Explanation:
By definition, an ion is an electrically charged particle produced by either removing electrons from a neutral atom to give a positive ion or adding electrons to a neutral atom to give a negative ion. When an ion is formed, the number of protons does not change.
Answer:
Ions are formed by the addition of electrons to, or the removal of electrons from, neutral atoms or molecules or other ions.
Explanation:
by combination of ions with other particles; or by rupture of a covalent bond between two atoms in such a way that both of the electrons of the bond are left in association with one of the formerly bonded atoms. Examples of these processes include the reaction of a sodium atom with a chlorine atom to form a sodium cation and a chloride anion; the addition of a hydrogen cation to an ammonia molecule to form an ammonium cation; and the dissociation of a water molecule to form a hydrogen cation and a hydroxide anion.
10 advantages of atomic absorption spectrometer over flame photometer
Answer:
(1) It does not suffer from spectral interference, which occurs in flame emission spectroscopy.
(2) By atomic absorption technique, traces of one element can easily be determined in presence of high concentration of other elements.
The technique makes use of the atomic absorption spectrum of a sample in order to assess the concentration of specific analytes within it. It requires standards with known analyte content to establish the relation between the measured absorbance and the analyte concentration and relies therefore on the Beer–Lambert law.
Which functional group does the molecule below have?
A. Ether
B. Amino
C. Carbonyl
D. Hydroxyl
SUBV
Answer:
Ether is the correct answer
Explanation:
It is based.
The mass of an atom of element x is equivalent to the total mass of 7 hydrogen atoms
All of the following are examples of simple tools except:
A.magnifying glass
B.space telescope
C.pulley
D.lever
Answer:
space telescope I assume
Explanation:
all other tools can be made and used very easily but a telescope took years and years to invent
Water can act as both an acid and a base in an ionization reaction to form (H) and OH ions.
What is this phenomenon called?
All living organisms are made of
They are the smallest units of a living.
thing that can perform all life processes.
A. stones
B. cells
C. water drops
D. bricks
a mixture , the different parts of which vary in composition and properties
Answer:
heterogeneous mixture
Explanation:
(a) A mixture with the same composition and properties throughout is called a homogeneous mixture. (b) A mixture, the different parts of which vary in composition and properties, is called a heterogeneous mixture.
illustrate the law of multiple proportions using the formation of SO2 and SO3 by sulphur and oxygen
In SO2 and SO3, oxygen combines with sulphur in a fixed ratio.
The law of multiple proportion states that if two elements combine with each other to form more than one chemical compound, then the various masses of the elements which combine with a fixed mass of the other element are in simple multiple ratios.
To illustrate this law, sulphur forms two oxides, SO2 and SO3. The ratio of the oxygen that combines with a fixed mass of sulphur in the two compounds is 2:3 in accordance to the law of multiple proportion.
https://brainly.com/question/11378529
PLEASE SOLVE THIS QUESTION.
VERY MUCH IMPORTANT
Answer:
[tex]thank \: you[/tex]
22. Which of the following is contained only in a eukaryotic cell? A. cell wall
B. nucleus
C. chromosomes
23.Which of the following terms represent the chemical reactions to break down food into simpler compounds in an organism?
A. anabolism
B. catabolism
C. nitrogen cycle
24.What types of molecules are bonded together to form a nucleotide? A. 2 nitrogen bases + 1 sugar
B. 2 sugars + 1 phosphate group
C. 1 nitrogen base + 1 phosphate group + 1 sugar
25.Glucose and oxygen are the two products of photosynthesis A. true
B. false
26.What is the first step in the refining of petroleum? A. cracking
B. drilling
C. distillation
27.When radium-226 (atomic number 88) decays by emitting an alpha particle, it becomes _________.
A. polonium-222 B. polonium-224 C. radon-222
28.The general name for hydrocarbons with at least one triple covalent bond is _________.
A. alkenes B. alkanes C. alkynes
29.What particle is emitted in alpha radiation? A. electron
B. photon
C. helium nucleus
30.Which type of compound is this? CH3CH2CH2CH2OH
A. alcohol B. aldehyde C. ether
31.Why are the molecules of hydrocarbons nonpolar? A. The intermolecular attractions are strong.
B. All the bonds are single covalent bonds.
C. The electron pair is shared almost equally in all the bonds.
32. An amino group and a carboxyl group are joined by a ___________ bond. A. peptide
B. protein
C. amino
33.What type of radiation is likely to occur when the ratio of protons to neutrons is below the band of stability?
A. alpha decay
B. beta decay
C. neutron emission
34.Covalent bonds are between bases in a DNA base-pair. A. true
B. false
35.What is the name of the functional group in the following compound? R—NH2
A. halogen B. amine C. ether
Answer:
22 options A cell wall
23 options A anabolism
24 options B 2sugar + 1phosphate group
Write differences between reactants and products.
Reactants - The substance which participate in a chemical reaction are called reactants.
[tex] \rm \: Example - H_2 \: , \: O_2[/tex]
Product - The substance which are formed by chemical reaction between the reactants are called product.
[tex]\rm \: Example - H_2 O[/tex]
Explanation:
reactant is a substance that is present at
the start of a chemical reaction.
product is a substance
that is present at the end of a chemical
reaction.
Determine the empirical formula of the compound formed when 1.2g of magnesium reacts with 3.55g of chlorine.Take the molar mass of magnesium and chlorine to be 24g and 35.5g respectively.
Explanation:
For Mg, (1.2 g Mg/24 g Mg) = 0.05 mol Mg.
For Cl, (3.55 g Cl/35.5 g Cl) = 0.1 mol Cl
So the ratio now is
Mg:Cl = 0.05 : 0.1 = 1:2
I got the 1:2 ratio by dividing both by the smallest number, which is 0.05 mol. Therefore, the empirical for formula of the substance is [tex]MgCl_2[/tex]
The empirical formula of the compound formed when magnesium reacts with chlorine is MgCl₂.
To determine the empirical formula of the compound formed when magnesium (Mg) reacts with chlorine (Cl), we need to find the ratio of the elements in terms of moles.
First, we calculate the number of moles of each element:
Moles of Mg = Mass of Mg / Molar mass of Mg
Moles of Mg = 1.2 g / 24 g/mol
Moles of Mg = 0.05 mol
Moles of Cl = Mass of Cl / Molar mass of Cl
Moles of Cl = 3.55 g / 35.5 g/mol
Moles of Cl = 0.1 mol
Next, we determine the simplest whole-number ratio between the moles of Mg and Cl:
Mg:Cl = 0.05 mol : 0.1 mol
To simplify the ratio, we divide both values by the smaller value (0.05 mol in this case):
Mg:Cl = 0.05 mol / 0.05 mol : 0.1 mol / 0.05 mol
Mg:Cl = 1 : 2
Therefore, the empirical formula of the compound formed when magnesium reacts with chlorine is MgCl₂.
Learn more about empirical formula from the link given below.
https://brainly.com/question/32125056
#SPJ2
Describe the differences between models and scientific laws and theories. (
Answer:
Scientific laws and theories have different jobs to do. A scientific law predicts the results of certain initial conditions. ... In simplest terms, a law predicts what happens while a theory proposes why. A theory will never grow up into a law, though the development of one often triggers progress on
Explanation:
Things around you. All around you there is matter. The chair you are sitting on, air and
water are all matter. Almost everything that you see is matter. Anything that has mass
and takes up space is called matter.
What do we call something that has mass and takes up space?
Answer:
Hi Lovelys!!
Answers down below!!
Explanation:
There are two answer my me: Matter and Volume
Matter is anything that has mass and takes up space. Mass gives an object the property of weight and inertia (resistance to change in the motion of an object).
Volume simply refers to the space an object takes up. Depending on the physical state of an object, there are a couple ways to measure volume. If we are trying to measure the volume of a box, for instance, we would multiply the length of the box by its height and by its width.
Hope this helps!! =3
Have a wonderful day, evening, or night!! <3
what is chlorine anyone tell
Answer:
A toxic, green, gaseous chemical element (symbol Cl) with an atomic number of 17.
Can someone help me pls, I do not know how to do this. i am trying to help a friend as well
Answer:
Your answer is 5 x 10⁵
I hope it's helps you
Answer:
[tex]thank \: you[/tex]
A 18.5-mL sample of a glucose IV solution has a mass of 19.1 g. What is the density of the glucose solution ?
Answer: 1.0324(g/ml)
We have the formula [tex]m = Vd[/tex]
Where m is the mass, V is the volume, and d is the density
Divide both sides by V, we get [tex]d=\frac{m}{V}=\frac{19.1}{18.5} = 1.0324 (g/ml)[/tex]
How will a decrease in the concentration of a reactant affect a chemical reaction?
Answer:
When the concentrations of the reactants are raised, the reaction proceeds more quickly. ... When solids and liquids react, increasing the surface area of the solid will increase the reaction rate. A decrease in particle size causes an increase in the .
write any two effect of gravity
How does convection affect the earths atmosphere
Answer:
I think the layers of the atmosphere does temperature increase with increasing height. It is affected by convection because it heats the lower atmosphere. It is affected by conduction because the is the transfer of thermal energy. I guess
Hope this help!
which is the best interpretation of the two flat portions of the graph
A. These show where kinetic energy is increased
B. These show where temperature is at 0 Celsius
C. These show where thermal energy does not exist
D. These show were changes of state are occurring
Answer:
b
Explanation:
Name the reaction & mechanism of the following reactions:
Answer:
double displacement reaction
Answer:
DECOMPOSITION REACTIONDOUBLE DISPLACEMENT REACTIONDISPLACEMENT REACTIONExplanation:
SEE THE IMAGE FOR SOLUTION
HOPE IT HELPS
HAVE A GREAT DAY
convert 6.86 km into m
Hi there!
1 km=1000m
so
6.86 km = 6.86×1000= 6860 m
have a nice day
#YoghurtCup!
Isotopes have
Question 3 options:
A)
a different number of neutrons in their nuclei.
B)
a different number of protons in their nuclei.
C)
a different number of electrons.
D)
different numbers of both protons and neutrons in their nuclei.
Answer:
a different number of neutrons in their nuclei.
Explanation:
Part A
In the year 2012, an estimated amount of 31.6 billion metric tons (1 metric ton = 1000 kg) of carbon dioxide (CO2) was emitted worldwide due to fossil fuel combustion
and cement production. Express this mass of CO2 in grams without exponential notation, using an appropriate metric prefix
The mass of CO₂ in grams without exponential notation and with the appropriate metric prefix is 31.6 Eg.
First, let's calculate the amount of mass in grams of 31.6 billion metric tons.
Knowing that 1 metric ton is equal to 1000 kg, 31.6 billion metric tons is:
[tex]m = \frac{1000 kg}{1 \: metric \: ton}*\frac{1000 g}{1 kg}*31.6 \cdot 10^{12} \: metric \: ton = 3.16 \cdot 10^{19} g[/tex]
The metric prefix that is close to the above result is exa (E), which is equal to 10¹⁸.
Therefore, the mass of CO₂ in grams without exponential notation and with the appropriate metric prefix is 31.6 Eg (exa-gram).
To learn more about metric prefixes go here: https://brainly.com/question/20712978?referrer=searchResults
I hope it helps you!
How does the mass of each atom compare to the average atomic mass of the element give in the periodic table?
Explanation:
One is the average weight of an element and the other is the total number of nucleons in the atom's nucleus. Atomic mass is also known as atomic weight. Atomic mass is the weighted average mass of an atom of an element based on the relative natural abundance of that element's isotopes please mark as a brainliest
9. Hydrogen is 99% H, 0.8% ?H, and 0.2% H. Calculate its average atomic mass.
Answer: Technically, this cannot be answered, since none of the H atoms have a mass number assigned. With the assumption noted delow, I calculate 1.012 as the average atomic mass.
Explanation:
My answer is based on assumed masses for the three H isotopes:
1H : 1 AMU
2H: 2 AMU Deuterium
3H: 3AMU Tritium
AMU Rel Abund. Wt. Avg
1H 1 99.00% 0.99
2H 2 0.80% 0.016
3H 3 0.20% 0.006
Sum 1.012
Write the molecular formula of ferric oxide and calcium hydroxide by criss-cross method
[tex]\setlength{\unitlength}{1cm}\begin{picture}(0,0)\thicklines\put(0,3){\bf Fe}\put(0,0){\bf -3}\put(4,3){\sf O}\put(4,0){\bf -2}\put(0.2,2.9){\vector(4,-3){3.5}}\put(3.8,2.9){\vector(-4,-3){3.5}}\end{picture}[/tex]
[tex]\\ \sf\longmapsto Fe_2O_3[/tex]
Calcium Hydroxide:-[tex]\setlength{\unitlength}{1cm}\begin{picture}(0,0)\thicklines\put(0,3){\bf Ca}\put(0,0){\bf 2}\put(4,3){\sf OH}\put(4,0){\bf -1}\put(0.2,2.9){\vector(4,-3){3.5}}\put(3.8,2.9){\vector(-4,-3){3.5}}\end{picture}[/tex]
[tex]\\ \sf\longmapsto Ca(OH)_2[/tex]
Note:-
View the answer from web at brainly.com for complete understanding.
draw a diagram to show what happened to the particle, when a liquid cools to a solid?
And do follow if you appreciate it
Diagram 1 shows the species of carnivore animal. (tiger)
What is the use of canine teeth for the animal?
a. Tear food
b. grind food
c. cut food
d. chewing and crushing food
Answer:
a no. because tearing the raw meat will not be easy without the use of the canine teeth
