& What is meant by expansion effect of heating?​

Answer:

The correct option is (a) "potential difference".

Explanation:

EMF is an Electromotive force. It is the energy per unit electric charge that is imparted by an energy source, such as an electric generator or a battery. One of the terminals of device is positive and other is negative. It is also defined as  terminal potential difference when no current flows.

It is actually a potential difference across the terminals.

Answer:

potential difference

Explanation:

Explanation:

Given that,

The voltages across them are 40,50 and 60 volts respectively, and the charge on each condenser is 6×10⁻⁸ C.

(a) Capacitance of capacitor 1,

[tex]C_1=\dfrac{Q}{V_1}\\\\C_1=\dfrac{6\times 10^{-8}}{40}\\\\C_1=1.5\times 10^{-9}\ F\\\\C_1=1.5\ nF[/tex]

Capacitance of capacitor 2,

[tex]C_2=\dfrac{Q}{V_2}\\\\C_2=\dfrac{6\times 10^{-8}}{50}\\\\C_2=1.2\times 10^{-9}\ F\\\\C_2=1.2\ nF[/tex]

Capacitance of capacitor 3,

[tex]C_3=\dfrac{Q}{V_3}\\\\C_3=\dfrac{6\times 10^{-8}}{60}\\\\C_3=1\times 10^{-9}\ F\\\\C_3=1\ nF[/tex]

(b) The equivalent capacitance in series combination is :

[tex]\dfrac{1}{C}=\dfrac{1}{C_1}+\dfrac{1}{C_2}+\dfrac{1}{C_3}\\\\\dfrac{1}{C}=\dfrac{1}{1.5}+\dfrac{1}{1.2}+\dfrac{1}{1}\\\\C=0.4\ nF[/tex]

Hence, this is the required solution.

Answer:

It is proved.

Explanation:

PV = n R T

where,  P is the pressure, V is the volume, n is the number of moles, R is the gas constant, T is  the absolute temperature.

Unit of pressure is Pascal= Newton/square meter = [tex][ML^{-1}T^{-2}][/tex]

Unit of volume is cubic meter = [tex][L^{3}][/tex]

So, the unit of P V

[tex][ML^{-1}T^{-2}] \times [L^{3}]\\\\[ML^2T^{-2}}[/tex]

[tex][ML^{2}T^{-2}][/tex]

It is same as the unit of energy.

hence proved.  

Answer:

Yes

Explanation:

Many scientists believe that the universe is expanding at an increasing rate. Scientists cannot explain how the universe is expanding at an increasing rate because by law of conservation of energy, there is only a finite amount of energy. Thus, scientists have called this new source of energy dark matter and it is all around the universe helping shape and form the universe.

Answer:

t = 3.44 s

Explanation:

We are given;

Fired from rest, and so; u = 0 m/s

Final speed; v = 170 m/s

Height above flat ground; y_o = 58 m

Height at starting point; y = 0 m

Thus, from Newton's equation of motion, we have;

y - y_o = ut - ½gt²

(since it's motion is against gravity)

Plugging in the relevant values, we have;

0 - 58 = 0 - (½ × 9.8 × t²)

-58 = -4.9t²

t² = 58/4.9

t = √(58/4.9)

t = 3.44 s

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Explanation:

Hydraulic Pressure-Control, On-Off Deluge Valve

FP-400Y-5DC

The BERMAD model 400Y-5DC is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-5DC is activated by a hydraulically operated relay valve, through which opening and closing of the valve can be controlled either with a remote hydraulic command or with a wet pilot line with closed fusible plugs. An integral pressure reducing pilot valve ensures a precise, stable, pre-set downstream water pressure. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-5DC is ideal for systems that combine a remote wet pilot line with a high pressure water supply.

Answer:

S = 1/2 g t^2      where t is the time to fall 1.2 m

t = (2 S / g)^1/2 = (2 * 1.2 / 9.8) = .495 s

Sy = Vy T = 3 m/sec  * .495  sec = 1.48 m     distance from edge of table

(Rotational speed has no effect since table is smooth)

Answer:

Explanation:

If you multiply the number of watts by the number of seconds, you'll end up with joules. 

Since fundamental units are elementary in nature and cannot be reduced further, so it can not be reduced further, so it cannot be expressed in other units

Answer:

im pretty sure it should be 50.0

Mendeleev wrote down atomic mass

Answer:

A. Buoyancy.

hope it helps

Answer:

C

Explanation:

Pigments reflect some wavelength of visible light and absorb

Answer:

Explanation:

When the spring is compressed, it is compressed to its amplitude (whereas equilibrium is the spring's natural length with no mass attached to it and displacement is the spring's reaction to a mass hung on the end of it without any "extra" pushing or pulling on the mass). It is at the amplitude where the spring experineces max potential energy, which is choice 2, E = mph

Answer:

its c

Explanation:

...

Answer:

I = 0.2 A

Explanation:

Lamp is rated at 300 mA

I_lamp = 300 mA = 0.3 A

Voltage is; V = 3V

Thus; Resistance is given by;

R = V/I

R = 3/0.3

R = 10 ohms

Now, since the ammeter of 5 ohms is connected in series with the lamp. Thus equivalent resistance;

R_eq = 10 + 5

R_eq = 15 ohms

Ammeter current will be;

I = V/R_eq

I = 3/15

I = 0.2 A

Answer:

Explanation:

First I converted the km/h to m/s, which is the more common unit for velocity. In m/s, 105 km/h is 29.2. Thus, to find the x component of the vector:

29.2cos25 = 26 m/s

If you want it in km/h:

105cos25 = 95 km/h

Answer:

The big rip theory

Explanation:

      I believe what you are referring to is the big rip theory, in which the universe expands faster than the speed of light Kurzgesagt refers to it as a "horizon" but in reality it's a little more complicated than that. Eventually the expansion of the universe will accelerate far beyond the speed of light creating space between molecules until eventually all matter is fleeting and the entire universe is an endlessly vast cosmic void with not but the occasion molecule left from a time when things weren't so lonely.

Answer:

the third one T-W

Explanation:

the direction of the Tension and weight are opposite

The plane has a centripetal acceleration a of

a = v ²/r

where v is the plane's tangential speed and r is the radius of the circle. By Newton's second law,

F = mv ²/r

Solve for the mass m :

m = Fr/v ² = (3000 N) (18.3 m) / (55.0 m/s)² ≈ 18.1 kg

Answer:

[tex]H_{max}=3.4m[/tex]

Explanation:

From the question we are told that:

Mass 1 [tex]m_1=5kg[/tex]

Mass  [tex]m_2=2kg[/tex]

Distance above floor [tex]d=2.5m[/tex]

Generally the equation for Conservation of energy is mathematically given by

[tex]0.5m_1v^2+0.5m_2v^2=2mg[/tex]

[tex]0.5m_1v^2+0.5m_2v^2=2g(m_1-m_2)[/tex]

[tex]v^2(0.5*m_1+0.5*m_2)=2*g(m_1-m_2)[/tex]

[tex]v^2(0.5*5+0.5*2) = 2 * 9.8 * (5 - 2)[/tex]

[tex]v^2=\frac{58.8}{3.5}[/tex]

[tex]v=4.1m/s[/tex]

Generally the equation for The maximum height of lighter block  is mathematically given by

[tex]H_{max}=d+\frac{v^2}{2g}[/tex]

[tex]H_{max}=2.5+\frac{16.2}{2*9.81}[/tex]

[tex]H_{max}=3.4m[/tex]

Answer:

3420.39 N

Explanation:

Applying,

Fd = 1/2(mv²-mu²)................. Equation 1

Where F = force on the bumber, d = distance, m = mass of the car, v = final velocity, u = initial velocity.

make F the subject of the equation

F = (mv²-mu²)/2d............... Equation 2

From the question,

Given: m = 890 kg, v = 0 m/s (to rest), u = 1.4 m/s, d = 0.255 m

Substitute these values into equation 2

F = [(890×0²)-(890×1.4²)]/(2×0.255)

F = -1744.4/0.51

F = -3420.39 N

The negative sign denotes that the force in opposite direction to the motion of the car.

Answer:

what if I do and b then someone else c I don't have enough time pls

Answer:

hey hi mate

ur answer is move of above

hope you like it

plz mark it as brainliest

Answer:

The answer is C.

Explanation:

Answer:

Explanation:

The equation for this is the one for the Law of Momentum Conservation which says that the momentum before the collision of the balls has to be the same after the collision because momentum cannot be created or destroyed. For us in particular:

[tex][(m_1v_1+m_2v_2)]_b=[(m_1+m_2)v_{both}]_a[/tex] and filling in:

[(4.0)(6.0) + (2.0)(0)] = [(4.0 + 2.0)v] and

24 + 0 = 6.0v and

24 = 6.0v so

v = 4.0 m/s to the right

Answer:

-standard 1 kg : Kilogram (kg), basic unit of mass in the metric system.

-standard 1 meter: The standard metre is the length of the path travelled by light in vaccum during a time interval of 1/299792458 of a second.

- standard 1 second : The second (abbreviation, s or sec) is the Standard International ( SI ) unit of time.

Explanation:

HOPE IT HELPS YOU !!

Answer:

In coin card experiment smooth card is used so that the card can slide easily from glass

Answer:

acceleration = - 150 m/s^2

distance = 9 miles.

Explanation:

initial speed, u = 60 mph

time, t = 12minutes = 0.2 hour

final speed, v = 30 mph

Let the acceleration is a and the distance is s.

By the first equation of motion

v = u + at

30 = 60 + a x 0.2

a = - 150 m/s^2

Let the distance is s.

Use third equation of motion is

[tex]v^2 = u^2 + 2 a s \\\\30^2 = 60^2 + 2 \times 150\times s\\\\s = 9 miles[/tex]

Answer:

A         Em

     1          ½ K

     2         ½ k 4 = 2k

     3         ½ k 9 = 4.5 k

     4         ½ k 16 = 8k

Explanation:

The total mechanical energy of a simple harmonic movement is constant in time, let's look for the energy at one end of the movement, where the velocity of the body is zero.

        Em = U = ½ k x²

at the end x = A

        Em = ½ k A²

Let's build a table for the energy and as a function of the amplitudes of the movement

     A         Em

     1          ½ K

     2         ½ k 4 = 2k

     3         ½ k 9 = 4.5 k

     4         ½ k 16 = 8k

as a function of the lowest energy

      1            Eo = ½ k

      2           4Eo

      3           9 Eo

      4          16Eo