This problem can be solved using the pascal principle, which is applied for both pressures and volumes. In this case we use the definition of volumes, which says that the volume displaced fluid on one side of the Pistons should be equal to the volume displaced on the other side of the piston.
What is force?The force exerted at the large piston will be double in magnitude in comparison with the force applied at the smaller piston.
We know, according to the pascal's law,
The pressure applied at any point in the incompressible fluid is equal in magnitude at each and every point.
So,
P = Force/Area
Where P is pressure,
If pressure is same, then we can write,
F₁/A₁ = F₂/A₂
Where,
F₁ is the force applied at the small piston,
A₁ is the area of the smaller piston,
F₂ is the force at the larger piston,
A₂ is the area of the larger piston,
It is also given that, area if the larger piston is two times the area of the smaller piston so,
A₂ = 2A₁
So, putting the values we get,
F₂/F₁ = 2
So, F₂ = 2F₁
It means that the force exerted by the larger piston will be double in magnitude.
Therefore, In this case we use the definition of volumes, which says that the volume displaced fluid on one side of the Pistons should be equal to the volume displaced on the other side of the piston.
To know more about Pascal's Law, visit,
brainly.com/question/4262025
#SPJ1
List advantages of using files to provide input and output
The advantages of using files to provide input and output are: when you open an output file, the application normally creates the file on the disk and allows it to write data to it. When you open an input file, the software may read data from it.
PL/I input and output commands (such as READ, WRITE, GET, and PUT) allow you to transfer data between a computer's primary and auxiliary storage. A data set is a collection of data that exists outside of a program. Input refers to the transmission of data from a data set to a program.
A computer file is a computer resource that stores data in a computer storage device and is recognized largely by its file name. Data may be written to a computer file in the same way that words can be written on paper.
Learn more about Files:
https://brainly.com/question/14338673
#SPJ1
which of the following conditions is true when a producer minimizes the cost of producing a given level of output? multiple choice the marginal product per dollar spent on all inputs is equal. the mrts is equal to the ratio of the quantity of inputs. the marginal products of all inputs are equal. the marginal product per dollar spent on all inputs is equal and the mrts is equal to the ratio of the quantity of inputs.
All inputs have an equal marginal product for every dollar spent, and the MRTS is proportional to the volume of inputs.
Describe ratio.
A ratio in mathematics demonstrates how so many times one integer is present in another. For instance, if a dish of fruit contains eight oranges and six lemons, the ratio of oranges and oranges is eight to six (that is, 8:6, which is equivalent to the ratio 4:3). This ratio of oranges to the overall bit of fruit is 8:14, and the ratio of lemon to orange is 6:8 (or 3:4). (or 4:7). A ratio can contain statistics of any kind such as length measurements or counts of individuals or things.
To know more about ratio
https://brainly.com/question/13419413
#SPJ1
(T4_F19 Q12) Given the following HLSM: A logical OR datapath component should be instantiated for the transition condition !(K> 6) || !)? (Is an OR gate a datapath component?) HLSM Inputs: 1, K(4) Outputs: Z(4) (K>6) OK Z=0; K>6 H(K >6|19) Alarm Z=9 U (K>6) || 5 True False
It is true that the logical OR datapath component should be instantiated for the transition condition.
What's a data path?A data path is a collection of functional units that perform data processing operations. A computer system's CPU (central processing unit) is made up of datapaths and a control unit. Multiplexers can be used to join multiple data paths together to create a larger data path.
A datapath is a collection of functional units that perform data processing operations, such as arithmetic logic units or multipliers, as well as registers and buses.
The central processing unit is made up of the control unit and the central processing unit (CPU). Multiplexers can be used to join multiple datapaths together to create a larger datapath.
Memory (which stores the current instruction), PC or program counter (which stores the address of the current instruction), and ALU are examples of simple datapath components (executes current instruction).
In this case, this is true because there is transition of both signal or condition ( whatever ) K>6 and !((K>6||!j) . Otherwise mixing them will cause an error.
Learn more about data path on:
https://brainly.com/question/13014283
#SPJ1
Given the following two-dimensional array declaration, which statement is true? int [ ] [ ] numbers
=
new int
[6][9]
; The numbers array has 6 rows and 9 columns. The numbers array has 15 rows. The numbers array has 54 rows. The numbers array has 6 columns and 9 rows.
The true statement about the array is A. The numbers array has 6 rows and 9 columns
What is an array?The array is named and the type of its elements are specified in a "array declaration." It can also specify how many elements are in the array. A variable of array type is regarded as a pointer to the array elements' type.
In Java, we declare an array similarly to other variables by providing a type and a name: myArray; int[] We can use the following shorthand syntax to initialize or instantiate an array as we declare it, which means we assign values as we create the array: myArray = 13, 14, 15;20 int[]
In conclusion, the correct option is A.
Learn more about array on:
https://brainly.com/question/24275089
#SPJ1
A business can use a wiki in the following ways EXCEPT _____.
A. accessing schedules and procedures
B. exchanging ideas
C. sharing policies
D. aggregating content
A business can use a wiki in the following ways except aggregating content. Hence, option D is correct.
What is aggregating content?A business known as a content aggregator gathers media content, apps, or both from online sources for use or sale later on. It is a technique for curating content. The two types of content aggregators are those who gather news and other content from various sources for putting on their own websites.
Content aggregation is the process of gathering information on any topic in order to publish it on a single platform, website, or blog. It collects data solely based on keywords and is automated.
Thus, option D is correct.
For more information about aggregating content, click here:
https://brainly.com/question/7692248
#SPJ1
what is the minimum number of internal nodes in a binary tree with 8 nodes?
4 is the minimum number of internal nodes in a binary tree with 8 nodes.
What is Binary Tree?
A Binary tree is represented by a pointer to the tree's topmost node (commonly referred to as the "root"). If the tree is empty, then the root value is NULL.
Each node in the tree contains the following information:
DataPointer to the child on the leftarrow pointing to the right childCommon operations:
1. Insertion
Elements in a binary tree can be added in any order. The root node is created during the first insertion operation.
2. Deletion
A binary tree element can also be removed.
3. Tree climbing
Traversal is another common tree operation. The process of visiting each node in a tree is known as tree traversal.
To learn more about Binary Tree, visit: https://brainly.com/question/16644287
#SPJ4
vmware's airwatch and cisco's meraki systems manager are both examples of what type of software?
Vmware's airwatch and cisco's meraki systems manager are both examples of option a. mobile device management software.
How does Cisco Meraki software functions?In regards to computing, a firewall solution called Cisco Meraki is made to assist companies in the government, healthcare, manufacturing, hospitality, financial, educational, and retail industries secure and manage software-defined networking in wide area networks (SD-WAN) across the cloud.
Therefore, one can say that IT administrators can monitor, manage, and secure personally or professionally owned mobile devices that are running a variety of operating systems with the help of MDM software or MDM solutions, which are seen as the types of management or security technology. Other names for it include mobile device management software, MDM server, and MDM client.
Learn more about management software from
https://brainly.com/question/13163019
#SPJ1
See full question below
7. VMware's AirWatch and Cisco's Meraki Systems Manager are both examples of what type of software?
a. mobile device management software
b. software defined network software
c. virtual device management software
d. cloud network management software
SIEM includes the following log: May 21 07:41:22 pcx02 sshd[703): Accepted password for root from 10.10.1.1 port 55811 ssh2 does that mean? a. pcxO2 connection was established at 07:42 with a root username. b. ApexO2 connection was established on 05/21 with an admin username, c. An SSH connection was established on 05/21 with a root username. d. An SSH connection was established on 05/21 with an admin username.
If SIEM includes the following log: May 21 07:41:22 pcx02 sshd[703): Accepted password for root from 10.10.1.1 port 55811 SSH2, what this means is that "An SSH connection was established on 05/21 with a root username" (Option C).
What is a root username?In OS X 10.10 or before, the user called root, or superuser, is a special user account with unfettered read-and-write capabilities to all sections of the file system. However, with OS X 10.11 or later, the root user's write access to some file system locations is limited.
The distinction between a normal user and a root user is that the root user is essentially identical to the administrator user on Windows – the root user has full access to the system and can do anything. Normal Linux users have limited rights, for example, they cannot install software or write to system folders.
Learn more about SSH Connection:
https://brainly.com/question/29023393
#SPJ1
what is the phy type of the unnamed network
The unnamed network's phy type is 802.11 g/n.
What is PHY Mode (a/b/g/n/ac/ax) Coverage?
You can see which 802.11 protocols (a, b, g, n, ac, or ax) are present in your scanning area using the PHY Mode Coverage visualization:
Color purple denotes 802.11a
Green indicates 802.11b.
Color yellow denotes 802.11g.
Red denotes 802.11n.
802.11ac is represented by light blue.
802.11ax is represented by magenta.
Dark Grey indicates regions where there are no frequencies detected above the settings-specified Mode PHY Coverage Signal Level.
Two protocols overlap when they have a color that differs from those in the list above. Orange, for example, denotes a combination of n and g. The protocol(s) present will be highlighted in black on the colored map key on the bottom-right of the screen when you hover over a point on the map.
To know more about protocols, check out:
https://brainly.com/question/26155668
#SPJ1
what is returned by system.in.read() when data is no longer available?
The value returned by system.in.read() when data is no longer available is -1.
What do you mean by return value?
The calling function regains control after a function's execution is completed with a return statement. The point immediately after the call is where execution returns to the caller function. A value may be returned to the calling function with a return statement.
Before the end statement of the function, you must include a return statement and the value to be returned in order for the function to return a value. The value that the function returns is unpredictable if a return statement or a value is omitted after the keyword return.
To learn more about a return value, use the link given
https://brainly.com/question/29388112
#SPJ4
You plan to implement a new security device on your network. Which of the following policies outlines the process you should follow before implementing that device?
a. Change management
b. Acceptable use
c. Resource allocation
d. SLA
Change management policies outlines the process you should follow before implementing that device.
What is change management policies?Change management is the term used to describe the procedure used to manage the entire lifespan of changes. Change Management Policy: Change Management Policy is the guiding standard that outlines the processes for various sorts of Changes as well as the regulations and degrees of permission necessary to approve them.The extent of the change, locations affected, back-out procedure, testing completed, communication plan, and anticipated date of deployment must all be specified in the documentation. This should be done at a level that guarantees the scope can be completed as defined and that the change will result in the anticipated outcome.To learn more about Change management policies refer to:
https://brainly.com/question/20373684
#SPJ4
If photos need to be emailed or uploaded to a Web page,choose the ____ ppi compression setting. A)50 B)96 C)150 D)220
One css file can be reused in multiple html files to save time for similar html code. If css file is imported globally in html file it can be really useful to make design changes to the website just by changing the global css file.
What is stylesheet?All the changes made in that file would be reflected in all html files where that particular stylesheet is included. Draft a sample HTML file to display the current date and time.
While importing a stylesheet one can link multiple stylesheets with multiple screen size so that for a particular screen size a particular stylesheet is loaded.
Therefore, One css file can be reused in multiple html files to save time for similar html code. If css file is imported globally in html file it can be really useful to make design changes to the website just by changing the global css file.
Learn more about css file on:
https://brainly.com/question/27873531
#SPJ1
Which of the following is required to take advantage of the performance benefits offered by the multi-channel memory architecture? (select all that apply)
a. Installing memory modules of matching types
b. Installing memory modules of matching speeds
c. Installing memory modules in any of the free memory slots on the motherboard
d. Installing memory modules of the same capacity
e. Installing modules in appropriate memory slots (slots of matching color) on the motherboard
Installing memory modules of matching types, Installing memory modules of matching speeds, Installing memory modules of the same capacity and Installing modules in appropriate memory slots (slots of matching color) on the motherboard.
What is a memory module?
Memory-integrated circuits are installed on a printed circuit board known as a memory module or RAM stick in computing. In electronic systems, particularly PCs like personal computers, workstations, and servers, memory modules allow for simple installation and replacement. They are always found within the computer case because memory modules plug directly into the motherboard. The computer must be turned off and the casing opened in order to access the modules before you may reinstall RAM.
To learn more about a memory module, use the link given
https://brainly.com/question/29659922
#SPJ4
Which of the following cloud computing solutions will deliver software applications to a client either over the internet or on a local area network?
IaaS
PaaS
DaaS
SaaS
PaaS is the one which helps in delivering the software applications to a client either over an internet or local area network
What is PaaS?
Software applications are delivered to the customer through PaaS via the internet or a local area network. - Infrastructure such as processing, storage, networks, and virtualized environments are delivered to the client by PaaS.
Many things are done with the help of PaaS where the customer who works will on various software here the cloud computing will help in transferring the data to the client safely
Through PaaS, customers receive software applications over the internet or a local area network. - PaaS provides the client with infrastructures like processing, storage, networks, and virtualized environments.
Hence to conclude PaaS has to be involved in the cloud computing solutions that will deliver the applications to the client over the lan or internet
To know more on PaaS follow this link:
https://brainly.com/question/20600180
#SPJ4
Compared with a large-scale integrated multi-purpose computer, a quantum computer is a _____ computer. high-powered multi-purpose slower integrated high-speed parallel high-speed integrated
high powered multipurpose computer.
What is a computer?
A computer is a piece of electronic equipment used to manipulate data or information. Data can be stored, retrieved, and processed by it. You may already be aware of the fact that you can use a computer to browse the Internet, send emails, type documents, and play games. It can also be used to edit or make presentations, videos, and spreadsheets.
What is multipurpose computer?
These computers have an operating system that allows multiple applications to run simultaneously. Devices like servers, laptops, and smartphones are a few examples.
To know more about computer, check out:
https://brainly.com/question/21474169
#SPJ1
fill in the blank. One important consideration is that data are made available in different forms so that users with different ______ abilities can make sense of them.
One important consideration is that data are made available in different forms so that users with different cognitive abilities can make sense of them.
What are cognitive abilities?
Cognitive abilities are brain-based skills that we require to complete any task, from the most basic to the most complex. They are more concerned with the mechanisms that govern how we learn, remember, problem solve, and pay attention than with actual knowledge.
Answering the phone, for example, requires perception (hearing the ring tone), decision making (answering or not), motor skill (lifting the receiver), language skills (speaking and understanding language), and social skills (interpreting tone of voice and interacting properly with another human being).
To know more about data, visit: https://brainly.com/question/20523497
#SPJ1
mashup developers usually include additional apis on the mashup site that generate revenue by linking to customized
Mashup developers usually include additional APIs on the mashup site that generate revenue by linking to customized advertisings.
What is mashup?In web development, a "mashup" is a web page or web application that combines content from various sources to produce a single new service that is presented in a single graphical user interface. This term comes from the computer industry.
A user could, for instance, make a map mashup by fusing the locations, images, and contact information for their local library branches with a G∅∅gle map.
The term suggests simple, quick integration, frequently utilizing open application programming interfaces (open API) and data sources to produce enriched results that were possibly not the intended use for the original raw source data. By combining elements from two or more sources, the term "mashup" first appeared.
Learn more about mashup
https://brainly.com/question/29523786
#SPJ4
What is the missing line of code to have the following output?
Output Pat Jones PJ23
class cholesterol
low Density = 0
highDensity = 0
class patient
def __init__(self firstName, lastName idNum):
self firstName = firsiName
self lastName = lastName
selfdNum = idNum
Thus, the missing line of code to have the following output is ("\'hi").
We connect with technology through coding, often known as computer programming. Coding is similar to writing a sequence of instructions since it instructs a machine on what to do. You can instruct machines what they should do or how and when to react much more quickly by knowing how to compose code.
def __init__(self firstName, lastName idNum)
Suggest that there will be a console log that will be needed in the code.
The coded line that was missing is ("\'hi"). This will make the coding complete.
Learn more about code, here:
https://brainly.com/question/17204194
#SPJ1
you use the following command to create a new directory: md yellow what will the path be to the new directory?
Various techniques may be employed, depending on the operating system or the location where the directory is being created.
What is the purpose of the command for browsing the current directory's contents?The dir command is part of the Windows command processor and is used to list the files and folders in the current directoryCommand is referred to by the acronym.The command-line interpreter for Windows operating systems is called Command Prompt, or CMD.The "MS-DOS Prompt" is a command-line interface similar to which is used in DOS and Windows 9x systems.It is comparable to Unix Shells, which are used on similar systems to Unix.To learn more about operating system refer to:
https://brainly.com/question/22811693
#SPJ4
Which of the following declares an abstract method in an abstract Java class?
A.public abstract method();
B.public abstract void method();
C.public void abstract Method();
D.public void method() {}
The option that declares an abstract method in an abstract Java class is option(B.) public abstract void method().
In Java, are abstract methods compatible with abstract classes?Class and method abstraction is when Objects cannot be created using the abstract class, which is a restricted class. In addition to not having a body, an abstract method is only applicable to abstract classes. Subclasses provide the body.
Hence, consists of only the method definition and not any implementation. An Abstract Method is a method that doesn't have a body. A class that is abstract must declare it. Due to the need for the abstract class to implement each abstract method, the abstract method can never be considered final.
Learn more about abstract method from
https://brainly.com/question/15684705
#SPJ1
A paragraph when left aligned is called
Answer:
hanging paragraph.
Explanation:
its a hanging paragraph. why you ask?
its left aligned so of course its hanging
assume that the string oldstring contains at least 4 characters. a programmer is writing a code segment that is intended to remove the first two characters and the last two characters from oldstring and assign the result to newstring.
A programmer is creating a segment of code with the goal of removing the first two and last two characters from oldString and assigning the outcome to newString.
What is a Java String? A string is an object in Java that symbolizes a collection of characters or char values. A Java string object is created using the java.lang.String class.A String object can be created in one of two ways:using Java's string literal Double quotes are used to produce string literals.For instance: s="Welcome" string;
Using the keyword "new," a Java String can be produced.
For instance: String s=new String("Welcome"); This creates two objects—one in the heap and one in the string pool—as well as one reference variable, with the variable's' referring to the object in the heap.Let's now examine Java String pool in more detail.Java String Pool: Heap memory is used to store a collection of Strings as the Java String Pool. In this, the first thing the String Pool does after creating a new object is to determine whether or not the object is already in the pool. If it is, the variable receives the same reference back if not, a new object will be created in the String pool, and the appropriate reference will be returned. For better understanding, please see the diagrammatic representation.Two Strings, "Apple" and "Mango," were created using literal in the image above. Now, when the third String is created with the value "Apple," the existing object reference is returned rather than creating a new object. That is the rationale behind the introduction of the Java String pool.Before we continue, it's important to note that Strings in Java are immutable, unlike other data types. Immutable refers to the fact that Strings are constant; once they are created, their values cannot be altered. String objects can be shared because they cannot be changed. As an illustration:The following is the equivalent of the string str="abc":char data[] = 'a', 'b', 'c';
String str = new String(data);
Let's now examine a few of the built-in methods in the String class.To Learn more About newString refer To:
https://brainly.com/question/14675668
#SPJ1
a is the general logical structure in which records are stored within a database and the method used to establish relationships among the records.
A database model is the overarching conceptual framework for storing records within a database and the process for establishing relationships between those records.
How Does Data Modeling Work?Data modeling entails creating data objects for subsequent usage and visualizing the data dependencies of an app.The general conceptual framework for keeping records in a database and the procedure for creating connections between those records is known as a database model.Data modeling is referred to as the key stage in software engineering that entails assessing all the data dependencies for the application, explicitly outlining how the data will be used by the software (typically through visualizations), and defining data objects that will be stored in a database for future use.To illustrate how various data points and organizational structures are connected, data modeling is the process of creating a visual representation of all or a portion of an information system. The objective is to describe the various forms of data that are utilized and kept in the system.To learn more about database refer to:
https://brainly.com/question/518894
#SPJ4
today, most organizations use the traditional approach to data management, where multiple information systems share a pool of related data.
The most common style of organizational chart is one with a hierarchical structure.
Traditional relational databases: what are they?Users can manage preset data relationships across various databases using standard relational databases. Standard relational databases include the likes of IBM DB2, Microsoft SQL Server, Oracle Database, and MySQL.
Traditional data management: What is it?Traditional data: The structured data that is primarily maintained by all sizes of businesses, from very small to large organizations, is referred to as traditional data. A fixed format or fields in a file were used to store and maintain the data in a traditional database system's centralized database architecture.
To know more about traditional data visit:-
https://brainly.com/question/14525283
#SPJ4
you manage the desktop computers at your company. you are in charge of 100 computers, all of which run windows 7. you want to upgrade all computers to windows 10. prior to the upgrade, you need to verify the compatibility of each computer with windows 10. you want to gather the necessary information as quickly as possible.
A clean install is required if you want to install a 64-bit version of Windows on a machine that currently runs a 32-bit operating system.
whenever another operating system, such as MacOS or Linux, has to be able to read the device. You can create, store, and launch administrative tools, known as consoles, that control the hardware, software, and network components of your Microsoft Windows operating system using the Microsoft Management Console (MMC). All currently supported client operating systems can run MMC. You will need to enter a product key if you are using bootable installation media to complete a clean install on a computer that has never been upgraded to Windows 10 and activated.
Learn more about operating here-
https://brainly.com/question/13375207
#SPJ4
parallel arrays use the same subscript to build relationships between data stored in two or more arrays.
It is true that relationships between the data contained in two or more parallel arrays can be created by utilizing the same subscript.
What steps are necessary to create a parallel relationship between two or more arrays? The same subscript value can be used for each array to establish a parallel relationship between two or more arrays.Elements are the names for the distinct values that make up an array. A numeric point in the array called an index can be used to refer to any element in the array. All array indexes in Java start at zero. The index is specified using square brackets. The kind of values that an array can store is known as its element type.It is true that relationships between the data contained in two or more parallel arrays can be created by utilizing the same subscript.The complete question is,
To create connections between data contained in two or more arrays, parallel arrays employ the same subscript. TRUE/FALSE.
To learn more about Array refer to:
https://brainly.com/question/28061186
#SPJ4
(Python 3.5, short and simple codes please)Two non-negative integers x and y are equal if either:Both are 0, orx-1 and y-1 are equalWrite a function named equals that recursivelydetermines whether two parameters (both containing integer values)are equal and returns True or False.
The programs that illustrate the non-negative integers x and y is given below:
def equals(x, y):
if x == 0:
return y == 0
elif y == 0:
return x == 0
else:
return equals(x - 1, y - 1)
What is a program?A computer program is a set of instructions written in a programming language that a computer can execute. The software includes computer programs as well as documentation and other intangible components.
The ways to do the program will be:
Define the program's purpose. Consider the program that is currently running on the computer. Create a program model using design tools. Examine the model for logical flaws. Create the source code for the program. Build the source code. Correct any compilation errors that were discovered.Learn more about programs on:
https://brainly.com/question/26642771
#SPJ1
Which of the following is not true about static methods? a. It is not necessary for an instance of the class to be created to execute the method. b. They are created by placing the key word static after the access specifier in the method header c. They are called from an instance of the class. d. They are often used to create utility classes that perform operations on data, but have no need to collect and store data.
It is not necessary for an instance of the class to be created to execute the method that is not true about static methods. Thus, option A is correct.
What is static methods?
A static method is a procedure that is declared as a constituent of the an object but can only be accessed from constructor of either an API object, not from an instances of both the object generated using the constructor.
A static method serves two primary objectives: For assistance or utility methods that don't necessitate called as data. Static methods remove the requirement for the client to create the item only to call its method because class variables are not required to be accessed.
Static methods do not require the creation of a standards for different in order to be used; this is false. Therefore, option A is the correct option.
Learn more about static methods, here:
https://brainly.com/question/29217325
#SPJ1
Intermediate JavaScript. Fill in the Solutions. Dont guess!
#1 part 1
Assign re with a regular expression that verifies a phone number with an optional leading 1. Ex: 1-800-555-2468 or 800-555-2468
code-
var re /* Your solution goes here */;
-----------------------------------------------------------------
#1 part 2
If "wallColor" is in localStorage, store the result in bedroomColor variable. Otherwise, do not change bedroomColor.
code-
var bedroomColor = 'initial';
/* Your solution goes here */
Regex. Pattern. Method matches() This function compares the input phone number to the regular expression for the phone number, returning true if they match and false otherwise.
What expression verifies phone number optional leading?Any character between the brackets can be located by using the [0-9] expression. Any number or range of integers between 0 and 9 may be used for the digits included in brackets. Tip.
Match any character that shows zero or more times from start to finish. In plain English, that means to match the entire string, beginning to end.
Therefore, To locate any character that is NOT a digit, use the [0-9] expression.
Learn more about phone number here:
https://brainly.com/question/14565029
#SPJ1
Sam wanted to create a variable to store a list of movies that he was excited about seeing. They wrote !movie = "The Dark Depths" but got an error message. What was wrong with the code? A. A variable name needs a capital letter. B. A variable name can’t begin with a special character such as !. C. Instead of an equals sign, the code should use the word is. D. There can’t be spaces in between the words "The Dark Depths". No links pls
If Sam wanted to create a variable to store a list of movies that he was excited about seeing, then wrote !movie = "The Dark Depths" but got an error message. The problem with the code is: "A variable name can’t begin with a special character such as !." (Option B)
What is a Variable Name in programming?A variable is a symbolic name (or reference to) data. The name of the variable symbolizes the information it contains. Variables are so named because the information represented by them can change while the actions on the variable stay constant.
A variable name must begin with a letter or an underscore ( ). A variable name must not begin with a number. Variable names are limited to alphanumeric letters and underscores (a-z, A-Z, 0-9, and ). The case of variable names matters (age, Age and AGE are three different variables)
Learn more about Coding:
https://brainly.com/question/14461424
#SPJ1
