]

     The  dip of the car is  [tex]x = 1.2 \ cm = 0.012 \ m[/tex]

Generally according to hooks law  

        [tex]F = k * x[/tex]

here the force F is the weight of the person which is mathematically represented as

         [tex]F = m * g[/tex]

=>    [tex]m * g = k * x[/tex]

=>     [tex]k = \frac{m * g }{x }[/tex]

=>    [tex]k = \frac{68 * 9.8}{ 0.012}[/tex]

=>   [tex]k = 55533.33 \ N/m[/tex]

A 1.5 V battery is connected to a 1000 ohm resistor and a 500 ohm resistor in series. The voltage across the 1000 ohm resistor is _____ V.

Answers

Answer:

1 volt and 0.5 volt

Explanation:

Given data

voltage supplied Vs= 1.5 volts

resistance R1= 1000 ohms

resistance R2= 500 ohms

The total resistance is

Rt= 1000+ 500

Rt= 1500 ohms

The current I is given as

[tex]I= \frac{Vs}{Rt} \\\\ I= \frac{1.5}{1500} = 0.001mA[/tex]

Voltage across R1

[tex]VR1= Vs(\frac{R1}{R1+R2} )=1.5(\frac{1000}{1000+500} )= 1.5(\frac{1000}{1500} )\\ \\\ VR1= 1v[/tex]

Voltage across R2

[tex]VR2= Vs(\frac{R2}{R1+R2} )=1.5(\frac{500}{1000+500} )= 1.5(\frac{500}{1500} ) \\\ VR2=0.5v[/tex]

In series connection the current is the same for all components while the voltage divides across all components,the voltages consumed by each individual resistance is equal to the source voltage.

Monochromatic light of wavelength, λ is traveling in air. The light then strikes a thin film having an index of refraction n1 that is coating a material having an index of refraction n2. If n1 is larger than n2, what minimum film thickness will result in minimum reflection of this light?

Answers

Answer:

tmin= lambda/2

Explanation:

See attached file pls

a ball is kicked on level ground with a speed of 30 m/s at angle of 40 degrees above horizontal g Find the minimum velocity of the ball during its flight

Answers

Answer:

The minimum velocity of the ball during its flight is 22.98 m/s.

Explanation:

The velocity of the ball v = 30 m/s

The angle it makes with the horizontal ∅ = 40°

The minimum velocity of the ball during flight will be the horizontal axis component of the velocity, as acceleration is zero on this axis.

[tex]V_{x}[/tex] = v cos ∅

[tex]V_{x}[/tex]  = 30 cos 40°

[tex]V_{x}[/tex] = 30 x 0.766 = 22.98 m/s

A professor, with dumbbells in his hands and holding his arms out, is spinning on a turntable with an angular velocity. What happens after he pulls his arms inwards

Answers

Answer:

His angular velocity will increase.

Explanation:

According to the conservation of rotational momentum, the initial angular momentum of a system must be equal to the final angular momentum of the system.

The angular momentum of a system = [tex]I[/tex]'ω'

where

[tex]I[/tex]' is the initial rotational inertia

ω' is the initial angular velocity

the rotational inertia = [tex]mr'^{2}[/tex]

where m is the mass of the system

and r' is the initial radius of rotation

Note that the professor does not change his position about the axis of rotation, so we are working relative to the dumbbells.

we can see that with the mass of the dumbbells remaining constant, if we reduce the radius of rotation of the dumbbells to r, the rotational inertia will reduce to [tex]I[/tex].

From

[tex]I[/tex]'ω' = [tex]I[/tex]ω

since [tex]I[/tex] is now reduced, ω will be greater than ω'

therefore, the angular velocity increases.

what conventions are used in SI to indicate units

Answers

Answer:

Conventions used in SI to indicate units are as follows:

Only singular form of units are used. for example: use kg and not kgs.Do not use full stop after the abbreviations of any unit. for example: do not use kg. or cm.Use one space between last numeric digit and SI unit. for example: 10 cm, 9 km.Symbols and words should not be mixed. for example: use Kilogram per cubic and not kilogram/m3.While writing numerals, only the symbols of the units should be written. for example: use 10 cm and not Ten cm.Units named after a scientist should be written in small letters. for example: newton, henry.Degree sign should not be used when the kelvin unit is used. for exmaple: use 37° and not 37°k

The location of a particle is measured with an uncertainty of 0.15 nm. One tries to simultaneously measure the velocity of this particle. What is the minimum uncertainty in the velocity measurement. The mass of the particle is 1.770×10-27 kg

Answers

Answer:

198 ms-1

Explanation:

According to the Heisenberg uncertainty principle; it is not possible to simultaneously measure the momentum and position of a particle with precision.

The uncertainty associated with each measurement is given by;

∆x∆p≥h/4π

Where;

∆x = uncertainty in the measurement of position

∆p = uncertainty in the measurement of momentum

h= Plank's constant

But ∆p= mΔv

And;

m= 1.770×10^-27 kg

∆x = 0.15 nm

Making ∆v the subject of the formula;

∆v≥h/m∆x4π

∆v≥ 6.6 ×10^-34/1.770×10^-27 × 1.5×10^-10 ×4×3.142

∆v≥198 ms-1

A swimmer is treading water with their head above the surface of a pool and sees a penny at the bottom of the pool 5.0 mm below. How deep does the coin appear to be? (Index of refraction of water = 1.33) [Conceptual note: Does the coin appear to be shallower or deeper?]

Answers

Answer:

The  apparent depth is  [tex]D' = 0.00376 \ m[/tex]

Explanation:

From the question we are told that

     The  depth of the water is  [tex]D = 5.0 \ mm = 5.0 *10^{-3} \ m[/tex]

      The  refractive index of water is  [tex]n = 1.33[/tex]

     

Generally the apparent depth of the coin is mathematically represented as

          [tex]D' = D * [\frac{ n_a}{n} ][/tex]

Here  [tex]n_a[/tex]  is the refractive index of  air the value is  [tex]n_a = 1[/tex]

So

        [tex]D' = 5.0 *10^{-3} * [\frac{1}{1.33} ][/tex]

        [tex]D' = 0.00376 \ m[/tex]

The apparent depth will be 0.00376 m.

What is an index of refraction?

The index of refraction of a substance also known as the refraction index is a dimensionless quantity that specifies how quickly light passes through it in optics.

d is the depth of the water =5.0 mm =5.0 ×10⁻³

n is the refractive index of water =1.33

[tex]\rm n_a[/tex] is the refractive index of wire=1

The apparent depth of the coin is given as;

[tex]\rm D'=D \times \frac{n_a}{n} \\\\ \rm D'=5.0 \times 10^{-3} \times \frac{1}{1.33} \\\\ \rm D'=0.00376 \ m[/tex]

Hence the apparent depth will be 0.00376 m.

To learn more about the index of refraction refer to the link;

https://brainly.com/question/23750645

A soccer ball of mass 0.4 kg is moving horizontally with a speed of 20 m/s when it is kicked by a player. The kicking force is so large that the ball flies up at an angle of 30 degrees above the ground. The player however claims (s)he aimed her/his foot at a 40 degree angle above the ground. Calculate the average kicking force magnitude and the final speed of the ball, if you are given that the foot was in contact with the ball for one hundredth of a second.

Answers

Answer:

v_{f} = 74 m/s, F = 230 N

Explanation:

We can work on this exercise using the relationship between momentum and moment

        I = ∫ F dt = Δp

bold indicates vectors

we can write this equations in its components

X axis

       Fₓ t = m ( -v_{xo})

Y axis  

        t = m (v_{yf} - v_{yo})

in this case with the ball it travels horizontally v_{yo} = 0

Let's use trigonometry to write the final velocities and the force

        sin 30 = v_{yf} / vf

        cos 30 = v_{xf} / vf

        v_{yf} = vf sin 30

        v_{xf} = vf cos 30

         sin40 = F_{y} / F

         F_{y} = F sin 40

         cos 40 = Fₓ / F

         Fₓ = F cos 40

let's substitute

      F cos 40 t = m ( cos 30 - vₓ₀)

      F sin 40 t = m (v_{f} sin 30-0)

we have two equations and two unknowns, so the system can be solved

        F cos 40 0.1 = 0.4 (v_{f} cos 30 - 20)

        F sin 40 0.1 = 0.4 v_{f} sin 30

we clear fen the second equation and subtitles in the first

         F = 4 sin30 /sin40     v_{f}

         F = 3.111 v_{f}

        (3,111 v_{f}) cos 40 = 4 v_{f} cos 30 - 80

        v_{f} (3,111 cos 40 -4 cos30) = - 80

        v_{f} (- 1.0812) = - 80

        v_{f} = 73.99

        v_{f} = 74 m/s

now we can calculate the force

          F = 3.111 73.99

          F = 230 N

A rope, under a tension of 153 N and fixed at both ends, oscillates in a second-harmonic standing wave pattern. The displacement of the rope is given by . where at one end of the rope, is in meters, and is in seconds. What are (a) the length of the rope, (b) the speed of the waves on the rope, and (c) the mass of the rope? (d) If the rope oscillates in a third-harmonic standing wave pattern, what will be the period of oscillation?

Answers

Complete question is;

A rope, under a tension of 153 N and fixed at both ends, oscillates in a second harmonic standing wave pattern. The displacement of the rope is given by

y = (0.15 m) sin[πx/3] sin[12π t].

where x = 0 at one end of the rope, x is in meters, and t is in seconds. What are (a) the length of the rope, (b) the speed of the waves on the rope, and (c)the mass of the rope? (d) If the rope oscillates in a third - harmonic standing wave pattern, what will be the period of oscillation?

Answer:

A) Length of rope = 4 m

B) v = 24 m/s

C) m = 1.0625 kg

D) T = 0.11 s

Explanation:

We are given;

T = 153 N

y = (0.15 m) sin[πx/3] sin[12πt]

Comparing this displacement equation with general waveform equation, we have;

k = 2π/λ = π/2 rad/m

ω = 2πf = 12π rad/s

Since, 2π/λ = π/2

Thus,wavelength; λ = 4 m

Since, 2πf = 12π

Frequency;f = 6 Hz

A) We are told the rope oscillates in a second-harmonic standing wave pattern. So, we will use the equation;

λ = 2L/n

Since second harmonic, n = 2 and λ = L = 4 m

Length of rope = 4 m

B) speed is given by the equation;

v = fλ = 6 × 4

v = 24 m/s

C) To calculate the mass, we will use;

v = √T/μ

Where μ = mass(m)/4

Thus;

v = √(T/(m/4))

Making m the subject;

m = 4T/v²

m = (4 × 153)/24²

m = 1.0625 kg

D) Now, the rope oscillates in a third harmonic.

So n = 3.

Using the formula f = 1/T = nv/2L

T = 2L/nv

T = (2 × 4)/(3 × 24)

T = 0.11 s

The same force is applied to two hoops. The hoops have the same mass, but the larger hoop has twice the radius. How are the angular accelerations of the hoops related

Answers

Answer:

The angular accelerations of the hoops are related by the following equation [tex]\alpha _1 = 2\alpha_2[/tex].

Explanation:

Net force on the hoop is given by;

[tex]F_{net} = ma[/tex]

where;

a is linear acceleration

m is the mass

Net torque on the hoop is given by;

[tex]\tau_{net} =I\alpha[/tex]

where;

I is moment of inertia

α is the angular acceleration

But, τ = Fr

[tex]Fr = I \alpha\\\\\alpha = \frac{Fr}{I} \\\\\alpha = \frac{Fr}{mr^2} \\\\\alpha = \frac{F}{mr} \\\\\alpha = \frac{1}{r} (\frac{F}{m} )\\\\(since\ the \ force\ and \ mass \ are \ the \ same, \frac{F}{m} = constant=k)\\\\ \alpha = \frac{k}{r}\\\\k = \alpha r[/tex]

[tex]\alpha _1 r_1= \alpha_2 r_2[/tex]

let the angular acceleration of the smaller hoop = α₁

let the radius of the smaller hoop = r₁

then, the radius of the larger loop, r₂ = 2r₁

let the angular acceleration of the larger hoop = α₂

[tex]\alpha _1 r_1= \alpha_2 r_2\\\\\alpha_2= \frac{ \alpha _1 r_1}{r_2} \\\\\alpha_2=\frac{\alpha _1 r_1}{2r_1} \\\\\alpha_2= \frac{\alpha _1}{2} \\\\\alpha _1 = 2\alpha_2[/tex]

Therefore, the angular accelerations of the hoops are related by the following equation [tex]\alpha _1 = 2\alpha_2[/tex]

At sea level, at a latitude where , a pendulum that takes 2.00 s for a complete swing back and forth has a length of 0.993 m. What is the value of g in m/s2 at a location where the length of such a pendulum is 0.970 m

Answers

Answer:

a) The value of g at such location is:

[tex]g=9.8005171\,\frac{m}{s^2}[/tex]

b) the period of the pendulum with the length is 0.970 m is:

[tex]T=1.9767 sec[/tex]

Explanation:

Recall the relationship between the period (T) of a pendulum and its length (L) when it swings under  an acceleration of gravity g:

[tex]L=\frac{g}{4\,\pi^2} \,T^2[/tex]

a) Then, given that we know the period (2.0 seconds), and the pendulum's length (L=0.993 m), we can determine g at that location:

[tex]g=\frac{4\,\pi^2\,L}{T^2}\\g=\frac{4\,\pi^2\,0.993}{(2)^2}\\g=\pi^2\,(0.993)\,\frac{m}{s^2} \\g=9.8005171\,\frac{m}{s^2}[/tex]

b) for this value of g, when the pendulum is shortened to 0.970 m, the period becomes:

¿Cómo podrías utilizar el sistema de posicionamiento global para proponer recorridos alternativos para llegar a un lugar específico (centro educativo, supermercado, el hogar, el parque, entre otros)?

Answers

Answer:

El sistema de posicionamiento global (conocido mundialmente como GPS) podría utilizarse para proponer recorridos alternativos para llegar a un lugar específico, como un parque, a través de la creación de un recorrido guiado por una aplicación móvil con diferentes rutas de acceso al lugar.

Así, por ejemplo, se crearían diferentes rutas de acceso desde un punto A hasta un punto B, teniendo en cuenta factores como: rapidez, congestión vehicular, pago o no de peajes, posibilidad de acceso a pie y determinados factores extra que influyan en la forma de llegar al lugar. Todo ello plasmado en un mapa interactivo en el cual se señalen las rutas disponibles mediante el marcado del mapa en cuestión.

Bob and Lily are riding on a merry-go-round. Bob rides on a horse near the outer edge of the circular platform, and Lily rides on a horse near the center of the circular platform. When the merry-go-round is rotating at a constant angular speed, Bob's angular speed is:_____.
a. the same as Lily's.
b. larger than Lily's.
c. exactly half as much as Lily's.
d. exactly twice as much as Lily's.
e. smaller than Lily's.

Answers

Answer: the same as Lily's

Explanation:

Angular velocity has to do with the speed at which an object will be able to rotate. We are informed that Bob and Lily are riding on a merry-go-round.

Since we are further told that Bob rides on a horse near the outer edge of the circular platform, and Lily rides on a horse near the center of the circular platform and that he merry-go-round is rotating at a constant angular speed.

Based on the above analysis, Bob's angular speed will be thesame as that of Lily.

A 300 MWe (electrical power output) Power Plant having a thermal efficiency of 40% is cooled by sea water. Due to environmental regulations the seawater can only increase temperature by 5 C during the process. How much sea water (minimum) must be used in kg/s for cooling if the plant operates at it's rated capacity?

Answers

Answer:

m = 22,877 kg / s

Explanation:

Let's solve this exercise in parts, first look for the amount of heat generated by the plant and then the amount of water to dissipate this heat

The plant generates a power of 300 MW at a rate of 40%, let's use a direct ratio rule to find the heat. If the power is 400 MW it corresponds to 40%, what heat (Q) corresponds to the other 60%

           Q = 300 60% / 40%

           Q = 450 MW

having the amount of heat generated we can use the calorimeter equation,

           Q = m [tex]c_{e}[/tex] [tex](T_{f} - T_{o})[/tex]

            m = Q / c_{e} (T_{f} - T_{o})

let's use the maximum temperature change allowed

           (T_{f} - T_{o}) = 5

the specific heat of sea water is 3934 J / kg ºC, note that it is less than that of pure water, due to the salts dissolved in sea water

     

power and energy are related

              W = Q / t

               Q = W t

             

let's calculate

             m = 450 10⁶ / (3934 5)

             m = 22,877 kg / s

Two narrow slits are illuminated by a laser with a wavelength of 593 nm. The interference pattern on a screen located x = 4.80 m away shows that the fourth-order bright fringe is located y = 8.20 cm away from the central bright fringe. Calculate the distance between the two slits.

Answers

Answer:

The distance is  [tex]d = 1.39 *10^{-4} \ m[/tex]

Explanation:

From the question we are told that

   The wavelength is  [tex]\lambda = 593 \ nm = 593 *10^{-9} \ m[/tex]

    The distance of the screen is   x  =  4.80 m

    The  location of the fourth order bright fringe is  y  =  8.20 cm = 0.082 m

    The order of the fringe is  n  =  4

   

Generally the position of a fringe with respect to the central fringe is mathematically represented as

           [tex]y = \frac{ n * x * \lambda }{d}[/tex]

Where d is the distance between the slits, so making d the subject

          [tex]d = \frac{\lambda * x * n }{ y }[/tex]

substituting values

          [tex]d = \frac{ 593 *10^{-9} * 4.80 * 4 }{ 0.082 }[/tex]

           [tex]d = 1.39 *10^{-4} \ m[/tex]

Other Questions
Find the slope of the line that passes through the points (1, -4) and (3,-1) Find the 50th term in the sequence 16, 7, -2, The radar system beeps once every second. How many times will it beep in 3 days? Do the spinal nerves include the sensory or motor neurons? Where do these neurons enter or exit the spinal cord? Anyone want to help...? Who are the founders of Microsoft? What is the perimeter of this polygon?A(2, 3)B(-4, 0)C(0,-4)D(4,0) The before-trade domestic price of tomatoes in the United States is $500 per ton. The world price of tomatoes is $400 per ton. The U.S. is a price-taker in the tomatoes market. If trade in tomatoes is allowed, the United States:______ a) will experience increases in both consumer surplus and producer surplus. b) may become either an importer or an exporter of tomatoes, but this cannot be determined. c) will become an exporter of tomatoes. d) will become an importer of tomatoes. Cybil flips a coin and rolls a fair number cube at the same time. What is the probability that she will toss tails and roll a number less than 3? A. 1/6 B. 1/3 C. 2/5 D. 1/2 Please include ALL work! Name brand drugs are able to continue capitalizing on their market power even after generic drugs enter the market because (i) almost all people fear the generic drug companies are devoting too few resources to research and development. (ii) some people fear that generic drugs are inferior. (iii) some people are loyal to the name brand. Group of answer choices Graph the function f(x) = 18(0.8) 22 tons is equivalent to ______ kilograms. Caitlin is designing a railing for a set of stairs. The railing will begin at a height of 36 inches and follow the slant of the stairs, which decreases 9 inches for every 12 horizontal inches. If mL DOC = 44 and m2 COB = 80,find the measure of the indicated arcin circle o.oB.mDEB = ? The management of a department store is interested in estimating the difference between the mean credit purchases of customers using the store's credit card versus those customers using a national major credit card. You are given the following information. Store's Card Major Credit CardSample size 64 49Sample mean $140 $125Population standard deviation $10 $8A point estimate for the difference between the means is:________a. 18b. 265c. 15d. 2 Find the value of the test statistic z using . The claim is that the proportion of adults who smoked a cigarette in the past week is less than , and the sample statistics include n subjects with saying that they smoked a cigarette in the past week. The length and width of a rectangle are measured as 58 cm and 45 cm, respectively, with an error in measurement of at most 0.1 cm in each. Use differentials to estimate the maximum error in the calculated area of the rectangle. what is the main idea of the passage the lazy tour of two idle appretices What is the solution to this system of linear equations?y-x = 6y + x = -10(-2,-8)(-8.-2)(6.-10)(-10.6) This event is independent, true or false?You roll a fair six-sided die twice. The first roll show a three and the second roll shows a four. True False