Answer:
According to the Brønsted definition, an acid is a substance capable of donating a proton, and a base is a substance capable of accepting a proton. ... The species giving up the proton is HCl, an acid. The species accepting the proton is water, the base. The species Cl- is the conjugate base of HCl.
The correct value of m, n, x and y to obtain a balanced equation is?
m B2O3(s) + n HF(l) → x BF3(g) + y H2O(l)
a.
m=1, n=1, x=1 and y=1
b.
m=1, n=6, x=2 and y=3
c.
m=1, n=1.5, x=1 and y=1
d.
m=2, n=12, x=4 and y=6
Answer:
d
Explanation:
answer d makes the equation balance
Mg(s) + 2HCl (aq) -----> MgCl2 (aq) + H2
You have 6.00 g HCl and 4.8 g Mg.
What is the limiting reaction
Answer:
HCl is the limiting reactant
Explanation:
To find the limiting reactant of a reaction we must find the moles of each one as follows:
Moles Mg (Molar mass: 24.305g/mol)
4.8g Mg * (qmol / 24.305g) = 0.20 moles Mg
Moles HCl (Molar mass: 36.46g/mol)
6.00g HCl* (1mol / 36.46g) = 0.165 moles HCl
Based on the chemical reaction, for a complete reaction of 0.20 moles of Mg are necessaries:
0.20 moles Mg * (2mol HCl / 1mol Mg) = 0.40 moles HCl
As there are just 0.165 moles of HCl:
HCl is the limiting reactantNeutralization Reactions
5. Acids and bases go to completion via neutralization reactions, thus titrations are applicable. Refer to educational resources and provide an example of the chemical reactions for the solutions in a–c.
a. A mixture between a strong acid and a strong base.
b. A strong base mixed with a weak acid.
c. A strong acid mixed with weak base.
Answer:
its a option neutralization takes place between acid and base plz mark me branliest
What is measured by the heat of reaction?
Answer:
The heat of reaction is basically the energy that is being released and or absorbed when chemicals are transformed in a type of chemical reaction. However, the heat of reaction or also called reaction enthalpy is mostly or typically expressed as a molar enthalpy in kJ/mol and or as just a specific enthalpy in kJ/kg or kJ/L.
Suppose you are titrating vinegar, which is an acetic acid solution of unknown strength, with a sodium hydroxide solution according to the equation H C 2 H 3 O 2 + N a O H ⟶ H 2 O + N a C 2 H 3 O 2 HCX2HX3OX2+NaOH⟶HX2O+NaCX2HX3OX2 If you require 33.98 mL of 0.1656 M N a O H NaOH solution to titrate 10.0 mL of H C 2 H 3 O 2 HCX2HX3OX2 solution, what is the molar concentration of acetic acid in the vinegar? Type answer:
Answer:
[tex]M_{acid}=0.563M[/tex]
Explanation:
Hello there!
In this case, given the neutralization of the acetic acid as a weak one with sodium hydroxide as a strong base, we can see how the moles of the both of them are the same at the equivalence point; thus, it is possible to write:
[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]
Thus, we solve for the molarity of the acid to obtain:
[tex]M_{acid}=\frac{M_{base}V_{base}}{V_{acid}} \\\\ M_{acid}=\frac{33.98mL*0.1656M}{10.0mL}\\\\ M_{acid}=0.563M[/tex]
Regards!
the ideal of stationary orbit was first given by?
Answer:
Neil Bohr
Explanation:
Thank me latur✊
Do all materials respond to heat in the same way? Give an example to support your answer.
Answer:
yes.
Explanation:
Energy transfer will continue until the objects are at the same temperature. There are 3 ways in which thermal energy can be transferred from one object/substance to another, or from a system to its surroundings: Conduction. Convection.
All materials do not respond to heat in the same way because every material is made up of different arrangements of atoms and different substances, and different substances respond differently when reacting with heat.
What is heat?Heat is a form of energy that is produced by the burning of something. It is thermal energy that increases the warmth of a body or an atmosphere.
As long as the objects are not at the same temperature, energy transfer will continue. Three methods exist for transferring thermal energy from one thing or thing to another, or from a system to its surroundings: Conduction. Convection.
Thus, because each material is made up of a unique combination of atoms and substances, and because each substance reacts to heat in a unique way, no two materials react to heat in the same way.
To learn more about heat, refer to the below link:
https://brainly.com/question/20980273
#SPJ2
Which set of coefficients would be needed to balance the chemical equation below?
Answer:
2Zn2+3O2 ----> 2ZnO+2SO2
Explanation:
Calculate the pH and percent ionization of a HC2H3O2 solution with a concentration of 0.500 M. (Ka = 1.8 x10-5)
Answer:
I can not see the file
Explanation:
Many types of fungi are responsible for the breakdown and
recycling of organic material in an ecosystem. Fungi are an
example of a(n)
Answer:
mushroom are a type of fungi
Explanation:
Which is a saturated solution?
A）40g NH4Cl in 100g water at 50°C
B）2g SOz in 100g water at 10°C
C）52g KCl in 100g water at 80°C
D）120g KI in 100g water at 20°C
Answer:
C）52g KCl in 100g water at 80°C
Explanation:
A saturated solution is one that contains as much solute as it can dissolve in the presence of excess solute at that particular temperature.
A solutibility curve is a graph that shows the variability with temperature of the solubility of a solute in a given solvent. A solutibility curve can provide information of whether a solution formed frommthe solute and solvent are saturated or not at a given temperature.
From the solubility curve in the attachment below:
A) A saturated solution of NH₄Cl will contain about 52 g solute per 100 g sat 50 °C. Thus, a solution of 40 g NH₄Cl in 100 g water at 50 °C is an unsaturated solution.
B) A saturated solution of SO₂ at 10°C will contain about 70 g of solute in 100 g of water. Thus a solution of 2g SO₂ in 100g water at 10°C is an unsaturated solution.
C) A saturated solution of KCl at 80 °C will contain about 52 g of solute in 100 g of water. Thus, a solution of 52g KCl in 100g water at 80°C is a saturated solution.
D) A saturated solution of Kl at 20 °C will contain about 145 g of solute in 100 g of water. Thus, a solution of 120g KI in 100g water at 20°C is an unsaturated solution.
Select the description of a galvanic (voltaic) cell. An electrochemical cell that uses electricity to produce an oxidation-reduction reaction. An electrochemical cell that produces electricity from a spontaneous oxidation-reduction reaction. One-half of an electrochemical cell in which either oxidation or reduction occurs. Connects the two half-cells in an electrochemical cell to maintain electrical neutrality.
Answer: An electrochemical cell that produces electricity from a spontaneous oxidation-reduction reaction
Explanation:
Galvanic cell is a device which is used for the conversion of the chemical energy produced in a redox reaction into the electrical energy.
Galvanic cell consists of two half cells known as anode and cathode. Oxidation takes place at anode and reduction takes place at cathode. The two half cells are connected by a salt bridge which contains an electrolyte which maintains the electrical neutrality.
As student used a pen to draw a line across a piece of chromatography paper. he then placed a sample of dye on the drawn line for analysis . is the student doing the right thing? why?
Answer is in the photo. I can only upload it to a file hosting service. link below!
tinyurl.com/wpazsebu
If energy cannot be created or destroyed, what happens to the kinetic and potential energy?
Answer:
According to the law of conservation of energy, energy cannot be created or destroyed, although it can be changed from one form to another. KE + PE = constant. ... As the car coasts down the hill, it moves faster and so it's kinetic energy increases and it's potential energy decreases. hope this helps
Explanation:
Answer:
They cannot be destroyed or created however,
Explanation:
it can only be transformed or transferred from one form to another.
The ratio of the measured molar volume of a real gas to the measured molar volume if the gas
were to behave ideally is known as
Answer: compressibility
Explanation:
The ratio of the measured molar volume of a real gas to the measured molar volume of an ideal gas is known as compressibility.
Compressibility is defined by the symbol Z and is calculated by the formula :
[tex]Z=\frac{PV}{nRT}[/tex]
For a gas with ideal behavior, molar volume of an ideal gas is equal to the molar volume of a real gas so Z= 1.
What chemical reaction affects thermal energy?
How many moles of product are formed? Can someone help me ?
Answer:
It says right under here what to do
Explanation
Determine the moles of product produced by dividing the grams of product by the grams per mole of product. You now have calculated the number of moles of every compound used in this reaction. 41.304 g of NaCl ÷ 58.243 g/mol = 0.70917 moles of NaCl.
Given that C = n/V. And you have n=2 and C=4 what does V= ??
1...0.5
2...2
3...4
4...8
or5...Dont know
HELP ASAP WHATS THE DEFINITION I NEED JT NKW
Answer:
1.Summer solstice 2.seasons 3. winter solstice 4. Equinox
Explanation:
I hope it helps!
Have a great day!
What is the function of white blood cells?
A) immunity
b) carry nutrients, waste
C) blood clotting
Answer:
A
Explanation:
They help fight infection and other disease
Answer:
immunity is the answer for this question
How many moles is equal 82.4 grams of CO,?
Answer:
1 mole = 28.0101
Hence,
82.4 = around 2.8 mole
Have a great day <3
ANSWERIT AND YOU WILL BE MARKED THE BRAINLIEST
Answer:
The answer is definitely D
Explanation:
A student places 2 mL of 2% ethanolic silver nitrate solution into test tube. They add 2 drops of an unknown compound into the test tube while gently mixing. After five minutes, the student heated the test tube in a water bath and a white precipitate formed. They added 2 drops of 1 M nitric acid to the mixture which was cooled to room temperature and still noticed the precipitate did not dissolve in response to the nitric acid. What compound is most likely the unknown
Answer:
hi
Explanation:
i am smart but i need this app cuz some are realy hard
What features did you use to classify igneous rocks as extrusive or intrusive ?
Answer: Igneous rocks may be simply classified according to their chemical/mineral composition as felsic, intermediate, mafic, and ultramafic, and by texture or grain size: intrusive rocks are course grained (all crystals are visible to the naked eye) while extrusive rocks may be fine-grained (microscopic crystals) or glass.
Explanation: Hope this helped! :)
Answer:
Igneous rocks may be simply classified according to their chemical/mineral composition as felsic, intermediate, mafic, and ultramafic, and by texture or grain size: intrusive rocks are course grained (all crystals are visible to the naked eye) while extrusive rocks may be fine-grained (microscopic crystals) or glass ( ...
What is the pressure of a mixture of oxygen, nitrogen and carbon dioxide gases if the pressures of these gases are as follows: PO2 = 254 mm Hg, PN2 = 0.351 atm, and
PCO2 = 43.9 kPa?
Answer:
his is an example of a first-year chemistry question where you must first convert two of the pressures to the units of the third and add them up, per Dalton’s law of additive pressures. There are three possible answers, one for each of the three pressure units.
1 atm = 760 torr …… torr and mm Hg are the same
1 atm = 101.3 kPa
Dalton’s law:
P(total) = P(O2) + P(N2) + P(CO2)
Explanation:
Gases will assume whatever pressure depending on the equation of state of the mixture (in this case) and the volume htey are contained in. That could be the ideal gas law and simple mixing law, If you are quoting the partial pressures which you call simply “the pressure” of each gas, and that these refer to their values in the present mixture, then yes, we would add them up. The pressures are low enough for the ideal gas law to apply provided the temperature is not extremely low as well .
2C2H2 + 502 = 4CO2 + 2H20
when 20000g of 2C2H2 + 5O2 = how much 4CO2?
Answer:
6.761 × 10⁴ g
Explanation:
Step 1: Write the balanced combustion reaction
2 C₂H₂ + 5 O₂ ⇒ 4 CO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 20000 g of C₂H₂
The molar mass of C₂H₂ is 26.038 g/mol.
20000 g × 1 mol/26.038 g = 768.11 mol
Step 3: Calculate the moles of CO₂ produced from 768.11 moles of C₂H₂
The molar ratio of C₂H₂ to CO₂ is 2:4.
768.11 mol C₂H₂ × 4 mol CO₂/2 mol C₂H₂ = 1536.2 mol CO₂
Step 4: Calculate the mass corresponding to 1536.2 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
1536.2 mol × 44.01 g/mol = 6.761 × 10⁴ g
What is thePercent composition of dichlorine heptoxide?
Answer:
The percent composition of dichlorine heptoxide is 38.76% CI and 61.24% O
Answer:
38.76%cl and 61.24%o
Explanation:
the percent composition of dichlorine heptoxide is 38.76%Cl and 61.24%O
How many Protons, Electrons and Neutrons does Helium-6 have?
Answer:
12 neutrons
2 protons
2 electrons
Answer:
Hello There!!
Explanation:
Helium 6 has:
-two protons
-two electrons
-two neutrons
hope this helps,have a great day!!
~Pinky~
write the balanced chemical equation of the reaction between strong acid and weak base also mention the types of salt obtained in the reaction
Answer:
write the balanced chemical equation of the reaction between strong acid and weak base also mention the types of salt obtained in the reaction
Explanation:
HCl → H+(aq) + Cl−(aq) (100%)
Any acid that dissociates 100% into ions is called a strong acid. If it does not dissociate 100%, it is a weak acid. HC2H3O2 is an example of a weak acid:
HC2H3O2→ H+(aq) + C2H3O2−(aq) (~5%)
Because this reaction does not go 100% to completion, it is more appropriate to write it as an equilibrium:
HC2H3O2 ⇄ H+(aq) + C2H3O2−(aq)
As it turns out, there are very few strong acids, which are given in Table 12.2 “Strong Acids and Bases”. If an acid is not listed here, it is a weak acid. It may be 1% ionized or 99% ionized, but it is still classified as a weak acid.
Which compound is the conjugate base in the following reaction :H2SO4 + H2O —> HSO4 + H30+
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: HSO4-
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
