Answer:
ΔT=[tex]0.87^{\circ}C[/tex]
Explanation:
Para esta pregunta debemos recordar la ecuación que nos permite calcular el aumento ebulliscopico (aumento del punto de ebullición):
ΔT=[tex]Kb*m[/tex]
Donde ΔT es el valor del aumento del punto de ebullición. Kb es la constante ebulloscopica para el agua ([tex]0.512\frac{Kg~^{\circ}C}{mol}[/tex]) y m es la molalidad ([tex]m=\frac{mol}{Kg~ of~ solvente}[/tex]).
Por lo tanto el primer paso es calcular la molalidad de la solución. Para lo cual tendremos que calcular las moles de sal en los 25 g. Si queremos hacer esto debemos recordar que la formula de sal de mesa es NaCl y que la masa molar de NaCl es 58.44 g/mol. Por lo tanto:
[tex]25~g~NaCl\frac{1~mol~NaCl}{58.44~g~NaCl}~=~0.42~mol~NaCl[/tex]
Ahora bien, también debemos saber los Kg de agua en la solución. Por lo que podemos usar la densidad del agua (1 g/mL) para convertir de mL a g y luego hacer la conversión a Kg:
[tex]250~mL\frac{1~g}{1~mL}\frac{1~Kg}{1000~g}~=~0.25~Kg[/tex]
Finalmente para el calculo de la molalidad podemos dividir los dos valores:
[tex]m=\frac{0.42~mol}{0.25~Kg}=1.68[/tex]
Con el valor de la molalidad se puede calcular ΔT al reemplazar los valores:
ΔT=[tex]1.68~\frac{mol}{Kg}*0.52\frac{Kg~^{\circ}C}{mol}=0.87^{\circ}C[/tex]
Si la temperatura de ebullición normal del agua es 100 ºC. Podemos calcular la temperatura final si adicionamos ΔT:
Temperatura final = 100 + 0.87 = 100.87 ºC
Espero sea de ayuda!
What is the frequency of a photon having an energy of 4.91 × 10–17 ? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s)
Answer:
The frequency of the photon is 7.41*10¹⁶ Hz
Explanation:
Planck states that light is made up of photons, whose energy is directly proportional to the frequency of radiation, according to a constant of proportionality, h, which is called Planck's constant. This is expressed by:
E = h*v
where E is the energy, h the Planck constant (whose value is 6.63*10⁻³⁴ J.s) and v the frequency (Hz or s⁻¹).
So the frequency will be:
[tex]v=\frac{E}{h}[/tex]
Being E= 4.91*10⁻¹⁷ J and replacing:
[tex]v=\frac{4.91*10^{-17} J}{6.63*10^{-34} J.s}[/tex]
You can get:
v= 7.41*10¹⁶ [tex]\frac{1}{s}[/tex]= 7.41*10¹⁶ Hz
The frequency of the photon is 7.41*10¹⁶ Hz
A baseball has a mass of 0.145 kilograms. If acceration due to gravity is 9.8m/s,what is the weight of the baseball in newtons?
Answer:
I hope it works
Explanation:
As we know that
w=m*g
given m=0.145 , g=9.8
hence we get
w= (9.8)*(0.145)
w=1.421 m/sec 2
if its help-full thank hit the stars and brain-list it thank you
4. Given that the enthalpy of reaction for a system at 298 K is -292 kJ/mol and the entropy for that system is 224 J/mol K, what's the free energy for the system?
A.-87,793 kJ
B.-358 kJ
C.-225 kJ
D. -66,751 kJ
Answer:
[tex]\Delta G=-359\frac{kJ}{mol}[/tex]
Explanation:
Hello,
In this case, we must remember that the Gibbs free energy is defined in terms of the enthalpy, temperature and entropy as shown below:
[tex]\Delta G=\Delta H -T\Delta S\\[/tex]
In such a way, for the given data, we obtain it, considering the conversion from J to kJ for the entropy in order to conserve the proper units:
[tex]\Delta G=-292\frac{kJ}{mol} -(298)(224\frac{J}{mol}*\frac{1kJ}{1000J} )\\\\\Delta G=-359\frac{kJ}{mol}[/tex]
Best regards.
Answer:
B- 358 kj
Explanation: I took the test
Which response includes all the following processes that are accompanied by an increase in entropy? 1) 2SO 2(g) + O 2(g) → SO 3(g) 2) H 2O(l) → H 2O(s) 3) Br 2(l) → Br 2(g) 4) H 2O 2(l) → H 2O(l) + 1/ 2O 2(g)
Answer: Reaction (1) , (3) and (4) are accompanied by an increase in entropy.
Explanation:
Entropy is the measure of randomness or disorder of a system. If a system moves from an ordered arrangement to a disordered arrangement, the entropy is said to decrease and vice versa.
(1) [tex]2SO_2(g)+O_2(g)\rightarrow SO_3(g)[/tex]
3 moles of reactant are changing to 1 mole of product , thus the randomness is increasing. Thus the entropy also increases.
2) [tex]H_2O(l)\rightarrow H_2O(s)[/tex]
1 mole of Liquid reactant is changing to 1 mole of solid product , thus the randomness is decreasing. Thus the entropy also decreases.
3) [tex]Br_2(l)\rightarrow Br_2(g)[/tex]
1 mole of Liquid reactant is changing to 1 mole of gaseous product , thus the randomness is increasing. Thus the entropy also increases.
4) [tex]H_2O_2(l)\rightarrow H_2O(l)+\frac{1}{2}O_2(g)[/tex]
1 mole of Liquid reactant is changing to half mole of gaseous product and 1 mole of liquid product, thus the randomness is increasing. Thus the entropy also increases.
Consider the reaction for the dissolution of solid magnesium hydroxide.
Mg(OH)2(s)g2 (a) +2OH (ag)
If the concentration of hydroxide ion in a saturated solution of magnesium hydroxide is 2.24 x 104 M.
what is the molar solubility of magnesium hydroxide? Report your answer in scientific notation with three significant figures.
Answer:
Molar solubility is 1.12x10⁻⁴M
Explanation:
The dissolution of magnesium hydroxide is:
Mg(OH)₂(s) ⇄ Mg²⁺ + 2OH⁻
The molar solubility represents the moles of the solid that the solution can dissolve, that could be written as:
Mg(OH)₂(s) ⇄ X + 2X
Where X is solubility.
If you obtained a [OH⁻] = 2.24x10⁻⁴M and you know [OH⁻] = 2X:
2X = 2.24x10⁻⁴M
X = 2.24x10⁻⁴M/2
X =1.12x10⁻⁴M
Molar solubility is 1.12x10⁻⁴M
In the experiment students will create solutions with different ratios of ethanol and water. What is the mole fraction of ethanol when 10.00 mL of pure ethanol is combined with 2.00 mL of water
Answer:
[tex]x_{et}=0.6068[/tex]
Explanation:
Hello,
In this case, since the mole fraction of a compound, in this case ethanol, in a binary mixture, in this constituted by both water and ethanol, is mathematically defined as follows:
[tex]x_{et}=\frac{n_{et}}{n_{et}+n_{w}}[/tex]
Whereas [tex]n[/tex] accounts for the moles in the solution for each species, we must first compute the moles of both ethanol (density: 0.789 g/mL and molar mass: 46.07 g/mol) and water (density: 1g/mL and molar mass: 18.02 g/mol)
[tex]n_{et}=10.00mL\ et*\frac{0.789g\ et}{mL\ et} *\frac{1mol\ et}{46.07g\ et}=0.1713mol\ et\\ \\n_w=2.00mL\ w*\frac{1g\ w}{mL\ w} *\frac{1mol\ w}{18.02g\ w}=0.1110mol\ w[/tex]
Therefore, the mole fraction turns out:
[tex]x_{et}=\frac{0.1713mol}{0.1713mol+0.1110mol}\\\\x_{et}=0.6068[/tex]
Best regards.
How many liters of CH₃OH gas are formed when 3.20 L of H₂ gas are completely reacted at STP according to the following chemical reaction? Remember 1 mol of an ideal gas has a volume of 22.4 L at STP.CO(g)+ H2(g) → CH3OH
Answer:
The correct answer is 1.60 Liters.
Explanation:
The given reaction:
CO (g) + H₂(g) ⇔ CH₃OH (g)
Based on the given reaction, two moles of H₂ reacts with one mole of CO and produce one mole of CH₃OH.
It is mentioned that 3.20 L of H₂ is reacted, therefore, there is a need to convert it into moles.
As 22.4 L at standard temperature and pressure is equivalent to 1 mole.
Therefore, 1 L at STP will be, 1/22.4 mole
Now 3.20 L at STP will be,
= 1/22.4 × 3.20
= 0.1428 mole
And as mentioned in the reaction that 2 moles of H₂ gives 1 mole of CH₃OH, therefore, 1 mole of H₂ will give 1/2 mole of CH₃OH
Now, 0.1428 mole of H₂ will give,
= 0.1428/2 = 0.071 mole of CH₃OH
= 0.071 × 22.4 = 1.60 L
The volume, in liters, of CH₃OH gas formed is 1.60 L
From the question,
We are to determine the volume of CH₃OH formed
The given chemical equation for the reaction is
CO(g)+ H₂(g) → CH₃OH
The balanced chemical equation for the reaction is
CO(g)+ 2H₂(g) → CH₃OH
This means
1 mole of CO reacts with 2 moles of H₂ to produce 1 mole of CH₃OH
Now, we will determine the number of moles of H₂ present in the 3.20 L H₂ at STP
1 mol of an ideal gas has a volume of 22.4 L at STP
Then,
x mole of the H₂ gas will have a volume of 3.20 L at STP
x = [tex]\frac{3.20 \times 1}{22.4}[/tex]
x = 0.142857 mole
∴ The number of mole of H₂ present is 0.142857 mole
Since
2 moles of H₂ reacts to produce 1 mole of CH₃OH
Then,
0.142857 mole of H₂ will react to produce [tex]\frac{0.142857}{2}[/tex] mole of CH₃OH
[tex]\frac{0.142857}{2} = 0.0714285[/tex]
∴ The number of moles of CH₃OH produced = 0.0714285 mole
Now, for the volume of CH₃OH formed
Since
1 mol of an ideal gas has a volume of 22.4 L at STP
Then,
0.0714285 mol of CH₃OH will have a volume of 22.4 × 0.0714285 at STP
22.4 × 0.0714285 = 1.5999984 L ≅ 1.60 L
Hence, the volume of CH₃OH gas formed is 1.60 L
Learn more here: https://brainly.com/question/13899989
Hydrazine, , emits a large quantity of energy when it reacts with oxygen, which has led to hydrazine used as a fuel for rockets: How many moles of each of the gaseous products are produced when 20.1 g of pure hydrazine is ignited in the presence of 20.1 g of pure oxygen
Answer:
[tex]1.25~mol~H_2O[/tex] and [tex]0.627~mol~N_2[/tex]
Explanation:
Our goal for this question is the calculation of the number of moles of the molecules produced by the reaction of hydrazine ([tex]N_2H_4[/tex]) and oxygen ([tex]O_2[/tex]). So, we can start with the reaction between these compounds:
[tex]N_2H_4~+~O_2~->~N_2~+~H_2O[/tex]
Now we can balance the reaction:
[tex]N_2H_4~+~O_2~->~N_2~+~2H_2O[/tex]
In the problem, we have the values for both reagents. Therefore we have to calculate the limiting reagent. Our first step, is to calculate the moles of each compound using the molar masses values (32.04 g/mol for [tex]N_2H_4[/tex] and 31.99 g/mol for [tex]O_2[/tex]):
[tex]20.1~g~N_2H_4\frac{1~mol~N_2H_4}{32.04~g~N_2H_4}=0.627~mol~N_2H_4[/tex]
[tex]20.1~g~O_2\frac{1~mol~O_2}{31.99~g~O_2}=0.628~mol~O_2[/tex]
In the balanced reaction we have 1 mol for each reagent (the numbers in front of [tex]O_2[/tex] and [tex]N_2H_4[/tex] are 1). Therefore the smallest value would be the limiting reagent, in this case, the limiting reagent is [tex]N_2H_4[/tex].
With this in mind, we can calculate the number of moles for each product. In the case of [tex]N_2[/tex] we have a 1:1 molar ratio (1 mol of [tex]N_2[/tex] is produced by 1 mol of [tex]N_2H_4[/tex]), so:
[tex]0.627~mol~N_2H_4\frac{1~mol~N_2}{1~mol~N_2H_4}=~0.627~mol~N_2[/tex]
We can follow the same logic for the other compound. In the case of [tex]H_2O[/tex] we have a 1:2 molar ratio (2 mol of [tex]H_2O[/tex] is produced by 1 mol of [tex]N_2H_4[/tex]), so:
[tex]0.627~mol~N_2H_4\frac{2~mol~H_2O}{1~mol~N_2H_4}=~1.25~mol~H_2O[/tex]
I hope it helps!
If the Ksp for Li3PO4 is 5.9×10−17, and the lithium ion concentration in solution is 0.0020 M, what does the phosphate concentration need to be for a precipitate to occur?
Answer:
7.4 × 10⁻⁹ M
Explanation:
Step 1: Given data
Solubility product constant (Ksp) for Li₃PO₄: 5.9 × 10⁻¹⁷
Concentration of lithium ion: 0.0020 M
Step 2: Write the reaction for the solution of Li₃PO₄
Li₃PO₄(s) ⇄ 3 Li⁺(aq) + PO₄³⁻(aq)
Step 3: Calculate the phosphate concentration required for a precipitate to occur
The solubility product constant is:
Ksp = 5.9 × 10⁻¹⁷ = [Li⁺]³ × [PO₄³⁻]
[PO₄³⁻] = 5.9 × 10⁻¹⁷ / [Li⁺]³
[PO₄³⁻] = 5.9 × 10⁻¹⁷ / 0.0020³
[PO₄³⁻] = 7.4 × 10⁻⁹ M
The half-life of Zn-71 is 2.4 minutes. If one had 100.0 g at the beginning, how many grams would be left after 7.2 minutes has elapsed? Report your answer to 1 decimal place.
Answer:
12.5g
Explanation:
Half life = 2.4 Minutes.
The half life of a compound is the time it takes to decay to half of it's original concentration or mass.
Time lapsed= 7.2 minutes. This is equivalent to 3 half lives ( 3 * 2.4)
Initial mass = 100g
First half life;
100g --> 50g
Second half life;
50g --> 25g
Third half life;
25g --> 12.5g
The amount of Zn-71 that remains after 7.2 mins has elapsed is 12.5 g
We'll begin by calculating the number of half-lives that has elapsed. This can be obtained as follow:
Half-life (t½) = 2.4 mins
Time (t) = 7.2 mins
Number of half-lives (n) =?[tex]n = \frac{t}{t_{1/2}} \\\\n = \frac{7.2}{2.4} \\\\[/tex]
n = 3Thus, 3 half-lives has elapsed.
Finally, we shall the amount remaining. This can be obtained as follow:Original amount (N₀) = 100 g
Number of half-lives (n) = 3
Amount remaining (N) =?[tex]N = \frac{N_{0}}{2^{n}} \\\\N = \frac{100}{2^{3 }}\\\\N = \frac{100}{8}\\\\[/tex]
N = 12.5 gThus, the amount of Zn-71 that remains after 7.2 mins is 12.5 g
Learn more: https://brainly.com/question/9561011
Identify the term that matches each electrochemistry definition. The electrode where oxidation occurs Cathode The electrode where reduction occurs Choose... An electrochemical cell powered by a spontaneous redox reaction Choose... An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction Choose... A chemical equation showing either oxidation or reduction Choose...
Answer:
An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction
Draw the structure of beeswax.beeswax is made from the esterfication of a saturated 16-carbon fatty acid and a 30 carbon straight chain primary alcohol.
Answer:
Triacontyl palmitate
Explanation:
In this case, we have a reaction between an acid and an alcohol. When we put together these kind of compounds an ester is produced. This reaction is called "esterification".
In our case, the alcohol is a structure with 30 carbon in which the "OH" group is bonded on carbon 1. The name of this compound is "n-triacontanol". The acid is a structure in which we have 16 carbon in which the "COOH" group is placed on carbon 1. The name of this compound is "palmitic acid". The ester produced by the acid and the alcohol is "Triacontyl palmitate".
See figure 1.
I hope it helps!
clacium hydroxide is slightly soluable in water about 1 gram will dissolve in 1 liter what are the spectator ions in the reaction ions in the reaction of such a dilute solution of calcium hydroxide with hydrochloric acid
Answer:
Ca²⁺ and Cl⁻
Explanation:
In a chemical reaction, spectator ions are ions that are not involved in the reaction, that means are the same before and after the reaction.
In water, calcium hydroxide, Ca(OH)₂ is dissociated in Ca²⁺ and OH⁻. Also, hydrochloric acid, HCl, dissociates in H⁺ and Cl⁻. The reaction is:
Ca²⁺ + 2OH⁻ + 2H⁺ + 2Cl⁻ → 2H₂O + Ca²⁺ + 2Cl⁻
The ions that react are H⁺ and OH⁻ (Acid and base producing water)
And the ions that are not reacting, spectator ions, are:
Ca²⁺ and Cl⁻A sample of a hydrocarbon is found to contain 7.99g carbon and 2.01g hydrogen. What is the empirical formula for this compound
Answer:
The empirical formulae for the compound is CH3.
Which of the following pairs of chemical reactions are inverses of each other? Answer options: a. Hydrogenation and alkylation b.Halogenation and hydrolysis c. Ammoniation and alkylation d. Oxidation and reduction
Answer:
d. Oxidation and reduction
Explanation:
For this question we have to remember the definition of each type of reaction:
-) Hydrogenation
In this reaction, we have the addition of hydrogen to a molecule. Usually, an alkene or alkyne. In the example, molecular hydrogen is added to a double bond to produce an alkane.
-) Alkylation
In this reaction, we have the addition of a chain of carbon to another molecule. In the example, an ethyl group is added to a benzene ring.
-) Hydrolysis
In this reaction, we have the breaking of a bond by the action of water. In the example, a water molecule can break the C-O bond in the ester molecule.
-) Halogenation
In this reaction, we have the addition of a halogen (atoms on the VIIIA group). In the example, "Cl" is added to the butene.
-) Ammoniation
In this reaction, we have the addition of the ammonium ion ([tex]NH_4^+[/tex]). In the example, the ammonium ion is added to an acid.
-) Oxidation and reduction
In this reaction, we have opposite reactions. The oxidation is the loss of electrons and the reduction is the gain of electrons. For example:
[tex]Ag^+~+~e^-~->~Ag[/tex] Reduction
[tex]Al~->~Al^+^3~+~3e^-[/tex] Oxidation
what is the molality of a solution
Answer: The number of moles of a solute per kilogram of solvent
Explanation:
g When considering the effects of temperature on spontaneity, if both ΔH and ΔS are positive, _______. Select the correct answer below: the process is spontaneous at all temperatures
Explanation:
The spontaneity of a system is deduced by the sign of the gibbs free energy value. If it is negative, it means the process / reaction is spontaneous however a positive value indicates the such process is not spontaneous.
Gibbs free energy, enthalpy and entropy are related by the following equation;
ΔG = ΔH - TΔS
A positive value of enthalpy, H and entropy, S means that G would always be a negative value at all temperatures.
To find the pH of a solution of NH4Br directly, one would need to use:__________
Select the correct answer below:
a) the Kb of NH3 to find the hydroxide concentration
b) the Ka of NH+4 to find the hydronium concentration
c) the Kb of NH3 to find the hydronium concentration
d) the Ka of NH+4 to find the hydroxide concentration
Answer:
b) the Ka of NH₄⁺ to find the hydronium concentration
Explanation:
The equilbrium of NH₄⁺ (The conjugate acid of NH₃, a weak base), is:
NH₄⁺ ⇄ NH₃ + H⁺
Where Ka of the conjugate acid is:
Ka = [NH₃] [H⁺] / [NH₄⁺]
Thus, if you know Ka of NH₄⁺ and its molar concentration you can calculate [H⁺], the hydronium concentration, to find pH (Because pH = -log [H⁺])
Thus, right option is:
b) the Ka of NH₄⁺ to find the hydronium concentrationWill a precipitate of magnesium fluoride form when 300. mL of 1.1 × 10 –3 M MgCl 2 are added to 500. mL of 1.2 × 10 –3 M NaF? [K sp (MgF 2) = 6.9 × 10 –9]
Answer:
No precipitate is formed.
Explanation:
Hello,
In this case, given the dissociation reaction of magnesium fluoride:
[tex]MgF_2(s)\rightleftharpoons Mg^{2+}+2F^-[/tex]
And the undergoing chemical reaction:
[tex]MgCl_2+2NaF\rightarrow MgF_2+2NaCl[/tex]
We need to compute the yielded moles of magnesium fluoride, but first we need to identify the limiting reactant for which we compute the available moles of magnesium chloride:
[tex]n_{MgCl_2}=0.3L*1.1x10^{-3}mol/L=3.3x10^{-4}molMgCl_2[/tex]
Next, the moles of magnesium chloride consumed by the sodium fluoride:
[tex]n_{MgCl_2}^{consumed}=0.5L*1.2x10^{-3}molNaF/L*\frac{1molCaCl_2}{2molNaF} =3x10^{-4}molMgCl_2[/tex]
Thus, less moles are consumed by the NaF, for which the moles of formed magnesium fluoride are:
[tex]n_{MgF_2}=3x10^{-4}molMgCl_2*\frac{1molMgF_2}{1molMgCl_2}=3x10^{-4}molMgF_2[/tex]
Next, since the magnesium fluoride to magnesium and fluoride ions is in a 1:1 and 1:2 molar ratio, the concentrations of such ions are:
[tex][Mg^{2+}]=\frac{3x10^{-4}molMg^{+2}}{(0.3+0.5)L} =3.75x10^{-4}M[/tex]
[tex][F^-]=\frac{2*3x10^{-4}molMg^{+2}}{(0.3+0.5)L} =7.5x10^{-4}M[/tex]
Thereby, the reaction quotient is:
[tex]Q=(3.75x10^{-4})(7.5x10^{-4})^2=2.11x10^{-10}[/tex]
In such a way, since Q<Ksp we say that the ions tend to be formed, so no precipitate is formed.
Regards.
What would happen to the rate of a reaction with rate law rate = k [NO]2[Hz] if
the concentration of NO were doubled?
Answer:
The rate would have doubled
Explanation:
Automotive air bags inflate when sodium azide decomposes explosively to its constituent elements: 2NaN3 (s) → 2Na (s) + 3N2 (g) How many grams of sodium azide are required to produce 30.5 g of nitroge
Answer:
NaN3 = 47.2 g
Explanation:
Given:
2 NaN3 ⇒ 2 Na + 3 N2
Find:
Amount of NaN3
Computation:
N2 moles = Product of N2 / molar mass of N2
N2 moles =30.5/28
N2 moles = 1.0893
2NaN3 makes 3(N2 )
So,
NaN3 moles = (2/3) moles of N2
NaN3 moles = ( 2/3) × 1.0893
NaN3 moles = = 0.7262
NaN3 mass = 0.7262 x 65
NaN3 = 47.2 g
Answer:
NaN3 = 47.2 g
Explanation:
Given:
2 NaN3 ⇒ 2 Na + 3 N2
Find:
Amount of NaN3
Computation:
N2 moles = Product of N2 / molar mass of N2
N2 moles =30.5/28
N2 moles = 1.0893
2NaN3 makes 3(N2 )
So,
NaN3 moles = (2/3) moles of N2
NaN3 moles = ( 2/3) × 1.0893
NaN3 moles = = 0.7262
NaN3 mass = 0.7262 x 65
NaN3 = 47.2 g
Explanation:
If the rate of formation (also called rate of production) of compound C is 2M/s in the reaction A --->2C, what is the rate of consumption of A
Answer:
[tex]r_A=-1\frac{M}{s}[/tex]
Explanation:
Hello,
In this case, given the rate of production of C, we can compute the rate of consumption of A by using the rate relationships which include the stoichiometric coefficients at the denominators (-1 for A and 2 for C) as follows:
[tex]\frac{1}{-1} r_A=\frac{1}{2}r_C[/tex]
In such a way, solving the rate of consumption of A, we obtain:
[tex]r_A=-\frac{1}{2} r_C=-\frac{1}{2}*2\frac{M}{s}\\ \\r_A=-1\frac{M}{s}[/tex]
Clearly, such rate is negative which account for consumption process.
Regards.
If we represent the equilibrium as:...N2O4(g) 2 NO2(g) We can conclude that: 1. This reaction is: A. Exothermic B. Endothermic C. Neutral D. More information is needed to answer this question. 2. When the temperature is increased the equilibrium constant, K: A. Increases B. Decreases C. Remains the same D. More information is needed to answer this question. 3. When the temperature is increased the equilibrium concentration of NO2: A. Increases B. Decreases C. Remains the same D. More information is needed to answer this question.
Answer:
1. This reaction is: B. Endothermic.
2. When the temperature is increased the equilibrium constant, K: A. Increases.
3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.
Explanation:
Hello,
In this case, considering the images, we can state that the red color at high temperature is due to the presence of nitrogen dioxide (product) and the lower coloring is due to the presence of dinitrogen tetroxide (reactant) at low temperature.
With the aforementioned, we can conclude that the chemical reaction:
[tex]N_2O_4(g) \rightleftharpoons 2 NO_2(g)[/tex]
Is endothermic since high temperatures favor the formation of the product and the low temperatures favor the consumption of the the reactant. thereby:
1. This reaction is: B. Endothermic.
2. When the temperature is increased the equilibrium constant, K: A. Increases. In this particular case, since the dinitrogen tetroxide has 1 molecule and nitrogen dioxide two molecules in the chemical reaction, the entropy change should be positive, therefore, by increasing the T, the Gibbs free energy of reaction becomes more negative:
[tex]G=H-TS[/tex]
As Gibbs free energy becomes more negative, the equilibrium constant becomes bigger given their relationship:
[tex]K=exp(-\frac{\Delta G}{RT} )[/tex]
3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.
Regards.
PV = nRT. If P = 1 atm, V = 5.0 liter, R = 0.0821 L.atm/mol.K, and T = 293 K; what is the value of n?
Answer:
n = 0.207 mole
Explanation:
We have,
P = 1 atm
V = 5 liter
R = 0.0821 L.atm/mol.K
T = 293 K
We need to find the value of n. The relation is as follows :
PV = nRT
Solving for n,
[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{1\times 5}{0.0821 \times 293}\\\\n=0.207\ \text{mol}[/tex]
So, the value of n is 0.207 mol.
According to the following reaction, how many moles of ammonia will be formed upon the complete reaction of 31.2 grams of nitrogen gas with excess hydrogen gas ? nitrogen(g) + hydrogen(g) ammonia(g)
Answer:
4.46 mol of NH3
Explanation:
The equation of he reaction is given as;
2N + 3H2 --> 2NH3
From the stochiometry of the reaction, 1 mol of Nitrogen produces 2 mol of Ammonia.
Mass of Nitrogen = 31.2g
Molar mass of Nitrogen = 14g/mol
Number of moles = Mass / Molar mass = 31.2 / 14 = 2.23 mol
Since 1 mol of N = 2 mol of NH3;
2.23 mol of N2 would produce x
x = 2.23 * 2 = 4.46 mol of NH3
Arrange the following substances in the order of increasing entropy at 25°C. HF(g), NaF(s), SiF 4(g), SiH 4(g), Al(s) lowest → highest
Answer:
Al(s)<NaF(s)<HF(g)<SiH4(g)<SiF4(g)
Explanation:
Hello,
In this case, we can arrange the increasing order of entropy at 25 \°C by taking into account, at first, that since solids are more molecularly organized than gases, the first we have solid sodium fluoride and solid aluminium, but in this case, as the higher the molar mass, the higher the entropy, the molar mass of aluminium is 27 g/mol and 42 g/mol for sodium fluoride, therefore, we first have:
Al(s)<NaF(s)
Afterwards, since the molar mass of hydrogen fluoride (HF), silicon fluoride (SiF4) and silane (SiH4) are 20, 104 and 32 g/mol respctively, since silicon fluoride has the greater molar mass, it also has the higher entropy. In such a way, the overall order turns out:
Al(s)<NaF(s)<HF(g)<SiH4(g)<SiF4(g)
Best regards.
write the balanced nuclear equation for the radioactive decay of radium-226 to give radon-222, and determine the type of decay
Answer:
226Ra88→222Rn86+4He2
Explanation:
An α-particle usually consists of a helium nucleus which indicates the type of decay that was undergone in this radioactive process.
During α-decay(alpha decay), an atomic nucleus emits an alpha particle.
How many equivalent resonance structures can be drawn for the molecule of SO3 without having to violate the octet rule on the sulfur atom
Answer:
3
Explanation:
Resonance is a valence bond concept put forward by Linus Pauling to explain the fact that the observed properties of a molecule may be as a result of the fact that its actual structure lie somewhere between a given number of structural extremes called canonical structures or resonance structures.
There are three resonance structures for SO3 that obey the octet rule. All the S-O bonds in SO3 are equivalent in these resonance structures.
Seven equivalent resonance structures for the molecular of SO3 can be drawn without breaking the octet rule.
We can arrive at this answer because:
The octet rule is a rule that states that an atom must reach stability when it has eight electrons in the valence layer.This means that in bonds that cause the donation or sharing of electrons between atoms, each atom has eight electrons in the valence layer.In chemistry, resonance is a term that refers to structures created to represent the donation or sharing of electrons between the atoms of a molecule.These structures can be arranged in different ways, as long as they respect the octet rule.In an SO3 molecule, electrons are shared between atoms. This sharing can be done with seven resonance structures.
These structures are shown in the figure below.
More information:
https://brainly.com/question/8155254?referrer=searchResults
Which of the following sets of quantum numbers (n, l, ml, ms) refers to a 3d orbital? Question 5 options: 2 0 0 – g 5 4 1 – 4 2 –2 + 4 3 1 – 3 2 1 –
3 2 1 is the set of quantum numbers.
What are Quantum Numbers?The set of numbers used to describe the position and energy of the electron in an atom is called quantum numbers. There are four quantum numbers, namely, principal, azimuthal, magnetic, and spin quantum numbers.
What is the rule of quantum numbers?The rules for quantum numbers are: (n) can be any positive, nonzero integral value. (l) can be zero or any positive integer but not larger than (n-1). l = 0, 1, 2, 3, 4, …. (n-1) (ml) values follow the equation.
Learn more about quantum numbers here: https://brainly.com/question/24095340
#SPJ2
which law states that the pressure and absolue tempeture of a fixed quantity of gas are directly proportional under constant volume conditions?
Answer:
Gay lussacs law
Explanation:
