Answer:
Filtration
Explanation:
hope it helps and if its right can i please get brainliest
Thank You
Look at the Recording station detector on the upper left side of the Gizmo. What happens when the seismic waves hit the recording station?
Answer:
I don’t know what recording station you’re referring to but, When seismic waves reach the seismograph, a graphical record, or seismogram, is produced
Explanation:
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
The seismic wave has been the radiation, with the result of the movement of the earth surface. The movement has been result in the earthquake.
The intensity of the earthquake has been measured by seismograph on the Richter scale. The seismic wave results in the movement of the leads to the production of the seismograph.
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
For more information about earthquake, refer to the link:
https://brainly.com/question/1296104
Word Equation for Magnesium reacting with Iron Chloride
Answer:
3Mg+2FeCl3------------3MgCl2+ 3Fe
how many moles are present in 10.0 grams of sodium hydroxide
Answer:
0.25
Explanation:
no.of moles =10/40
What is the mass of phosphorus that contains twice the number of atoms found in 14
g of iron?
[Relative atomic mass : P = 31; Fe = 56]
Answer:
15.5 gm
Explanation:
What is the mass of phosphorus that contains twice the number of atoms found in 14 g of iron?
[Relative atomic mass : P = 31; Fe = 56]
14 gm Fe = 14gm/ 56 gm/mole = 14 mole gm/56gm = 14/56 mole
0.25 moles
2 X 0.25 = 0.5 moles
1 mole P = 31 gm
so
0.5 moles P =31/2 =15.5 gm
Which of the following correctly completes the statement?
Cations are always _____ than the parent atom and anions are always _____ than the parent atom.
Answer: smaller, larger
Explanation:
Cations are always {smaller} than the parent atom. Anions are always {larger} than the parent atom.
Cations are always smaller than the parent atom, and anions are always greater than the parent atom.
What is parent atom ?The term "parent atom" refers to an atom that has not yet undergone any chemical transformation. A parent atom is one that is discovered in its initial state.
Because they contain fewer electrons while maintaining the same nuclear charge, cations are always smaller than their parent atoms. Because the protons in the nucleus are holding the remaining electrons more tightly, their radii are less than those of the parent atoms. In the case of anion, this is the opposite.
Due to variations in electron-electron repulsion, the ionic radii of cations and anions are always less or bigger than the parent atom, respectively. The trends in ionic radius follow those in atomic size.
Thus, Cations are always smaller than the parent atom, and anions are always greater than the parent atom.
To learn more about parent atom, follow the link;
https://brainly.com/question/13673451
#SPJ6
Describe how you could adjust the settings of the simulation to increase the number of red (H3O+) and blue (A-) particles in the solution of equilibrium. In three to four sentences, justify your answer and explain how and why this would change the pH of the solution.
The circumstances that the system is exposed to may be altered in such a way as to cause a change in the chemical equilibrium. When we do this, we are said to be "stressing the balance."
In a chemical process that has reached equilibrium, one method is to either add or remove a product or a reactant. When more of a reactant is introduced, the equilibrium changes to alleviate the pressure, which results in the production of more products.
This is further explained below.
how and why this would change the pH of the solution.?Generally, When more product is introduced, the equilibrium moves away from products and toward reactants in an effort to lower the level of stress.
In the event that either the reactant or the product is withdrawn from the system, the equilibrium changes such that more of the corresponding substance is produced to compensate for the loss.
According to Ch/atelier's Principle, which claims that if a reaction in equilibrium is disturbed, the equilibrium will change to counterbalance that change, this indicates that if a reaction is in equilibrium, the equilibrium will alter to counteract that change.
If a solution has a large number of hydrogen ions, the pH of the solution will be low, and it will be classified as an acidic solution.
In conclusion, On the other hand, a solution is said to have a high pH and be in the basic state if it contains a low quantity of hydrogen ions in its composition.
The ratio of the concentration of hydrogen ions to the concentration of hydroxide ions is negative and inversely proportional.
Read more about equilibrium
https://brainly.com/question/28527601
#SPJ1
What is the formula for titanium (I) dichromate?
Use proper capitalization.
Enter subscripts as big numbers. For example: Water is entered H2O
What is the balanced, net ionic equation for the reaction shown below. Identify the spectator ions.
Sr(NO3)2 (aq) + H2SO4 (aq) → SrSO4 (s) + 2HNO3 (aq)
Answer:
i need an aswer for this question too
Explanation:i think the balanced net equation is s0sr4 but thats probably wrong lol
What is the pH range for an acid?
0-7
7-14
7
0
Explanation:
If the pH is between 0 and 7, then we have an acid.
If the pH is between 7 and 14, then we have an alkaline base.
If pH = 7, then it's neutral.
Answer:
0-7
Explanation:
Any substance that has a pH of less than 7 is acidic - 0 is a strong acid whereas 6 is a weak acid. A pH of 7 means that the substance is neutral. Anything above pH 7 is alkaline, pH 8 is a weak alkaline and pH 14 is a strong alkaline.Hope this helps!
Sulphuric acid (H2SO4) is titrated against 25.00cm3 of 0.200 mol/dm3 Sodium hydroxide solution (NaOH). It is found that 23.20 cm3 of sulphuric acid is required for neutralization. Calculate the concentration of Sulphuric acid
Help with this question which I attached a picture of
[tex]\huge\underline\mathtt\colorbox{cyan}{A. Element L}[/tex]
Explanation:
Because the unidentified element has exactly the same Bright-Line Spectra of wavelength in nanometeres as does element L.
[tex]\huge\bold{\purple{\bold{⚡BeBrainly⚡}}} [/tex]
4NaCl + 2SO2 + _____H2O + _____O2 → _____Na2SO4 + 4HCl
Which numbers balance this equation?
- 1,2,4
- 1,2,2
- 2,1,2
- 2,1,4
The numbers that balance the following equation: 4NaCl + 2SO2 + H2O + O2 → Na2SO4 + 4HCl is 2, 1, 2.
BALANCING EQUATION:
Balancing a chemical equation means to make sure that the number of atoms of each element on both sides of the equation are equal. According to this question, the following chemical reaction are given: 4NaCl + 2SO2 + H2O + O2 → Na2SO4 + 4HCl Some of the coefficients (numbers) have been placed there while some are missing. The equation that includes the missing coefficients (numbers) to balance the equation is:4NaCl + 2SO2 + 2H2O + O2 → 2Na2SO4 + 4HCl
Learn more at: https://brainly.com/question/21049751?referrer=searchResults
Answer:212
Explanation:yeah
How many formula units are in 0.0022 mol of NaCl (it’s urgent plz)
Answer:
1.204 × 10²¹ unitsExplanation:
The number of formula units can be found by using the formula
N = n × L
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 0.002 × 6.02 × 10²³
We have the final answer as
1.204 × 10²¹ unitsHope this helps you
What occurs as potassium nitrate is dissolved in a beaker of water, indicating that the process is endothermic?
(1) The temperature of the solution
decreases because heat was
released.
(2) The temperature of the solution increases because heat was absorbed.
(3) The solution changes color.
(4) The solution gives off a gas.
A piece of copper alloy with a mass of 85.0 g is heated from 30. °C to 45 °C. In the process, it absorbs 523 J of energy as heat. What is the specific heat of this copper alloy?
plz help me and answer this xx
Answer:
410.196 J/[kg*°C].
Explanation:
1) the equation of the energy is: E=c*m*(t₂-t₁), where E - energy (523 J), c - unknown specific heat of copper, m - mass of this copper [kg], t₂ - the final temperature, t₁ - initial temerature;
2) the specific heat of copper is:
[tex]c=\frac{E}{m*(t_2-t_1)}; \ => \ c=\frac{523}{0.085*(45-30)}=\frac{523}{1.275}=410.196[\frac{J}{kg*C}].[/tex]
Identify what the conjugate acid/base would be. FOR H3PO4?
How many valence electrons are lost by Sr when forming SrI2?
Each atom in the bond contributes one valence electron, forming a shared pair in a single covalent bond. electrons that are valence electrons of the atom. Two valence electrons are lost by Sr when forming SrI[tex]_2[/tex].
What is valence electron?A valence electron is an electron that is part of an atom's outer shell in chemistry and physics. If the outer shell is open, the valence electron can take part in the creation of a chemical bond.
The electrons in the s and p orbitals are those that are in question. Core electrons are those found in the inner shell. These electrons are vital to the majority of chemical processes because they have higher energy than the electrons in inner orbits. The electrons farthest from the nucleus are the electrons that are valence electrons of the atom. Two valence electrons are lost by Sr when forming SrI[tex]_2[/tex].
Therefore, two valence electrons are lost by Sr when forming SrI[tex]_2[/tex].
To know more about valence electron, here:
brainly.com/question/28977387
#SPJ2
When a substance is heated ,the kinetic energy of its molecules
Answer:
When a substance is heated ,the kinetic energy of its molecules also increase.
Explanation:
K.E is directly proportional to T
Help I need them fast pls
Answer:
answer
Explanation:
Ionic bond is a type of chemical bond that attract between oppositely charged ions.
the basic fact that determines molecular shapes is that
Answer:
The shape of a molecule is mostly determined by repulsion among the pairs of electrons around a central atom.
suitable electrolytes for fuel cells
Answer:
Alkaline fuel cells use an alkaline electrolyte such as potassium hydroxide or an alkaline membrane that conducts hydroxide ions rather than protons.
Explanation:
OR USE GATORADE AND POWERADE. BE A MAN.
10.00g of hydrated sodium sulfate decomposes to form 4.40g Na(2)SO(4).xH(2)O -> NaSO(4) + xH(2)O of anhydrous sodium sulfate on heating. What’s the formula mass of hydrated sodium sulfate and the value of x?
please help i have no clue!
X=10
Explanation and workout is in the photo attached with this answer
The formula mass of hydrated sodium sulfate is Na₂SO₄.10H₂O. The value of x is equal to 10.
What is the mole concept?A mole is the amount of substance containing the same number of elementary entities as the number of atoms present in a pure sample of any element.
A mole is also described as the amount of a substance that contains 6.022×10²³ fundamental entities of the given substance.
The mole concept is a convenient method of representing the amount of a substance.
Given, the mass of the hydrated sodium sulfate = 10.0g
The mass of the anhydrous sodium sulfate is produced = 4.40g
Mass of the water evaporated as water on heating = 10.0 - 4.40 = 5.6g
The number of moles of water = 5.6/18 = 0.31 mol
Similarly, the number of moles of sodium sulfate = 4.4/142.04 = 0.031 mol
The ratio of the number of the moles of the sodium sulfate and water:
[tex]\frac{n(H_2O)}{n(NaSO_4)}=\frac{0.31}{0.031} = 10[/tex]
Therefore, the ten moles of water will be evaporated for the one mole of sodium sulfate. Therefore, the formula mass is Na₂SO₄.10H₂O.
Learn more about the mole concept, here:
https://brainly.com/question/22540912
#SPJ2
1) What is the most dangerous room in the world? How is it secured?
Answer:
Radioactive Basement in Chernobyl
"We had to be especially cautious near roads and in the city of Pripyat, there are regular security patrols in those areas. Unfortunately, the legal 'day' tours are not allowed to enter any of the buildings in Pripyat as the structural integrity of some buildings is questionable."
Explanation:
Even at moderate temperatures, attractions between molecules seem to have little effect on the elasticity of gas-gas collisions because:_______.
A) They do affect molecular behaviour and we generally ignore it.
B) Collisions are so brief, and molecules moving so fast, the attractions have insufficient time to significantly affect the system.
C) Strong attractions do have an impact, but the randomness of the collisions cancel those attractions out.
D) Collisions between molecules are so rare, intermolecular forces have no measurable impact.
Even at moderate temperatures, attractions between molecules seem to have little effect on the elasticity of gas-gas collisions is as a result of Choice B: Collisions are so brief, and molecules moving so fast, the attractions have insufficient time to significantly affect the system.
As a result of the high kinetic energy of gases; the movement of gases is so fast and randomised.
As such, during gas-gas collisions; The collisions are so brief and molecules moving so fast, the attractions have insufficient time to significantly affect the system.
Read more;
https://brainly.com/question/19449287
How does Bone Marrow Donor Program work?
Name some diseases that can be cured by bone marrow transplant.
What is Donors’ Registry Program?
noooooooooooooooooooooo
Which contains more atoms, 10. 00 g of aluminum or 10. 00 g of lead? Can you explain without using mathematical conversions?.
Explanation:
divide the weight in grams by the atomic mass from the periodic table, then multiply the result by Avogadro's number..
Hope this works!!
density is 6g/mL and volume is 40 mL what is the mass
Answer:
240g
Explanation:
Using the equation m=pV, where m=mass, p=density, and V=Volume
m=(6)(40)=240
m=240
8 Fe + S8 → 8 FeS, how many moles of iron (Fe) are needed to react with 8.49 moles of sulfur (S8)?
Based on the balanced equation, the mole ratio of Iron to Sulphur is 8 to 1.
This means that for every mole of sulfur, 8 moles of iron is needed for the reaction.
∴ since the moles of Sulfur = 8.49 moles
⇒ moles of Iron = 8.49 moles × 8
= 67.92 moles
Calculate the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy.
Q = mcΔT
The specific heat of water is 4.18 J/g°C.
Taking into account the definition of calorimetry, the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy is 86.12 C.
In first place, calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is the amount of heat that a body can receive or give up without affecting its molecular structure. If the molecular structure does not change, the state (solid, liquid, gaseous) does not change. Since the molecular structure does not change, a change in temperature is observed.
In other words, sensible heat is the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case, you know:
Q= 1800 J c= 4.18 [tex]\frac{J}{gC}[/tex] m= 5 g ΔT= ?Replacing in the expression to calculate heat exchanges:
1800 J= 4.18[tex]\frac{J}{gC}[/tex]× 5 g× ΔT
Solving:
1800 J ÷ (4.18[tex]\frac{J}{gC}[/tex]× 5 g)= ΔT
ΔT= 86.12 C
In summary, the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy is 86.12 C.
Learn more:
brainly.com/question/11586486?referrer=searchResults brainly.com/question/24724338?referrer=searchResultsWho know the answers for both of these or know were to get them from
Answer:
kdkekejdjejeneneenendjenejekeke do do do do do do d
Answer:
go ahead bro
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
