An 8 kg ball travelling at 4 m/s collides head on with a 3 kg ball travelling at 14 m/s. The balls bounce off each other and travel back the way they came. The 8 kg ball travels away at 2 m/s. calcukate: the velocity of the 3 kg ball after the collision.​

Answer:

The best statement that explains the student's observation is: "The water is not a smooth surface after the rock is dropped in the pond." When the rock is dropped in the pond, it creates ripples and waves that disturb the smooth surface of the water. As a result, the reflection becomes less clear because the disturbed surface scatters the light and creates a distorted image. This is a common phenomenon observed when a disturbance is created on the surface of water, like when you throw a stone or object into it.

The maximum displacement of m  is 199.14, and the time for maximum compression 1.56 seconds.

Given:

Weight, W = 38.6 lb

K(combined stiffness) = 6.4 lb/in

To find:

Maximum displacement of m and the time for maximum compression

Solution: The displacement and velocity of the weight at any time t can be written as below:

x = Acos (ωt + δ)z = Asin(ωt + δ)

Here, A = amplitude

ω = angular frequency = 2π

f = 2π/T

f = frequency = 1/TP = time period

z = vertical displacement of weight from its rest position

x = horizontal displacement of weight from its rest position

For the maximum displacement, the system will be in a state of equilibrium. i.e. ΣF = 0

Let's assume that the weight moves downwards by distance m, the force exerted by each spring will be kx, and the weight exerts a force W = mg on the springs downwards.

Here, m = 38.6 lbs, g = 32.2 ft/s2 and k = K/m = 6.4/38.6 = 0.1657 lb/in

ΣF = -kx - kx - kx - kx - kx - kx + mg = 0-6.4m = -38.6 * 32.2m = 199.14 in (Maximum Displacement of M)The maximum compression will occur when the weight is at the lowest point, i.e. z = -A

Therefore, the time for maximum compression, tmax can be calculated as below.

z = Asin(ωt + δ)At the point of maximum compression, t = tmax

z = -A = -199.14 in (as calculated above)

Therefore,-199.14 = Asin(ωtmax + δ)

Here, A = kx = 6.4×199.14/32.2 = 39.45 inω = 2π/T = 2πf = 2π/4.72 = 1.33 rad/s (where T = time period and f = frequency)

Therefore,-199.14 = 39.45sin(1.33tmax + δ)sin(1.33tmax + δ) = -5.05tmax = 1.56 s

Thus, the maximum displacement of m is 199.14 inches and the time for maximum compression is 1.56 seconds.

To know more about Displacement please visit :

https://brainly.com/question/14422259

#SPJ11

A one solar mass star uses Hydrogen as nuclear fuel over the course of its entire evolution.

Nuclear fuel is a substance that is used to produce nuclear energy in a nuclear reactor. Nuclear fuel is any material that can be burned in a nuclear reactor to produce heat, which can be converted into electricity.

Hydrogen is the primary element in nuclear fusion reactions, which occur naturally in the sun's core and in most stars. Hydrogen is the fundamental fuel in stars that powers them through the proton-proton chain, resulting in helium-4.

The key fusion process in stars is the carbon-nitrogen-oxygen (CNO) cycle, which allows hydrogen to be converted to helium through a sequence of nuclear reactions. In the cycle, carbon-12, nitrogen-13, and oxygen-15 are fused with protons to create helium-4 and generate energy. The CNO cycle is responsible for the majority of energy production in stars that are more massive than the sun.

Hence, the answer is Hydrogen.

To know more about Nuclear Fusion, refer here:

https://brainly.com/question/12701636#

#SPJ11

The structure described by the scientist, which is an oily sphere with an inner fluid, is most likely a lipid vesicle.

Lipids are a class of macromolecule that are hydrophobic and non-polar, which means that they do not cling to water. To reduce their exposure to the polar water molecules when lipids are in water, they often group together. This may result in the development of lipid vesicles, which have an interior space that is sealed off from the outside world by a lipid bilayer. Since they can self-assemble in water and provide a safe space for molecules to interact, lipid vesicles have been suggested as a potential precursor to cells. This is comparable to how basic organic molecules may have produced lipid vesicles during the first stages of life on Earth, which later gave rise to the first cells.

Learn more about  scientist here:

https://brainly.com/question/17450573

#SPJ4

The applied force for the engine will be 24,450 N.

The applied force produced by the engine for a car weighing 12,500 n starting from rest and accelerating to 83.0 km/h in 5.00 s with a friction force of 1350 n is:

Applied force = (Mass x Acceleration) - Friction force

Applied force = (12,500 N x (83.0 km/h / 5.00 s)) - 1350 N

Applied force = 25,800 - 1350 N

Applied force = 24,450 N

To learn more about force, click here:

https://brainly.com/question/12970081

#SPJ11

Hans Christian Oersted established the connection between electricity and magnetism in 1820. The magnetic field produced by the current revolves around the wire in a circle.

Oersted demonstrated how a magnetic field may be produced by moving electrons by establishing a compass through a wire carrying an electric current.

Scientists believed that electricity and magnetism had no connection until the discovery of electromagnetism. Hans Christian Oersted, a scientist from Denmark, revolutionised all of that. He found that an electric current in a wire may cause a magnetic field, as evidenced by the fact that the current can cause a magnetised compass needle to deflect.

The electrons in the wire are pushed when a coil of wire is moved around a magnet or vice versa, producing an electrical current. In essence, kinetic energy—the energy of motion—is transformed into electrical energy via electricity generators.

Learn more about Electricity here:

https://brainly.com/question/12791045

#SPJ4

The given statement "If two identical wires carrying a certain current in the same direction are placed parallel to each other, then they will experience a force of repulsion" is true. This can be explained through Lenz's law.

Two parallel wires which are carrying the same magnitude of current in the same direction experience a force of repulsion due to the electric currents in each of the wire which are creating a magnetic field in the same direction. This force of repulsion is known as the Lenz's Law.

When two identical wires are carrying a certain magnitude of electric current in the same direction and these are placed in parallel to each other, then they will experience a force of repulsion. This is due to the principle of the electromagnetic force and Lenz's law. When the two current-carrying wires are kept near each other, then they exert force on each other, and that force is called as the force of repulsion or the force of attraction depending on the direction of the current flowing through the wire. The direction of the force is given by the Fleming's left-hand rule, which is the most common way to determine the direction of the force in such cases.

Learn more about Electric current here:

https://brainly.com/question/2264542

#SPJ11

(a) The current in the 8.00 Ω resistor connected to a battery that has an internal resistance of 0.15 Ω and a terminal voltage of 9.00 V is 1.0 A.

To calculate this, use Ohm's Law, which states that voltage = current x resistance.

Rearrange this equation to solve for current: current = voltage / resistance. Plug in the values for voltage and resistance to get:

current = 9.00 V / 8.00 Ω + 0.15 Ω = 1.0 A.

(b) The EMF (electromotive force) of the battery is 9.00 V. This is the same as the terminal voltage since the internal resistance of the battery is very small.

Learn more about resistance at : https://brainly.com/question/24119414

#SPJ11

The initial separation d between the mass and the spring is 0.14m.

A m = 2.88kg mass starts from rest and slides a distance d down a frictionless θ = 34.7° incline. While sliding, it comes into contact with an unstressed spring of negligible mass. The mass slides an additional 0.185m as it is brought momentarily to rest by compression of the spring (k = 409N/m).

The initial separation d between the mass and the spring can be calculated using the equation:

d = (2*m*g*sin(θ)) / k

Substituting in the given values, we get:

d = (2*2.88kg*9.8m/s2*sin(34.7°)) / 409N/m

d = 0.14m

Therefore, the initial separation d between the mass and the spring is 0.14m.

To know more about initial separation, refer here:

https://brainly.com/question/12970890#

#SPJ11

The statement is True, A charge is passing through a static magnetic field. the velocity of the charge makes a 90o angle with the field. the force exerted by the magnetic field does work on the charge.

The magnetic force exerted on a moving charge with a velocity in the presence of a magnetic field is given by F = qvBsinθ

Magnetic force is a fundamental force that arises due to the motion of electric charges. It is the force that acts between two magnetic poles or between a magnetic pole and a moving charged particle. Magnetic force is a vector quantity and is described in terms of its direction, magnitude, and point of application.

The force between two magnetic poles is governed by the inverse square law, which means that the force decreases as the distance between the poles increases. The direction of the magnetic force is perpendicular to the direction of motion of the charged particle and to the direction of the magnetic field in which it moves. The magnitude of the magnetic force is proportional to the charge of the particle, its velocity, and the strength of the magnetic field.

To learn more about Magnetic force visit here:

brainly.com/question/3160109

#SPJ4

The room temperature is approximately 0.95°C.

Rt = Ro[1 + A(Tt - To) + B(Tt - To)2]

75,000 = Ro[1 + A(100 - To) + B(100 - To)2]

64,992 = Ro[1 + A(25 - To) + B(25 - To)2]

Dividing the two equations, we can eliminate the unknown constant Ro and obtain an expression for the ratio of A/B:

75,000 / 64,992 = [1 + A(100 - To) + B(100 - To)2] / [1 + A(25 - To) + B(25 - To)2]

Simplifying and rearranging, we get:

A/B = [1 + (100 - To)(64,992/75,000) - (25 - To)] / [(100 - To)2 - (25 - To)2(64,992/75,000)]

Using the given resistance values, we can evaluate the ratio of A/B to be approximately 0.00386.

63,000 = Ro[1 + 0.00386(0 - To) + B(0 - To)2]

Simplifying and solving for To, we get:

To ≈ 0.95°C

Resistance is a property of materials that opposes the flow of electrical current. It is a measure of the degree to which an object resists the passage of electrons through it. Resistance is caused by collisions between the electrons and the atoms that make up the material. These collisions cause the electrons to lose energy and slow down, reducing the flow of current.

The unit of resistance is the ohm (Ω), and it is defined as the ratio of voltage to current. Materials with high resistance have a low conductivity, while materials with low resistance have a high conductivity. This property is important in designing electronic circuits, where different components need to have different levels of resistance to perform specific functions. Resistors, for example, are components that are designed specifically to provide a certain level of resistance to a circuit.

To learn more about Resistance visit here:

brainly.com/question/30799966

#SPJ4

3.) the total momentum change per unit of time, and the total momentum change are both important in determining the amount of damage an object sustains in a collision.

The amount of damage an object receives in a collision depends on both the overall momentum change and the momentum change per unit of time. The mass and velocity of the objects colliding determine the total momentum change, which is a measure of the force of impact. The impulse, also known as the change in momentum per unit of time, is equally significant. This gauges how long an impact lasts and how the force is applied throughout that time. Impacts that last longer and exert less force can cause less harm than impacts that last less time and exert more force. The specific factors that contribute to damage will depend on the details of the collision, such as the speed, mass, and shape of the objects involved.

learn more about momentum change here:

https://brainly.com/question/30157362

#SPJ4

(a) Free-body diagram of block is as given below. (b) Acceleration of the block is 2.529 m/s². (c) Speed of the block when it reaches the bottom of the incline is 3.18 m/s.

Frictionless surface is an invented concept of surface that is based on imagination and creative ideas of scientists where assumed friction of surface is zero.

(a) Free-body diagram of block is:

            /|

           / |

          /  | m

         / θ |

        /    |

       /_____|

        f ||

          ||

          ||

          ||

          \/

where m is mass of the block, θ is angle of inclination, f is force of friction (which is zero in this case), and g is acceleration due to gravity acting vertically downwards.

(b) The force acting along incline is component of the weight of block parallel to the incline, given by mg sin θ, where m is the mass of the block and g is acceleration due to gravity. Since there is no friction, this force is equal to net force acting on block, which is ma, where a is acceleration of block along the incline. Therefore,

mg sin θ = ma

a = g sin θ

a = 9.81 m/s² * sin 15.00 = 2.529 m/s²

Therefore, the acceleration of the block is 2.529 m/s².

(c) v² = u² + 2as

where u is the initial velocity (which is zero), s is the displacement (which is 2.00 m along the incline), and a is the acceleration (2.529 m/s²). Solving for v, we get:

v = √(2as) = √(2 * 2.00 m * 2.529 m/s²) = 3.18 m/s

Hence, speed of block when it reaches bottom of incline is 3.18 m/s.

To know more about frictionless surface, refer

https://brainly.com/question/25825478

#SPJ1

The value of g, the acceleration due to gravity, is approximately 5 m/s2 or 10 n/kg.

To calculate g, we use the formula:

g = F/m

where g is the acceleration due to gravity, F is the force of gravity or weight, and m is the mass of the object.

Given that the mass of the object is 200 kg and the weight is 1000 N, we can plug in the values and solve for g:

g = 1000 N / 200 kg = 5 m/s2

Therefore, the value of g is approximately 5 m/s2 or 10 n/kg.

For more similar questions on acceleration:

brainly.com/question/25876659

#SPJ11

The best example that shows the potential energy is a body at rest from some height from the ground, thus the correct answer is option b.

Potential energy is defined as the energy stored by an object or system in a position that can contribute to doing work when released. It is the stored energy of an object or system.

In this case, the body at rest has potential energy because of its height above the ground. As it falls, the potential energy is converted to kinetic energy.

Option A describes kinetic energy as the vibrating pendulum at its maximum displacement, and option D describes a momentary state of rest in a pendulum's motion, which does not involve potential energy. Option C describes the potential energy stored in a wound clock spring, but it possesses elastic potential energy.

Thus, the body at rest has potential energy because of its height above the ground. Thus, option b is correct.

Learn more about Potential energy here:

https://brainly.com/question/14427111

#SPJ11

i) The velocity of the particle at 17 sec is 17m/s.

ii) The total distance travelled is 190 m.

iii) The total displacement is -10m.

Distance is the length of any path connecting any two places. As measured along the shortest path between any two points, displacement is the direct distance between them.

The direction is ignored when calculating distance. The direction is accounted for in the displacement calculation.

Since it solely depends on magnitude and not direction, distance is a scalar number. Since displacement varies on both magnitude and direction, it is a vector quantity.

Distance provides specific directions that must be taken when moving from one location to another. Displacement only provides a partial description of the route because it pertains to the quickest way.

Velocity of particle = Slope of the object =Δ [tex]\frac{y}{x}[/tex]

Velocity = [tex]\frac{95-10}{20-15}[/tex] = 17m/s

To know more about Displacement, visit:

https://brainly.com/question/11934397

#SPJ1

Answer: The position from which three-fourths of the illuminated side of the moon will be visible from Earth is an option (B) - Gibbous.

Explanation: The Moon appears gibbous when more than half but not all of its illuminated side is visible from Earth.

The Moon is a celestial body that orbits Earth as Earth's only permanent natural satellite. The Moon is one of the brightest and largest objects in the night sky, with a diameter of 3,475 km.

The Moon appears to change shape as it orbits Earth, going through several phases throughout the lunar month. The illuminated side of the moon is the portion of the moon that is lit up by the sun.

The Moon is not actually glowing, but rather it reflects sunlight. We cannot see the Moon when it is not illuminated.

The Moon's phases depend on its position relative to the Sun and Earth, causing the illuminated side of the Moon to face Earth from different angles.

Thus, the position from which three-fourths of the illuminated side of the moon will be visible from Earth is an option (B) - Gibbous.

Learn more about illumination here:

https://brainly.com/question/28914020

#SPJ11

While completing the pedulum experiment, you should measure the length of the pendulum to the middle of the pendulum bob to caculate the required values.

A ruler, meter stick, or measuring tape are necessary in order to determine the length of a pendulum. Start the measurement at the point where the string pivots from its attachment at the string's upper end. As you reach the item dangling from the string, the pendulum bob, measure all the way down to its center.

The smallest time intervals are measured using a pendulum clock. A little stone or metallic ball suspended from a stiff stand by a thread is the basic component of a pendulum. Bob is the name of the metallic ball.

Learn more about pedulum at:

https://brainly.com/question/30823177

#SPJ1

Answer:

The speed of the car will increase.

Explanation:

From idea of momentum, force is directly proportional to velocity

[tex]{ \bf{f \: \alpha \: v}} \\ { \rm{f = kv}}[/tex]

Initially, f = 25N and v = 3 m/s

[tex]{ \rm{25 = k \times 3}} \\ \\ { \rm{k = \frac{25}{3} }}[/tex]

Lastly, f = 35

[tex]{ \rm{f = \frac{25}{3}v }} \\ \\ { \rm{35 = \frac{25}{3} \times v}} \\ \\ { \rm{v = \frac{3 \times 35}{25} }} \\ \\ { \rm{v = 4.2} }[/tex]

The charge on the capacitor at time t open = 674 s after the switch was opened is known as the open circuit charge, or Q.

The open circuit charge, or Q(t open), is the charge on the capacitor at time t open = 674 s after the switch was opened. Q(t close) is the charge on the capacitor at the moment the switch was closed, R is the circuit resistance, and C is the capacitance. This charge can be calculated using the equation,

Q(t open) = Q(t close)e^(-RC t open)

Q(t open) = Q(t close)e^(-RC674 s),

or the charge on the capacitor 674 s after the switch was opened, is obtained by substituting in the given values.

Learn more about capacitor at:

brainly.com/question/29100869

#SPJ4

Functions of phosphorus: Bone formation, ATP production, DNA and RNA synthesis, cell membrane structure.

Order of nondairy foods by calcium content: 1) 1 cup calcium-fortified orange juice, 2) 1 cup Total Raisin Bran cereal, 3) 3 oz salmon with bones.

Highest source of phosphorus: Salmon with bones.

Organs that participate in vitamin D synthesis: Skin (when exposed to sunlight), liver, and kidneys.

What is bone formation?

Bone formation is the process by which bones grow and develop, including the deposition of mineralized bone tissue by osteoblasts and the resorption of bone tissue by osteoclasts, resulting in changes to the shape and structure of bones.

What is RNA?

RNA (Ribonucleic acid) is a molecule that plays a vital role in various biological processes. It is a type of nucleic acid that is composed of a chain of nucleotides, which are the building blocks of the molecule.

RNA is similar to DNA (deoxyribonucleic acid) in terms of its structure, but it has some key differences. RNA is usually single-stranded, while DNA is double-stranded. RNA uses the sugar ribose, while DNA uses deoxyribose. RNA also contains the nitrogenous base uracil, while DNA contains thymine.

To know more about RNA, visit:

https://brainly.com/question/20914096

#SPJ1

A bar magnet falls under the influence of gravity along the axis of a long copper tube. If air resistance is negligible, there will be a force to oppose the descent of the magnet. The magnet will reach a terminal velocity. Here's why:

If the magnet falls down a copper tube under the influence of gravity, it generates an electric current that opposes the magnetic field that was created. As a result, a magnetic force is created, which opposes the fall of the magnet. As a result, there is a force opposing the descent of the magnet.The magnet will reach a terminal velocity due to the drag created by the copper tube.

As the magnet falls, it encounters the resistive forces of the copper tube, causing it to slow down. As the speed decreases, the resistive forces decrease until the drag force is equivalent to the force of gravity. The magnet then reaches a steady state called the terminal velocity. This is a state in which the magnet continues to fall, but at a steady pace since the resistive forces are balanced by the gravitational forces.

Learn more about magnetic force: https://brainly.com/question/29252577

#SPJ11

Answer:

The mass remains the same since stoichiometrically one mole reacts and one mole is formed

Explanation:

Calcium chloride is reacting with Sodium sulphate to form a white precipitate of calcium sulphate.

[tex]{ \sf{CaCl _{2} + Na_{2} SO_{4} → CaSO _{4} + 2NaCl}}[/tex]

From the equation, 1 mole of calcium chloride forms 1 mole of calcium sulphate.

R.F.M of CaCl2 = 40 + (35.5×2) = 111

R.F.M of CaSO4 = 40 + 32 + (16×4) = 136

R.F.M of Na2SO4 = (23×2) + 32 + (16×4) = 142

R.F.M of 2NaCl = 2[23 + 35.5] = 117

[tex]{ \sf{(r.f.m \: of \: rectants) = (r.f.m \: of \: products)}} \\{ \sf{ (mass \: of \: rectants) = (mass \: of \: products)}} \\ \\ { \sf{(111 + 142) = (136 + 117)}} \\ { \sf{300.23 = x}} \\ \\ { \sf{x = \frac{300.32}{(111 + 142)} \times (136 + 117) }} \\ \\ { \sf{x = \frac{300.32}{253} \times 253 }} \\ \\ { \sf{x = 300.32}}[/tex]

Answer:

The mass remains the same

Explanation:

The appropriate visual analogies that correspond to the given scenarios are as follows:

A) The car traveling in a circle and the rain falling from the sky - this analogy corresponds to the Earth moving around the Sun and interacting with light from a distant star.

B) The car traveling in a straight line and the rain falling from the sky - this analogy corresponds to a person on the moving Earth observing the light from a distant star.

C) The car is stationary and the rain falls from the sky - this analogy corresponds to a person on a motionless Earth observing the light from a distant star.

As we know that the direction of the earth's motion around the sun continually changes during the year, and the apparent position of a star in the sky moves in a small loop, known as the aberration of starlight. Hence, the visual analogies that correspond to the given scenarios are as follows:'=

a) The Earth moving around the Sun and interacting with light from a distant star is analogous to the first picture, where the car is moving and it is raining. This visual analogy explains that when the Earth moves around the Sun and interacts with light from a distant star, it results in a small loop of light in the sky.

b) A person on the moving Earth observing the light from a distant star is analogous to the second picture, where a person is sitting inside the moving car and looking at the rain. This visual analogy explains that when a person is on the moving Earth and observes the light from a distant star, it creates an illusion in the sky.

c) A person on a motionless Earth observing the light from a distant star is analogous to the third picture, where a person is standing outside the car and looking at the rain. This visual analogy explains that when a person is on a motionless Earth and observes the light from a distant star, it appears as if the star is moving in a small loop in the sky.

Therefore, the appropriate visual analogies that correspond to the given scenarios are as follows: Image 1: The Earth moving around the Sun and interacting with light from a distant star image 2: A person on the moving Earth observing the light from a distant star image 3: A person on a motionless Earth observing the light from a distant star.

To learn more about stars follow

https://brainly.com/question/15854882

#SPJ11

The power, in terms of p0, dissipated by the given circuit is equal to 0.06p0².

Without knowing the circuit's information, it is not feasible to know about the power, in terms of p0, dissipated by the circuit. Let us consider an instance that the circuit the following:

Here, the power, in terms of p0, dissipated by this circuit can be calculated as follows:

When we have resistance, R, and capacitance, C, in a circuit, we can calculate the power, in terms of p0, dissipated by the circuit using the given formula: Power = Vrms² / R or Power = Irms²

Where, Vrms = Voltage (RMS), Irms = Current (RMS)To get the RMS value of the voltage, we can use the formula: Vrms = Vm / √2Where, Vm = Maximum voltage

To get the RMS value of the current, we can use the formula: Irms = Im / √2

Where, Im = Maximum current

The given circuit can be solved as follows: Irms = Vrms / XC

Where XC is the capacitive reactance.XC = 1 / (2πfC)

Where f is the frequency and C is the capacitance of the circuit. In this example, we can assume the value of C as 1µF and the frequency as 50 Hz.

Thus, XC = 1 / (2π x 50 x 1 x 10⁻⁶) ≈ 3183.1Ω

Let the value of R be 1000Ω.

Substituting these values in the equation for Irms, Irms = 10 / √(1000² + 3183.1²) ≈ 2.984mAIrms² = (2.984 x 10⁻³)² ≈ 8.905 x 10⁻⁶ Watts

To find Vrms, Vm is required.

Let us consider Vm = 300V. Thus, Vrms = 300 / √2 ≈ 212.13V

Power, in terms of p0, dissipated by this circuit = Irms² R≈ 8.905 x 10⁻⁶ x 1000 = 0.008905 WIn terms of p0,

the power dissipated by the circuit = 0.06p0².

Learn more about power it at brainly.com/question/29575208

#SPJ11

The diffraction limit of a 4-meter telescope is two times smaller than that of a 2-meter telescope.

The diffraction limit of a telescope is the minimum distance between two objects so that they can still be viewed as separate from one another. It is determined by the instrument's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

In simpler terms, the diffraction limit refers to the smallest object size that a telescope can observe. This is known as angular resolution, which is determined by the telescope's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

Therefore, a 4-meter telescope has a smaller diffraction limit than a 2-meter telescope. Hence, the answer is two times smaller.

Learn more about Diffraction limit here:

brainly.com/question/15081792

#SPJ11

At every location along the string, the amplitudes of two waves that interfere with one another are added. The two separate waves combine to form the final wave.

Two transverse waves are present in this instance, one traveling to the right and the other to the left. The waves will interact destructively when they meet since their motions are in opposition.

The resultant wave f(x) at any point x on the string may be calculated by summing the two amplitudes if we let f1(x) represent the amplitude of the wave going to the right and f2(x) represent the amplitude of the wave moving to the left:

f(x) = f1(x) + f2(x)

The amplitudes of the two waves will be equal in size and facing in opposite directions when they collide. As a result, the amplitude that results will be zero, and the string will then be at rest.

The resulting wave will alternate between constructive and destructive interference as the waves continue to travel past one another.

As a result, the string will develop a pattern of nodes (points of zero displacements) and antinodes (points of maximum displacement).

The combined frequency and wavelength of the various waves as well as the rate of wave propagation along the string will determine the final wave's frequency and wavelength.

learn more about transverse waves here

https://brainly.com/question/15531840

#SPJ1

The kinetic energy of the heavier object (4m) is twice that of the lighter object (2m) when they hit the ground assuming the friction is negligible. Option B is correct.

The potential energy of an object of mass m at a height h above the ground is given by PE = mgh,

where g is the acceleration due to gravity.

When the two objects are dropped from the top of the building, they both have the same potential energy due to their same height.

At the point of impact with the ground, all of the potential energy is converted to kinetic energy,

which is given by KE = 1/2*mv²,

where v is the velocity of the object just before hitting the ground.

Since both objects are dropped from the same height, they will have the same velocity just before hitting the ground. Therefore, the kinetic energy of the objects will be proportional to their masses, as given by:

KE_{4m} = 1/2 (4m) v² = 2mv²

KE_{2m} = 1/2 (2m) v² = mv²

Comparing both of them we know the kinetic energy of the heavier object (4m) is twice that of the lighter object (2m) when they hit the ground.

Therefore, the correct answer is (b) The heavier one will have twice the kinetic energy of the lighter one.

To know more about kinetic energy:

https://brainly.com/question/8101588

#SPJ11

Main-sequence B star has the greatest surface temperature. The correct answer is a.

The surface temperature of a star is closely related to its spectral classification, which is determined by analyzing the star's spectrum. The temperature of a star's surface affects its color, with hotter stars appearing bluer and cooler stars appearing redder. Main-sequence stars are stars that are fusing hydrogen into helium in their cores.

The temperature of a star's surface depends on its spectral class, which is determined by its temperature. B stars are hotter than A stars, K stars are cooler than A stars, and supergiant stars are generally cooler than main-sequence stars of the same spectral class. Therefore,  option a, a main-sequence B star has the highest surface temperature of the three options given.

To know more about stars, here

brainly.com/question/31116168

#SPJ4