an object in shm oscillates with a period of 4.0 s and an amplitude of 16 cm. part a how long does the object take to move from x

Answers

Answer 1

The object takes to move is 0.409s.

Calculaiton:

time period T = 4 s

Angular speed ω = 2π/T= 1.57 rad/s

SHM equation

x = A sin ωt

6 = 10 sin(1.57t)

sin(1.57t) = 0.6

1.57 t = 0.6435

t= 0.409s.

The amplitude of a periodic variable is a measure of its change over one period. The amplitude of an aperiodic signal is its magnitude relative to a reference value. Amplitude has various definitions, all of which are functions of the magnitude of the difference between extreme values ​​of a variable. It refers to the maximum displacement from equilibrium exhibited by a body in periodic motion.

Learn more about The amplitude here:- https://brainly.com/question/3613222

#SPJ4


Related Questions

Maher is trying to find the density of a plastic toy. The toy’s mass is 160 g.
Maher placed the toy in a graduated cylinder that has 70 ml of water, the water level increased
till 150 ml.
a) Find the toy’s volume.

Answers

The volume of the toy is 80 ml.

To find the volume of the plastic toy, Maher can use the principle of buoyancy. When an object is placed in a fluid, it will displace an amount of fluid equal to its own volume. The volume of the displaced fluid can be measured and used to calculate the volume of the object.

In this case, Maher has placed the toy in a graduated cylinder filled with water, and he has observed that the water level increased from 70 ml to 150 ml. This means that the toy displaced 150 - 70 = 80 ml of water.

The volume of the toy is equal to the volume of the displaced water, so the toy's volume is 80 ml. This is the volume of the toy when it is completely submerged in water.

It's important to note that the volume of an object can change depending on its temperature, pressure, and other factors. To get an accurate measurement of the volume of the toy, Maher should make sure to measure the volume of the displaced water carefully and under controlled conditions.

Answer:

Volume of the toy: [tex]80\; {\rm mL}[/tex].

Average density of the toy: [tex]2\; {\rm g\cdot mL^{-1}}[/tex] (or equivalently, [tex]2\; {\rm g \cdot cm^{-3}}[/tex].)

Explanation:

The graduated cylinder initially measures the volume of water in this cylinder:

[tex]V(\text{water}) = 70\; {\rm mL}[/tex].

Assume that the toy is submerged in the water. The graduated cylinder would then measure the volume of the water and the toy, combined:

[tex]V(\text{water}) + V(\text{toy}) = 150\; {\rm mL}[/tex].

Rearrange to find the volume of the toy:

[tex]\begin{aligned}V(\text{toy}) &= 150\; {\rm mL} - V(\text{water}) \\ &= 150\; {\rm mL} - 70\; {\rm mL} \\ &= 80\; {\rm mL}\end{aligned}[/tex].

To find the average density of this toy, divide mass by volume:

[tex]\begin{aligned}(\text{average density}) &= \frac{(\text{mass})}{(\text{volume})} \\ &= \frac{160\; {\rm g}}{80\; {\rm mL}} \\ &= 2\; {\rm g\cdot mL^{-1}}\end{aligned}[/tex].

A physics student walks 6 meters east, 4 meters north, then 9 meters
west. What is the student's magnitude of displacement from starting
position?

Answers

Answer:

5 m

Explanation:

Displacement is the straight-line distance from the starting point to the end point.  Student ends up 4m north and 3m west from where he started. Use pythagorean theorem to solve for displacement (d).  

d² = 3² + 4² = 25

d = [tex]\sqrt{25}[/tex] = 5 m

Or, if you remember from geometry, a right triangle with legs of 3 and 4 has a hypotenuse of 5 (3-4-5 right triangle)

it’s actually 7th grade science no physics pls answer it’s a lot of points

What do the historical communication technologies in these photos have in common?
(pictures are shown below)

Answers

All the tools of communication such as the drum, telegraph et cetra were used for emergency communication.

What is communication?

We know that communication has to do with the art of sending and receiving information between two people who may or may not be at the same place. We know that the dissemination of information is a very important aspect of life and we have always tried to invent means of communication especially at times when we have an emergency situation that needs a kind of an immediate remedy.

We can see that all the kinds of communication gadgets that have been show here are all from a period that is far behind the kind of civilization that we have to day and the kind of thge communication gadgets that are quite available to the people that are around today.

However, all the tools shown could be used to send information in times of emergency.

Learn more about communication:https://brainly.com/question/14288895

#SPJ1

the force between between two objects increases by what factor if the distance between them is changed 4.5 times the original separation?

Answers

The new gravitational force between the object will be 1/20.25 times of the original force.

The gravitational force between any two object is defined as the product of the masses of the object and it is inversely proportional to the square of the distance between them which is given by,

F = GMm/R²

Here,

G is the universal gravitational constant, M and m are the mass of the body and R is the distance between them.

As per the given question the distance between the object is increased 4.5 times the original separation.

R' = 4.5R.

The new force of attraction between the object will be,

F' = GMm/(R')²

F' = GMm/(4.5R)²

F' = GMm/20.25R²

F' = F/20.25

So, the new force of attraction between the two objects will become 1/20.25 times of original force.

To know more about gravitational force , visit,

https://brainly.com/question/24783651

#SPJ4

7. What is the weight of a ball with a mass of 0.77 kg? (hint: how fast is gravity?)

Answers

Answer:

While on the earth, any object with a mass of 0.77 kg weighs 7.546 newtons (1.698 pounds).

On the moon, the same 0.77-kg object would weigh 1.232 newtons (0.277 pound)

Explanation:

a point at an antinode of the standing wave on the wire travels from its maximum upward displacement to its maximum downward displacement in 8.40 msms . what is the wire'??s mass?

Answers

The relation between the time-period of the transverse wave for the third harmonic and the time between the maximum displacement and minimum displacement is [tex]=16.3 \mathrm{~g}[/tex]

[tex]$$T_3=2 t$$Substitute$8.40 \mathrm{~ms}$[/tex]

for t in the above expression.

[tex]$$T_3=2(8.4 \mathrm{~ms})\left(\frac{10^{-3} \mathrm{~s}}{1 \mathrm{~ms}}\right)$$[/tex]

The wave velocity can be given by the following expression [tex]=0.0168 \mathrm{~s}[/tex]

[tex]v=\frac{\lambda_3}{T_3}[/tex]

Here,

[tex]$$\lambda_3$$[/tex]

is the frequency of third harmonics and

[tex]$$T_3$$[/tex]

is the time-period of third harmonics.

Substitute [tex]$0.1296 \mathrm{~m}$[/tex] for

[tex]$$\lambda_3$$[/tex]

and

[tex]$0.0168 \mathrm{~s}$ for$T_3$[/tex]

[tex]\begin{aligned}& v=\frac{0.1296 \mathrm{~m}}{0.0168 \mathrm{~m}} \\& =7.714 \mathrm{~m} / \mathrm{s}\end{aligned}[/tex]

The expression of the wave velocity is given by the following expression.

[tex]v=\sqrt{\frac{T}{m / L}}[/tex]

Rearrange the above expression for

[tex]$$m$$[/tex]

[tex]\text { Substitute } 5.00 \mathrm{~N} \text { for } T, 0.1944 \mathrm{~m} \text { for } L \text {, and } 7.714 \mathrm{~m} / \mathrm{s} \text { for } v \text { in the above expression. }[/tex]

[tex]\begin{gathered}m=\frac{(5.00 \mathrm{~N})(0.1944 \mathrm{~m})}{(7.714 \mathrm{~m} / \mathrm{s})^2} \\=(0.0163345 \mathrm{~kg})\left(\frac{1000 \mathrm{~g}}{1 \mathrm{~kg}}\right) \\=16.3 \mathrm{~g}\end{gathered}[/tex]

The anti-nodes in the standing waves are at a distance half a wavelength. The time-period is twice the time from maximum displacement to minimum displacement of the anti-node.

To learn more about displacement visit

https://brainly.com/question/11934397

#SPJ4

one cannot peer all the way back and directly observe the big bang because the universe's density was so low. true false

Answers

True. The Big Bang Theory is the current scientific explanation for the origin and evolution of the universe. According to this theory, the universe was initially in a state of extremely high density and temperature, and it has been expanding and cooling since its inception.

One reason we cannot directly observe the Big Bang is that the universe's density was so low at that time that there were no solid particles, such as atoms or molecules, that could have formed into stars or galaxies. Instead, the universe was filled with a hot, ionized plasma that was too diffuse to be observed by telescopes. Another reason is that the expansion of the universe has caused the light and other electromagnetic radiation that was emitted during the Big Bang to become redshifted, or stretched out in wavelength, over time. This means that the light from the earliest moments of the universe has shifted into the microwave and radio frequency ranges, which are not visible to the human eye. Therefore, while we can infer some details about the conditions of the early universe based on observations of the cosmic microwave background radiation and the large-scale structure of the universe, we cannot directly observe the Big Bang itself.

To know more about redshift

https://brainly.com/question/13494718

#SPJ4

a 40cm diameter wheel accelerates uniformly from 240 rpm to 360 rpm in 6.5 seconds. how far will a point on the edge of the wheel have traveled in this time

Answers

Answer:

S = V1 t + 1/2 a t^2        distance traveled for linear acceleration

θ = ω1 t + 1/2 α t^2       equivalent angle for rotational acceleration

ω1 = 240 / min * 2 π * 240 / (60 s/min) = 8 π / s

ω2 = 360 rpm = 12 π / s

α = 4 π/ 6.5 s^2  = .62 π / s^2    angular acceleration

θ = 8 π / s  6.5 s + .62 π / 2 * 6.5^2

θ = 52 π + 13 π = 65 π = 65 * π / (2 π / rev) = 32.5 rev

1 rev = 2 * π * R = 2 * π * .4 m = 2.51 m / rev

S = 32.5 rev * 2.5 m/rev =  81 m

an increase in sound level from 30 db to 50 db requires an increase in sound intensity by a factor of:

Answers

Loudness increases by 10 dB for every dB increase in sound intensity. A 40-decibel light rainstorm is 100 times louder than a whisper, whereas a 30-decibel "silent" room is 10 times louder than a 20-decibel whisper. Loud noises can be harmful.

50 dB is how much louder than 20 dB?

A 10 dB rise results in a two-fold increase in volume. The loudness will therefore rise by nearly 8 times with a 30 dB increase (from 20 dB to 50 dB).

Decibels are measured on a logarithmic scale using a power of ten, which might be perplexing. For those of you without advanced math degrees, this simply implies that the sound intensity doubles for every 10 decibel rise.

learn more about Decibels refer

https://brainly.com/question/28375244

#SPJ4

I NEED HELP ASAP PLSS

Answers

Answer:

C.) The United States would become less dependent on energies that emit greenhouse gases.

Explanation:

If nuclear energy increased, it would occupy a larger piece of the pie chart.  The prompt states that the usage of non-fossil fuel-based forms of energy would remain constant.  This condition means that nuclear energy would decrease the percentage of fossil fuel-based energy used.  Energy production through the use of fossil fuels necessarily produces greenhouse gases such as CO2.  An increase in nuclear energy would mean a corresponding decrease in dependence on greenhouse gas-producing fossil fuels.

Question 8 of 20
You heat a pot of water on a gas stove. Not all the energy from the
combustion of the gas is transformed into thermal energy. What happens to
the rest of the energy released when the gas burns?
OA. It is transformed into light energy.
OB. It is transformed into chemical energy.
C. It is transformed into electrical energy.
OD. It is transformed into nuclear energy.
SUBMIT

Answers

Answer:

None of the choices you provided are correct. When a gas burns, it releases energy in the form of heat and light. Some of this energy is transferred to the pot of water, increasing its temperature, but some of the energy is also released as light. However, the rest of the energy is not transformed into chemical, electrical, or nuclear energy. Instead, it is lost to the environment in the form of waste heat. This is why gas stoves can become hot to the touch - they are releasing excess energy in the form of heat that is not being used to heat the pot of water.

Explanation:

when you looked at solar activity on the heliophysics event registry website, on which date did you find activity on the sun?

Answers

You did look at solar activity on the heliophysics event registry website, and we found activity on the sun on the specified day.

What three sorts of solar occurrences are there?

Any natural occurrence in the upper atmosphere of the sun is referred to as a solar phenomenon. Solar flares, prominences and filaments, and coronal mass ejections are three different categories of solar phenomena.

How can I follow the cycle of solar activity the best?

The simplest way we can investigate how solar activity changes over time is to survey sunspots, which is also how we track the solar cycle. Sunspots are associated with the Sun's natural 11-year cycle, during which the planet's surface changes from calm to turbulent.

To know more about  solar activity visit:-

https://brainly.com/question/3013261

#SPJ4

Uing two billiard ball and 3 to 4 entence decided experiment to demontrate the law of conervation of momentum. (4 point)

Answers

So let's talk about billiard balls and the law of conservation of momentum. For the purposes of this simplified discussion, momentum is always conserved for collisions between balls.

What is momentum?Momentum is a commonly used term in sports. A team that has the momentum is on the move and is going to take some effort to stop. A team that has a lot of momentum is really on the move and is going to be hard to stop. Momentum is a physics term; it refers to the quantity of motion that an object has. A sports team that is on the move has the momentum. If an object is in motion (on the move) then it has momentum.Momentum can be defined as "mass in motion." All objects have mass; so if an object is moving, then it has momentum - it has its mass in motion. The amount of momentum that an object has is dependent upon two variables: how much stuff is moving and how fast the stuff is moving. Momentum depends upon the variables mass and velocity. In terms of an equation, the momentum of an object is equal to the mass of the object times the velocity of the object.

To learn more about velocity refer to:

https://brainly.com/question/25749514

#SPJ4

disregarding friction, how far will the cart move in 3.2 s, starting from rest? answer in units of m.

Answers

If the cart moves in 3.2 seconds from rest, then the distance traveled by cart is 2 meters.

Which definition of distance suits you best?

How do you define distance? Regardless of direction, distance measures an object's overall movement. Distance is defined as the amount of ground covered by an object, regardless of its starting or stopping position.

Horizontal force acting on the cart, F = 11 N

Mass of the cart, m = 35 kg

To find,

Distance covered by the cart in 3.5 seconds if it starts from rest.

Solution,

Let x is the distance moved by the cart. It can be calculated using the second equation of motion as :

s = 1.925 meters

What is the definition of a distance?

In terms of "how much land an object is covered" while traveling, distance—a scalar quantity—describes this. Displacement is a vector number that expresses the overall change in the object's location, and it is related to the phrase "how far from place the thing is."

To know more about distance  visit:

https://brainly.com/question/15172156

#SPJ4

what force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2500 kg car (a big car) resting on the slave cylinder? the master cylinder has a 1.93 cm diameter, while the slave's is 24.9 cm. 1900 n 150 n 15 n 4.1e 06 n 74 n

Answers

The force that must be exerted on the master cylinder of the hydraulic lift to support the weight of car is  147.2 N .

The Pascal's Law states that the relation between the pressure , force and area is given as :

Pressure = Force/Area ;

given that the diameter of the master cylinder is = 1.93 cm ;

so radius of master cylinder = 1.93/2 = 0.965 cm = 0.00965 m ;

the diameter of slave cylinder is = 24.9 cm ;

the radius of the slave cylinder = 24.9/2 = 12.45 m = 0.1245 m ;

Area of slave cylinder (A₁)= π(0.1245)² = 0.0486 m²

Area of the master cylinder (A₂) =  π(0.00965)² = 0.000292 m² ;

given mass of the car = 2500 Kg ,

the force exerted will be : F = m*a

F₁ = 2500*9.8 = 24500 N ;

F₁/A₁ = F₂/A₂

So , 24500/0.0486 = F₂/0.000292

F₂ = (24500/0.0486)×0.000292

F₂ = 147.2 N

Therefore , the force exerted on the master cylinder is 147.2 N  .

Learn more about Force here

https://brainly.com/question/14114564

#SPJ4

a vertical spring scale can measure weights up to 210 n . the scale extends by an amount of 13.5 cm from its equilibrium position at 0 n to the 210 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.15 hz . part a ignoring the mass of the spring, what is the mass m of the fish?

Answers

sheesh sheesh                                                    

Explanation:

Classify the type of reaction below.
C2H6 + O2
--> CO2 + H2O
a. Synthesis
b. Decomposition
c. Combustion
d. Single Replacement
e. Double Replacement

Answers

Answer: Synthesis

Explanation: You are combining multiple Elements

a constriction in a pipe reduces its diameter from 4.0 cm to 2.0 cm. where the pipe is narrow the water speed is 8.0 m/s. where it is wide the water speed is:

Answers

The velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.

How to find velocity ?

To find the velocity of the water where the pipe is narrow, you can use the formula for the mass flow rate, which is given by:

Mass flow rate = Density * Flow rate

= Density * (Area * Velocity)

Where:

Density is the density of the fluid

Flow rate is the volume flow rate, or the rate at which volume flows through the pipe

Area is the cross-sectional area of the pipe

Velocity is the velocity of the fluid

The mass flow rate is constant, so you can set the mass flow rate on either side of the constriction equal to each other and solve for the velocity on the other side.

The cross-sectional area of the pipe on the narrow side is given by the formula for the area of a circle:

A = pi * r^2

Where:

A is the cross-sectional area of the pipe

r is the radius of the pipe

The radius of the pipe on the narrow side is 3 cm / 2 = 1.5 cm. Plugging this value into the formula for the cross-sectional area, you get:

A = pi * (1.5 cm)^2

= 7.07 cm^2

The cross-sectional area of the pipe on the wide side is given by the same formula, with a radius of 6 cm / 2 = 3 cm:

A = pi * (3 cm)^2

= 28.27 cm^2

Since the mass flow rate is constant, you can set the mass flow rates on either side of the constriction equal to each other and solve for the velocity on the other side:

(Density * 7.07 cm^2 * v) = (Density * 28.27 cm^2 * 8 m/s)

Solving for v, the velocity on the narrow side, you get:

v = (Density * 28.27 cm^2 * 8 m/s) / (Density * 7.07 cm^2)

= 11.6 m/s

The final value for the velocity on the narrow side is 11.6 m/s. This is the velocity of the water in the narrow part of the pipe.

To learn more about mass flow rate refer :

https://brainly.com/question/13289839

#SPJ4

a dad pushes tangentially on a small hand-driven merry-go-round and is able to accelerate it from rest to a frequency of 15 rpm in 10.0 s. assume the merry-go-round is a uniform disk of radius 2.5 m and has a mass of 330 kg, and two children (each with a mass of 25 kg) sit opposite each other on the edge. calculate the torque required to produce the acceleration, neglecting frictional torque. what force is required at the edge?

Answers

Refer to the photo taken.

1. A car moving 11 m/s accelerates at 1.5 m/s². How fast is it moving after it accelerates for 50
seconds?
Type a response (show work please)

Answers

We may be aware that, for example, a car leaving a stop sign would move farther in a given amount of time the faster it accelerates.

what an acceleration is?

acceleration is the rate of change in both speed of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. So because direction is always shifting, motion on a circle accelerates even while the speed is constant.

What prompts accelerating?

An object's velocity is altered by a net force, and acceleration increases with net force. To accelerate at the same rate as less massive objects, more massive objects need greater net forces.

To know more about acceleration visit:

https://brainly.com/question/2303856

#SPJ1

1. a 1.4 x 103 kg car is westbound at a velocity of 37.0 km/h when it collides with a 2.0 x 103 kg truck northbound at a velocity of 35 km/h. if these two vehicles lock together upon collision, what is the initial velocity of the vehicles after collision? (7.2 m/s 37o w of n) 2. a 6.2 kg object heading north at 3.0 m/s collides with an 8.0 kg object heading west at 3.5 m/s. if these two masses stick together upon collision, what is their velocity after collision? (2.4 m/s 56o w of n) 3. a 4.0 x 104 n truck moving west at a velocity of 8.0 m/s collides with a 3.0x104 n truck heading south at a velocity of 5.0 m/s. if these two vehicles lock together upon impact, what is their velocity?(5.0 m/s 25o s of w)

Answers

The velocity of vehicles after the collision is 15.82m/sec if car mass is 1.4 × 10³kg and truck mass is 2×10³kg

We know that we need to conserve the momentum of watermelon in a certain direction. Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.

We know that momentum =mass × velocity

So,initial momentum of car is =1.4 × 10³kg × 37km/hr

Similarly,,initial momentum of truck=2×10³kg × 35km/hr

Now,it is given that both vehicles lock together,so total mass of both vehicles is =1.4 × 10³kg +  2×10³kg=3.4 ×10³kg

Assume final velocity of both vehicle is v

So,following the law of conservation,we get

=>1.4 × 10³kg × 37 + 2×10³kg × 35 = 3.4 ×10³ ×v

=>51.8 ×10³ + 2×10³=3.4×10³ ×v

=>53.8 ×10³ kg-m/sec = 3.4×10³ ×v

=>v = 53.8/3.4

=>v=15.82m/sec

Hence,final velocity of both vehicle after collision is 15.82m/sec.

To know more about velocity,visit here:

https://brainly.com/question/18084516

#SPJ4

WILL GIVE BRAINLY IF RIGHT
what would happen if you dropped, at the same time, particles of different shapes from a boat into still water

Answers

Explanation:

If you dropped particles of different shapes from a boat into still water, they would fall straight down due to the force of gravity. The speed at which they fall would depend on their mass and the shape of the particles could affect how they move through the water, but ultimately they would all sink to the bottom of the water body. If the particles are buoyant, they may float instead of sinking.

The diagram below represents a wave.
What is the speed of the wave if its wavelength is 3.0 m?

Answers

The speed of the wave is determined as 18 m/s.

option D is the correct answer.

What is the speed of the wave?

The speed of the wave is the rate of change of wave's displacement with time.

The speed of the wave is calculated by applying the formula relating speed, wavelength and frequency of the wave as shown below.

v = fλ

where;

v is the speed of the wavef is the frequency of the waveλ is the wavelength of the wave

The frequency of the wave is calculated as follows;

f = 1 / T

where;

T is the period of the wave

The period of a wave is the time taken for the wave to complete one cycle.

In the picture given, 3 cycles of the wave = 0.5 s

1 cycle of the wave = ?

= 0.5 s / 3

= 0.16667 s

f = 1 / T

f = 1 / 0.16667

f = 6 Hz

The speed of the wave is calculated as follows;

v = fλ

v = 6 Hz  x  3 m

v = 18 m/s

Learn more about speed of wave here: https://brainly.com/question/2142871

#SPJ1

if we have a system that uses 5 volts with a frequency of 1ghz and the power used is 3 watts, what is the power draw when we increase the frequency to 3ghz?

Answers

Processor-A uses 20 W of power components and 80 W cpu dynamic power 3 GHz.

Static power: What does that mean?

When there is no design activity occurring, static power—also known as "leakage"—is used up. It closely relates to the transistor's idle current, which is based on the transistor's characteristics.

Power is it static or is it dynamic?

While leakage, or the current that passes through a transistor while there is no activity, makes up static power, switching or short-circuit power are components of dynamic power. Any of the following things may influence each power component's value: Activity. Frequency.

To know more about  static power visit:

https://brainly.com/question/26609519

#SPJ4

a car accelerates uniformly from rest to 25 m/s over a distance of 30 meters. what is the acceleration of the car?

Answers

Answer:

a=25/24 m/s^2

Explanation:

I’m going to assume you mean the final velocity is 25m/s.

v^2=u^2+2as

625=0+2a300

a=25/24 m/s^2 or 1.0416^_ (period 1) ^m

5. if the star sirius emits 23 times more energy than the sun, why does the sun appear brighter in the sky? include the terms luminosity and apparent brightness in your response.

Answers

The star Sirius is indeed brighter but our Sun appears to be brighter because it is closer to us.

The intrinsic luminosity of Sirius is exactly 25.4 times more than the sun but if we compare the distances of these stars, Sirius is 8.6 light years away from us and the Sun is just 8 light minutes away from us. This marks the obvious reason why our Sun appears more bright.

Even mathematically, it can be justified as the apparent brightness of any luminous object depends on the inverse square of the distance of that luminous object. Therefore the sun's light energy dominates our sky and we can't see any traces of Sirius from the earth.

Learn more about the star Sirius on

https://brainly.com/question/15851246?referrer=searchResults

#SPJ4

a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. How much work was done by the dog ?

Answers

The work done by the dog is 0.81J.

What is work done?

Work done is a measure of energy expended in moving an object; most commonly calculated by multiplying the force by the distance.

It is said that no work is done if the object does not move.

The work done on an object is the amount of energy transferred to an object through work.

According to this question, a dog lifts a 0.75 kg bone straight up through a distance of 0.11 m. The force applied to break the bone must be calculated first as follows:

Force = mass × acceleration

Force = 0.75kg × 9.8m/s²

Force = 7.35N

Work done = 7.35N × 0.11m = 0.81J

Therefore, 0.81J is the work done by the dog.

Learn more about work done at: https://brainly.com/question/2750803

#SPJ1

two planets are identical, except planet x has an atmosphere of mostly nitrogen and planet y has an atmosphere of mostly carbon dioxide. what can you determine about the planets

Answers

Two planets are identical, except planet x has an atmosphere of mostly nitrogen and planet y has an atmosphere of mostly carbon dioxide therefore what we can determine about the planets is that x is Earth while y is Venus.

What is Atmosphere?

This is referred to as the envelope of gases surrounding the earth or another planet and it makes life possible by providing different organisms with air to breathe

In the atmosphere of the planet Venus there is a high concentration of carbon dioxide as it is made up of  it is made of 96.5% of CO₂ and a 3% of nitrogen.

On the other hand in the atmosphere of the planet Earth, there is a high concentration of nitrogen which is about 78% and is therefore the reason why they were chosen as the correct choices.

Read more about Atmosphere here https://brainly.com/question/24925283

#SPJ1

John walks to the pizza place for lunch. He walks 2 km north, then 1 km east. To get home, he walks 2 km west and 1 km south. What distance did he travel? What is his displacement?

Answers

Answer:

The total distance covered is 3 km and the displacement is 2.24 km.

Explanation:

For the total distance covered by Anthony, we just add all of the distances.

1 km (going east) + 1 km (going east again) + 1 km (going south) = 3 km

Hence, the his total distance covered when he went to the pizza place is 3 km.

Solving for the displacement is a different matter. We cannot just add all of the distances. From analysis of the problem, Anthony traveled and formed a right triangle. He traveled 1 km east twice, making it 2 km east in total, then he traveled 1 km south.

When dealing with a right triangle with 2 sides given (for this problem the two sides are the 2 km east and the 1 km south), we use the Pythagorean Theorem.

Solution:

c² = a² + b²  (Pythagorean Theorem)

c will be the longest side of the right triangle

a and b will be the other sides of the right triangle

c = √ (a² + b²)

c = √ (2² km + 1² km)

c = √5 km

c = 2.2361 km ≈ 2.24 km

Therefore, the displacement of Anthony is 2.24 km.

Read more about right triangle here:

brainly.ph/question/2449553

Know more about Pythagorean Theorem here:

brainly.ph/question/77971

1. Find the force due to gravity if the mass of the object is 2300 kg
and the mass of the other object is 4000 kg. The distance
between the two objects is 0.150 m.

Answers

The force due to gravity will be 0.0272 Newtons.

What exactly does gravitational force signify?

The force between two mass-containing objects that are drawn toward one another is referred to as the gravitational pull. There is gravity everywhere around us. For instance, it maintains the planets in our solar system in orbit around the Sun. Additionally, because to gravity, the Moon maintains its orbit around the Earth.

How to calculate gravitational force in the above question?

Despite being weak and appealing, gravitational forces exist.

Given, mass of one object= 2300 kg

mass of another object= 4000 kg

distance between the two objects= 0.150 m

value of G is universal, [tex]G= 6.67[/tex]×[tex]10^{-11}[/tex] [tex]N m^{2} / kg^{2}[/tex]

the equation is, [tex]F=G\frac{M1 . M2}{d^{2} }[/tex]

                       [tex]F=0.0272 N[/tex]

To know more about Gravitation visit

https://brainly.com/question/3009841

#SPJ4

Other Questions
javascript can be used for a. validation of data entered by a user b. any or all of the above c. computations based on user input d. changing the look and feel of a web page Write three paragraphs in response to a self-selected fictional text. In the first paragraph, introduce the text, author, key chart describe the options that you have if the goods that you receive as a buyer are nonconforming to the goods described within a written sales contract? Let f(x) be a 4th-degree polynomial function with zeroes 1,-1, and 3-i. If f(0)=20, write the equation in:a) Factored formb) Standard form Jin went to the grocery store and bought bottles of soda and bottles of juice. Eachbottle of soda has 25 grams of sugar and each bottle of juice has 15 grams of sugar.Jin purchased a total of 16 bottles of juice and soda which collectively contain 300grams of sugar. Graphically solve a system of equations in order to determine thenumber of bottles of soda purchased, x, and the number of bottles of juicepurchased, y. The first detailed and quantitative studies on inheritance were carried out by an Austrian monk named _____. A. Mendel B. Darwin C. Mendeleev D. Benedict typically result(s) in the acquiring firm being able to prevent valuable human resources in the acquired firm from leaving. a. financial slack b. private synergy c. high compensation d. friendly acquisitions when stomata is closed what happen to plants your broker requires an initial margin of $4,000 per futures contract on soybeans and a maintenance margin of $3,000 per contract. soybean futures contracts are based on 5,000 bushels and quoted in cents per bushel. yesterday, you bought six soybean futures contracts at the closing settlement price of 1380. today, the settlement quote is 1335. all margin calls restore margin levels to their initial margin level. will you receive a margin call and, if so, for what amount? High-purity benzoic acid (C6HCOOH; AHxn for combustion = -3227 kJ/mol) is used as a standardfor calibrating bomb calorimeters. A 1.221-g sample burns in a calorimeter (heat capacity = 1365 J/C) that contains exactly 1.240 kg of water. What temperature change is observed? blunk is a service that allows users to send updates through posts that contain only a few words. these updates are sent to the users who have signed up to receive them. blunk can be regarded as a(n) . Which of the following identifies a treatment method developed after the discovery of germ theory?O Perform a bloodletting procedure.O Recommend frequent hand washing.O Induce the patient to vomit.O Treat the infection with an antibiotic. Carbon8 Corporation wants to raise $120 million in a seasoned equity offering, net of all fees. Carbon8 stock currently sells for $28.00 per share. The underwriters will require a fee of $1.25 per share, and indicate that the issue must be underpriced by 7.5%. In addition to the underwriters fee, the firm will incur $785,000 in legal, administrative, and other costs. How many shares must Carbon8 sell in order to raise the desired amount of capital? how did expansion help the unites states economically and militarily. when the northern hemisphere is tilted toward the sun, how does this affect the length of our day? compare the time it takes for light to travel 1000 m on the surface of the earth and in outer space. how much energy (in j) must the shock absorbers of a 1180 kg car dissipate in order to damp a bounce that initially has a velocity of 0.760 m/s at the equilibrium position? assume the car returns to its original vertical position. PLEASE ANSWER ASAP! I'M DESPERATE!! Why do you think colonial leaders might have supported people who practice different religions living together? And what are some examples of religious tolerance in modern America? please hurry too... im giving out 100 points Which one of the following teacher statements most clearly reflects a cultural lens as the textbook uses the term?a. "What are some possible reasons why Christopher Columbus risked his life by sailing off into uncharted seas?"b. "People who live in the Andes of South America have very different lifestyles from people who live in the Central American desert. In what ways might their lifestyles be related to their differing environments?"c. "Pushing Rachel off the slide was unacceptable behavior. Fortunately, she wasn't badly hurt."d. "Marie's parents are really irresponsible. They can never seem to get to parent-teacher conferences on time." Consider the market for milk. Suppose a government study is published that says milkcan prevent cancer and other diseases. Shift the demand curve left or right to reflectthe impact on demand for milk as a whole.