The complete question is: Fill the blanks with appropriate coefficient number for the reaction equation- __AgNO3 + __Cu → __Ag + __Cu(NO3)2
Answer: The complete reaction equation is [tex]AgNO_{3} + Cu \rightarrow Ag + Cu(NO_{3})_{2}[/tex]
Explanation:
A chemical equation which contains same number of atoms on both reactant and product side is called a balanced chemical equation.
For example, [tex]AgNO_{3} + Cu \rightarrow Ag + Cu(NO_{3})_{2}[/tex]
Here, number of atoms present on reactant side is as follows.
Ag = 1[tex]NO_{3}[/tex] = 1Cu = 1Number of atoms present on product side is as follows.
Ag = 1[tex]NO_{3}[/tex] = 2Cu = 1To balance this equation, multiply [tex]AgNO_{3}[/tex] by 2 on reactant side and multiply Ag by 2 on product side. Hence, the equation can be re-written as follows.
[tex]2AgNO_{3} + Cu \rightarrow 2Ag + Cu(NO_{3})_{2}[/tex]
Now, the number of atoms present on reactant side are as follows.
Ag = 2[tex]NO_{3}[/tex] = 2Cu = 1Number of atoms present on product side are as follows.
Ag = 2[tex]NO_{3}[/tex] = 2Cu = 1Thus, we can conclude that the complete reaction equation is [tex]AgNO_{3} + Cu \rightarrow Ag + Cu(NO_{3})_{2}[/tex].
1. _C2H5OH + _O2 = _CO2 + _H2O
2. _Zn + _CuSO4 = _ZnSO4 + _Cu
3. _Ca + _AICI = _CaCl2 + _Al
4. _Hg(OH)2 + _H3PO4 = _Hg3(PO4)2 + _H20
5. _H3PO3 +_H3PO4 + _PH3
6. _C25H52 + _O2 = _CO2 + _H20
7. _Au2O3 = _Au + _O₂
8. _KBr + _Cl2 = _KCI + _Br2
9. _C4H10 + _O₂ = CO₂+ _H₂O
10. P4 + O2 = P₂O5
Answer:1. Ethanol + Dioxygen = Carbon Dioxide + Water
Explanation:
Use the equation below to answer the following question
2NaHCO3(aq) + Ca(H2PO4)2 (aq) → Na2HPO4 (aq) + CaHPO4 (aq) + 2002 (8) + 2H20 (0)
The theoretical yield of CHPO, is 10 g. If 8 g of CaHPO4 are produced from the reaction shown above, what is the percent yield of CHPO ?
Answer:
Percent Yield = 80%
Explanation:
Percent yield of a reaction is defined as one hundred times the ratio between the actual yield and the theoretical yield. That is:
Percent yield = Actual Yield / Theoretical Yield * 100
Where theoretical yield of CaHPO4 is 10g and actual yield is 8g
Replacing:
Percent yield = 8g / 10g * 100
Percent Yield = 80%Group 1 period 3 on periodic table
Answer:
unable to compute
Explanation:
The radioisotope radon-222 has a half-life of 3.8 days. How much of a 73.9-g sample of radon- (3 222 would be left after approximately 23 days?
Answer:
1.115 g
Explanation:
Applying,
R = R'[tex]2^{n/t}[/tex]................... Equation 1
Where R = original sample of radon-222, R' = sample of radon-222 left after decay, n = Total time, t = half-life.
make R' the subject of the equation
R' = R/([tex]2^{n/t}[/tex])............... Equation 2
From the question,
Given: R = 73.9 g, n = 23 days, t = 3.8 days.
Substitute these values into equation 2
R' = 73.9/([tex]2^{23/3.8}[/tex])
R' = 73.9/[tex]2^{6.05}[/tex]
R' = 1.115 g
Calculate the mass of hydrogen in 250 grams of C2H6
Answer:
50.28 grams
Explanation:
hope this helps
What is the organelle that builds the protein molecules using the instructions from the genes?
1 Gene version
2 nucleus
3 ribosomes
4DNA
5 Golgi Bodies
Which salt is produced when NH4OH reacts with HNO3?
KNO2
NaNO3
NH4NO3
NH4NO2
The salt produced in the neutralization reaction between NH₄OH and HNO₃ is NH₄NO₃ (ammonium nitrate).
What is a neutralization reaction?A neutralization reaction is a reaction between an acid and a base to form salt and water. The cation of the salt will come from the base while its anion will come from the acid.
Let's consider the neutralization reaction between NH₄OH and HNO₃. The formed salt will be ammonium nitrate.
NH₄OH + HNO₃ ⇒ NH₄NO₃ + H₂O
The salt produced in the neutralization reaction between NH₄OH and HNO₃ is NH₄NO₃ (ammonium nitrate).
Learn more about neutralization here: https://brainly.com/question/12442828
#SPJ1
A ball falls 5 m and then bounces to a height of 3 m. What height is the best
reference point for the motion of the ball?
A. 2 m
B. Om
C. 5 m
D. 3 m
SUBMIT
What is Geothermal Energy?
Answer:
Geothermal energy is basically the thermal energy generated and stored in the Earth. It is the energy that determines the temperature of matter.
Explanation:
I hope this helped :)
Answer:
Geothermal energy is heat that's inside of the ground. It is a renewable energy source because heat is constantly being produced inside of the earth.
Explanation: Hope this helps! :)
(True or false) The water molecule can be either an acid or a base. Justify.
Answer:
TRUE!!!!
Explanation:
Water can act as both an acid and a base in solution and undergoes autoionization, where it can be both an acid and a base to itself. When mixed with an acid, water accepts hydrogen ions and acts as a base. However, when water is mixed with a base, it donates hydrogen ions and acts like an acid.
Not my words! I hope this helps :)
what is the slope of the line segment
-3
-1/3
1/3
3
Answer:
slope = 3
Explanation:
[tex]slope = \frac{3 - 0}{1 - 0} \\ = 3[/tex]
Which of the following correctly ranks the following bonds in order from most to least polar?
C-H, N-H, O-H, F-H
a)
O-H > F-H > N-H > C-H
b)
F-H > N-H > O-H > C-H
c)
C-H > N-H > O-H > F-H
d)
F-H > O-H > N-H > C-H
Answer:
O-H F-H N-Hy
Explanation:
C-H N-H O-H F-H
what rule/principle states that electrons fill orbitals from lowest energy to highest enegery?
Answer:
The Aufbau Principle
Explanation:
In the ground state of an atom or ion, electrons fill atomic orbitals of the lowest available energy level before occupying higher-energy levels.
Answer:
Aufbau principle
Explanation:
edge 2021
Which statement describes one way that nuclear fission differs from nuclear fusion?
Answer:
Nuclear fission is used to produce electrical power.
Explanation:
Both types of nuclear reaction require high temperatures
Answer:
D
Explanation:
A carbon atom that is surrounded by four hydrogen atoms has a _____ molecular geometry. This geometry results from the arrangement of the _____ hybrid orbitals around the carbon atom. They are formed when the s-orbital and ______ -orbitals mix, or hybridize.
Answer:
Tetrahedral, sp3, p
Explanation:
C has 4 bonds and hence its tetrahedral shape with 109.5 degrees. since there are 4 bonds, it is sp3
Answer:
A carbon atom that is surrounded by four hydrogen atoms has a
✔ tetrahedral
molecular geometry.
This geometry results from the arrangement of the
✔ four sp3
hybrid orbitals around the carbon atom.
They are formed when the s-orbital and
✔ three p
-orbitals mix, or hybridize.
Explanation:
If the pH = 6.5, what is the [H+]? *
3.16 x 10-7
3.16 x 10-6
O
3.16 x 10-5
Answer:
Key Concepts
The hydrogen ion concentration in a solution, [H+], in mol L-1, can be calculated if the pH of the solution is known.
pH is defined as the negative logarithm (to base 10) of the hydrogen ion concentration in mol L-1 pH = -log10[H+] ...
[H+] in mol L-1 can be calculated using the equation (formula): [H+] = 10-pH
More items...
Explanation:
Answer:
[tex]pH = - log[H {}^{ + } ] \\ 6.5 = - log[H {}^{ + } ] \\ [H {}^{ + } ] = {10}^{ - 6.5} \\ [H {}^{ + } ] = 3.16 \times {10}^{ - 7} \: mol {dm}^{ - 3} [/tex]
show using dots to illustrate high population density and low population density in the boxes provided in answer to guide questions
Answer:
Just add a plenty of dots in the first one and very few dots in the second one
An area with high population density will have many dots while areas will low population density will have few dots when using dots to illustrate population density.
What is population density?Population density is the ratio of the total number of organisms found in a given area to the total of the area of that place or habitat.
Population density = total number of organisms/total areaAn area with high population density indicates that more organised ate found per unit area than an area with low population density.
Therefore, using dots to illustrate population density, an area with high population density will have plenty dots while areas will low population density will have few dots scattered over.
Learn more about population density at: https://brainly.com/question/13902749
Which of the following terms best describes the oxide of a metal?
Answer:
Zinc oxide is a metal oxide the term best describes the nature of zinc oxide is an amphoteric oxide.
Explanation:
Please Mark me brainlist
Suppose that we combined 75 g of magnesium with 45 g of nitrogen and heat them up. Predict the product of
the reaction, determine the limiting reactant, and calculate the theoretical yield.
Answer:
Mg is the limiting reactant
The theoretical yield is 105.2 g of Mg3N2
Explanation:
3Mg(s) + N2(g) -----> Mg3N2(s)
Number of moles of Mg = 75g/24g/mol = 3.125 moles
3 moles of Mg yields 1 mole of Mg3N2
3.125 moles of Mg yields 3.125 × 1/3 = 1.042 moles of Mg3N2
Number of moles of N2 = 45g/28g/mol = 1.607 moles
1 mole of N2 yields 1 mole of Mg3N2
1.607 moles of N2 yields 1.607 moles Mg3N2
Hence, Mg is the limiting reactant
The theoretical yield of Mg3N2 = 1.042 moles of Mg3N2 × 101 g/mol = 105.2 g of Mg3N2
Can anyone solve this for me please.
I appreciate anyone that is helping me with these questions
What can be found in the Asteroid Belt?
Answer:
astrioids can be found at the astrioid belt
Answer:
Composition. Most of the asteroids in the Main Belt are made of rock and stone, but a small portion of them contain iron and nickel metals. The remaining asteroids are made up of a mix of these, along with carbon-rich materials. Some of the more distant asteroids tend to contain more ices
How many atoms of NaCl are present in 11.0 moles?
58 atoms
642 atoms
6.62 x 1024 atoms
3.51 x 1025 atoms
Answer:
6.62 × 10²⁴
Explanation:
wanna have fun?
The number of NaCl present in the 11 moles is equal to 6.62 × 10²⁴ NaCl. Therefore, option (C) is correct.
What is Avogadro's number?Avogadro’s number is used to express the number of entities in one mole of a chemical substance. Generally, these entities can be ions, molecules, atoms, electrons, or protons, which depends upon the type of chemical reaction.
The value of Avogadro’s constant is experimentally found approximately equal to 6.022 × 10²³ mol⁻¹.
Given, the number of moles of the NaCl = 11.0 mol
The molar mass of the NaCl = 23 + 35.5 = 58.5 g/mol
One mole of NaCl has formula units of NaCl = 6.022 × 10²³
Then 11 moles of NaCl have formula units of NaCl = 11 × 6.022 × 10²³
= 6.62 × 10²⁴ NaCl
Therefore,6.62 × 10²⁴ formula units of NaCl are present in 11 moles of NaCl.
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ2
calculate the molecular weight of CaCO3.
Answer:
Explanation:
CaCO3 = 1*Ca + 1*C + 3*O
=1*40 + 1*12 + 3*16
=40 + 12 + 48
=100 amu
How many grams of NaCl are dissolved in 500.0 mL of a 0.050 M solution of NaCl?
Answer: 1.461 g of NaCl is dissolved in the solution.
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Given mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of solution = 0.050 M
Molar mass of NaCl = 58.44 g/mol
Volume of solution = 500.0 mL
Putting values in equation 1, we get:
[tex]0.050=\frac{\text{Given mass of NaCl}\times 1000}{58.44\times 500}\\\\\text{Given mass of NaCl}=\frac{0.050\times 58.44\times 500}{1000}\\\\\text{Given mass of NaCl}=1.461g[/tex]
Hence, 1.461 g of NaCl is dissolved in the solution.
Electromagnetic vs. Mechanical Waves 1?
Answer:
example of electromagnetic waves water waves and sound wave.
Types of mechanical waves are transverse and longitudinal wave...
how does evelyn hear music?
Please! I need help
Describe how water molecules can hydrate various substances.
Answer:
The two hydrogen atoms and one oxygen atom within water molecules (H2O) form polar covalent bonds. ... As a result of water's polarity, each water molecule attracts other water molecules because of the opposite charges between them, forming hydrogen bonds.
Explanation:
Not my work, but I hope this helps!
How many significant figures are in this number?
3x10^6
If it's right 30 POINTS !!!!!!!
After a 4.626g sample of silver oxide is heated, 4.306g of silver metal remains. What is the empirical formula of the compound?
please help me :(
Answer:
The empirical formula is Ag2O.
The empirical formula is Ag2O.Explanation:
The empirical formula is Ag2O.Explanation:The empirical formula is the simplest whole-number ratio of atoms in a compound.
The empirical formula is Ag2O.Explanation:The empirical formula is the simplest whole-number ratio of atoms in a compound.The ratio of atoms is the same as the ratio of moles. So our job is to calculate the molar ratio of Ag to 2O.
do the steps ...
To get this into an integer ratio, we divide both numbers by the smaller value.
From this point on, I like to summarize the calculations in a table.
ElementAgMass/gXMolesXllRatiomllIntegers
mAgXXXm7.96Xm0.07377Xll2.00mmm2
mlOXXXXl0.59mm0.0369Xml1mmmml1
There are 2 mol of Ag for 1 mol of O.
Answer:
Hello There!!
Explanation:
The answer is↬The empirical formula is Ag2O. It is the simplest whole-number ratio of atoms in a compound.
hope this helps,have a great day!!
~Pinky~
A 25 Ω resistor has a voltage drop of 12 V across it. Calculate the current flowing through the resistor
Answer:
0.48
Explanation:
[tex]i = \frac{v}{r} [/tex]
because we are looking for I which is current we say
I = 12÷25 which is 0.48.
The current flowing through the resistor is 0.48 A.
What is resistor?The resistor is a length of wire which resists the flow of current.
According to Ohm's law, the potential difference is proportional to the current flowing in the circuit.
V =I R where R is the resistance.
Given is the resistance of resistor R = 25Ω and the voltage drop V =12 Volt, then the current through the resistor will be
I =V/R
I = 12/25
I =0.48 A
Thus, the current in resistor is 0.48 Amperes.
Learn more about resistor.
https://brainly.com/question/24297401
#SPJ2
