Answer:
Hence the correct option is the last option that is tends to gain electrons in chemical reactions to become anions.
Explanation:
Metals tend to donate electrons in chemical reactions to become cations.
What is Bose Einstein state of matter and their examples
Answer:
A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.
Examples - Superconductors and superfluids are the two examples of BEC.
Explanation:
What is the minimum pressure in kPa that must be applied at 25 °C to obtain pure water by reverse osmosis from water that is 0.690 M in sodium chloride and 0.08 M in zinc sulfate? Assume complete dissociation for electrolytes.
Answer:
1. Water purification method by reverse osmosis – membrane filtration
2. Method of purifying pure water by filter
3. Demineralization by ion exchange method
3. Demineralization by ion exchange method
Explanation:
calculate the total consumer surplus in the amusement park market if they a 12
Answer:
The total consumer surplus is 240.
Explanation:
If p=12 then q=20
0.5×(36−12)×20=240
here's the graph to help you see the change.
What does quantization refer to?
Answer:
Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).
Explanation:
Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
What is Quantatization in Chemistry ?In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.
Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).
Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.
Learn more about Quantum here ;
https://brainly.com/question/16746749
#SPJ2
Which of the following are examples of single replacement reactions? Select all that apply.
Answer:
Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)
Answer: it’s checkbox 2&3
The solubility of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10â2 M.
a. Write the balanced solubility equilibrium equation for LiF.
b. Determine the molar concentration of the lithium ion and the fluoride ion.
c. Write the Ksp expression for the reaction.
d. Calculate Ksp for lithium fluoride.
Answer:
a. LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
b. [Li⁺] = [F⁻] = 6.2 x 10⁻² M
c. Ksp = [Li⁺] [F⁻]
d. Ksp = 3.8 × 10⁻³
Explanation:
The solubility (S) of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10⁻² M.
a. The balanced solubility equilibrium equation for LiF is:
LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
b. We will make an ICE chart.
LiF(s) ⇄ Li⁺(aq) + F⁻(aq)
I 0 0
C +S +S
E S S
Then, [Li⁺] = [F⁻] = S = 6.2 x 10⁻² M
c. The solubility product constant, Ksp, is the equilibrium constant for a solid substance dissolving in an aqueous solution.
Ksp = [Li⁺] [F⁻]
d.
Ksp = [Li⁺] [F⁻] = (6.2 x 10⁻²)² = 3.8 × 10⁻³
The color cyan has a frequency of 5.902x10^14 What is the wavelength in nm ? Record your answer with 2
decimals.
The wavelength of the color cyan is 508 nm.
To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:
c = λ x ν
Given:
c = speed of light = 3.00 x 10⁸ m/s (is a constant)
ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹
We introduce the data to calculate the wavelength in m:
λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m
We know that 10⁻⁹m = 1 nm, so we convert λ to nm:
λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm
To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945
Give the amino acid sequence in the following tetrapeptide using both 3-letter and 1-letter abbreviations for the amino acids. (Capitalize amino acid abbreviations appropriately.) ball
Answer:
ggggggggggggg
Explanation:
gggggggggggthyjum
Which of the following substances can be used to neutralize HF?
A: HF
B: SO2
C: HCI
D: NaOH
Answer:
option (D) NaOH is right answer
A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.
What is an acid?An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".
What is base?Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".
Hence, NaOH can be used to neutralize HF.
To learn more about Neutralization reaction here
https://brainly.com/question/24367029
#SPJ2
Hydrogengasand oxygengas react to form water vapor. Suppose you have of and of in a reactor. Calculate the largest amount of that could be produced. Round your answer to the nearest .
The question is incomplete. The complete question is :
Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .
Solution :
The balanced reaction for reaction is :
[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]
11.0 13.0
11/2 13/1 (dividing by the co-efficient)
6.5 mol 13 mol (minimum is limiting reagent as it is completely consumed during the reaction)
Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]
= 11.0 mol
the ability for carbon to form long chain or rings is
Calculate the enthalpy change for the reaction of hydrogen and chlorine using the bond energies below.
"BOND." " BOND ENERGY "
H-H. 436
CL-CL. 242
H-CL. 431
Answer:
final-intial temperature= enthalpy change
What volume (in liters) of a solution contains 0.14 mol of KCl?
1.8 M KCl
Express your answer using two significant figures.
Answer:
[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]
Explanation:
We are asked to find the volume of a solution given the moles of solute and molarity.
Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]
We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.
moles of solute = 0.14 mol KCl molarity= 1.8 mol KCl/ Lliters of solution=xSubstitute these values/variables into the formula.
[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]
We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.
[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]
Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.
[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
The units of moles of potassium chloride cancel.
[tex]x= \frac{0.14 }{1.8 L}[/tex]
[tex]x=0.07777777778 \ L[/tex]
The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.
[tex]x \approx 0.078 \ L[/tex]
There are approximately 0.078 liters of solution.
How is a light bulb related to radiation?
A. Light bulbs do not have anything to do with radiation.
B. A light bulb emits radiation when its filament is burned out and can longer emit light. This makes it important to remove dead lightbulbs as soon as they wear out.
C. As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
D. The light emitted by a light bulb is a form of radiation that occurs when the filament heats up and its thermal emission gains enough energy to move into the visible spectrum.
Answer:
As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
In an ELISA, the compound 4-chloro-1-naphthol is used because:_______
a. it turns color in the presence of an enzyme that is bound to the secondary antibody
b. it helps the primary antibody bind to the protein
c. it helps the secondary antibody to bind to the protein
d. all of the choices
Answer:
a. It turns color in the presence of an enzyme that us bound to the secondary antibody.
Explanation:
The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.
A tank contains oxygen gas at 2.551 atm. What is the pressure in mmHg?
The force exerted on the container by the particles of the matter is called pressure. The tank containing oxygen gas at 2.551 atm will have a pressure of 1939 mm Hg.
What is pressure?Pressure is the property used to estimate the force experienced by the system due to the liquid or the gas held in it. The pressure of the gas can be calculated by the ideal gas and force and area.
The pressure is created due to the collision of the particles of the gases and liquids on the wall perpendicularly. It is estimated in Pascal (Pa) as the standard unit along with atm and mmHg.
It is known that 1 atm = 760 mm Hg
Given,
The pressure of oxygen gas = 2.551 atm
Using the conversion factor the pressure from atm to mm Hg is calculated as,
1 atm = 760 mm Hg
2.551 atm = (2.551 atm × 760 mm Hg) ÷ 1 atm
= 1938.76 mmHg
Therefore, 1939 mm Hg is the pressure of the oxygen gas.
Learn more about pressure here:
https://brainly.com/question/20050281
#SPJ2
2. The reaction of a triglyceride with methanol in the presence of a strong base to form
methyl esters and glycerol is called
O A. transesterification.
O B. saponification.
O C. ester formation.
O D. dehydration condensation.
Answer:
The answer it's A. transesterification
Consider the reaction below. How much heat is absorbed if 5.00 moles of nitrogen react
with excess oxygen?
2 N2 (8) + O2(g) → 2 N20 (8) AHrxn- +163.2 kJ
Explanation:
The given chemical reaction is:
[tex]2 N_2 (g) + O_2(g) -> 2 N_20 (g) delta Hrxn= +163.2 kJ[/tex]
When two moles of nitrogen reacts with oxygen, it requires 163.2kJ of energy.
When 5.00 mol of nitrogen requires how much energy?
[tex]5.00 mol x \frac{163.2 kJ }{2 mol} \\=408 kJ[/tex]
Hence, the answer is 408 kJ of heat energy is required.
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)?
K1 and K2 are related algebraically because once the values are inserted into the equilibrium equation, both equations will yield a denominator of 100.
crassify the given quantities into scalar quantity and vetor quantity
Answer:
where is the quantities?
If you add a solution of NaOH to a solution of H₂CO₃, two reactions occur, one after the other. Write the chemical equations for these two reactions. (Hint: NaOH dissociate into Na+ and OH-, and the hydroxide ion is the actual base).
We have a solution of NaOH and H₂CO₃
First, NaOH will dissociate into Na⁺ and OH⁻ ions
The Na⁺ ion will substitute one of the Hydrogen atoms on H₂CO₃ to form NaHCO₃
The H⁺ released from the substitution will bond with the OH⁻ ion to form a water molecule
If there were to be another NaOH molecule, a similar substitution will take place, substituting the second hydrogen from H₂CO₃ as well to form Na₂CO₃
Explain the general properties of aqueous solution based on the following support your answer with examples for each case
1. Electrolytes versus non-electrolyte
2. Precipitation reaction
3. Solubility
An aqueous solution, based on its name, is a water based solution, such that the solvent is water. In such solution, ionic compounds when dissolved, tend to dissociate into the constituent ions, for example, sodium chloride, NaCl forms an aqueous solution of sodium, Na⁺ and chloride, Cl⁻
1) Therefore, aqueous solutions are good electrolyte when ionic, and are therefore, good electrolytes which conduct electricity compared to solids that form non-electrolyte
2) A precipitation reaction is the insoluble product formed by the combination of cations and anions to form ionic solids that are insoluble
3) Aqueous solutions are made with substance that are soluble in water
Learn more about aqueous solution here;
https://brainly.com/question/19587902
How many protons does Tin have?
A. 50
B. 68
C. 118
Hello There!
Tin has 50 protons.Hope that helps you!
~Just a felicitous girlie
#HaveASplendidDay
[tex]SilentNature[/tex]
A sentence using the word Compound
Answer:
The air smelled like a compound of diesel and gasoline fumes.
Gaseous methane (CH4) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO2) and gaseous water . Suppose 2.73 g of methane is mixed with 6.7 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
3.8g of H2O are produced
Explanation:
The balanced reaction of the problem is:
CH4 + 2O2 → CO2 + 2H2O
Where 1 mole of CH4 reacts with 2 moles of O2
To solve this question we need to find, as first, the moles of each reactant in order to find limiting reactant. With limiting reactant we can find the moles of H2O produced and its mass as follows:
Moles CH4 - 16.04g/mol-
2.73g * (1mol/16.04g) = 0.170 moles CH4
Moles O2 -32g/mol-
6.7g (1mol/32g) = 0.209 moles O2
For a complete reaction of 0.170 moles of CH4 are needed:
0.170 moles CH4 * (2 mol O2 / 1mol CH4) = 0.340 moles O2
As there are just 0.209 moles of O2, oxygen is limiting reactant
The moles of water produced are:
0.209 moles O2 * (2mol H2O / 2mol O2) = 0.209 moles H2O
Mass water -Molar mass: 18.01g/mol-
0.209 moles H2O * (18.01g/mol) = 3.8g of H2O are produced
As discussed in class, the Fischer esterification reactants and products are at equilibrium. How was the equilibrium of the reaction that you performed shifted towards the products
Answer:
See explanation
Explanation:
The particular reactants in the Fischer esterification reaction were not stated.
Generally, a Fischer esterification is a reaction that proceeds as follows;
RCOOH + R'OH ⇄RCOOR' + H2O
This reaction occurs in the presence of an acid catalyst.
We can shift the equilibrium of this reaction towards the products side in two ways;
I) use of a large excess of either of the reactants
ii) removal of one of the products as it is formed.
Any of these methods shifts the equilibrium of the Fischer esterification reaction towards the products side.
The average temperature at the South Pole In January is - 35.4 °C.
Convert this temperature to degrees Fahrenheit. Round your answer to 3 significant digits.
°F
Answer:
-31.72°F
Explanation:
(-35.4°C × 9/5) + 32 = -31.72°F
The average temperature at the South Pole In January is - 35.4 °C. This temperature in Fahrenheit is -31.72 °F
To convert Celsius to Fahrenheit, you can use the formula:
°F = (°C × 9/5) + 32
Let's calculate the temperature at the South Pole in degrees Fahrenheit:
°F = (-35.4 × 9/5) + 32
°F = (-63.72) + 32
°F = -31.72
Rounding to three significant digits, the temperature at the South Pole in degrees Fahrenheit is approximately -31.7 °F. The negative sign indicates that the temperature is below the freezing point in both Celsius and Fahrenheit scales. The South Pole experiences freezing temperatures, as it is located near the Earth's southernmost point and experiences long periods of darkness during January.
Hence, the temperature in Fahrenheit is -31.7 °F.
Learn more about temperature here:
https://brainly.com/question/7510619
#SPJ 4
g Identify the process in which the entropy increases. Group of answer choices a decrease in the number of moles of a gas during a chemical reaction the phase transition from a gas to a liquid the phase transition from a solid to a gas freezing water
Answer:
phase transition from a solid to a gas
Explanation:
Entropy refers to the degree of disorderliness in a system. The more disorderly a system is, the greater the entropy of the system.
Decrease in the number of moles of a gas decreases the entropy of the system. Similarly, the entropy of solids is less than that of liquids. The entropy of liquids is less than that of gases.
Therefore, a change of phase from solid to gas represents an increase in entropy of the system.
1. Consider the following thermochemical reaction for kerosene:
2 C12H26(l) + 37 O2(g) 24 CO2(g) + 26 H2O(l) + 15,026 kJ
(a) When 21.3 g of CO2 are made, how much heat is released?
(b) If 500.00 kJ of heat are released by the reaction, how grams of C12H26 must have been consumed ?
(c) If this reaction were being used to generate heat, how many grams of C12H26 would have to be reacted to generate
enough heat to raise the temperature of 750g of liquid water from 10oC to 90oC?
2. Consider the reaction: NaNO3(s) + H2SO4(l) → NaHSO4(s) + HNO3(g) ΔH° = 21.2 kJ
How much heat must absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s)?
3. What is the enthalpy change when 49.4 mL of 0.430 M sulfuric acid reacts with 23.3 mL of 0.309 M potassium
hydroxide?
3.
H2SO4(aq) + 2KOH(aq) → K2SO4(aq) + 2H2O(l) ΔH° = –111.6 kJ/mol
do you have the specific heat for part 2?
What did Millikan discover
Answer:
Robert Millikan was a physicist who discovered the elementary charge of an electron using the oil-drop experiment
Answer:
the mass of an electron using the Oil-Drop experiment.
Explanation:
