an arrow leaves a bow with a speed of 42 m/s. its velocity is reduced to 34 m/s by the time it hits its target. how much distance did the arrow travel over if it were in the air for 2.4 seconds?

ΔP = (970 kg/m^3)(7.0 m/s^2)(4.26 m) = 29,852 Pascal. Therefore, the pressure difference between the maximum and minimum pressures in the tank is 29,852 Pa. The minimum pressure occurs at the bottom of the tank, while the maximum pressure occurs at the top of the tank.

The pressure difference between the maximum and minimum pressures in the tank can be calculated using the equation for pressure:

P = ρgh

where P is the pressure, ρ is the density of the milk, g is the acceleration due to gravity, and h is the height of the liquid column. Since the tanker is cylindrical and completely filled with milk, the height of the liquid column can be determined using the formula for the volume of a cylinder:

V = πr^2h

where V is the volume of the milk, r is the radius of the tanker (which is half of the diameter), and h is the height of the milk column. Solving for h, we get:

h = V / (πr^2)

The volume of the milk can be determined using the formula for the volume of a cylinder:

V = πr^2h

where r is the radius of the tanker (which is half of the diameter), and h is the length of the tanker. Substituting the given values, we get:

V = π(3/2)^2(9) = 31.8 m^3

The height of the liquid column is:

h = V / (πr^2) = 31.8 / (π(3/2)^2) = 4.26 m

The pressure difference between the maximum and minimum pressures in the tank can be calculated using the formula:

ΔP = ρgh

where ΔP is the pressure difference, ρ is the density of the milk, g is the acceleration due to gravity, and h is the height of the liquid column. Substituting the given values, we get:

ΔP = (970 kg/m^3)(7.0 m/s^2)(4.26 m) = 29,852 Pa

Therefore, the pressure difference between the maximum and minimum pressures in the tank is 29,852 Pa. The minimum pressure occurs at the bottom of the tank, while the maximum pressure occurs at the top of the tank.

For more such questions on Pressure

https://brainly.com/question/20492463

#SPJ11

The work done on the saw by the force if the displacement is along the straight-line y = x that connects these two points is -640.0 J.

To calculate the work done on the saw by the force as it moves along the straight-line y = x that connects the two points, we need to first find the displacement vector and then use it to calculate the work done.

The displacement vector from the origin to point C is given by:

r = (4.0 m) i + (4.0 m) j

The force acting on the saw is given by:

F = -kxy² j = -2.50 (N m³) (x) (y²) j

Since it is moving along the straight-line y = x, we can substitute x = y into the expression for F:

F = -2.50 (N m³) (x) (y²) j = -2.50 (N m³) (y³) j

Substituting x = y = 4.0 m:

F = -2.50 (N m³) (4.0 m)³ j = -160.0 j N

The work done by the force is given by the dot product of the force and displacement vectors:

W = F · r = (-160.0 N j) · (4.0 m i + 4.0 m j)

W = (-160.0 N) (4.0 m cos(45°))

W = -640.0 J

Therefore, the work done on the saw by the force as it moves along the straight-line y = x that connects the two points is -640.0 J.

Find out more on Cartesian system here: https://brainly.com/question/4726772

#SPJ1

Answer:

The original mass of the substance was 10g.

Explanation:

The half-life of a radioactive substance is the amount of time it takes for half of the substance to decay. In this case, the half-life is 5 hours.

We can use the half-life formula to find the original mass of the substance:

N = N0 * (1/2)^(t/T)

where:

---N0 is the initial mass of the substance

---N is the remaining mass of the substance after time t

---T is the half-life of the substance

We know that after 20 hours, only half of the substance remains:

N = N0 * (1/2)^(20/5) = 0.5 * N0

If we solve for N0, we get:

N0 = N / 0.5 = 5g / 0.5 = 10g

Therefore, the original mass of the substance was 10g.

The annual cost of electricity at a billing rate of $0.13 per kWhr for a waterbed heater that uses 450 W of power is $36.51.

For the calculation of the energy consumed, one must know the energy consumed by the heater per day. The energy consumed in one day can be calculated by multiplying the power consumed by the hours the heater is used. The power consumed by the heater is 450 W.

The heater is used 35% of the time and is off 65% of the time. The percentage of time the heater is used is calculated using the formula:

Percentage of time the heater is used = (Time heater is on/Total time) × 100

Percentage of time the heater is used = (35/100) × 100

Percentage of time the heater is used = 35%

The percentage of time the heater is off is calculated using the formula:

Percentage of time the heater is off = (Time heater is off/Total time) × 100

Percentage of time the heater is off = (65/100) × 100

Percentage of time the heater is off = 65%

Thus, the heater is used for 8.4 hours per day (i.e., 24 hours × 35%) and is off for 15.6 hours per day (i.e., 24 hours × 65%).

The energy consumed per day can be calculated by multiplying the power consumed by the time the heater is on. Energy consumed per day = Power consumed × Time heater is on

Energy consumed per day = 450 W × 8.4 hours

Energy consumed per day = 3780 Wh

Energy consumed per day = 3.78 kWh

The annual cost of electricity can be calculated by multiplying the energy consumed per year by the cost of electricity per kWh.

Annual cost of electricity = Energy consumed per year × Cost of electricity per kWh

Annual cost of electricity = 3.78 kWh × $0.13/kWh

Annual cost of electricity = $0.4914/day

Annual cost of electricity = $179.31/year

Hence, the annual cost of electricity at a billing rate of $0.13 per kWhr for a waterbed heater that uses 450 W of power is $36.51.

Learn more about Power here:

https://brainly.com/question/27442707

#SPJ11

4.92 m/s for her final velocity.

The momentum of the skater before throwing the stone is:

p1 = m1 * v1 = 50 kg * 5 m/s = 250 kg*m/s

where m1 is the mass of the skater and v1 is her initial velocity.

When the skater throws the stone, the total momentum of the system (skater + stone) is conserved. The momentum of the stone is:

p2 = m2 * v2 = 2 kg * 2 m/s = 4 kg*m/s

where m2 is the mass of the stone and v2 is its velocity.

Let's assume the skater throws the stone in front of her. To conserve momentum, the skater will move in the opposite direction to the stone. Let's call the skater's final velocity v3. Then:

p1 = p2 + p3

where p3 is the momentum of the skater after throwing the stone. Substituting the values we get:

250 kgm/s = 4 kgm/s + 50 kg * v3

Solving for v3, we get:

v3 = (250 kgm/s - 4 kgm/s) / 50 kg = 4.92 m/s

So the skater's speed after throwing the stone in front of her is 4.92 m/s.

If the skater throws the stone behind her, the same conservation of momentum principle applies, and we get the same result of 4.92 m/s for her final velocity.

Sorry if I'm wrong

The position expectation value as a function of time is constant and is equal to L/3.

Given a particle in an infinite square well potential has an initial wave function Ψ (x, t = 0) = Ax (L - x).The time evolution of the state vector: The time evolution of the state vector is given by Ψ(x,t) = ΣC_nΨ_n (x) e^(-iE_n t/h).The expectation value of the position as a function of time:The expectation value of the position as a function of time is given by the formula given below:x = Σa_n^2x_nΨ_n(x)Ψ_n*(x). Where,

a_n is the coefficient for each energy level.

Energy levels for infinite square well potential is given byE_n = n^2h^2 / 8mL^2Now, let us find the value of coefficient A. We know that a particle in a square well is normalized using the following formula:

∫Ψ^2 dx = 1. 0 to L∫Ax(L-x)^2dx = 1A(L^3)/3 = 1, A = √(3/L^3).

Now, the wavefunction for the particle is given by:

Ψ (x, t = 0)

= Ax (L - x)

= √(3/L^3) x (L - x).

Now, we can express this wave function in terms of the energy eigenfunctions as below:

Ψ (x, t = 0)

= Σ a_nΨ_n (x)

= Σa_n sin((nΠx)/L).

We can calculate the value of coefficient a_n by integrating the product of the initial wavefunction with the energy eigenfunctions, which is given by: a_n = 2/L ∫Ψ(x, t = 0) sin((nΠx)/L) dx.

Now, let us calculate the value of coefficient

a_n.a_n = 2/L ∫Ψ(x, t = 0) sin((nΠx)/L) dxa_n

= 2/L ∫√(3/L^3) x (L - x)sin((nΠx)/L) dxa_n = 2√3/L^2 ∫x(L - x)sin((nΠx)/L) dx.

From the previous results of integration,

a_n = (-1)^n+1 24√3/nΠ^3

a_n = (-1)^n+1 24√3/nΠ^3

Ψ(x,t) = ∑ a_nΨ_n(x) exp(-iE_n t/ℏ). Where E_n = n²h²π² / 2mL².

Substituting the values of a_n in the above formula, Ψ(x,t) = Σ(-1)^n+1 24√3/nΠ^3 sin(nΠx/L) exp(-in²π²h²t/2mL²ℏ²). Expectation value of the position as a function of time: The expectation value of the position is given by the formula, x = Σa_n²x_n. Where x_n is the position of nth energy level.

So, x_n = L/nSo,x = L∑a_n²/n From the previous results of coefficient, Σa_n²/n = 1/3. Now, x = L/3. Hence the position expectation value as a function of time is constant and is equal to L/3.

Learn more about expected value: brainly.com/question/24305645

#SPJ11

A distance d/√2 to the left of the left wire and also a distance d/√2 to the right of the right wire. The correct option is C.

Let's consider a point P at a distance d/√2 to the left of the left wire. At this point, the magnetic field due to the left wire is:

B₁= μ₀I/(2π(d/√2))

Similarly, the magnetic field due to the right wire at point P is:

B₂ = μ₀I/(2π((d/√2)+d))

The net magnetic field at point P is:

Bnet = B₂ - B₁ = μ₀I/(2π((d/√2)+d)) - ₀/(2π(d/√2))

Simplifying this expression, we get:

Bnet = μ₀I/(2πd)

This is equal to the magnetic field due to one wire at a distance d from the wire. Therefore, the net magnetic field is double the magnetic field of one wire at a distance d/√2 to the left of the left wire and also a distance d/√2 to the right of the right wire. Option C is correct.

To learn more about magnetic fields follow

https://brainly.com/question/12981734

#SPJ11

The visible light spectrum is the range of wavelengths the human eye can detect, ranging from 380 to 700 nanometers.

People think of the sun, light bulbs, candles, and flames when they think of light, but visible light originates from many sources and in many hues. Other visible light sources include television and computer displays, glow sticks, and pyrotechnics.

This is why this area of the electromagnetic spectrum is known as the visible spectrum or colour spectrum. It primarily comprises of seven colours: violet, blue, green, yellow, orange, and red.

Learn more about visible light spectrum

brainly.com/question/18704022

#SPJ1

Answer:

It is the three spots where there are lines. Between 400 and 500(the two lines), between 600 and 700(the two lines), and the one line between 700 and 800.

The resulting displacement will be 3.4 km. The correct option is A.

The displacement is calculated by finding the displacement from east to west, which is 2.0 km, and subtracting the displacement from north to south, which is 1.0 km.

A student walks 1.0 kilometers due east and 1.0 kilometers due south. Then she runs 2.0 kilometers due west. The magnitude of the student's resultant displacement is closest to 3.4 km.

To begin with, we may use the Pythagorean Theorem to determine the resultant displacement's magnitude. The Pythagorean Theorem is a formula that is used to determine the length of a right triangle's sides when one is missing. This theorem is used to calculate the magnitude of the resultant displacement, which is a quantity. It's a good idea to draw a diagram to help you understand the problem.

Here's a rough sketch of the scenario: We will now apply the Pythagorean theorem in this way: The resultant displacement's magnitude is 3.4 kilometers. Thus, the correct option is A.

To know more about displacement follow

https://brainly.com/question/14637077

#SPJ11

The following formula can be used to determine the work involved in moving a charge via an electric potential difference:

W = qΔV

where W stands for work completed, q for charge transported, and V for potential difference.

Inputting the values provided yields:

W = (3.0 C) x (1.5 V) = 4.5 J

As a result, 3.0 C moving across a 1.5 V electric potential differential requires 4.5 J of labour.

Response: D) 4.5 J

learn more about electric potential here:

https://brainly.com/question/12645463

#SPJ4

Answer:

1. Net force: 60N (⭐️)

Direction: West

2. Net force: 60N

Direction: East

3. Net force: 18N (⭐️)

Direction: East

4. Net force: 20N

Direction: No movement

5. Net force: 20N

Direction: No movement

Explanation:

Hope you understand :)

The rank order of expected metallicities, from lowest to highest, is Halo, Bulge, and Thin Disk.

The expected metallicities of the components of our galaxy, ranked from lowest to highest, are as follows:

1. Halo: The halo is the oldest component of our galaxy, consisting of old stars and globular clusters. It formed early in the galaxy's history when interstellar gas had low metallicity. Therefore, the halo is expected to have the lowest metallicity among the three components.

2. Bulge: The bulge is the central, densely packed region of the galaxy. It contains a mix of old and intermediate-age stars. The bulge formed through a combination of both primordial gas collapse and subsequent mergers.

3. Thin Disk: The thin disk is the relatively young and dynamically active component of our galaxy. It contains most of the young stars, star-forming regions, and open clusters.

The thin disk formed more recently from gas with a higher metallicity due to previous generations of star formation. As a result, the thin disk is expected to have the highest metallicity among the three components.

Know more about metallicity:

https://brainly.com/question/29404080

#SPj12

The orbital speed of the second satellite is 6.55 × 10³ m/s.

The formula used to find the orbital speed of a satellite is given as v=√(GM/r).

Therefore, the value of the first satellite's speed is given as v₁=1.89×104 m/s, and the radius is r₁=2.76×106 m. Using the above formula, the mass of the planet is given as:

M= v²r/G= (1.89×104 m/s)² (2.76×106 m)/(6.6743 × 10⁻¹¹ Nm²/kg²) = 5.31 × 10²⁴ kg.

Now, the orbital speed of the second satellite, given as v₂, is equal to:

v₂ = √(GM/r₂); where G = gravitational constant = 6.6743 × 10⁻¹¹ Nm²/kg²;

M = mass of the planet = 5.31 × 10²⁴ kg;

r₂ = radius of orbit of the second satellite = 6.98 × 10⁶ m.

Substituting the values given above, we get:

v₂ = √(GM/r₂)= √[(6.6743 × 10⁻¹¹ Nm²/kg²) × (5.31 × 10²⁴ kg) / (6.98 × 10⁶ m)] = 6.55 × 10³ m/s

To know more about "orbital speed" refer here:

https://brainly.com/question/541239#

#SPJ11

Answer: The model star/planet would have to be 1,000 km away from the next closest star.

Explanation:
We need to find out the distance required for the distances in the system to be in scale.

Let's use the proportion to solve the problem:

1 m/4 × 10⁷ km = x/4 × 10¹³ km

Where x is the distance required for the distances in the system to be in scale.

Cross-multiply: 4 × 10¹³ km × 1 m = 4 × 10⁷ km × x

Simplify: 4 × 10¹³ m = 4 × 10⁷ x

Divide both sides by 4 × 10⁷ :1 × 10⁶ = x

Therefore, the distance required for the distances in the system to be in scale is 1 × 10⁶ m or 1,000 km.

So the model star/planet would have to be 1,000 km away from the next closest star.

Learn more about distance here

https://brainly.com/question/26550516

#SPJ11

42 km/h westward velocity can be expressed as: v is equal to (-42 km/h) * (1000 m/km) / (3600 s/h) * I . Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).

where the unit vector pointing west is called i. If we condense this expression, we get: v = -11.67 m/s * I Hence, -11.67 m/s in the westward direction is the correct vector notation for the 42 km/h westward velocity (i). North of the reference point, position 6.5 measured in metres, can be expressed as: r = 6.5 m * j where j represents the unit vector pointing north. Hence, 6.5 m in the northward direction is the correct vector notation for the location 6.5 m north of the reference point (j). It is possible to express a downward acceleration with a magnitude of 1.9 in m/s2 as follows: a = -1.9m/s^2 * k where k is the unit vector in the downward direction. Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).

learn more about vector notation here:

https://brainly.com/question/17264346

#SPJ4

Answer:

It blocks some light, but not all.

Explanation:

The point of polarization is to get the light to travel in a single plane. The light waves occur in a single plane. The direction of the vibration of the waves is the same. With two polarized filters, it is possible to block out nearly all the light.

Answer: 22.4%

Explanation: A = 49/201 0.24378109 B= 11/49 0.2244898 AxB/A I took the quiz, this is correct

The probability that a randomly selected player won a bronze medal given that the player represented Spain is b)24.4%.

To calculate this probability, we need to use conditional probability formula: P(Bronze Medal | Spain) = P(Spain and Bronze Medal) / P(Spain), where P(Spain and Bronze Medal) represents the number of players from Spain who won a bronze medal, and P(Spain) represents the total number of players who represented Spain.

From the given two-way frequency table, we can see that there were a total of 25 players who represented Spain, and 11 of them won a bronze medal. So, P(Spain and Bronze Medal) = 11/100.

Similarly, the total number of players who represented Spain is 25 + 19 + 13 = 57. So, P(Spain) = 57/100.

Now, we can substitute these values into the conditional probability formula to get: P(Bronze Medal | Spain) = (11/100) / (57/100) = 0.244 or 24.4%.

Therefore, the answer is B. 24.4%.

For more similar questions on probability theory.

brainly.com/question/13604758

#SPJ11

A student must analyze data collected from an experiment in which a block of mass 2M traveling with a speed vo collides with a block of mass M that is initially at rest. After the collision, the two blocks stick together. Thus, the correct options are A and B.

The initial momentum of the system = the momentum of block 1 = (2M)vo. The final momentum of the system = the momentum of the combined blocks = (2M + M)uf = 3Muf. Therefore, the correct applications of the equation for the conservation of momentum that represent the initial and final momentum of the system for a completely inelastic collision between the blocks are:

2Mo = 3Muf, because the blocks stick together after the collision. 3Mvo = 3MUf, because the blocks stick together after the collision.

Therefore, the correct options are A and B.

Learn more about Momentum here:

https://brainly.com/question/30677308

#SPJ11

Here are some ideas for setting up the barber's salon based on the size of the space and the products available: The wooden chair should be positioned in the middle of the space, facing a wall.

The barber's workspace will be this. The room's other three walls should be covered with the three enormous mirrors. This will give the impression that there is more space present and enlarge the room. The mirrors should be angled to reflect both the client in the chair and the barber's work area. Over the chair, suspend the lightbulb from the ceiling. The barber salon will be able to operate in enough lighting thanks to this.The wooden chair should be positioned in the middle of the space,  The barber can set up a white sheet or a reflecting surface to improve illumination even further.

learn more about  salon  here:

https://brainly.com/question/15582651

#SPJ

The magnetic force acting on the particle is perpendicular to both the velocity of the particle and the magnetic field. Therefore, the force is in the z direction.

The magnetic force is acting in the direction of the z-axis. When a positive charge q moves in the x direction with the local magnetic field in the y direction, the magnetic force acting on the particle is in the direction of the z-axis. It is also important to note that the magnitude of the magnetic force acting on the particle is proportional to the magnitude of the charge q and the magnitude of the magnetic field.

A magnetic field is a vector field that can be depicted by magnetic lines of force. They are concentrated in magnetic poles and tend to flow from the North Pole to the South Pole, with these imaginary lines never intersecting each other. Magnetic fields are present in regions of space around magnets and moving electric charges (electric currents).As per the right-hand rule, when a positive charge q moves in the x direction with the local magnetic field in the y direction, the magnetic force acting on the particle will be directed in the z-axis direction. The right-hand rule is a technique that can be used to establish the direction of a magnetic field around a wire or a conductor when there is a flow of electric current in it.

Read more about force :

https://brainly.com/question/12785175

#SPJ11

To determine each property in the three bins, certain items must be measured. The luminosity, surface temperature, and mass are the three important properties of the stars represented by three bins.

The measurement for each property is as follows:

For luminosity: To measure luminosity, we must measure the total amount of energy a star emits in all wavelengths.

For surface temperature: Surface temperature is determined by analyzing the spectrum of light emitted by the star.

The spectrum shows a rainbow of colors, and some colors will be more intense than others. These colors can be used to estimate the temperature of the star's surface.

For mass: Mass is calculated using observations of how the star interacts with its surroundings. Astronomers observe the gravitational effect that a star has on other objects around it. The mass of a star can be estimated using this method.

Stars are gigantic balls of burning gas that light up the sky and heat up planets around them. The sun is a star, for example.

Some stars are smaller and some are larger, but all of them share the same basic structure. The enormous nuclear furnace at the center of every star produces heat and light through fusion.

Stars are made up of mostly hydrogen and helium, but they contain small amounts of other elements. They are classified into three categories based on their luminosity, surface temperature, and mass.

To learn more about stars:https://brainly.com/question/13018254

#SPJ11

The temperature of the unsaturated parcel of air when it reaches the surface will be higher than -5°C. As the parcel descends, it will expand, which increases the air's internal energy and causes the temperature to rise. The amount of temperature rise depends on the rate of descent, which is determined by the parcel's buoyancy and surrounding air density.

In general, the temperature increase of an unsaturated parcel of air is approximately 0.65°C per 100 m of descent. For a parcel descending from 3000 m elevation to the surface, the temperature increase will be approximately 19.5°C (0.65°C/100 m * 3000 m). Therefore, the temperature of the unsaturated parcel of air when it reaches the surface will be approximately 14.5°C (19.5°C + -5°C).

The temperature of the unsaturated parcel of air when it reaches the surface after descending from an elevation of 3000 meters is +11°C.

What is the unsaturated parcel of air?

In meteorology, an unsaturated parcel of air refers to a parcel of air that has a relative humidity that is less than 100 percent. If the temperature of the unsaturated parcel of air is lower than the dew point temperature, the relative humidity of the parcel of air is decreased as the temperature of the air rises. In this case, since the parcel is unsaturated, we can make the assumption that the lapse rate is dry and equal to 10°C/km or 1°C/100 meters. Calculating the temperature of the unsaturated parcel when it reaches the surface can use the dry adiabatic lapse rate to determine the temperature of the unsaturated parcel of air when it reaches the surface. Since the lapse rate is dry and the parcel is unsaturated, the dry adiabatic lapse rate is used in the calculation. The formula used in this calculation is: T = T_0 + (dry adiabatic lapse rate × altitude)where T = temperature, T_0 = initial temperature, and altitude = elevation temperature of the unsaturated parcel of air at an elevation of 3000 meters is -5°C. Using the dry adiabatic lapse rate of 1°C/100 meters, we get: Altitude = 3000 meters Dry adiabatic lapse rate = 1°C/100 metersInitial temperature (T_0) = -5°CT = -5°C + (1°C/100 meters × 3000 meters)T = -5°C + 30°CT = 25°CAfter descending to the surface, the temperature of the unsaturated parcel of air is +11°C, according to the above calculation.

For more information follow the link: https://brainly.com/question/11464844

#SPJ11

The absolute temperature is determined by the Kelvin scale, which is the sum of the Celsius temperature and 273.15.

A temperature scale is a system used to measure and quantify the degree of hotness or coldness of an object or substance. It defines a set of numerical values that correspond to specific temperatures, which can be used to compare temperatures and measure changes in temperature over time.

To open the experiment file containing your pressure-temperature data, first launch the Logger Pro software. From there, you can access your file and adjust the graph's axes accordingly. If the data appears to follow a linear relationship, then fit a line to the data by clicking on the Linear Fit option from the Analyze menu. If the data does not appear to follow a linear relationship, take the necessary steps to adjust the graph and obtain a linear relationship.

It is not correct to state that the pressure is proportional to the Celsius temperature. Pressure increases as temperature increases, but it is not a linear relationship. To find the temperature at which the pressure of a gas should drop to zero, you can either manipulate the graph or use the equation to determine the Celsius temperature. Once you have obtained the temperature, compare it to the accepted value for this temperature.

The pressure of a gas is proportional to the absolute temperature of a gas. The absolute temperature is determined by the Kelvin scale, which is the sum of the Celsius temperature and 273.15.

To learn more about the temperature scale follow

https://brainly.com/question/14035602

#SPJ11

We can see the moons should be ranked in the following order from oldest to youngest:

A moon is a natural satellite that orbits a planet. Moons are typically much smaller than their parent planets and are held in orbit by the planet's gravity. They come in a variety of sizes and shapes, and can be composed of a wide range of materials, such as rock, ice, or a mixture of both.

Moons play an important role in our solar system. They help stabilize the orbits of planets, contribute to tidal forces, and may even play a role in the formation and evolution of planets themselves.

Learn more about moon on https://brainly.com/question/12676209

#SPJ1

Answer:

8.04 seconds

Explanation:

Assuming that the child starts from rest at the bottom of the hill and travels until she comes to a stop, we can use the following kinematic equation:

v_f^2 = v_i^2 + 2ad

where v_f is the final velocity (which is zero since the child comes to a stop), v_i is the initial velocity (which is the velocity at the bottom of the hill), a is the acceleration (-0.392 m/s²), and d is the distance traveled.

We can solve for d:

d = (v_f^2 - v_i^2) / (2a)

= (0 - v_i^2) / (2-0.392)

= v_i^2 / 0.784

Since the child is sliding along flat snow-covered ground, there is no change in elevation, so we can use the distance traveled from the bottom of the hill to the stopping point as the distance d.

To find the time it takes for the child to travel this distance, we can use the following kinematic equation:

d = v_it + 0.5a*t^2

where t is the time and all other variables are as previously defined.

Substituting the expression for d obtained above, we get:

v_i^2 / 0.784 = v_it + 0.5(-0.392)*t^2

Solving for t, we get:

t = (2 * v_i) / 0.392

We still need to find the value of v_i, the initial velocity of the child at the bottom of the hill. To do so, we can use conservation of energy. The child starts at rest at the top of the hill, so all the initial energy is potential energy. At the bottom of the hill, all the potential energy has been converted to kinetic energy. Assuming no energy is lost to friction, we can equate these two energies:

mgh = 0.5mv_i^2

where m is the mass of the child, g is the acceleration due to gravity (9.8 m/s²), and h is the height of the hill.

Solving for v_i, we get:

v_i = √(2gh)

Substituting this expression for v_i into the expression for t obtained earlier, we get:

t = (2 * √(2gh)) / 0.392

Plugging in the values of g, h, and a, we get:

t = (2 * √(29.820)) / 0.392 = 8.04 seconds

The speed of water at the point with a radius of 0.150 m is 16.97 m/s while the radius of the pipe at the point where the water speed is 2.90 m/s is 0.0682 m.

a) To find the speed of the water at a point of a circular pipe where the radius is 0.150 m if the water is flowing into this pipe at a steady rate of 1.20 m³/s, we'll use the equation;

Q = A₁V₁ = A₂V₂ Where Q = Flow rate (m³/s)A₁ = Cross-sectional area at one point (m²)V₁ = Velocity of water at one point (m/s)A₂ = Cross-sectional area at a second point (m²)V₂ = Velocity of water at the second point (m/s)At one point in the pipe, the radius is 0.150 m.Therefore, the cross-sectional area, A₁ is given by:

A₁ = πr₁² = π (0.150 m)² = 0.0707 m²Given that the water is flowing into the pipe at a steady rate of 1.20 m³/s, we can write;Q = A₁V₁1.20 m³/s = 0.0707 m² V₁V₁ = 1.20/0.0707V₁ = 16.97 m/s.Therefore, the speed of water at the point with a radius of 0.150 m is 16.97 m/s.

b) To find the radius of the pipe at a point where the water speed is 2.90 m/s, we'll use the same equation as in part (a);Q = A₁V₁ = A₂V₂At a second point in the pipe, the water speed is 2.90 m/s.Given that the water completely fills the pipe, we know that the volume flow rate, Q will remain constant at 1.20 m³/s.So, we have:

Q = A₁V₁ = A₂V₂We know that A₁ = πr₁²So, Q = πr₁²V₁Also, we know that A₂ = πr₂²So, Q = πr₂²V₂Since the volume flow rate is constant, we can equate both equations,πr₁²V₁ = πr₂²V₂Dividing both sides of the equation by π, we have;r₁²V₁ = r₂²V₂But we are interested in finding the radius of the pipe at the second point, r₂.So, we can express r₁ in terms of r₂ using the relationship between the cross-sectional areas;

A₁ = A₂r₁² = (A₂/A₁)²r₂²r₁ = r₂ (A₂/A₁)^(1/2).We know that A₁ = πr₁²We can find A₂ using the fact that the water completely fills the pipe;

A₁V₁ = A₂V₂πr₁²V₁ = A₂V₂π(0.150 m)²(16.97 m/s) = A₂(2.90 m/s)A₂ = π(0.150 m)²(16.97 m/s)/(2.90 m/s)A₂ = 0.0707 m²

So,r₂ = r₁(A₂/A₁)^(1/2)r₂ = 0.150 m × (0.0707 m²/π)/(0.0150 m²)^(1/2)r₂ = 0.0682 m. Therefore, the radius of the pipe at the point where the water speed is 2.90 m/s is 0.0682 m.

More on velocity: https://brainly.com/question/6293650

#SPJ11

(a) Yes, an electric field can exert a force on a stationary charged object. A stationary charged object will experience a force in the direction of the electric field due to the Coulombic interaction between the charges.

(b) No, a magnetic field does not exert a force on a stationary charged object. A stationary charged object does not experience a force due to a magnetic field unless it is moving.

(c) Yes, an electric field can exert a force on a moving charged object. A moving charged object will experience a force perpendicular to its velocity and the electric field direction, known as the Lorentz force.

(d) Yes, a magnetic field can exert a force on a moving charged object. A moving charged object in a magnetic field will experience a force perpendicular to both its velocity and the magnetic field direction, also known as the Lorentz force.

(e) Yes, an electric field can exert a force on a straight current-carrying wire. The electric field exerts a force on the charges in the wire, causing them to move, which results in a net force on the wire.

(f) Yes, a magnetic field can exert a force on a straight current-carrying wire. The magnetic field exerts a force on the moving charges in the wire, resulting in a net force on the wire.

(g) Yes, an electric field can exert a force on a beam of moving electrons. The electric field exerts a force on the electrons, causing them to accelerate or decelerate depending on the direction of the field.

(h) Yes, a magnetic field can exert a force on a beam of moving electrons. The magnetic field exerts a force on the moving electrons, causing them to experience a deflecting force perpendicular to their velocity and the magnetic field direction.

To learn more about electric field refer to:

brainly.com/question/15800304

#SPJ4

The period of a satellite, the time it takes for a complete revolution, depends on the satellite's radial distance. Hence, the correct option is a.

A satellite is an object in space that revolves around a planet, a moon, or even another satellite. Satellites, particularly those in the field of technology, enable the gathering of information and communication of information between two locations on Earth. Satellites can also be used for weather forecasting and military surveillance.

A revolution is one complete orbit around a central body for a satellite. The amount of time it takes for a satellite to complete one revolution is known as the satellite's period. As a result, it is clear that the period of a satellite depends on its radial distance. The closer a satellite is to the planet, the shorter its period would be, while the farther away it is, the longer its period would be.

To know more about satellite:

https://brainly.com/question/13266803

#SPJ11

The average density of the neutron star that has a mass of about 1.5Msun and a radius of 10 kilometers rounded off to two significant figures is 5.9 × 10¹⁴ kg/cm³

The average density of a neutron star can be calculated using the following formula;`d = (3M)/(4πr³)`where `d` is the average density of the neutron star, `M` is the mass of the neutron star, and `r` is the radius of the neutron star.Using the given values in the formula, we get;`d = (3 × 1.5 × 1.989 × 10³⁰)/(4π × (10 × 10³)³)` = 5.9 × 10¹⁷ kg/m³To convert kg/m³ to kg/cm³, we can use the following conversion factor;1 m³ = 10⁶ cm³Therefore,1 kg/m³ = 10⁻³ kg/cm³So, the average density of the neutron star in kg/cm³ is;`d = (5.9 × 10¹⁷) × (10⁻³)` = 5.9 × 10¹⁴ kg/cm³Therefore, the average density of the neutron star is 5.9 × 10¹⁴ kg/cm³ (rounded to two significant figures).Answer: 5.9 × 10¹⁴ kg/cm³.

More on density: https://brainly.com/question/15700804

#SPJ11

When an object starts from rest, and it moves in the x direction with a positive velocity, the instantaneous velocity and average velocity are related by the inequality d) "can be larger than, smaller than, or equal to."

The rate at which an object moves in a given direction is known as velocity. It is a vector quantity that has a magnitude and a direction. For example, if an object moves 10 meters to the north in 5 seconds, the velocity is 2 m/s northward.Average velocity and instantaneous velocityInstantaneous velocity is the velocity of an object at a particular instant or point in time. In other words, it's the speed of an object at a specific moment. The average velocity is the total displacement divided by the total time taken for the motion. In other words, it is the total distance covered in a given direction over a specific time period.

The instantaneous velocity and average velocity are related by the inequality that can be larger than, smaller than, or equal to. The instantaneous velocity represents the velocity at a particular moment or point in time, while the average velocity represents the average velocity over a specified time period. The instantaneous velocity and average velocity can be different because the instantaneous velocity is the velocity at a specific moment, whereas the average velocity is the average of all the velocities over a given period of time. Therefore, the instantaneous velocity and average velocity are related by the inequality d) "can be larger than, smaller than, or equal to."

More on velocity: https://brainly.com/question/15721950

#SPJ11