An object is moving along a circular track of radius 7 m with constant speed 11 m/s. Its average velocity after 8 second of the start is

[tex] \large{ \underline{ \underline{ \bf{ \purple{Given}}}}}[/tex]

[tex] \large{ \underline{ \underline{ \bf{ \green{To \: find}}}}}[/tex]

[tex] \large{ \underline{ \underline{ \red{ \bf{Now, \: What \: to \: do?}}}}}[/tex]

We can solve the above question using the three equations of motion which are:-

So, Here a is acceleration of the body, u is the initial velocity, v is the final velocity, t is the time taken and s is the displacement of the body.

[tex] \large{ \bf{ \underline{ \underline{ \orange{Solution:}}}}}[/tex]

We are provided with,

By using 1st equation of motion,

⇛ v = u + at

⇛ v = 250 + (-3)45

⇛ v = 250 - 135 m/s

⇛ v = 115 m/s

✤ Final velocity of mobile = 115 m/s

━━━━━━━━━━━━━━━━━━━━

Answer: ear phones

Explanation:

You can physically hold ear phones, but you can't hold music, sunlight, or heat.

Answer:

11.25 amps

Explanation:

For transformers, the magnetic flux

[tex]\Phi _{max} = \beta \times A[/tex]

Therefore;

[tex]\Phi _{max} = 0.6 \times 0.35 = 0.21 \ Weber[/tex]

Ф = Фmax (cosωt) = 0.21·(cos(5·t))

From Faraday's law of induction, we have;

ε = -N × dΦ/dt

Which gives;

dΦ/dt = -1.05(sin (5t) )

ε = -N × dΦ/dt = -50× -1.05(sin (5t) )

ε = 52.5(sin (5t) )

I = ε/R = 52.5(sin (5t) )/3.3 = 15.9091(sin (5t) ) amps

The peak current is therefore = 15.9091 amps

The rms current = Peak current /√2 = 15.9091/(√2) = 11.25 amps.

Answer:

0.54mm

Explanation:

Given the following :

Wavelength (λ) of Soundwave in air = 0.12mm

Velocity of sound wave (v) = 340m/s

Calculate the frequency (f) :

v = fλ

Wavelength to metres

1000mm = 1 m

0.12mm = (0.12/1000)m

= 0.00012m

v = fλ

340 = F * 0.00012

f = 340 / 0.00012

f = 2833333.3 Hz

Wavelength of Soundwave in the patient:

Velocity of sound wave through body tissue = 1540m/s

Therefore,

Using v = fλ

λ = v / f

λ = 1540 / 2833333.3

λ = 0.0005435m

λ = (0.0005435 * 1000)mm

λ = 0.5435mm = 0.54mm

The distance between neighbouring, identical wave components, such as adjacent compressions, determines a sound's wavelength. The number of waves passing a spot in a given amount of time is known as the frequency, which is the same as the source's frequency.

Wavelength (λ) of Soundwave in air = 0.12 mm

Velocity of sound wave (v) = 340m/s

Calculate the frequency (f) :

v = fλ

Wavelength to metres

1000 mm = 1 m

0.12 mm = (0.12/1000)m

= 0.00012 m

v = fλ

340 = F × 0.00012

f = 340 / 0.00012

f = 2833333.3 Hz

Wavelength of Soundwave in the patient:

Sound waves travel through body tissue at a speed of 1540 m/s.

Therefore, Using v = fλ

λ = v / f

λ = 1540 / 2833333.3

λ = 0.0005435m

λ = (0.0005435 × 1000)mm

λ = 0.5435mm = 0.54 mm

Learn more about wavelength here:

https://brainly.com/question/13533093

#SPJ5

Answer:

The factor that determines the mechanical advantage (or ideal mechanical advantage (IMA) - in the absence of frictional forces) in a simple machine is the ratio perpendicular distance of the applied force to the fulcrum to the perpendicular distance of the load to the fulcrum

The mechanical advantage can therefore by larger than 1 (requiring less force per load), or equal to 1 (effort equal to load) or less than 1( effort more than load)

Explanation:

Answer:

My answer is radiant energy to chemical energy because it uses the sun which is a form of solar energy and then converts the food to chemical energy for the plant itself

Answer: Radiant energy to chemical energy

Explanation: Right on edge2021

Answer:

B.

Explanation:

as there is a '-' sign before the magnification value, it forms a real image.

so the last two options get cancelled.

as the value of magnification is 0.87 ie. lesser than 1, we can say that the image is smaller.

The type of image is formed by a lens if m = -0.87 would be smaller than the object and the object is real

A lens is a transmissive optical tool that employs refraction to focus or disperse a light beam. The power of the lens is expressed in the dioptre which is the reciprocal of the focal length of the lens.

The image formation through the lens is calculated with the help of the lens formula given as follows

1/f = 1/v - 1/u

where f is the focal length of the lens

u is the distance of the object from the lens

v is the distance of the image formed from the

magnification (m) = size of image /size of the object

As given in the problem image is formed by a lens if m = -0.87

Thus, the negative sign represents that the image formed by the object is real, and the magnitude of the magnification is less than 1 this represents that size of the image is smaller than the size of the object.

Learn more about the lens from here

https://brainly.com/question/766997

#SPJ2

Answer:

Diameter of Wire = 4.5 mm

Explanation:

First, we need to find the fractional part of the reading. The fractional part o the reading can be given by the following formula:

Fractional Part = Circular Scale Reading x Least Count

where,

Circular Scale Reading = 50

Least Count = 0.01 mm

Therefore,

Fractional Part = (50)(0.01 mm)

Fractional Part = 0.5 mm

Now, the diameter of the wire can be given by using the following formula:

Diameter of Wire = Linear Scale Reading + Fractional Part

Diameter of Wire = 4 mm + 0.5 mm

Diameter of Wire = 4.5 mm

Explanation:

Average speed = distance / time

v_avg = 47 km / 1.72 hr

v_avg = 27.3 km/hr

Answer:

14.07 units of joules is removed for each joules of electricity used

Explanation:

The heated room temperature [tex]T_{c}[/tex] = 61 °F

The outside temperature [tex]T_{h}[/tex] = 98 °F

For conversion from fahrenheit to kelvin we use the equation

(32°F − 32) × 5/9 + 273.15

[tex]T_{c}[/tex] = 289.26

[tex]T_{h}[/tex] = 309.82

For air conditioning,

COP = [tex]\frac{T_{c} }{T_{h} -T_{c} }[/tex]

COP = [tex]\frac{289.26 }{309.82 -289.26 }[/tex]  = 14.07

This means that 14.07 units of joules is removed for each joules of electricity used

Answer:

V is greater

Explanation:

because v intial at that time V final is the that speed which it is going at that time

Answer:

F = 0.408 N

Explanation:

It is given that,

Weight of a wooden block, W = 8 N

Weight, W = mg

m is mass of wooden block

[tex]m=\dfrac{W}{g}\\\\m=\dfrac{8\ N}{9.8\ m/s^2}\\\\m=0.816\ kg[/tex]

Acceleration of the block, a = 0.5 m/s²

Force, F = ma

[tex]F=0.816\ kg\times 0.5\ m/s^2\\\\F=0.408\ N[/tex]

So, the magnitude of force applied to the wooden block is 0.408 N.

Answer:

The velocity of the stone is 2.57 m/s.

Explanation:

Given that

Height = 0.337 m

We need to calculate the velocity of the stone

Using equation of motion

[tex]v^2-u^2=2gh[/tex]

Where, v = velocity of stone

u = initial velocity

g = acceleration due to gravity

h = height

Put the value into the formula

[tex]v^2-0=2\times9.8\times 0.337[/tex]

[tex]v=\sqrt{2\times9.8\times0.337}[/tex]

[tex]v=2.57\ m/s[/tex]

Hence, The velocity of the stone is 2.57 m/s.

Answer:

The input power is [tex]44.4\times10^{3}\ kW[/tex]

Explanation:

Given that,

Time = 15 min

Volume of water = 30 m³

Height = 40 m

Efficiency = 30%

Density of water = 1000 kg/m³

Suppose, acceleration due to gravity = 10 m/s²

We need to calculate the mass of water pumped

Using formula of mass

[tex]Mass = Volume\times density[/tex]

Put the value into the formula

[tex]Mass=30\times1000[/tex]

[tex]Mass=3\times10^{4}\ kg[/tex]

We need to calculate the output power

Using formula of power

[tex]P_{out}=\dfrac{W}{t}[/tex]

[tex]P_{out}=\dfrac{mgh}{t}[/tex]

Put the value into the formula

[tex]P_{out}=\dfrac{3\times10^{4}\times10\times40}{15\times60}[/tex]

[tex]P_{out}=\dfrac{4}{3}\times10^{4}\ Watt[/tex]

We need to calculate the input power

Using formula of efficiency

[tex]\eta=\dfrac{P_{out}}{P_{in}}[/tex]

[tex]P_{in}=\dfrac{P_{out}}{\eta}[/tex]

Put the value into the formula

[tex]P_{in}=\dfrac{4\times100\times10^{4}}{3\times30}[/tex]

[tex]P_{in}=\dfrac{4\times10^{5}}{9}\ Watt[/tex]

[tex]P_{in}=44.4\times10^{3}\ kW[/tex]

Hence, The input power is [tex]44.4\times10^{3}\ kW[/tex]

Answer:

Explanation:

The velocity ratio of  a wheel and axle is the ratio of the radius (R) of the wheel to the radius (r) of the axle. It is expressed as;

VR = R/r

Since radius = diameter/2

VR = (D/2)/(d/2)

VR = D/d

D is the diameter of the wheel and 'd' is the diameter of the axle.

Given VR = 3 and d = 5cm

3 = D/5

D = 15 cm

If the diameter of the wheel is 15cm, the radius of the wheel will be 15/2 = 7.5cm.

b) Workdone by the load = Load * distance moved by load

Given load = 60kg

Distance moved by load = 2π*radius of axle

Distance moved by load  = 2π(0.025) = 0.157

workdone by load = 60* 0.157 = 9.42J

Effort = Workdone by load/distance moved by the wheel

Effort = 9.42/2π(0.075)

Effort = 9.42/0.471

Effort = 20kg

Hence the effort applied is 20kg

c) MA = Load/Effort

MA = 60/20

MA = 3

d) Efficiency = MA/VR * 100%

Efficiency = 3/3 * 100%

Efficiency = 100%

Answer:

266. 4

Explanation:

acceleration due to vravity on earth is 10m/s.

One third of it is (1/3)*10

=3.333m/s.

Weight is mass × acceleration

weight= 80kg÷ 3.333m/s

W= 266.4 Newton.

Answer:

The distance the car travels is 115500 m in S.I units

Explanation:

Distance d = vt where v = speed of the car and t = time taken to travel

Now v = 99 km/h. We now convert it to S.I units. So

v = 99 km/h = 99 × 1000 m/(1 × 3600 s)

v = 99000 m/3600 s

v = 27.5 m/s

The speed of the car is 27.5 m/s in S.I units

We now convert the time t = 70 minutes to seconds by multiplying it by 60.

So, t = 70 min = 70 × 60 s = 4200 s

The time taken to travel is 4200 s in S.I units

Now the distance, d = vt

d = 27.5 m/s × 4200 s

d = 115500 m

So, the distance the car travels is 115500 m in S.I units

Answer: 9.675 Hz .

Explanation:

Given, velocity of waves = 12.9 m/s

Length of string = 2.00 m

Let [tex]\lambda[/tex] be the wavelength , then for 3 loops

[tex]\dfrac{3}{2}\lambda= \text{length of string}\\\\\Rightarrow\ \dfrac{3}{2}\lambda= 2\ m\\\\\Rightarrow\ \lambda= \dfrac{4}{3}\ m[/tex]

Now , velocity = frequency x wavelength

Then, frequency = [tex]\dfrac{velocity}{wavelength}[/tex]

[tex]=\dfrac{12.9\times3}{4}\\\\=9.675\ Hz[/tex]

hence, it will create standing waves with 3 loops at 9.675 Hz .

Answer:

It will fall at the same speed in both locations

Explanation:

When an object is falling, it is accelerated to the same degree irrespective of the height from which it is falling.

All objects on the earth's surface experience an acceleration due to gravity. This acceleration due to gravity is the same for all objects irrespective of their height or mass.

Hence for a stone dropped from the same height as Terai and the top of a mountain, the acceleration due to gravity is the same in both cases hence they will fall at the same speed.

Answer:

They are:

1) change position

2) distract yourself

3) Get fresh air

4) Face the direction you are going.

5) Drink water.

6) Play music.

7) Put your eyes on horizon.  

Explanation:

Hope it helps.

Answer:

a. [tex]2.54 \times 10^{21} NC^{-1}[/tex]

b. Outwards

Explanation:

The computation is shown below:

a. The magnitude could be computed by applying the following formula

Electric field, E is

[tex]= \frac{kq}{r^{2}} \\\\ = \frac{9\times10^{9} \times86\times1.6\times10^{-19}}{(6.98\times10^{-15})^2}[/tex]

[tex]= 2.54 \times 10^{21} NC^{-1}[/tex]

b. As we can see that there is a positive charge so the direction would be in the outward direction in the electric field i.e. produced by the protons

Basically we applied the above formula for the first part

Answer:

Explanation:

hThe media calls the Higgs boson the God particle because, according to the theory laid out by Scottish physicist Peter Higgs and others in 1964, it's the physical proof of an invisible, universe-wide field that gave mass to all matter right after the Big Bang, forcing particles to coalesce into stars, planetsig

Answer:

O- to track how fast a heart beats

Explanation:

Answer:

80 cm.

Explanation:

Since the metre rule is 1 m i.e 100 cm it means that the mass of the metre can be obtained at the 50 cm mark.

But the metre is pivoted at the 60 cm.

Please refer to the attached photo for details.

In the attached photo, y is the distance between the mark (that will balance the metre rule when a 50 g mass is hunged) and the pivot.

Thus, we can obtain the value of y as follow:

Anticlock wise moment = Clock wise moment

Anticlock wise moment = 100 × 10

Clock wise moment = y × 50

Anticlock wise moment = Clock wise moment

100 × 10 = y × 50

Divide both side by 50

y = (100 × 10) /50

y = 20 cm

Now, to obtain the mark, B that will balance the metre, we simply add 20 cm to 60 cm ie

B = 60 + 20

B = 80 cm

Answer:

A. It is always a positive force

Explanation:

Hooke's law describes the relation between an applied force and extension ability of an elastic material. The law states that provided the elastic limit, e, of a material is not exceeded, the force, F, applied is proportional to the extension, x, provided temperature is constant.

i.e F = - kx

where k is the constant of proportionality, and the minus sign implies that the force is a restoring force.

The applied force can either be compressing or stretching force.

Answer:

[tex] \boxed{ \bold{ \boxed{ \sf{39.2 \: m/ {s} \: }}}}[/tex]

Explanation:

Given,

Distance travelled ( d ) = 176.4 meters

Time taken ( t ) = 4.5 seconds

Finding the speed of a cheetah

Speed [tex] \sf{ = \frac{distance \: travelled}{time \: taken} }[/tex]

[tex] \sf{ = \frac{176.4}{4.5} }[/tex]

[tex] \sf{ = 39.2 \: m/ {s} \: }[/tex]

------------------------------------------------------------------------

Let's learn about Speed :

Suppose a body moves 20 m in 2 seconds, either on a curved path or on a straight path. So , 10 m is the distance travelled by the body in each second which can be written as 10 m/s. This is called speed of the body. Thus, Speed is defined as the distance travelled per unit time. It is the rate of distance travelled by a body.

Mathematically,

[tex] \boxed{ \bold{ \sf{speed = \frac{distance \: travelled}{time \: taken} }}}[/tex]

In SI system, the unit of distance is metre and time is second. Thus , the SI unit is speed is m/s.

Hope I helped!

Best regards!!

Answer:

The magnification of the lens is 21

Explanation:

Please see full answer in the attached image since the system kept on refusing to accept my typed answer complaining of bad use of words or presence of a link.

The magnification of the lens is m = 21

Answer:

its 21 for Acellus

Explanation:

Answer: Alicia and the president do not have enough of a particular resource. Alicia doesn’t have enough time, and the president doesn’t have enough money.

Explanation: This is Plato's sample answer.

Answer:

Explanation:

Evolution/Advancement on the off chance that you see,then you will find this is a definitive revelation of science.It demonstrated that how people came into the world.How different creatures endure and from where they have hit on where they are today.All such things are the piece of development process.

New things advanced consistently from the past one and its a slow process.For anything to sprout you need a seed.As per the scientist,evolution is a reality and it is a steady procedure and it is happening.There are scarcely any situations where in the old harvest can yield new assortment as well.This is something many refer to as advancement only.Its a ceaseless process.Whatever comes,it accompanies certain misstep or zones of improvement,so if there happens to be a few changes would prompt improvement of new thing.

In the event that you see at an early stage,worms were available ,from where the fish came,then some went ahead land and began adjusting the progressions require to make due on land,started strolling on legs,developed lungs,then likewise there were advancement of the considerable number of things require to proceed with the life.All are the piece of development as it were.

hence,Darwin said,that natural selection can prompt evolution.This is likewise evident that so as to address the issue of food and nutrition,everybody works and as long as you get those needs,there will be development in all aspects.Similarly happened to the antiquated occasions when advancement occurred.

Hence,The development is truth and is a continuous procedure according to the science.When you go to demonstrate some case,there are consistently a point from where new methodology can be shaped and can prompt another disclosure.

If we consider the theory of evolution then we can say that it’s a proven theory, the reason people says that scientists don’t prove anything is because of the fact that they always implement “Precautionary principle” in their research finding.

Answer:

.

Explanation: