An Ethernet star LAN is implemented using: B. a self-programming switch at the center of the star.
What is a network topology?In Computer technology, a network topology can be defined as the graphical representation of the various networking devices that are used to create and manage a network connection.
What are the types of topology?In Computer networking, there are six (6) main types of network topology and these include the following:
Ring topologyMesh topologyTree topologyHybrid topologyStar topologyBus topologyGenerally speaking, an Ethernet star local area network (LAN) simply refers to a type of network topology in which all of the network devices are directly connected to a common hub (centralized computer) or hub-and-spoke and it can be implemented by using a self-programming switch that is installed at the center of the star.
Read more on topology here: brainly.com/question/17036446
#SPJ1
the slider block moves with a velocity of vb=5ft/s and an acceleration of ab=3ft/s2
The average velocity of the block is 8.660ft/s and the angular acceleration is 3.70rad/s².
What is angular acceleration?Angular acceleration is defined as the standard abbreviation for the temporal rate of change of angular velocity is, which is represented in radians per second per second.
As Given
r B / IC =2sin30 =1ft =1.732ft r B/IC =2cos30
Thus, Omega AB = Overset v B r B/IC = Frac 5 1 = 5 rad/s AB = r B/IC v B
Then, Omega____ AB = r___ A/IC = 5(1.732) = 8.660 ft/sv for the formula: vA A = AB r A/IC =5 (1.732) = 8.660 ft/s
The slot's tangent is the direction of the tangential component.
an A = a B + AB ×r A/B −ω AB2 r A/B 50i+( AB k)=3i+(a A ) t j
((2cos30 I + 2sin30 j)) = 5 2 ((2cos30 I + 2sin30 j)) 50i(a A)tj=(46.30i AB )i+(1.732i AB +25) j
Using the textbf ii components as an equation, 50 = 46.30 - alpha AB alpha AB = -3.70 rad/s 2 = 3.70 rad/s ²
50=46.30-AB where AB is 3.70rad/s ².
Thus, the average velocity of the block is 8.660ft/s and the angular acceleration is 3.70rad/s².
To learn more about angular acceleration, refer to the link below:
https://brainly.com/question/29428475
#SPJ1
a baseball strikes ashley in the head and she is momentarily knocked unconscious. the physical injury, though not serious, is most likely to interfere with ashley's (fill the blank) memory.
Mild soft tissue wounds like muscle pulls (strains), ligament sprains (injuries), cuts, and contusions are among the most frequent baseball injuries.
What a baseball strikes is related to the physical injury?Overuse injuries can result in tendonitis, muscle inflammation, fractures, sprains, strains, cartilage tears, and other conditions. Baseball players may be unable to play in some instances due to these injuries, which can keep them from giving their best effort.
Therefore, Despite the fact that baseball is a non-contact sport, contact with a ball, bat, or another player is what causes the majority of serious injuries.
Learn more about baseball strikes here:
https://brainly.com/question/14838870
#SPJ1
As more lamps are put into a series circuit, the overall current in the power source.
The total current flowing through the power source reduces when more bulbs are added to the circuit.
The total current flowing through the power source reduces when more bulbs are added to the circuit.
When circuit components are connected end to end or head to head, the circuit is said to be in series. The overall resistance in this instance is equal to the entire resistance of the circuit.
Now, for the series circuit, the overall current in the power source falls as we add more bulbs to the circuit.
Because, for example, incandescent lamps have a resistance, adding more lamps in SERIES will result in an increase in the circuit's resistance. Consequently, the lights will dim as less current flows.
To know more about series click here:
https://brainly.com/question/9496279
#SPJ4
Write a statement that calls the recursive method backwardsAlphabet() with parameter startingLetter.
Using eclipse/Java language. This is the code my textbook gives me to complete:
public class RecursiveCalls {
public static void backwardsAlphabet(char currLetter) {
if (currLetter == 'a') {
System.out.println(currLetter);
}
else {
System.out.print(currLetter + " ");
backwardsAlphabet(--currLetter);
}
return;
}
public static void main (String [] args) {
char startingLetter = '-';
startingLetter = 'z';
/* Your solution goes here */
return;
}
}
Recursion refers to the act of calling a function itself. With the use of this strategy, complex problems can be reduced to more manageable, simpler ones. Recursion might be a little challenging to comprehend. The best method to figure out how it works is to experiment with it.
How to write a programme by recursive method ?The process of making a function call itself is known as recursion. With the use of this strategy, complex problems can be reduced to more manageable, simpler ones. Recursion might be a little challenging to comprehend. Experimenting with it is the most effective way to learn how it functions.
public class Recursive Calls {
public static void backwards Alphabet(char currLetter) {
if (currLetter == 'a') {
System.out.println(currLetter);
}
else {
System.out.print(currLetter + " ");
backwards Alphabet(--currLetter);
}
return;
}
public static void main (String [] args) {
char starting Letter = '-';
starting Letter = 'z';
// Your solution goes here
backwards Alphabet(starting Letter);
return;
}
}
To learn more about recursive method refer to :
https://brainly.com/question/24167967
#SPJ4
Write a procedure (FindPrimes) that calculates the prime numbers between 2 and 1000 (inclusive).a. Use the Sieve of Eratosthenes to find all the prime numbers in this range. (lots of info online and pseudocode provided below)b. Display your results using the procedure developed in No 3. c. Simply coding an array with all the primes between 2 and 1000 (inclusive) will result ina zero grade for this portion of the assignment.
The required prime numbers are those that are encircled.
How does the Sieve of Eratosthenes work for finding prime numbers?Utilizing the Sieve of Eratosthenes method is simple.In order to encircle the remaining numbers, we must cancel all multiples of each prime number starting with 2 (including the number 1, which is neither a prime nor a composite).The required prime numbers are those that are surrounded.Finding all primes up to (and possibly including) a given natural n is done using the Sieve of Eratosthenes.This technique allows us to determine whether any natural number less than or equal to is prime or composite when is relatively small.To learn more about Eratosthenes method refer to:
https://brainly.com/question/18271409
#SPJ4
What Is The Count Sequence For The Following Counter If BCD Counter Block Has Asynchronous CLR Input? (A Is MSB & Dis LSB) There Is A 3-In-AND Gate And Three Wire Connections From B, C, & D To The AND Gate.
The number of televisions per capital is calculated by dividing the number of television sets by the total US population. In this case, we divide the 285 million television sets by the population of 298.4 million.
What is use of televisison?This gives a result of 0.9551 televisions per capita. Note that this method (dividing the number by the population) also is used for calculating the per capita of many other things like GDP.
In this case, we divide the 285 million television sets by the population of 298.4 million. This gives a result of 0.9551 televisions per capita.
Therefore, The number of televisions per capital is calculated by dividing the number of television sets by the total US population. In this case, we divide the 285 million television sets by the population of 298.4 million.
Learn more about television on:
brainly.com/question/16925988
#SPJ1
An intersection with a left-turn light, a green arrow, or a delayed green light has.
When incoming traffic is halted and a special left-turn signal, green arrow, or delayed green light allows you to turn left. shows that one side of an intersection has a green light while the oncoming traffic light is still in the red.
A protected left turn is one that is permitted at an intersection with a left-turn signal, a green arrow, or a delayed green light. The right answer is A. when a special left-turn signal, green tick, or delayed green light allows you to make a left turn while oncoming traffic is stopped. shows that a crossroads has a green arrow on one side and a red light on the other.
When a green indicator is pointing downhill steadily, it means that the lane is open for driving. Drivers should get ready to evacuate if they see a continuous YELLOW X signal, which signifies that the lane it is over is about to close to traffic. If there is a steady green arrow, it means you can turn in that direction.
To know more about green arrow click here:
https://brainly.com/question/11302853
#SPJ4
After x(t)=10.Sin(8000xt) signal is sampled at 5 times the Nyquist rate, the signal is quantized at 8 levels with a mid-range quantizer. Then the pulse code modulated (PCM) signal is obtained by coding. The obtained signal information is then transmitted by coding with the Differential Manchester line coding technique. Underline the PCM signal and the encoded signal for one period of the x(t) signal.
The PCM signal: 0110000001010000001010000001010000001010000001010000001010000001011 and the Encoded signal: 1101010010010100100101001001010010010100100101001001010010010100
What is PCM?
In order to represent sampled analogue signals digitally, one technique is pulse-code modulation (PCM). It serves as the industry standard for digital audio in applications such as digital telephony, compact discs, and computers. In a PCM stream, the amplitude of the analogue signal is compressed to the nearest value within a variety of online steps for each regular, uniformly spaced sample. A particular form of PCM called linear pulse-code modulation (LPCM) has linearly uniform quantization levels. In contrast, PCM encodings (such as those using the A-law or -law algorithms) have quantization levels that are dependent on amplitude. PCM is more general term, but it's frequently used to refer to data that has been encoded using LPCM.
To learn more about PCM
https://brainly.com/question/29218637
#SPJ1
Determine an expression for the vorticity of the flow field described by V=−xy3^+y4^j Is the flow irrotational?
This problem can be solved using the pascal principle, which is applied for both pressures and volumes. In this case we use the definition of volumes, which says that the volume displaced fluid on one side of the Pistons should be equal to the volume displaced on the other side of the piston.
What is force?The force exerted at the large piston will be double in magnitude in comparison with the force applied at the smaller piston.
We know, according to the pascal's law,
The pressure applied at any point in the incompressible fluid is equal in magnitude at each and every point.
So,
P = Force/Area
Where P is pressure,
If pressure is same, then we can write,
F₁/A₁ = F₂/A₂
Where,
F₁ is the force applied at the small piston,
A₁ is the area of the smaller piston,
F₂ is the force at the larger piston,
A₂ is the area of the larger piston,
It is also given that, area if the larger piston is two times the area of the smaller piston so,
A₂ = 2A₁
So, putting the values we get,
F₂/F₁ = 2
So, F₂ = 2F₁
It means that the force exerted by the larger piston will be double in magnitude.
Therefore, In this case we use the definition of volumes, which says that the volume displaced fluid on one side of the Pistons should be equal to the volume displaced on the other side of the piston.
To know more about Pascal's Law, visit,
brainly.com/question/4262025
#SPJ1
A healthcare provider chedule 30 minute for each
patient’ viit, but ome viit require extra time. The random
variable i the number of patient treated in an eight-hour day
Each patient's visit is scheduled for half an hour by the healthcare professional. Therefore, a maximum of 8x2=16 patients can be treated during an eight-hour shift.
A doctor sets 30 minutes for each patient, but they may need longer time, and he can see them, whereas for the amount of patients you can see in an eight-hour day, we are effectively urged to figure out the range of the random variable in this question. Thus, eight hours are equivalent to 480 minutes.
Therefore, the most patients he can see is if each appointment is only for 30 minutes. That makes it 16, and from there, he only sees one patient up to a maximum of 16. Therefore, it can take up to eight hours for just one patient. I could also see as many as 16 patients, each for exactly 30 minutes.
To know more about minutes click here:
https://brainly.com/question/28641018
#SPJ4
An idealized velocity field is given by the formula V = 4txi - 2t²yj + 4xzk Is this flow field steady or unsteady? Is it two or three dimensional? At the point (x, y, z) = (-1, 1, 0), compute (a) the acceleration vector and (b) any unit vector normal to the acceleration.
(A) The presence of time t stated in the components causes the flow to be unstable.
(b) Because none of the three velocity components are 0, the flow is three-dimensional.
(c) The acceleration vector is [tex]\frac{dV}{dt} = -4(1 + 4t^2)i - 4t(1 - t^3)j + 0k[/tex].
(d) Any one of the unit vectors normal to the acceleration is k.
What is an acceleration vector?
The velocity change rate is referred to as the average acceleration vector. It is moving in the v-direction of velocity change. As t approaches 0, the average acceleration can only go as far as the instantaneous acceleration.
Solution Explained for (c):
(c) Evaluate, by laborious differentiation, the acceleration vector at
(x, y, z) =(-1, +1, 0).
[tex]\frac{dU}{dt} = \frac{\alpha u}{\alpha t} + u \frac{\alpha u}{\alpha x} + v \frac{\alpha u}{\alpha y} + w \frac{\alpha u}{\alpha z} = 4x + 4tx(4t) - 2t^2y(0) + 4xz(0) = 4x + 16t^2x[/tex]
[tex]\frac{dv}{dt} = \frac{\alpha v}{\alpha t} + u \frac{\alpha v}{\alpha x} + v \frac{\alpha v}{\alpha y} + w \frac{\alpha v}{\alpha z} = 4ty + 4tx(0) - 2t^2y(-2t^2) + 4xz(0) = -4ty + 4t^4y[/tex]
[tex]\frac{dw}{dt} = \frac{\alpha w}{\alpha t} + u \frac{\alpha w}{\alpha x} + v \frac{\alpha w}{\alpha y} + w \frac{\alpha w}{\alpha z} = 0 + 4tx(4z) - 2t^2y(0) + 4xz(4x) = 16txz + 16x^2z[/tex]
or, [tex]\frac{dV}{dt} = (4x + 16t^2x)i + (-4ty + 4t^4y)j + (16txz + 16x^2z)[/tex]
at (x, y, z) = (-1, +1, 0), we obtain [tex]\frac{dV}{dt} = -4(1 + 4t^2)i - 4t(1 - t^3)j + 0k[/tex]
To learn more about an acceleration vector, use the link given
https://brainly.com/question/15046860
#SPJ1
Automatization of tasks increases memory demands.t/f
Automatization of tasks increases memory demands. (False)
What is Automation?Automation describes technological applications that require as little human input as possible. Business process automation (BPA), IT automation, and other personal applications like home automation are all included in this.
Simple automation automates basic, easy-to-complete tasks. At this level of automation, tasks are centralized and streamlined through the use of tools. For example, information is shared through a messaging system rather than existing in isolated silos. The terms "basic automation" refer to techniques like business process management (BPM) and robotic process automation (RPA).
Business processes are managed through process automation to ensure consistency and openness. Dedicated software and business apps are typically used to handle it. Process automation can boost productivity and effectiveness within your company. It can also provide fresh perspectives on business problems and offer solutions.
Learn more about Automation
https://brainly.com/question/27961985
#SPJ4
7.29 lab: course size complete the course class by implementing the coursesize() member function, which returns the total number of students in the course. given classes: class course represents a course, which contains a vector of student objects as a course roster. (type your code in here.) class student represents a classroom student, which has three data members: first name, last name, and gpa. note: for testing purposes, different student values will be used. ex. for the following students:
Using the knowledge in computational language in C++ it is possible to write a code that course size complete the course class by implementing the coursesize() member function, which returns the total number of students in the course.
Writting the code:#include <iostream>
#include <string>
#include "Course.h"
using namespace std;
##########################
int main() {
Course course;
int count;
// Adding the given student course details
course.AddStudent(Student("Henry", "Bendel", 3.6));
course.AddStudent(Student("Johnny", "Min", 2.9));
// Getting total number of students in the course
count = course.CourseSize();
############################
cout << "Course size: " << count << endl;
return 0;
}
See more about C++ at brainly.com/question/12975450
#SPJ1
Exercise 4.1.8: Divisibility Couto Using a while loop, create an algorithm extracts that prints the individual digits of a positive integer For instance, extract54321); would create the output Hint: The X and the operators are going to be very useful in this program. How can you use these to extract the last digt of the given number >> Sandbou My Section Practice Status: Not Submitted & 0 E FILES 418: Divisibility 1 public class Extractbigits 2.1 public static void main(String[] args) extractDigits(2938724): 6 3 public static void extractdigits(int num) 3 4- 5 Brigits 7 9 ( 1 13 14) >
Floating point arithmetic is also prohibited, as is using the modulo operator. Subtraction done repeatedly is an easy way. Here's another intriguing approach.
What is modulo operator?Modulo operator is defined as the signed residue of a division, which results from the division of two numbers. Integer arithmetic on a circle with a fixed set of numbers is the focus of modular arithmetic.
A recursive approach can be used to check for 7th-order divisibility. If and only if a - 2b is divisible by 7, a number of the form 10a + b is divisible by 7. In other words, take away twice the value represented by the last digit from the sum of the digits before it.
Thus, floating point arithmetic is also prohibited, as is using the modulo operator. Subtraction done repeatedly is an easy way. Here's another intriguing approach.
To learn more about modulo operator, refer to the link below:
https://brainly.com/question/13264582
#SPJ1
dye-sensitized solar cells (dsscs) have many advantages over their silicon-based counterparts. click all that are correct:
Dye-sensitized solar cells (dsscs) have many advantages over their silicon-based counterparts. The advantages are:
TransparencyLow cost, and high power conversion efficiencies under cloudy and artificial light conditionsEase of Fabrication.What are Dye-Sensitized Solar Cells (DSSCs)?Si has two purposes in a conventional solar cell: it works as a source of photoelectrons and it creates an electric field to separate the charges and create a current. However, with DSSCs, the majority of the semiconductor is merely employed as a charge transporter, with photoelectrons given by photosensitive dyes.
The benefits of adopting DSSCs are low cost, ease of production, and simple manipulation. They outperform conventional solar cells in greater temperature and dispersed light situations. The efficiency of DSSC conversion for various dyes and metal oxides
The use of a liquid electrolyte, which has thermal stability issues, is the main downside of the DSSC architecture. The electrolyte can freeze at low temperatures, interrupting power production and even causing physical harm.
Learn more about Solar Cells;
https://brainly.com/question/16642746
#SPJ1
How do you tell if a function is a power function?
When a real number, a coefficient, and a variable are multiplied together and raised to a fixed real number, the result is a function with a single term known as a power function.
What is a function?A function in mathematics is an expression, rule, or law that establishes the relationship between two variables (the independent and dependent variables) (the dependent variable). The sciences rely on functions to build physical relationships because mathematics is rife with them.
The earliest known conceptualization of function is attributed to two Persian mathematicians, Al-Biruni and Sharaf al-Din al-Tusi. Functions were initially thought of as the relationship between changing quantities and other variables.
How time affects a planet's position is an example of this. The concept was historically developed at the end of the 17th century with infinitesimal calculus, and until the 19th century, the functions taken into consideration were differentiable (that is, they had a high degree of regularity).
Learn more about functions
https://brainly.com/question/10283950
#SPJ4
Why do many organizations use the hybrid and multi-Cloud approach? It ensures the business is completely dependent on a single provider. It combines the benefits of public and private Cloud providers. It eliminates the dependency on any private Cloud providers. It allows businesses to share control of their data with other businesses. I don't know this yet. please do not guess when answering question, and thanks for helping
The reason that many organizations use the hybrid and multi-Cloud approach is option D: It allows businesses to share control of their data with other businesses.
Why do so many businesses employ a hybrid and multi-cloud strategy?Improved data management efficiency across all resources that operate across multiple platforms and will be managed via cloud orchestration, reducing the overhead of switching from one infrastructure to another to pursue data or resources, is one of the main reasons for adopting a hybrid multi-cloud strategy.
Therefore, in the context of the above question, it is used because, Organizations may orchestrate processes across various applications, coordinate workloads amongst networked computing environments, and exert more control and governance over resources thanks to this.
Learn more about multi-Cloud approach from
https://brainly.com/question/27838627
#SPJ1
Select a benefit of following semantic HTML practices? A. CSS can only be used in conjunction with semantic HTML. B.Semantic HTML is the easiest method of writing HTML. C.Semantic HTML is easy to understand for humans and computers alike. D.Semantic HTML is easy for the data layer to interpret.
Answer: The answer is C
Explanation:
Semantic HTML is easy to understand for humans and computers alike. The correct option is C.
What is Semantic HTML?With semantic HTML, the meaning and intent of the content on a web page are distinctly defined using HTML markup.
You may make it apparent to both people and computers what the content on your page is about by utilizing semantic HTML. This may provide several advantages.
Semantic HTML isn't the only way to build HTML, but it may be used with any sort of markup that supports CSS.
Semantic HTML, however, is commonly regarded as a best practice since it offers a variety of advantages to both developers and consumers. Both people and computers can easily understand semantic HTML.
Thus, the correct option is C.
For more details regarding HTML, visit:
https://brainly.com/question/27799873
#SPJ2
Attackers use intentional RF interference to flood the RF spectrum with enough interference to prevent a device from communicating with the AP. (types of Wireless DoS attacks)
Attackers use intentional RF interference to flood the RF spectrum with enough interference to prevent a device from communicating with the AP is Wireless Dos attackas
What is meant by Wireless DoS attackas?
A denial of service (DoS) attack aims to impair the effective utilization of network resources and interfere with the network's vital services. One of the main dangers to the security of wireless networks is the DoS attack.
A Denial-of-Service (DoS) attack aims to bring down a computer system or network so that its intended users are unable to access it. DoS attacks achieve this by providing the victim an excessive amount of traffic or information that causes a crash.
When an attacker prevents authorized users from accessing computer systems, networks, services, or other information technology (IT) resources, this is known as a denial-of-service (DoS) attack.
To learn more about denial of service refer to :
https://brainly.com/question/14390016
#SPJ4
IT projects fail for all of the following reasons except:
a. Missed deadlines
b. Dissatisfied customers
c. Users' needs that are not met
IT projects fail for all of the following reasons except Lack of proper documentation.
What is project ?
Any activity that is meticulously planned to accomplish a certain objective, whether it is done alone or in a group, and may include research or design, is referred to as a project. A fresh viewpoint sees a project as a series of activities that must be completed in a specific order and under specific financial and other constraints. A projects may be a transient (instead of a stable) social structure (method deals) that is staffed by teams (from inside or across companies) to complete certain objectives within a set period of time.
To know more about project
https://brainly.com/question/29564005
#SPJ1
If a pharmaceutical company wished to design a drug to maintain low blood sugar levels, one approach might be to
A) Design a compound that mimics epinephrine and can bind to the epinephrine receptor.
B) Design a compound that stimulates cAMP production in liver cells.
C) Design a compound to stimulate G protein activity in liver cells.
D) Design a compound that increases phosphodiesterase activity.
E) All of the above are possible approaches.
Create a substance that can mimic adrenaline and bind to the epinephrine receptor in order to sustain low blood sugar levels.
How do I keep my blood sugar low?A healthy diet rich in fruits and vegetables, maintaining a healthy weight, and engaging in regular exercise can all be beneficial. Keep an eye on your blood sugar levels to see what is causing them to rise or fall. Don't skip meals and eat at regular intervals. Injectable glucagon is the best treatment for extremely low blood sugar levels. A glucagon kit is available with a prescription. Create a substance that can mimic adrenaline and bind to the epinephrine receptor in order to maintain low blood sugar levels.Create a substance that can mimic adrenaline and bind to the epinephrine receptor in order to maintain low blood sugar levels.To learn more about Low blood sugar refer to:
https://brainly.com/question/4328994
#SPJ4
Is parallelogram ABCD a rectangle?
Because ABCD is a parallelogram with a single right angle, it is a rectangle.
What kind of parallelogram is ABCD?Rhombus: If all of a parallelogram's sides are equal or congruent, it is a rhombus. One parallel side and two non-parallel sides make up the shape of a trapezium. In the figure above, you can see that ABCD is a parallelogram where AB || CD and AD || BC.
Why don't all parallelograms have rectangular shapes?Rectangles and parallelograms both have equal and parallel opposite sides. The angles of a rectangle, however, are all right angles. Consequently, a parallelogram is a specific type of rectangle. As a result, while not all rectangles are parallelograms, all parallelograms are rectangles.
To know more about parallelogram visit:-
https://brainly.com/question/19187448
#SPJ4
What would the voltmeter read if the radius of each plate were doubled, but their separation was unchanged?.
The radius of each plate were doubled, but their separation was unchanged than the voltmeter would read 120V.
What is voltmeter?Voltmeters allow you to safely measure the voltage or electrical potential difference between two points in a circuit without changing the voltage of that circuit. The ability to measure voltage is critical to the design and maintenance of high technology, but it also has more general and practical applications.
A voltmeter, also known as a voltmeter, is an instrument used to measure the potential difference or voltage between two points in an electrical or electronic circuit. Some voltmeters are designed for use in DC circuits; others are for alternating current (AC) circuits.
Therefore,
If the radius of each plate is doubled but the separation remains unchanged. The capacitance will become,
C = ε₀A/d
Here,
A is the surface area of capacitor.
The area is, A = 4[tex]\pi r^{2}[/tex]
Substitute 2r for r
A = 4[tex]\pi[/tex]([tex]2r^{2}[/tex])
= 16[tex]\pi r^{2}[/tex]
Then, the capacitance becomes,
C = ε₀ 4A/d
= 4 ε₀A/d
The capacitance is inversely proportional to the voltage. It can be concluded by the formula.
Q = CV
V∝ 1/C
Then, the voltmeter shows the reading as,
[tex]V^{f} = \frac{1}{V}[/tex]
Substitute 12.0 V for V
[tex]V^{f} = \frac{1}{4} (120V)[/tex]
= 3V
If the radius becomes twice the capacitor, then the capacitance becomes 4 times. The capacitance is inversely proportional to the voltage. The voltage becomes one fourth the total voltage.
A voltmeter shows the reading of 120V.
To learn more about alternating current, refer;
https://brainly.com/question/14187491
#SPJ4
.
What are three roadway conditions commonly found in rural driving?
The three roadway conditions commonly found in rural driving are narrow multilane roads, gravel roadways, and rough conditioned roads.
What are three roadway conditions commonly found in rural driving?Narrow roads: One vehicle wrecks and multiple-vehicle collisions are both possible outcomes of an accident on a narrow road. Poor vision, which makes it more difficult to see incoming vehicles, is one of the risks associated with driving on a small road.On curvy roadways, high shrubs and blinds leave a small reactionary window. Maintaining the speed limits is the simplest technique to keep your vehicle safe to drive.Gravel roads: They are challenging to drive on in rainy weather because they are prone to rutting, potholes, wash boarding, and water absorption.Rough roads: Running on rough roads can harm the tires, undercarriage, body, etc. Your repair expense could go from hundreds to thousands of dollars depending on your driving style in certain circumstances.It may even be lethal in the worst-case scenarios of driving in these roadway conditions.To learn more about speed limits , refer:
https://brainly.com/question/28488266
#SPJ1
It usually takes ____ for someone in a firm to discover a security compromise in a system, after the evidence shows up in logs or alerts
Select one:
a. Several seconds
b. Several minutes
c. Several hours
d. Several days
e. Several months
This problem can be solved using the pascal principle, which is applied for both pressures and volumes. In this case we use the definition of volumes, which says that the volume displaced fluid on one side of the Pistons should be equal to the volume displaced on the other side of the piston.
What is force?The force exerted at the large piston will be double in magnitude in comparison with the force applied at the smaller piston.
We know, according to the pascal's law,
The pressure applied at any point in the incompressible fluid is equal in magnitude at each and every point.
So,
P = Force/Area
Where P is pressure,
If pressure is same, then we can write,
F₁/A₁ = F₂/A₂
Where,
F₁ is the force applied at the small piston,
A₁ is the area of the smaller piston,
F₂ is the force at the larger piston,
A₂ is the area of the larger piston,
It is also given that, area if the larger piston is two times the area of the smaller piston so,
A₂ = 2A₁
So, putting the values we get,
F₂/F₁ = 2
So, F₂ = 2F₁
It means that the force exerted by the larger piston will be double in magnitude.
Therefore, In this case we use the definition of volumes, which says that the volume displaced fluid on one side of the Pistons should be equal to the volume displaced on the other side of the piston.
To know more about Pascal's Law, visit,
brainly.com/question/4262025
#SPJ1
TRUE/FALSE. miller s, keoleian g (2015) framework for analyzing transformative technologies in life cycle assessment.
False. The methodology for studying transformational technologies in life cycle assessment by Miller and Keoleian (2015).
What does life cycle assessment mean?The possible environmental effects of materials, products, and services throughout the course of a specified life cycle are calculated via life cycle assessment. International building environmental grading systems like Green Star recognize LCA.
Which of the two life cycle analysis types are they?Unit process data and environmental input-output (EIO) data are the two basic categories of LCA data. The system boundaries for the study's unit process level were used to identify the level at which the direct surveys of businesses or factories making the relevant product were conducted.
To know more about life cycle visit;-
https://brainly.com/question/12600270
#SPJ4
this is a heat exchanger problem with only 1 thin-walled pipe. the tube is 2 cm in diameter with a length of 1 meter. fluid a is on the inside of the tube, and fluid b is flowing over the pipe. fluid a is unused oil and enters the pipe at 400 k and exits at a temperature t2, and has velocity of 2 m/s.
A hydraulic oil cooler, for instance, will remove heat from heated oil by utilizing cold water or air. A heat exchanger is a device that transfers heat from one medium to another.
Instead, a swimming pool The pool water is heated using a heat exchanger using hot water from a boiler or solar heated water circuit. Heat is transferred from one medium to another using heat exchangers. These media could be a gas, a liquid, or a mix of the two. The media may be in direct contact or separated from one another by a solid wall to prevent mixing. One typical illustration of a heat exchanger is the radiator in a car, where hot water used for engine cooling transmits heat to air passing through the radiator.
Learn more about engine here-
https://brainly.com/question/27162243
#SPJ4
Technician A says friction converts the rotational motion of the wheel into heat
Technician B says the required braking energy increases more with vehicle weight than speed
Technician A and Technician B says about braking and friction that converts the rotational motion of the wheel. Technician A is correct.
What is friction?When the roller coaster's wheeled cart rises, the gravitational potential energy rises with height and is at its peak at the top of the ride. The potential energy is changed into kinetic energy as the cart descends. At the bottom of the coaster, kinetic energy is greatest.
Friction is provided by the wheels and the air. Because of this, unless it supplied some other energy, the roller coaster could not run indefinitely.
Therefore, Technician A is correct.
To learn more about friction, refer to the link:
https://brainly.com/question/13993995
#SPJ1
Exercise 1.11.6: Right vs. Left Square points Let's Go! Write a program that has Karel place balls in a square formation if Karel is facing North to start, balls should be placed in a square using right turns only (put ball, move, turn right) x4) You should write a function called akekihtsure to accomplish this • If Karel is facing East to start, balls should be placed in a square using left turns only (put ball, move, turn left) x4) You should write a function called skelet Square to accomplish this In both scenarios, Karel should end facing the starting direction Hint You should use a for loop in your solution World: East World Starting World Ending World RUN CODE TEST CASES ASSIGNMENT St. Cantine Status: Not Submitted 1116: Rights Left Square ✓ Check Cade << 1 >> RESUL WORLD
function rightSquare() {
putBall();
for (var i = 0; i < 3; i++) {
move();
putBall();
turnRight();
}
move();
putBall();
}
function leftSquare() {
putBall();
for (var i = 0; i < 3; i++) {
move();
putBall();
turnLeft();
}
move();
putBall();
}
function main() {
if (frontIsClear()) {
rightSquare();
} else {
leftSquare();
}
}
In the main function, the program first checks if Karel is facing a clear space (North or East) using the frontIsClear function.
If Karel is facing a clear space, the rightSquare function is called to create a square using only right turns. Otherwise, the leftSquare function is called to create a square using only left turns.
The rightSquare and leftSquare functions both use a for loop to move Karel and place balls in a square formation.
You can run this code in a Karel world to see the resulting square formation that Karel creates.
To Know More About Programming, Check Out
https://brainly.com/question/11023419
#SPJ1
What is the represent a function?
An ordered set of pairs or a continuous line can both be used to represent a function on a graph.
An example of a function is the line y = 2x, which multiplies an input value by two to get an output value. Use the vertical line test to decide if a graph accurately depicts a function. The graph is a function if a vertical line drawn across it is moved and only ever touches it at one point. The graph is not a function if the vertical line crosses it at more than one location. if a vertical line drawn anywhere on a relation's graph only encounters one point of intersection.
Learn more about output here-
https://brainly.com/question/24179864
#SPJ4
