according to sternberg, ____ ability is most heavily focused on problem analysis.

The element that has two electrons in its 4d sublevel is Ruthenium (Ru) with the atomic number of 44.

Ruthenium (Ru) is a rare transition metal from the platinum group of the periodic table. It is a hard, brittle, silvery-white metal with a slight bluish tint and an atomic number of 44. Ruthenium is one of the densest materials, and it has four stable isotopes. It is commonly found in ores containing other platinum metals.

Ruthenium is frequently used in electrical contacts due to its hardness, wear resistance, and low contact resistance. It is also utilized in some alloys with platinum and other platinum-group metals to make wear-resistant electrical contacts. Ruthenium can also be used as a catalyst in some chemical reactions. It can oxidize and reduce many molecules, making it useful in various oxidation-reduction reactions.

To know more about atomic visit-

https://brainly.com/question/30898688

#SPJ11

Mendeleev constructed his periodic table based on the similarities in the properties of elements and the periodic repetition of their physical and chemical properties.

Mendeleev constructed his periodic table based on certain observations. He observed that the elements have similar chemical properties, and he arranged them in the same vertical column. The properties of elements show periodic repetition. He took the atomic weights of the elements and arranged them in a periodic manner. He also kept some gaps in the table for the yet-to-be-discovered elements and predicted their properties. This led to the development of the concept of periodicity.

In his table, Mendeleev also recognized the existence of certain trends among the properties of elements. For instance, the first element in each group has the smallest atomic weight. The atomic weights of elements increase from left to right across each row. The most reactive metallic elements are at the bottom left-hand corner of the table, while the non-metallic elements are at the top right-hand corner of the table.

Learn more about periodic table here:

https://brainly.com/question/28747247

#SPJ11

The reducing agent in the following reaction 2Na + 2H₂O → 2NaOH + H₂ is Na. The correct answer is option A.

Oxidation-reduction reactions or redox reactions are chemical reactions that involve the transfer of electrons between two species. In such reactions, the reducing agent is the one that is oxidized, i.e., it loses electrons. On the other hand, the oxidizing agent is the one that is reduced, i.e., it gains electrons. The reducing agent reduces the oxidizing agent by donating electrons to it.

In this reaction, sodium (Na) is oxidized, and hence acts as the reducing agent. Na loses an electron and becomes positively charged Na+ ion, which then combines with hydroxide (OH-) ion to form sodium hydroxide (NaOH). The hydrogen ion (H+) produced by the dissociation of water is reduced to hydrogen gas (H₂) by accepting the electron donated by sodium.

Thus, the reducing agent in the reaction 2Na + 2H₂O → 2NaOH + H₂ is Na. The correct answer is option A.

Learn more about redox reactions here:

https://brainly.com/question/13293425

#SPJ11

Proper storage and handling of decontaminated PPE help ensure its integrity and effectiveness when needed for future use. D) None of these is correct.

After undergoing decontamination, personal protective equipment (PPE) should not be placed in areas such as the vehicle cab, living area, or sleeping area. These locations can potentially contaminate the previously decontaminated PPE and compromise its effectiveness. It is important to maintain a clear distinction between clean and contaminated areas to prevent cross-contamination.

Ideally, decontaminated PPE should be stored in designated areas or containers specifically designed for clean items. These areas should be separate from areas where contamination may occur.

To know more about PPE

brainly.com/question/14333649

#SPJ11

When an electrical current is applied to an aqueous solution of lithium sulfide, hydrogen gas will be produced at the cathode and sulfur will be produced at the anode.

At the cathode, positively charged hydrogen ions (H+) gain electrons and are reduced to hydrogen gas (H2).2H+ + 2e- → H2

At the anode, negatively charged sulfide ions (S2-) lose electrons and are oxidized to form elemental sulfur (S).

S2- → S + 2e-

It's worth noting that lithium ions (Li+) will also be present in the solution but they will not be produced at either the anode or cathode.

To know more about electrical visit-

https://brainly.com/question/33513737

#SPJ11

The enthalpy of the given reaction is -1416 kJ.

1. 2M(s) + 6HCl(aq) → 2MCl₃(aq) + 3H₂(g); ΔH₁ = -609 kJ

2. HCl(g) → HCl(aq); ΔH₂ = -74.8 kJ

3. H₂(g) + Cl₂(g) → 2HCl(g); ΔH₃ = -1845.0 kJ

4. MCl₃(s) → MCl₃(aq); ΔH₄ = -481.0 kJ

We have to calculate the enthalpy of the following reaction:

2M(s) + 3Cl₂(g) → 2MCl₃(s)

Enthalpy change for the given reaction will be equal to the sum of enthalpies of the first and third reactions and the negative of enthalpy of the fourth reaction. ΔH2 will be ignored since it is not included in the reaction equation.

ΔHrxn = [ΔH₁ + ΔH₃] + [-ΔH₄]

ΔHrxn = [(-609 kJ) + (-1845.0 kJ)] + [481.0 kJ]

ΔHrxn = -1416 kJ

Therefore, the enthalpy of the given reaction is -1416 kJ.

Learn more about enthalpy here:

https://brainly.com/question/32882904

#SPJ11

Complete question is:

Consider these reactions, where M represents a generic metal.

1. 2M(s) + 6HCl(aq) → 2MCl₃(aq) + 3H₂(g); ΔH₁ = -609 kJ

2. HCl(g) → HCl(aq); ΔH₂ = -74.8 kJ

3. H₂(g) + Cl₂(g) → 2HCl(g); ΔH₃ = -1845.0 kJ

4. MCl₃(s) → MCl₃(aq); ΔH₄ = -481.0 kJ

Use the information above to determine the enthalpy of the following reaction:

2M(s) + 3Cl₂(g) → 2MCl₃(s)

The nuclear model of the atom was proposed by Rutherford and his co-workers in 1911.

The model was a result of their famous alpha-particle scattering experiment. The experimental evidence for the development of the nuclear model of the atom was given by the alpha-particle scattering experiment.In this experiment, a thin gold foil was bombarded with alpha particles.

It was observed that most of the alpha particles passed straight through the foil, but a few of them were deflected by large angles. Some of the alpha particles even returned back to the source.This observation was contrary to the plum pudding model of the atom proposed by Thomson.

According to this model, the positive charge of the atom was concentrated in a very small volume called the nucleus. The electrons revolved around the nucleus in circular orbits. The nuclear model of the atom explained the experimental results of the alpha-particle scattering experiment and became the basis for our current understanding of the atomic structure.

In conclusion, the experimental evidence for the development of the nuclear model of the atom was given by the alpha-particle scattering experiment which was a result of Rutherford and his co-workers in 1911.

Learn more about nuclear model -

brainly.com/question/19989484

#SPJ11

After washing, rinsing, and sanitizing a thermometer, it should be dried using a clean and disposable paper towel or allowed to air dry in a clean and sanitary environment.

It is important to ensure that the thermometer is thoroughly dried to prevent the growth of bacteria or other contaminants. Using a paper towel helps to remove any remaining moisture from the thermometer, reducing the risk of contamination. Care should be taken to handle the thermometer with clean hands or gloves during the drying process to maintain its cleanliness. Once dry, the thermometer should be stored in a clean and designated area to prevent recontamination.

To know more about thermometer

brainly.com/question/16840415

#SPJ11

True. Scientists do speculate that Europa, one of Jupiter's moons, may have liquid water below its frozen surface. Multiple lines of evidence, including observations from spacecraft missions like Galileo, suggest the presence of a subsurface ocean on Europa.

The moon's icy crust appears to have cracks and features that indicate a dynamic interior. Additionally, tidal heating caused by Jupiter's gravitational forces is believed to generate enough heat to maintain a subsurface ocean of liquid water.

Further support for this hypothesis comes from observations of geysers or plumes erupting from Europa's surface, which suggest the presence of liquid water reaching the moon's outer shell. These findings have sparked interest in exploring Europa further to study its potential habitability and the possibility of finding signs of life.

While the presence of liquid water on Europa is still considered a hypothesis, ongoing research and future missions, such as the Europa Clipper mission planned by NASA, aim to gather more data and provide a more comprehensive understanding of this fascinating moon.

To know more about NASA

brainly.com/question/29890206

#SPJ11

The term used for the geometrical isomer shown below is the term "cis-isomer."

Cis-trans isomerism, also known as geometric isomerism or configurational isomerism, is a type of stereoisomerism that occurs in alkenes and cyclic compounds.

Cis-isomer and trans-isomer are two types of stereoisomers.

Cis-isomer refers to a molecule in which two functional groups or substituents are on the same side of the double bond or ring.

Cis-isomerism occurs when substituents on a double bond or ring have the same spatial orientation.

The molecule shown below is an example of a cis-isomer.

Cis-isomers and trans-isomers have the same molecular formula and sequence of bonded atoms but differ in their spatial arrangement.

learn more about geometrical isomer on

https://brainly.com/question/31744339

#SPJ11

Neon (Ne) has 8 electrons in its outer shell. Neon belongs to the noble gases group on the periodic table, specifically Group 18 or Group 8A.

The chemical elements are arranged in rows and columns on the periodic table, also known as the periodic table of the elements. It is frequently used in physics and other sciences as a chemistry organizing symbol.

Learn more about Periodic table:

brainly.com/question/15987580

#SPJ11

The concentration of the species in a 0.140 M solution of H₂CO₃ is given by:

[H₂CO₃] = 0.140 M, [HCO₃⁻] = 1.45×10^−7 M, [CO₃²⁻] = 1.45×10^−10 M, [H₃O⁺] = 4.5×10^−4 M, [OH⁻] = 2.2×10^−11 M.

Carbonic acid is a diprotic acid, which means that it has two acid dissociation constants. The first step is for the acid to donate a proton to form bicarbonate, and the second step is for the acid to donate another proton to form carbonate. H₂CO₃(aq) + H₂O(l) ⇌ H₃O⁺(aq) + HCO₃⁻(aq) Ka₁ = 4.3×10−7

HCO₃⁻(aq) + H₂O(l) ⇌ H₃O⁺(aq) + CO₃²⁻(aq) Ka₂ = 4.7×10−11

The formula for the concentrations of the species present in the solution is as follows:

[H₂CO₃] = 0.140 M

[HCO₃⁻] = Ka₁

[H₂CO₃]/[H₃O⁺] = 1.45×10^−7 M

[CO₃²⁻] = Ka₂[HCO₃⁻]/[H₃O⁺]

= 1.45×10^−10 M

[H₃O⁺] = Ka₁[H₂CO₃]/[HCO₃⁻]

= 4.5×10^−4 M

[OH⁻] = Kw/[H₃O⁺] = 2.2×10^−11 M, where Kw is the ion product constant for water.

Learn more about diprotic acid here:

https://brainly.com/question/29068526

#SPJ11

The factors that cause changes between the solid and liquid state are temperature and pressure.

The physical state of matter can be altered by changing the temperature and pressure. A solid is a state of matter in which molecules are tightly packed and cannot move freely. When heat energy is added to a solid, the molecules gain kinetic energy and begin to vibrate more vigorously, eventually causing them to break free from their rigid structure. This process is called melting, and it results in a change from a solid to a liquid state. The reverse process, from a liquid to a solid state, occurs when heat energy is removed from a liquid, causing the molecules to lose kinetic energy and become more organized.

In addition to temperature, pressure can also cause changes between solid and liquid states. As pressure increases, molecules become more tightly packed and move more slowly. This can cause a substance to change from a liquid to a solid state. The reverse process, from a solid to a liquid state, can occur when pressure is reduced.  

Overall, temperature and pressure are the two primary factors that cause changes between the solid and liquid state of matter.

Learn more about liquid state here:

https://brainly.com/question/27951509

#SPJ11

Water vapor is the gas that has a variable concentration in the atmosphere. Its concentration can vary greatly depending on factors such as temperature, humidity, and weather patterns.

Water vapor is constantly being added to the atmosphere through evaporation from bodies of water and transpiration from plants. It can also condense into clouds and precipitation, leading to fluctuations in its concentration in different regions and over time. On the other hand, carbon dioxide, methane, and ozone are considered trace gases and their concentrations in the atmosphere are relatively stable, with variations mainly due to human activities and natural processes.

The gases that have variable concentrations in the atmosphere are:

- Carbon Dioxide (CO2): The concentration of carbon dioxide in the atmosphere can vary due to natural processes such as photosynthesis and respiration, as well as human activities like the burning of fossil fuels. Changes in land use, deforestation, and industrial processes can contribute to fluctuations in carbon dioxide levels.

- Methane (CH4): Methane concentrations in the atmosphere can vary as a result of both natural and anthropogenic sources. Natural sources include wetlands, termites, and natural gas seepage, while human activities such as livestock farming, rice cultivation, and fossil fuel extraction contribute to increased methane emissions.

- Ozone (O3): Ozone concentrations in the atmosphere can vary regionally and temporally. While ozone is naturally present in the stratosphere, where it plays a crucial role in protecting the Earth from harmful UV radiation, ground-level ozone is formed through chemical reactions involving pollutants emitted by human activities, including vehicle emissions and industrial processes.

- Water Vapor (H2O): Water vapor is highly variable in the atmosphere and its concentration can vary significantly depending on the location, temperature, and weather conditions. It is influenced by factors such as evaporation from bodies of water, transpiration from plants, and atmospheric dynamics. Water vapor is a key component of the Earth's climate system and plays a crucial role in weather patterns.

To know more about Water vapor

brainly.com/question/14529481

#SPJ11

The enolase reaction is inhibited by sodium fluoride (NaF).

Enolase is an enzyme that catalyzes the conversion of 2-phosphoglycerate (2-PG) to phosphoenolpyruvate (PEP) in the glycolysis pathway. The reaction involves the removal of a water molecule from 2-PG to form a double bond in the enol form, which is then converted to the keto form to produce PEP.

The reaction can be represented as follows:

2-Phosphoglycerate (2-PG) ⇌ Phosphoenolpyruvate (PEP)

The presence of sodium fluoride (NaF) inhibits this reaction. NaF is known to interact with metal ions, particularly magnesium ions (Mg2+), which are essential cofactors for enolase activity. NaF forms a complex with Mg2+ ions, reducing their availability for enolase, thus inhibiting its catalytic function.

Learn more about phosphoglycerate

brainly.com/question/31594691

#SPJ11

The bioavailability of calcium depends in part on vitamin D intake, amount of calcium consumed, and the presence of other substances that affect absorption.

The bioavailability of calcium is determined by a variety of factors. The bioavailability of calcium is the proportion of calcium ingested that is actually absorbed and used by the body. Calcium bioavailability is influenced by a variety of factors, including the amount of calcium consumed, vitamin D intake, and the presence of other substances that affect absorption.

Calcium is best absorbed in doses of no more than 500 mg at a time. Calcium is absorbed most effectively when consumed with meals. Calcium bioavailability is decreased by high levels of sodium, caffeine, and alcohol. Calcium is absorbed more effectively when it is consumed with other minerals and nutrients such as vitamin D, magnesium, and phosphorus.

Vitamin D is necessary for calcium absorption, and calcium cannot be utilized without it. Vitamin D deficiency is a major cause of calcium deficiency. Vitamin D is produced in the skin when it is exposed to sunlight. Vitamin D supplements or fortified foods are also available.

Learn more about calcium absorption here:

https://brainly.com/question/32825968

#SPJ11

Answer:

The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom, discovered in 1911 by Ernest Rutherford based on the 1909 Geiger–Marsden gold foil experiment.

Explanation:

Answer:

Atomic nuclei consist of electrically positive protons and electrically neutral neutrons.

Explanation: Hope it helps :)

The symbol [o] written above a reaction arrow means that oxygen is present in the reaction. The symbol [o] indicates that oxygen is a reactant or a product in the reaction equation. An arrow usually represents a chemical reaction in chemical equations.

In chemical equations, the [o] symbol is used to indicate oxygen as a reactant or product. Here, we must understand that Oxygen is one of the essential elements of the periodic table. It is colorless, odorless, and tasteless gas. Its atomic number is 8, and it is a member of the chalcogen group in the periodic table. The element oxygen is essential for most organisms to perform cellular respiration. It is also used extensively in the chemical industry, as well as in various other industrial processes.

Therefore, the symbol [o] is used to show the presence of oxygen in the reaction and to indicate the role of oxygen in the reaction. It is used in reaction equations to differentiate between reactants and products and to provide a clear picture of the reaction taking place.

To know more about chemical visit-

https://brainly.com/question/29240183

#SPJ11

The modified formula for the multiplicity of the two-dimensional ideal gas is Ω = (1/N!) * (Aⁿ / hⁿ) * (2πm/ħ²)ⁿ/²

(a) In a similar manner to the three-dimensional ideal gas, we can use the formula for the multiplicity (Ω) of a two-dimensional ideal gas given by the equation:

Ω = (1/N!) * (Vⁿ / h²ⁿ)) * (4πm/2πħ²)ⁿ/²

However, since the gas is now in a two-dimensional universe, we need to modify this equation to account for the area (A) instead of volume (V). The modified formula for the multiplicity of the two-dimensional ideal gas is:

Ω = (1/N!) * (Aⁿ / hⁿ) * (2πm/ħ²)ⁿ/²

(b) The expression for the entropy (S) of the two-dimensional ideal gas can be obtained by using the relationship between entropy and multiplicity:

S = k * ln(Ω)

Substituting the modified formula for Ω derived in part (a), we get:

S = k * ln[(1/N!) * (Aⁿ / hⁿ)) * (2πm/ħ²)ⁿ/²]

S = k * [ln(Aⁿ) - N * ln(h) + (N/2) * ln(2πm/ħ²) - ln(N!)]

(c) To determine the temperature (T), pressure (P), and chemical potential (μ), we need to take partial derivatives of entropy (S) with respect to energy (U), area (A), and number of particles (N).

Temperature (T):

(∂S/∂U) = 1/T

Pressure (P):

(∂S/∂A) = P/T

Chemical potential (μ):

(∂S/∂N) = -μ/T

To simplify the expressions further, it is necessary to evaluate the logarithmic term and apply Stirling's approximation for the factorial term (N!). The resulting expressions may be complex and involve various constants and logarithms.

It is important to note that since we are in a two-dimensional universe, the concept of pressure is defined as force per unit length instead of force per unit area as in three dimensions. Additionally, the chemical potential reflects the behavior of the gas in two dimensions.

The specific simplification and interpretation of the results would require further mathematical calculations and analysis based on the given expressions and the specific values of U, A, and N.

Learn more about Ideal gas:

brainly.com/question/20348074

#SPJ11

Answer:

Answer and Explanation: To determine the number of moles of silver (Ag), we simply need to divide the number of atoms of Ag by the Avogadro's number, N , which is equal to 6.02 10 atoms of Ag per mole of Ag. Therefore, c) 6.3 moles of Ag are present in a sample of 3.8 10 atoms Ag.

The pH of the base solution after adding the [tex]HNO_3[/tex] solution is approximately 2.14.

To calculate the pH of the base solution after adding the [tex]HNO_3[/tex] solution, we need to consider the acid-base reaction between methylamine ([tex]CH_3NH_2[/tex]) and nitric acid ([tex]HNO_3[/tex]). Methylamine acts as a base, while nitric acid is an acid. The reaction can be represented as follows:

[tex]CH_3NH_2 + HNO_3 \rightarrow CH_3NH_3^+ + NO_3^-[/tex]

Since methylamine is a weak base, we need to consider its reaction with water as well:

[tex]CH_3NH_2 + HNO_3 \rightarrow CH_3NH_3^+ + NO_3^-[/tex]

To solve this problem, we'll use the Henderson-Hasselbalch equation, which relates the pH of a solution to the pKa and the ratio of the conjugate acid and base forms. The pKa of methylamine is given as 3.36.

1. Calculate the initial moles of methylamine in the base solution:

Initial moles of methylamine = volume of solution (L) * molarity of methylamine (mol/L)

Initial moles of methylamine = 0.1323 L * 0.7100 mol/L

Initial moles of methylamine = 0.093963 mol

2. Calculate the moles of nitric acid added to the solution:

Moles of nitric acid = volume of solution (L) * molarity of nitric acid (mol/L)

Moles of nitric acid = 0.1114 L * 0.7500 mol/L

Moles of nitric acid = 0.08355 mol

3. Calculate the moles of methylamine remaining after the reaction:

Moles of methylamine remaining = Initial moles of methylamine - Moles of nitric acid added

Moles of methylamine remaining = 0.093963 mol - 0.08355 mol

Moles of methylamine remaining = 0.010413 mol

4. Calculate the concentration of the conjugate acid ([tex]CH_3NH_3^+[/tex]) formed:

The concentration of [tex]CH_3NH_3^+[/tex] = moles of methylamine remaining / volume of solution (L)

Concentration of [tex]CH_3NH_3^+[/tex] = 0.010413 mol / (0.1323 L + 0.1114 L)

The concentration of [tex]CH_3NH_3^+[/tex] = 0.010413 mol / 0.2437 L

Concentration of [tex]CH_3NH_3^+[/tex] = 0.0427 M

5. Use the Henderson-Hasselbalch equation to calculate the pH of the base solution:

pH = pKa + log10 ([concentration of [tex]CH_3NH_3^+[/tex]] / [concentration of [tex]CH_3NH_2[/tex]])

Since the pKa of methylamine is given as 3.36:

pH = 3.36 + log10 (0.0427 M / 0.7100 M)

pH = 3.36 + log10 (0.0601)

pH = 3.36 + (-1.22)

pH = 2.14

Therefore, the pH of the base solution after adding the [tex]HNO_3[/tex] solution is approximately 2.14.

Learn more about acid-base reactions at:

https://brainly.com/question/10467673

#SPJ4

Answer: B) the ideal gas constant

Explanation:

All gases obey an equation of state known as the Ideal gas law: PV = nRT,

Where Pressure = P, volume = V, and temperature = T, n is the number of moles of the gas and R is the Ideal Gas Constant = 8.314 joules per kelvin per mole.

Therefore the Correct Option is B.

To learn more about the ideal gas law:

https://brainly.com/question/12624936

The factors that determine how much chemical energy an object has include the object's mass, chemical composition, and the types of bonds that are present.

Chemical energy is one of the many different types of energy that exist, and it is the energy that is stored within an object's chemical bonds. Chemical energy has the potential to be released through a chemical reaction.

The factors that determine how much chemical energy an object has include the object's mass, chemical composition, and the types of bonds that are present.

The more mass an object has, the more chemical energy it will contain because there will be more bonds between the particles in the object's molecules.

The chemical composition of an object also plays a role in determining its chemical energy. For example, molecules that contain more carbon and hydrogen atoms will typically have more chemical energy than molecules that contain fewer carbon and hydrogen atoms.

Finally, the types of bonds that are present in an object also play a role in determining its chemical energy. Bonds that are stronger and more stable will contain more chemical energy than bonds that are weaker and less stable.

In conclusion, the amount of chemical energy an object contains depends on its mass, chemical composition, and the types of bonds that are present in it. The chemical energy is the potential energy that can be released through a chemical reaction.

Learn more about the chemical energy from the given link-

https://brainly.com/question/5650115

#SPJ11

Bromothymol blue is a pH-indicator that changes color depending on the acidity or alkalinity of a solution, At pH 9, the bromothymol blue solution would appear blue-green in color.

Bromothymol blue is typically yellow in acidic solutions with a pH below 6. At neutral pH (around 7), it transitions to a green color. As the pH increases, bromothymol blue turns blue and then blue-green as it reaches alkaline conditions.

At pH 9, which is slightly alkaline, the bromothymol blue solution would exhibit a blue-green color. This color transition occurs due to the change in the ionization state of the indicator molecule as the pH changes.

The blue-green color indicates that the solution is more alkaline than neutral but not strongly basic.

It's important to note that the color change of bromothymol blue can vary slightly depending on factors such as concentration, temperature, and specific experimental conditions.

Additionally, precise color interpretation is best done by comparing the observed color with a standard color chart or known pH values.

Learn more about pH indicator from the given link

https://brainly.com/question/29262548

#SPJ11

Impurity atoms in ceramic materials may form substitutional and interstitial solid solutions is True.

Ceramic materials are an inorganic compound of metals and nonmetals. Impurities in ceramic materials can be intentionally added to improve the properties of the materials. The impurities in the ceramic materials may form substitutional and interstitial solid solutions.

Substitutional solid solution refers to a type of solid solution in which the impurity atoms substitute the host atoms of the crystal lattice while retaining the crystal structure. Interstitial solid solution refers to a type of solid solution in which impurity atoms occupy the interstitial sites in the crystal lattice of the ceramic material, but the crystal structure changes slightly due to the presence of impurity atoms.

The concentration of impurities can vary up to 150 ppm (parts per million).

Therefore, the statement "Impurity atoms in ceramic materials may form substitutional and interstitial solid solutions" is True.

Learn more about interstitial solid in the link:

https://brainly.com/question/30836773

#SPJ11

Answer:

mass=8,640g

Explanation:

[tex]n = \frac{mass}{molar \: mass} [/tex]

where

mole(n)= 120mol

Molar mass = Ar2

= 36×2

= 72g/mol.

Mass = ?

Therefore mass =

[tex]120 = \frac{m}{72} . \\ 120 \times 72 = m \\ 8640g = m[/tex]

a. UV radiation is higher energy, causing DNA damage and increased skin cancer risk.

b. Lead shields X-rays due to density, but gamma radiation requires thicker, denser materials for effective blocking.

a. Ultraviolet (UV) radiation has shorter wavelengths and higher energy compared to visible light. This higher energy allows UV radiation to penetrate the skin and interact with cellular components, including DNA. UV radiation can cause damage to the DNA in skin cells, leading to mutations and an increased risk of skin cancer. Tanning is considered dangerous because it indicates exposure to UV radiation, which can have harmful effects on the skin.

b. X-rays and gamma radiation are both forms of high-energy electromagnetic radiation. However, they differ in their ability to penetrate materials. X-rays have lower energy and can be blocked by materials with high density and atomic number, such as lead. Lead effectively shields X-rays by absorbing and scattering the radiation, preventing it from reaching sensitive tissues. On the other hand, gamma radiation has higher energy and requires thicker and denser materials, such as concrete or lead combined with other shielding materials, for effective attenuation.

To learn more about UV radiation here

https://brainly.com/question/13849635

#SPJ4

Mercury is a dense and small planet. It orbits closer to the sun than any other planet in the solar system, with an orbital distance of 36 million miles.

As a result of its proximity to the sun, mercury has a surface temperature range of -280 degrees Fahrenheit to 800 degrees Fahrenheit, making it the planet with the greatest temperature extremes. These two properties, size, and density, indicate that Mercury is differentiated.

Mercury's small size implies that it has a relatively small volume. However, the planet's high density implies that the materials that make up the planet are compressed. The compression caused the materials to rearrange according to density, with the most dense materials at the center.

As a result, Mercury has a core made up of iron and nickel, as well as a mantle composed of silicates that surround the core.In conclusion, the properties of density and small size imply that Mercury is differentiated.

To know more about Mercury visit-

https://brainly.com/question/19940784

#SPJ11

Liquid refrigerant should not be introduced into an evacuated chiller because it can cause "liquid hammer" and damage the compressor.

The compressor in a refrigeration system is responsible for compressing refrigerant vapor.

The vapor is then condensed to a liquid state by the chiller, allowing the cooled liquid to flow through a refrigeration loop.

The compressor is designed to handle the vapor state of the refrigerant, which is much less dense than the liquid state.

Introducing liquid refrigerant into an evacuated chiller can cause a rapid pressure rise known as "liquid hammer".

Liquid hammer can lead to compressor failure and other system damage.

To prevent liquid hammer and damage to the chiller, it is important to charge the chiller with refrigerant in vapor form.

Before charging, the chiller should be evacuated to remove any remaining air or moisture.

The correct refrigerant charge in vapor form can then be introduced into the system, which will condense into a liquid state as the system operates.

learn more about Liquid refrigerant on

https://brainly.com/question/28331355

#SPJ11